Mission Control not loading
Since upgrading to Yosemite, I can't load mission control:
- The fingers up move on the track pad doesn't do anything.
- The hot corners do not work.
- When I select an app in the dock, it doesn't go to the right space anymore.
- I can't add / remove spaces, the icons for it do not appear.
When I try to load mission control nothing happens, it quits instantly: no error, no console output, etc.
I have attached a trace of the app, in case it can help find what is wrong: http://pastebin.com/0FRFf3Q8
I have no idea where to look!
Can anyone run a trace of "Mission Control" for me? I want to see what it does as mine is not working at all.
The steps are as follow:
1) kill mission control so it's not running
sudo killall "Mission Control"
2) open a shell and type:
sudo dtruss -afs -n "Mission Control" > ~/Desktop/trussoutput.txt
3) load mission control
by clicking on the icon..
The output of the shell will go to a file called 'trussoutput.txt' on your desktop; if you could send me that file, or put the contents on pastebin.com, it would help be greatly in trying to figure out what is happening. Mine seems to be stopping abruptly after loading the GSS library...
thanks!
Similar Messages
-
HT4689 Can we make mission control not stack the windows of the same app?
I often have multiple Word windows open and it's very hard to find the one I need when they are stacked in Mission Control. I like the fact that with a four-finger swipe you can see all the open programs, but it's not quite useful if apps are stacked (so I can't find which is which), and minimized apps apps are not shown.
In comparison, MS Windows makes it easier to locate an open program although less fancy-looking.Hi keclear,
If you would prefer that Mission Control not stack the open windows for each application, you may want to turn off the "Group windows by application" setting. You may find the following article helpful:
OS X Mountain Lion: Mission Control preferences
http://support.apple.com/kb/PH10850
Cheers,
- Brenden -
OS X (10.8.3) Mission Control not working properly.
On my 13" MacBook Pro running 10.8.3; Mission Contol no longer funcitons properly.
Three finger swipe up: only intermitently shows thumbnails of running applications. Never shows a thumbnail or Safari.
Most of the time, however, I am presented with application icons instead of thumnails. Again, a Safari window thumbnail or icon fails to show up.
Three finger swipe down: functions properly.
Is there a way to reset Mission Control?
Is this an issue others are experiencing?Thanks for replying so quickly pal, but I actually seemed to have solved my own problem.
For anyone who has been having the same issue that I did, follow these steps:
1) go to your 'contacts' app and remove your email address from your own 'card'
(not sure if this is necessary) 2) remove apple id from user & preference profile
Cheers -
Bug: Previews in Spaces/Mission Control not visible
I've noticed a bug with Mountain Lion's Spaces/Mission Control. Sometimes when I enter MC, the previews of spaces up top don't appear (1st attachment) until I swipe to a full-screen space (2nd attachment). A restart or log out/log in resolves it but eventually the problem comes back.
I'm on OS X 10.8.2Third party software conflict.
-
SubVI or controls not loaded - missing files from location misc.llb
When I try to load VI in Labview 2012, I get several errors for missing files:
C:\Program Files (x86)\National Instruments\NI ELVISmx\misc.llb\subRecordEEPROMValues.vi
C:\Program Files (x86)\National Instruments\NI ELVISmx\misc.llb\subGetDevProductType.vi
C:\Program Files (x86)\National Instruments\NI ELVISmx\misc.llb\ctl_ProductType.ctl
Why am I missing these required files?
Solved!
Go to Solution.kdoggett
The VI you're using sounds like it's using those subVIs and they're not in those locations. This can be because of a custom install where the path is not that one, or it could be a version change and those files were moved. Did you make this VI? Has it worked before? Did you install NI ELVISmx? That might be worth a shot since those are the folders that it's looking in. Just make sure the version you download in compatible until your verison of LabVIEW.
-KP
Kurt P
Automated Test Software R&D -
Mission control not showing running apps properly
When I use the three finger swipe-up, it usually shows all my running apps as normal, but sometimes they all just appear on top of each other which isn't in any way helpful. Has anybody else experienced this?
