Mistake in administration guide for TC / SX Series 7.x
Hi ,
I think this mistake ..
example :
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/administration-guide/profile-c60-c40-and-codec-c60-c40-administrator-guide-tc71.pdf
appendice:
ClearPath — Packet loss resilience
ClearPath introduces advanced packet loss resilience
mechanisms that increase the experienced quality when you
use your video system in an error prone environment.
We recommend that you keep ClearPath enabled on your
video system.
Go to Advanced configuration (menu on screen) or open the
System Configuration page (web interface):
• Navigate to Conference 1 > PacketLossResilience > Mode
Choose Off to disable ClearPath and On to enable
ClearPath.
Correct is Experimental -> Conference 1-> PacketLossResilience
good day !!!
There is at least a forum dealing with documentation, so maybe its worth posting it there:
https://supportforums.cisco.com/community/4886/technical-documentation-ideas
Besides reporting it through TAC can be an option as well.
These are the current options:
xConfiguration Experimental Conference[1] PacketLossResilience ForwardErrorCorrection: <Off, XOR, XORWithUniqueSsrc, ReedSolomon>
xConfiguration Experimental Conference[1] PacketLossResilience RateAdaption: <Off, On>
xConfiguration Experimental Conference[1] ReceiverBasedDownspeeding: <Off, On>
Similar Messages
-
Where can I find the Flash Player Administration Guide for Flash Player 10.1?
The guide can be found at the following location:
Adobe Flash Player Administration Guide for Flash Player 10.1Or, for web access, you can use the Chrome web browser, that has Flash built into it. It's available from http://support.google.com/chrome/bin/answer.py?hl=en&answer=95346
-
Administration Guide for CA Wily Introscope?
Does anyone know where I can find an administration guide for CA Wily Scope 8.0?
I have already reviewed SAP Note 797147. This did not help me. Introscope is already installed and
running. I just want a guide that explains menus and common operational tasks.
Any help would be much appreciated.
Thanks!Ben
service.sap.com/diagnostics
goto 'Tools in End - to - End Root Cause Analysis' section , there you can see 'Demos' and 'User documentation' and FAQs
and the section 'Learning to use End-to-End Root Cause Analysis' -
HANA administration guide for SP06 and certification refrences
Hello ALL
I am writing my HANA SP06 (HANATECH_131SP06) on July and preparing HA 200
Please share HANA Administration Guide for SP06 link and other reference links
Thanks,
SankarHi RajiTh R s,
The training material for SAP Education courses is not available for download anywhere (legally).
Good news is that you do not need it.
Most topics that are covered by the exam are clearly explained in the SAP HANA Administration Guide.
For all the ins and outs about the exam, see my blog SAP Certified Support Associate: SAP HANA - by the SAP HANA Academy.
Success,
Denys -
Sap hana administration guide for sps07
I want sap hana administration guide for sps07. Can some one share the document if they have already downloaded it earlier ?
Hi Anju,
There is a link to older versions of HANA documentation on this page: SAP HANA Platform – SAP Help Portal Page
In the intro section, see the last line:
Note: The full documentation set for this and older support package stacks of the SAP HANA platform is available on SAP Service Marketplace .
Cheers,
Jody -
Lost Administrator password for Pavillion g series
Hello, i have forgotton the administrator password for my HP Pavillion g series notebook PC, i have the passwords for my other accounts. can you help me please?
Thankyou, RichardHi Richard,
-
Beginners guide for netweaver administration
hi ,
i m a basis administrator . next month they r going to put me in a project where xi is implemented .
gurus what are the url's which guides for the sap xi administration
i m very new to xi...so can you also please say me what would be the job role for xiadministrator ?
is that very different from basisrole ?
also if possible guide me for netweaver administration ...
thanks in advanceFirst... download and digest the PI/XI Installation guide from SAP Marketplace.
Then, you can go to the Exchange Infrastructure forum and search there as they have millions of threads like these one.
Regards
Juan -
Oracle Fusion Middleware Administrator's Guide for Oracle SOA Suite
Somebody knows where to find this document for BAM 11g TP4 ?
Oracle Fusion Middleware Administrator's Guide for Oracle SOA Suite
I need to add new users for BAM and I m not able and the User's Guide for Oracle Business Activity Monitoring tells me I should look for the login management in this doc.
TanksWeird? fmwadmin stands for Fusion MiddleWare Admin. Quite easy to remember...
