Misspelled Artist Names Create Multiple Artists from One

What to do if Spotify has misspelled an artist's name and created two artist of one. I have seen many exemples. The Last one is Garnett Silk (right) and Garnet Silk (wrong, it shall be 2 tt). The result is that Spotify has one list with Garnett and another song list with Garnet. The songs are 80% the same and 20% unique for Garnett or Garnet. There are more such misspellings, in some cases one artist or band can become three or four. More common is that many songs are created because of misspellings of a song title. Spotify should be more professional than this. Or is it only a big computer running and making the artist presentations and album and song lists? Where can I inform Spotify about such errors? Best Regards Sanmare

I'm not sure I understand from your post what it is that you want to see. You talk about what you do NOT want to see. Do you use an ID3 tag utility to make changes to your list of artists? My personal choice is ID3-TagIt (but there are dozens of other equally capable programs out there). With it, you can modify album names ... enter single or multiple artists ... and even add the composer, song lyrics, etc. However, just having those in the ID3 tag doesn't mean they will be displayed by all software programs (players) ... that's up to the person who writes the application. So even if you do put them in, your player might not display them how you'd like them to be displayed.
I know this doesn't specifically answer your question, but maybe you can rephrase it so we know what it is you want to see on your player's screen when you have multiple artists.
-Roger

Similar Messages

Creating multiple links from one map image in Flash CS4

I have been tasked with creating multiple links from one map image using flash. Each link would go to the main website page with that location. I assume I could create a button for each location on the map but not having a lot of experience any help / tutorial you know of would be super helpful.. Thanks! Not looking for someone to work me thru it but a little guidance would be great!

If I was to answer the problem, I would be giving you what you asked not to be given... the solution. So I'll suggest that you start by researching the getURL() function. That is what AS2 uses for opening web pages.
As for coding a button, I'll recommend the following article for you... it will explain the proper approach to coding a button, which will give you an advantage over others who don't follow it, but instead use the way the article says not to.
http://www.adobe.com/devnet/flash/articles/as_bestpractices_04.html
Google is one of the best resources available for learning how to do things with Flash--it's the first place I go when I have a wondering. In general, if you type in the right keywords, you get fairly good search results. In your case, combinations of "AS2", "button", "getURL", "tutorial" would probably work well.

Creating multiple reports from one query

Hello Everyone
I are designing crystal reports where 1 query is built for 1 report / 1 sub-report. To improve overall efficiency of reports, I am trying to design multiple reports/ subreports from the same query. All the sub-reports belong to the parent report and they are very similar to each other.
For example: in Webintelligence, we can just create 1 data provider and pull multiple reports from it and display it in multiple tabs.
Can we do the same thing in Crystal reports??
Please advice.
Thanks
Edited by: Devesh Modi on Jun 9, 2010 11:19 PM

Hello,
If you are using WEBI then you have access to BOE. Create a Universe and publish it to the Repository and then you can use it as your data source.
But I think what you are asking is how to query the DB once? Not possible, each subreport will run the query each time it's viewed.
What you may want to do is create a Stored Procedure and get all of you info into one data collection and not use subreports, use grouping to emulate subreports. As an Example ....
You may want to create a case in Service Market Place since you have BOE and work with a Report Design Rep to help you work out the best solution for you.
Thank you
Don

Creating Multiple SubClips from one long "Log & Capture"?

Hi guys,
Can I create as many "Multiple Sub Clips" as I want from one long 60 miniutes "Log & Capture"?
Thanks,
Zia

YES! I always bring all my footage in as one clip.
I use that in two different ways.
One, if you are encoding a DV/DVCAM tape with the meta data: use the start/stop detect and then drag the markers to a new bin and it will automatically subclip each of your shots. Very handy, very quick.
The second way is I will assign the subclip function to a key (the / key in my case) and will use that to subclip.

