"Mission Control" does not show space row and I cannot add a new space (27 inch screen)

Firstly, "Mission Control" does not show upper row with spaces. I have configured Dashboard as space, but it is not showed either.
Second, I cannot add a new space because the upper right corner wont show an empty space.
In system I have configured (Mission Control) the upper right corner as "mission control".
I do run a 27-inch screen

I'm having the exact same problem. I have a Macbook Pro that I connect to a 27inch iMac through the mini display port. Whenever I attempt to launch Mission control to move a program to a different space, the "Spaces" dont appear at the top of the screen. Is anyone have an answer for this?
Also, does anyone know of a 3rd party program to bring "Spaces" back? That was my #1 favorite thing of Snow Leopard, and I need to get that functionality back.
Thanks

Similar Messages

Firefox 21 does not show start menu and taskbar sub-links of new tab,private window

Firefox does not show start menu icon 's submenu containing links to new tab,new window and new private window.Same happens with taskbar pinned shortcut. It does not show the above three options when I right click on it. I have installed Firefox stable,beta,aurora and nightly at the same time.All the four use different profiles.I have this setup since Firefox 12.There was no problem before v21.I tried reinstalling all the four.Resetting the stable version profile.The options do appear in othe ruser accounts.I want this option for stable version only.I think these are not available for testing versions.I tried all the suggestions in this thread:
https://support.mozilla.org/en-US/questions/943198
I am on Windows 7 64 bit.

You may be experiencing this Windows 7 bug:
* [https://bugzilla.mozilla.org/show_bug.cgi?id=870529 bug 870529] - Windows jumplist not showing anymore
<i>Please do not comment in bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html</i>

Mission Control does not work!!!!!!!!

Hi all,
I have recently Reformatted my mac and made it into 1 partition of 500gb just to run mac os x. I did it with the discs the laptop came with.
After OSx install was complete, I ran the os x lion downloaded from the app store and installed it too. After completely updating the system with software updates and my other software like ms office, vlc, flash, iLife etc.
I have found that the mission control does not work sometimes. It allows you to swipe from screen to screen but when when you swipe up.. It hides the top apple bar but nothing else happens.. Everything else is fine so far.
When I turn my mac on. If it gets stuck the only way to make it work again is to restart. Which is a bit annoying.. Plz tell me if it's a bug or something.
If that happens to someone else as well?
Thanks

Does it work ok if you create a new user?
To create a user account:
Choose Apple menu > System Preferences and click Users & Groups. Click the lock icon to unlock it, and type an administrator name and password.
Click the Add button below the list of accounts, choosing a type of account Standard is fine) from the New Account pop-up menu.

TPC-2006, Dial control does not show

I am using a TPC-2006 based on Windows CE, the problem I have is that I want to show on the panel a Dial control, but the control does not show fine, it seems that there is a problem with that, I would like to know if there is an upgrade of firmware or something that can help.
Another thing is that it is a 3D control, but in LabView PDA there is no Dial on Classic controls, would it work if I import a Dial classic control?
Best regards,
Gilberto Garza
Asesor Electrico, Mexico
Gilberto Garza Gzz.
Certified LabView Developer
Asesor Electrico, S.A. de C.V.

Yes, the dial control displays in a funny way, I mean, the circle of the dial does not appear, even if I colour it in labview it does not show in the display of the TPC2006. The only thing that appears in the screen is the label of the numbers of the dial, and the indicator of the position of the dial, but when you move the position of the dial, it seems that the screen does not refresh the movement and it leaves the marks where the line of the position was before.
Right now I don't have with me the equipment, I found this bug in the offices of NI in Mexico, but as I will work with this kind of displays It is very interesting to me that it works fine.
Best regards,
Gilberto Garza
C.L.D.
Gilberto Garza Gzz.
Certified LabView Developer
Asesor Electrico, S.A. de C.V.

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!

I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments.

Why did ps touch does not show saved project and my old project disappear?

Why did ps touch (ipad 4) does not show saved project and my old project disappear?

OldGhias,
Have you found a solution yet? I don’t know if I will be of any help but I was curious and no one else has chimed in yet.
I don’t quite understand all of your statement.
To clarify, you were making SimpleSave backups from Win95 and cannot see them all on the Win7 laptop?
Or
You were copying files over (SimpleSave utility not used) and you cannot see those files on Win7 but you can on the Win95 machine?
Do you have another Win7 machine you could connect the external to, to see if the files are still not showing (one that is not locked for work)?
On the drive that shows full, can you see it in Disk Management showing the correct size of the drive and also another CD drive? Not your real CD/DVD drive, it’s actually a CD emulator that is attached to the HDD for encrypting the backups and all SimpleSave’s have them.
Lastly, did you reformat the SimpleSave drive to Fat32 first?
My understanding is that USB support was quite limited on Win95 machines. Since Win95 is Fat32 and the SimpleSave drive is by default NTFS, I would think it would not work.