--olaf -
Configuration guide for Personnel Administration Required
Can anyone send me the Configuration guide for Personnel Administration....Thanks in advance
you can go through this link for the configuration of PA.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/48/35d4ad4abf11d18a0f0000e816ae6e/frameset.htm
this should be helpful for you
if you need still more pdf documents send me your personnel email id, i can send it to you.
sam -
Local Administration rights for Xcelcius and Crystal Reports
Hello Customercare,
I am currently compiling a list of software that does and does not require local administrator rights to install and run.
I was wondering if you would be able to assist me, we currently use Crystal Reports version 8.5 and Crystal Xcelsius 4.5. I need to find out if these programs require local administrator rights on the computer they are to be used on to a) Install properly and B) run from that computer by a user without local administrative rights for that machine.
Please let me know or point me in the right direction of a resource who would be able to help me with the above information.
Many thanks for your time,
Phil Booth
GroupM
Technical Support EngineerHi Joseph,
Download [Product guide/end userdocument|https://websmp103.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000713358&_SCENARIO=01100035870000000202&] select your product.
For Business objects Integration kit for SAP click [here|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f]
Regards,
Shweta -
OBIEE 11g Refresh GUIDs for Presentation Services
Hi Friends,
I am facing problem while trying to refresh the GUIDs for the Presentation services during migration from DEV to QA
When I migrated RPD and Catalog from DEV to QA, the user weblogic was not able to login. So I modified the NQSConfig.INI file to make the below change
FMW_UPDATE_ROLE_AND_USER_REF_GUIDS = YES*
and restarted the BI Servers. Now weblogic is able to login. So far good.
But When I login using weblogic and open 'My Dashboard' I get the following error access denied for user to path /users/weblogic/_portal/dashboard layout*
Reading the Oracle Documentation I see that the refresh of GUIDs need to be done for Presentation services as well. http://download.oracle.com/docs/cd/E14571_01/bi.1111/e10543/privileges.htm#CHDHGAAH
However I am not able to find *<ps:Catalog>* in the Instanceconfig.xml file. I can only see a similar one like below
*<Catalog>*
*<UpgradeAndExit>false</UpgradeAndExit>*
*</Catalog>*
Where should I add the below? I went ahead and put it just below the above. So that my file looks like below. Is this correct?
*<Catalog>*
*<UpgradeAndExit>false</UpgradeAndExit>*
*</Catalog>*
*<ps:Catalog xmlns:ps="oracle.bi.presentation.services/config/v1.1">*
*<ps:UpgradeAndExit>false</ps:UpgradeAndExit>*
*<ps:UpdateAccountGUIDs>UpdateAndExit</ps:UpdateAccountGUIDs>*
*</ps:Catalog>*
After saving the instanceconfig.xml , I used opmnctl to stop the Pre.Ser. Stop was successful But I am not able to start the ps. Why is that? Is it a problem with my new entry in Instanceconfig.xml?
Checking the log files, clearly says its the content of instanceconfig.xml causing the issue.
----Log entry--
[Util Logger] Exception occurred:
Severity:Fatal
Type:class saw::Exception const *
File:C:\ADE\aime_bi\bifndn\analytics_web\main/project/webutil/configreaderinstance.cpp
Line:540
Message:Invalid settings in config file: Bad config instance '\\?\C:\Middleware4\instances\instance6\config\OracleBIPresentationServicesComponent\coreapplication_obips1\instanceconfig.xml'!
Any help would be highly appreciated.
--Joe
Edited by: bimetrics on Oct 28, 2011 5:06 PMHi,
i hope u r version You don't need the ps: part either
If your using obiee11.1.1.3. the instansconfig.xml file it will show like this (ps: part either ) and obiee11.1.1.5. no more that ps: part in the instanceconfig.xml file
*<UpgradeAndExit>false<UpgradeAndExit>*
*<UpdateAccountGUIDs>UpdateAndExit<UpdateAccountGUIDs>*
then
set it to *<UpdateAccountGUIDs>none</UpdateAccountGUIDs>* and then restart the services
Refer obiee11.1.1.3.0 version of guide...all r similar except ps: part.
http://varanasisaichand.blogspot.com/2011/08/refresh-user-guids-obiee-11g.html
http://gerardnico.com/wiki/dat/obiee/migration
Thanks
Deva
Edited by: Devarasu on Oct 29, 2011 9:45 AM -
Is there a user guide for Robohelp 7?