How to create multiple extract from one map

Hello ,
I have a map which extract data from source and create a output text file. Now, I need to create 10 different files from the same mapping with same format but different name. So I want to generate file1.txt, file2.txt, file3.txt etc . My map currently has one target file , i donot want to create 10 target files operator in the map itself, is there a way to achive this functionality ie I want to call the same map 10 times. Do I have to do it from outside.
Thank you.
Suhail

Hi Suhail
Why not create 10 maps? These don't take up much space, only a few Kb, and you would be able to generate a unique file per map, which would be the correct approach.
If you don't want to have duplicate maps, would the data in the output files be the same or would it need to change based on some condition?
If the data is the same you can do this externally by just making x copies of the original file.
If the data needs to change you either need to have multiple maps, as mentioned at the beginning, or you would somehow need to change the source data. You cannot change the name of a mapped output file, this is because OWB maps use a hard-coded file name making it impossible to change the name of the file dynamically.
However, let's say you are able to change the source data, perhaps using a view. If you had x copies of the view script you could generate it x times, calling the map x times. Each time you would run the map it would generate file1.txt, and you would need to rename it to file2.txt before recompiling the view and rerunning the map to get another file1.txt. This would be renamed file3.txt and you could then repeat the process as many times as you like.
Does this help?
Regards
Michael

Scenario of multiple Asset from one AUC/WBS

Hello,
I am having a requirement, where I need to create multiple Asset from one WBS. I checked in the system and able to create more then 1 Asset for WBS.Also if I maintain the distrubution rules for those Asset then settle it accordingly to different Assets.
I just wanted to confirm, will it we the right way of handling this scenario? My main concern is this involves intervention of user for maintaing the settlement rule during final settlement.
Is there any other way to handle this scenario?
Thanks
Sarang

Hello Virendra,
I am not using Investment Managemnt. What do you mean by IM profile?
I understand that I need to maintain the source of cost in Source structure. But even in that scenario the user has to go and maintain settlement rules and create multiple Asset against one WBS.
So how do I tackle it, if client requirement is such that they want to create only one AUC, but during final Asset creation they want to create multiple Assets from one AUC. They dont want to have WBS for each Asset.
Thanks
Sarang

Add to Multiple Tables from One Page

Hello,
I am building an application that handles hardware inventory (APEX 4.0). I have an input page that adds data to two or more tables all at once. The page has two forms on it that point to two separate tables. However when I try to run the page, it fails and returns an error:
ORA-06550: line 1, column 437: PL/SQL: ORA-00904: "ORH_LAST_UPDATE_DATE": invalid identifier ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
     Error      Unable to process row of table IDD_ID_DATA.
So far as i can see within the App, that column is not at issue (I am not even doing anything to it and it is nullable). I have looked into the App itself as well as doing some online research but have found nothing helpful...
So my question is this: Is it possible to add to multiple tables from one page? If so how do I do it?
I am new to APEX so any help would be greatly appreciated!

UPDATE:
I received an email from the APEX Support Team:
"The simple answer is that you will need to manually code the DML (and query) processes if you wish to maintain multiple tables from one page (There is a limit of one table when using the built-in processes).
In order to do this I suggest you delete the processes generated by the wizards and create PL/SQL processes with insert, update, delete statements as necessary. Such coding is not difficult but is more time consuming than when you can use built-in processes."
I have been playing around with PL/SQL code and the end result is this:
begin
     INSERT INTO table1
     VALUES(
          :P2_Item_Field1,
          :P2_Item_Field2);
     INSERT INTO table2
     VALUES(
          :P2_Item_Field1,
          :P2_Item_Field2);
end;
I used this code in a custom PL/SQL Process in the Processing>Processes section of Page Processing and it seems to work fine now. The only downside to this method is if the name of a Page Item is changed the code will also have to be changed. Other than that i have had no problems.