HT4972 i got my new iphone 4s , can not download the OS 5 it says error 9006 on my windows 7. also the phone does not show the capacity and serial number details on the itunes summery ?? please help

i got my new iphone 4s , can not download the OS 5 it says error 9006 on my windows 7. also the phone does not show the capacity and serial number details on the itunes summery ?? please help

Hi Kevin,
The iPhone 4S comes automatically loaded with iOS 5, and any updates after iOS 5.0 can be completed directly from on the phone in Settings > General > Software Update. If you are having trouble using iTunes to update software, I suggest you reset iTunes so that you can pair your phone to the computer again, because if you can't see the serial number and capacity, that generally means your phone isn't paired. For any problems this doesn't fix, please contact Apple directly through their automated help line, 1(800)MYAPPLE.

Sort control does not show in drill down ?

I have a sort control attached to a column header in one of my report and it works fine. However it does not show up in the drill down sections. Is there a way to fix that ?
Thanks

I am sorry if my question was not clear of i am misunderstanding your solution.
My sort control shows up in the grouped data but does not show up in the drill down page after drilling down. what can i do for the sort control to show up in the drilled down page

Analysis does not show all rows returned by SQL

Hi.
OBIEE 11.1.1.7.0
I have a strange problem. I have a simple table that should return customer number and sales. The report will show all of the sales, but it does not show all the customer numbers. The SQL that OBIEE creates does return all of the customer numbers. When I remove the sales and just include the customer number, the report only shows a couple of the customer numbers (it should show several hundred).
I guess what I'm looking for is any advice for how to debug this. I have spent about 3 days on this problem, so I have tried to look at it from every angle (data, RPD, report).
Any suggestions are appreciated.
Thank you.

Thank you for your reply.
New development. The issue has to do with a descriptor ID column. The customer number column is a varchar field and I set the descriptor ID column to the column_ID field. When I remove the descriptor ID setting, I received all custom numbers.

Exporting pdf does NOT show my headers and footers

I export number files to my administrators. I've noticed when I print my file directly from my computer in iWork/Numbers it prints and show the footer and header. However, when I send a bcc to myself when I attach the pdf file to my administrator, it does not show or print my headers and footers. Any ideas?

Re-reading the original question, it does appear that Gogoette is exporting to PDF then attaching the file to an email versus using the "Send via email as PDf" operation. In that case, setting it to Page View for the export will solve the problem. I had originally thought "Send via email as PDF" was being used. What I noticed is that it doesn't give you the choice of page versus sheet view but if you first go through the motions of exporting, it sets it up. In prior threads about exporting to PDF, we have all recommended using Print, not export, and choosing Print to PDF (rather than to a printer) as the best way to create a PDF. It gives more flexibility, such as allowing you to choose which pages to "print to PDF".

HT4623 My iPhone 4S does not show ringer bar and i now need to use ear phones to listen to music

My iphone 4s is not showing ringer bar and i cant listen to music without earphones

Hey chirambab,
Thanks for the question. I understand you are experiencing issues with your iPhone 4s in regards to audio.
The following resource may provide a solution:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
1. Verify that the volume is set to a level you would normally be able to hear.
2. Ensure that there is nothing plugged in to the headset jack or the dock connector.
3. If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
4. Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
5. If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
6. If the iPhone is paired with a Bluetooth headset or car kit:
- Try turning off Bluetooth.
- If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
7. Restart the iPhone.
8. If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
9. If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
If the issue persists, please follow the last step by contacting Apple Support for support and service options.
Thanks,
Matt M.

Aperture does not show tick box for shared photo stream as promised on the help screen

I try to configure Aperture for iCloud shared Photo Stream. According to the help screen, I should select Preferences and see a panel with 4 tickboxes. The first three relate to My Photostream and work fine on all my devices. The crucial fourth tick box for sharing with others however does not show however. What else should I set-up to see the 4th tick box ?

You need:
'A Mac with OS X v10.8.2 or later and iPhoto 9.4 or later or Aperture 3.4 or later'
http://help.apple.com/icloud/#mmbc402b84

My Contct app on my Ipad2 does not show the button on bottom to add contacts. how do I fix this?

My Contact app on my Ipad2 does not show the "plus" + button on the bottom to add contacts. How do I fix this?
Thanks

Settings-iCloud-contacts=on.

I have a Rocketfish mini display port to VGA adaptor cord for a macbook pro, it was working fine the first week, now it does not show what I am seeing on my laptop on my lg Flat screen tv. It only shows the space background but not any icons. Any help??

Is there anything I should do to the TV or any settings i should do from my actual Macbook? It only shows the space background but not any of my icons or what i am seeing on my laptop screen. It is a new adaptor which was purchased last week.

It seems as though though it may be a connection issue, possibly hardware or adapter. Make certain the connections are TIGHT.
For software you may try a smc reset:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Try a pram reset:
Shut down your Mac.
Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on your Mac.
Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears. Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
Release the keys.
If no joy you can take it in to an Apple store genius bar for a free evaluation make an appointment first.
http://www.apple.com/retail/geniusbar/

Project View does not show the Path and Filename when errors occur

I have the problem, that errors occur in the project but in the colum that shows the "Resource" I can only see the "Project Name". Normally it should show the filename. The "Path Column" is completely empty. The "Location column" shows the correct line number in the file (but unfortunately I have no Idea which file). Double clicking on the row does not do anything.
I'm sure it had worked, but no idea since when this problem occurs. I am using Flash Builder 4.7.

I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments.

"Mission Control" does not show space row and I cannot add a new space (27 inch screen)

Similar Messages

Maybe you are looking for