Which appear on top of each other? All Applications, or all windows of an Application?
The latter is normal. Two-finger up swipe on an app should expand them a little so that you can see them and pick one. -
Mavericks: Grid for Mission control & Expose?
Hello everyone,
I was wondering if someone could help me with the following issue: I am trying to find something (a setting, a patch, a utility?) that would lock the placement of the app previews in Exposé or within one space in mission control (not the order of spaces, for which I know there's a setting available). The reason I'm asking that is this: as we all know when you have multiple apps open in one desktop (space) and you invoke the mission control it creates a very handy way to see all the running apps and quickly switch to the one you need (or several windows of one app in exposé). HOWEVER, once you switch to another app and open the mission control again, the order of the windows is sometimes rearranged (always rearranged in exposé). This prevents me from quickly switching to apps just by remembering where their previews were located in the mission control/exposé overview the last time around and I spend additional time looking for the one I need. I searched all over internet but nobody seems to have asked this question before. Maybe there's such a simple solution that I don't see it? Any help would be greatly appreciated!
Thanks,
RobNot quite clear on the question and can't offer a solution. However, are you familiar with the TAB + COMMAND shortcut to switch through open applications? I have always found this easier than Mission Control, and may be beneficial based on this statement:
The reason I'm asking that is this: as we all know when you have multiple apps open in one desktop (space) and you invoke the mission control it creates a very handy way to see all the running apps and quickly switch to the one you need (or several windows of one app in exposé).
Thanks,
Rob
Secrets of the Command-Tab Mac Application Switcher
How to Switch Between Open Apps in OS X -
I am trying to use powerpoint but when I open a document I want to work on it does not open on my desktop. It appears as open on mission control but it disappears offscreen. How can I get it to open where i need it and can work on it?
It's almost certainly too late.
The time to create a backup is before a catastrophe. After a catastrophe, it's too late. -
I have a MacBook Pro running Yosemite.I did not shut down the computer last night. When I opened the computer this morning Dashboard in overlay was on the screen. I have not been able to get out of dashboard. I have tried esc, F12, and accessing System Preferences in the Dock. I clicked on Mission control and nothing changed. Help be get back to my desktop.
Did you try restarting the computer?
Delete com.apple.dashboard.plist file.
Quit all applications.
Option click the "Go" menu in the Finder menu bar.
Select "Library" from the drop down.
Library > Preferences > com.apple.dashboard.plist
Right click on it and select "Move it to Trash".
Restart.
If this doesn’t help, Put back the com.apple.dashboard.plist
Right click the Trash icon in the Dock and select “Open”.
Right click the com.apple.dashboard.plist and select “Put Back”. -
"Mission Control" does not show space row and I cannot add a new space (27 inch screen)
Firstly, "Mission Control" does not show upper row with spaces. I have configured Dashboard as space, but it is not showed either.
Second, I cannot add a new space because the upper right corner wont show an empty space.
In system I have configured (Mission Control) the upper right corner as "mission control".
I do run a 27-inch screenI'm having the exact same problem. I have a Macbook Pro that I connect to a 27inch iMac through the mini display port. Whenever I attempt to launch Mission control to move a program to a different space, the "Spaces" dont appear at the top of the screen. Is anyone have an answer for this?
Also, does anyone know of a 3rd party program to bring "Spaces" back? That was my #1 favorite thing of Snow Leopard, and I need to get that functionality back.
Thanks -
My Mission Control is not working. Any help?
Everytime I click in Mission control in the Dock it does nothing, it seems like is disabled.
But when I swipe down with 4 fingers my opened windows appears, except the Desktops.
Help please.