Create multiple folders with one click on documents tab in BP in SAP CRM

Hi Experts,
I have a requirement to create multiple folders by clicking on a button in Documents tab in BP transaction in CRM. In standard process by clicking on create folder button we create folders. we want to create multiple folders with one single click ( i guess we can develop another button for that) folder name will be hard coded. Kindly let me know , how this can be achieved.

Hi Experts,
I have a requirement to create multiple folders by clicking on a button in Documents tab in BP transaction in CRM. In standard process by clicking on create folder button we create folders. we want to create multiple folders with one single click ( i guess we can develop another button for that) folder name will be hard coded. Kindly let me know , how this can be achieved.

Address Book - Create multiple contacts at one company?

I am using Address Book v 4.0.4 and I want to be able to create multiple contacts at one company without having to reenter the Company, Tel. and Address information each time.
Is there a way to duplicate an address, say the basic company address, to make the process of entering multiple people at one company any faster?
Any tips would be appreciated. Thanks, Michel
MBP Laptop & G5 Tower Mac OS X (10.4.9) Address Book v 4.0.4

I talked to Apple today and here is how you create multiple contacts at one address, company etc. without having to reenter everything.
1) In Address Book, highlight a contact in the name list
2) Go to the Edit Menu & COPY
3) Go back to the Edit Menu & PASTE
4) Make changes to the new 'duplicated' contact
Seems easy if you know how to do it.

How to pass column name as a   values from one page to another

hi
i have created a report(pivot) from a table
SQL> SELECT * FROM T;
C1 C2          C3 D                SEQ
A   AA           2                    1
A   AB           3                    2
A   AC           2                    3
B   AB           5                    4
B   AC           6                    5
SQL> SELECT C1
2 ,NVL(MAX(CASE WHEN C2='AA' THEN C3 END),'') AA
3 ,NVL(MAX(CASE WHEN C2='AB' THEN C3 END),'') AB
4 ,NVL(MAX(CASE WHEN C2='AC' THEN C3 END),'') AC
5 ,SUM(C3) FROM T GROUP BY C1;
C1          AA         AB         AC    SUM(C3)
A            2          3          2          7
B                       5          6         11
SQL>
my requirement in Apex is like this(reverse)
eg-
when i click on cell values '2' then,it should return
C1 C2          C3 D                SEQ
A   AA           2                    1
{quote}how to pass column name as a values from one page to another
for example i have to pass 'c2' as a value to next page{quote}for report pivot you can reffer below link
Report
Amu

thanks for your reply
i 'm doing what exactly you mention here .
my problem here is
i have 15 columns
i am executing a query based on the values of the column(column name) in the target page
1)here i am passing(all) the column values to the next page-but i want to pass only one column values(column name)
when i click on any cell of that column
OR
2)i can pass all column name to target page -there(in the target page) i can filter out
i think option 1 would good if you filter out the unwanted columns
Regards
Amul

Create multiple PDFs from multiple files

Hi everyone
I'm trying to use the "Create multiple PDFs from multiple files" function in Acrobat 9 Pro (version 9.4.6) to create about 100 PDFs from InDesign CS5 files. Theoretically this would do the trick for my purpose. BUT: When running the function, it does not use the CS5 InDesign (version 7.0.3), but tries to open the files with InDesign CS3. Of course this does not work. We, as a professional working agency, have installed CS3, CS4 and CS5. Even with making the InDesign CS3 .app invisible an pushing it into the garbage bin during the process did not work. Acrobat still wants to access InDesign CS3. It is not possible to downgrade the files to CS3 files, for there are special (i.e. interactive) functions which only work in CS5. It would be more work than creating the PDFs manually, anyways.
Does anyone have similar issues? Any ideas how to solve the problem?
Thanks in advance.
Thinka

OK, cool, I found one, which seems to work just fine.
http://www.kahrel.plus.com/indesign/batch_convert_cs3.html
found here:
http://forums.adobe.com/message/3712434#3712434
Thanks for the hint!

Moving multiple queries from one category to another in QM

Hi All,
Is there is any way of moving multiple queries from one category to another in the query manager?
Or is the only way of doing it by saving each one individually into a different category.
Any ideas ?
Regards,
Rakesh N

Hi Rakesh,
The query manager has limited function compare with normal file management applications. Under current design, you have to do this one by one. You just need to make sure move the smaller amount of queries to large category. Category name can be changed easily.
Thanks,
Gordon

Lightbox -- Multiple photos from one thumbnail?

What I want to do is create a lightbox that launches a set of multiple photos from one thumbnail. Is this possible? All I have been able to do is create a lightbox that display's all of it's contents as thumbnails on my page. I am creating a portfolio page and I want each project's images to launch from one thumbnail. All of the projects would then be able to appear on one page. The work-around of course would be to make a separate page for each project, and make a lightbox within each one of these pages. Any solutions for this? Thanks!

You can achive this by combining the Composition Lightbox Widget with the Slideshow Widget.
01. Add Lightbox Display widget from the Composition section in the Widget Library
02. For each small grey box (the Trigger) add your thumbnail
03. In the larger grey box (the Target) add your Slideshow Widget (anyone you'd like from the Widget Library)
04. Replace images with the images you want for your slideshow
05. Preview

Creating Multiple Ringtones from 1 song

Does anybody know whether or not we'll be able to make multiple ringtones from one song with out having to pay 99 cents for each one? i.e. you buy one song, +another one bites the dust+, and then you want to make 4 different ringtone from the same song, do we have to pay for each one, even though they're from the same song technically?

Hi Greg,
Many thanks for your answer. And yes this would be a solution. However I just simplified my case as the decision to create an second record and where to post is depending on more than 1 field in the source.
But I will keep it in mind, because I also can opt for a solution to store data differently in BPC fac-tabels which will help me to use script logic.
If it is not possible to create multiple records from a single records in the standard functionality in the Transformation and/or Conversion file, I have to create a custom DTSX or change my way of storing data.
Anyone else who is having an alternative idea like Greg came up with?
Please let it know!
Best regards,
Johan

Howto make created folders/ files from one teacher, read only for other teachers?

Hello there,
as an admin @ school I was wondering how to make created folders/ files from one teacher, read only for other teachers?
- In a 2008domain, created a group "teachers"
- created a folder "teacher data" where all teachers have read/write permissions
ideal,a teacher who make's a folder in "teacher data" should be the only oen who is able to add file's to that folder and dele that folder or files. Other teachers may be able to read the content of the folder.
Is this possible to set up and how?
many thanks.
Nico.
rds

Hi Nico,
You could set the permissions below to resolve the issue:
For the root folder "teacher data": give the full control permission to CREATOR OWNER – "Subfolders and files only" and give the read/write permissions to the group "teachers"– "This folder only".
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

To Move Multiple Files from one directory to another.

Hi,
I need to move multiple files from one directory in UNIX (application server ) to another. I need something like an FM 'STRALAN_COPY_FILES' which is also valid in ECC 6.0.
Thanks in advance.

Hello Sachin
Below you see a copy of how to use EPS_FTP_PUT using transaction SE37.
Import parameters               Value
RFC_DESTINATION =                 NONE
LOCAL_FILE             =         filename
LOCAL_DIRECTORY   =              /dir1/dir2
REMOTE_FILE             =        filename
REMOTE_DIRECTORY   =             /dir1
OVERWRITE_MODE        =          F        " force -> overwrite existing file
TEXT_MODE                    =   B               " binary
TRANSMISSION_MONITOR            X       " display transmission monitor
*RECORDS_PER_TRANSFER            10
*REQUESTED_FILE_SIZE             0
*MONITOR_TITLE
*MONITOR_TEXT1
*MONITOR_TEXT2
*PROGRESS_TEXT
*OBJECT_NAME
Regards,
Uwe

Misspelled Artist Names Create Multiple Artists from One

Similar Messages

Maybe you are looking for