Thanks!Software Issues - Troubleshooting
Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - Mavericks
Safe Mode - About -
Despite my best efforts, I am unable to remove iTunes 11.1.4 from my PC, this being made necessary because the original installation had a flaw and did not load properly. Effor to use the control panel, deleting dll. files, etc. all failed. And, of course, on startup, a window opens with the error and tells me find QTMovie.dll and delete it because this may be the source of the hangup. Also, in trying to delete iTunes, I get the additional message that I must get approval from the System Administrator to take this action. I am the System Administrator.
Any ideas would be welcomed.
Thank you.
James
<E-mail Edited by Host>Thank you for asking this question. I'm having the same issues.
Liz -
Apps not showing up in Mission Control
that is, when I launch such apps as ones of iWork and iLife suites simultaneously. Some of them are launching very sluggishly (as I posted this in other thread, though related to a different issue), with considerable delay or quitting, I noticed that though an active app indicator shows up, I don't see its main window etc. More recently I noticed that when iPhoto, iMovie and Garage Band are launched simultaneously (with iWork apps), then Mission control displays just iPhoto and iMovie.
I repaired all possible permissions, corrected bad font, reset SMS and PRAM. True, I have 45 GB of free disk space, 4GB of RAM. Maybe it's not enough of memory? But Activity Monitor never showed lack of it. What would you suggest?Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - Mavericks also Yosemite
Safe Mode - About -
HT4689 My desktops are not showing up in mission control
When I use mission control my desktops do not show up, however they are there (just invisible) because if I hover over where they should be and click I am taken to that desktop.
Hi Jeff,
Exactly - I do not see them under my account. I have already deleted history, cookies, etc., had my password reset 2x and tried 2 other browsers. I have all my serial numbers that I've saved at home.
The problem is that I do not see any of my products beyond 2012. I only see a few under orders. I don't see any that should be registered.
I'd attaching a couple of screenshots so you can see what I see (serial #s and personal info covered up with gray boxes). I should be able to, right? I used to be able to. This happened 2 years ago as well and finally someone fixed it. Obviously there should be a lot more listed. -
Hi,
SharePoint 2013 RSS
Viewer web part failing to complete loading when the page loads.
This happens when having RSS Viewer and then adding a Custom webpart with an updatepanel and timer control.
I had used Ajax update panel and timer control to load the web part asynchronously after the main page is fully loaded.
The RSS-Viewer web part hangs in loading state while the custom webpart loads just fine.
The issue occurs when an like button click or Timer Tick event fires after the page
is loaded.
Haven't been able to track the issue.
Couple of workaround I tried to call a server side button click event from the custom web part after the page gets fully loaded using JQuery shown below did not work out either.
$(document).ready(function () {
$('#<%= netButton2.ClientID %>').click();
And
document.onreadystatechange = function () {
if (document.readyState == "complete") {
$('#<%= netButton2.ClientID %>').click();
Please let me know how to resolve this issue.
Thanks,
FranklinHi Johan,
The assignment of this user on the given task might be corrupted. Try to remove the resource from the task, publish the project, assign the resource again and publish again the project. If it is not working, try to unpublish the task (column "publish")
and publih it again.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |
Maybe you are looking for
-
HT4623 Please Help [ASAP]
There was a purchase made in my itunes app on my iphone and it kept trying ti take the payment out when theres no money in my account. now when i try to make purchase in the games center the system is declining my card even if the payment is free.
-
Since upgrading to OS Mavericks, my iPhone 5 will not pair with my iMac. Any suggestions please?
-
IPad Not able to sync with iTunes on my Mac
I just bought a new Ipad Yesterday. When I plugged it into my computer to sync with my iTunes- It said i couldnt run it beacuse I needed 10.7 or higher. But my iTunes says its running current version, and are no updates..?? Help..
-
Printable, but NOT visible on screen - How?
Hi, We have some MS Word documents to make into PDFs. We would like to designate some of the text and graphics to be invisible on screen, but visible when printed. We need this to ensure that our users actually do print the PDFs as requ
-
Hi, Any body suggest me to create the new user without any admin acccount or here no sys account or privilage login....... i don't no the login id or password of any admin schema........(For exm sys,system etc) Thanks, Ritesh