I've used Robohelp before, but now am faced with having to create a stylesheet. I've tried using the Help but it seems to make assumptions that I've done created .css before. For example, the kinds of things that I can find no information on:
What is the Design Editor? I can't seem to find it to be able to create an external style sheet.
In the "Create a style sheet" topic, you must first click style sheet, but the style sheet button isn't enabled.
Bottom line: I'm looking for all inclusive documentation that will give me concepts and procedures for creating a style sheet.
Thanks for your assistance.Thank you so much for sharing these resources with me. I have viewed
Adobe's tutorials on a number of topics and where their documentation
falls short of the mark, the tutorials are excellent. I can't wait to dig
into them.
~~~~~~~~~~~~~~~~~~~~~~~~
Mary K. Greer
Information Developer - Learning Management Solutions
Intelligent Automation Solutions Client Services
407.771.8187
lwright18 <[email protected]>
07/21/2009 01:22 PM
Please respond to
[email protected]
To
Mary Greer/CIMG/CVG@CVG
cc
Subject
Is there a user guide for Robohelp 7?
Hi..
I COMPLETELY understand your frustration, because i've just gone through
the same ordeal.
Its impossible to figure out how to import frame files into RH and how to
use style sheets from the on-line help, because as you said, you only get
bits and pieces of information out of context, and many of the
descriptions of settings don't explain what they are for/do. Its the same
old paradox; the only way you can understand the on-line help is if you
already understand the product; in which case you wouldn't need the online
help.
What finally helped me to get a basic grasp of the mysteries of style
sheets, etc. was the tutorial: "Adobe Technical Communication Suite
Getting Started series - Part 3: FrameMaker 8 and RoboHelp7: …" @
http://www.adobe.com/devnet/robohelp. (it runs about an hour and a half).
It explains how to enter and apply custom style sheet settings, mapping,
etc. and should probably clear up your confusion.
The only thing I STILL not certain about though, is what relationship, if
any, template (.htt) files have to do with anything, and whether they
relate to .css files. So i'd appreciate it if another poster can shed some
enlightenment on that. -
Where can I download an user guide for a HP laser jet printer p2055dn ?
Where can I download an user guide for a HP laser jet printer p2055dn ? [email protected]
This question was solved.
View Solution.Hi,
You may not be able to find the manual for it but this is the manual for the P2050 series:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01461642/c01461642.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
C440 Where is the user guide for the keyboard?
Where is the user guide for the keyboard?
Moderator Note; subject edited; post moved to own thread
Solved!
Go to Solution.hi cynLenovo,
Welcome to Lenovo Community Forums!
Is the keyboard the one with LVT?
This keyboard has the Media keys like anyother Media Keyboard.
You can check this thread
http://forums.lenovo.com/t5/Lenovo-3000-and-Valueline/H5-series-keyboard/m-p/1171171/highlight/true#...
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
RECOVERING FORGOTTON ADMINISTRATOR PASSWORD FOR MACBOOK PRO WITH OS MOUNTAIN LION REQUIRES (A) OPTICAL DISK READER or (B) ANOTHER COMPUTER. I HAVE NONE OF THE TWO. I HAVE BEEN ABLE TO LOGIN TO APPLE SUPPORT AND COMMUNITIES. NO SOLUTION IS AVAILABLE
Terribly sorry Joseph Kriz. I had absolutley no intention of annoying anyone. This was the first time I have been communicating in a discussion group, and as I wrote my comments I had no idea how my typing would reflect and where my question would be going. Hope my unintentional typing will be forgiven and causes no further agitation.The only additional comment I can make on your response is that "I do not use capital letters or CAPS LOCK while I try to enter my administrator password". Thank you for guiding me
Maybe you are looking for
-
[b]Java Stored Procedure generating ora-932 in Oracle 9i [/b]
Hi , I have written a Java Stored procedure. And I have written a wrapper function as bellow FUNCTION "GENERATE_AC_EXCEL_REPORT_FN" ( refCursorCall VARCHAR2, fromDate Date, ToDate Date, nsn VARCHAR2, period varchar2, site VARCHAR2, vendor VARCHAR2, s
-
How do I edit/delete the same section of multiple tracks?
Basically I'm doing a podcast with multiple voice tracks. Once I sync and line everything up, I still have sections of audio I want to take out. But obviously with the tracks synced, I need to delete it from all of them at once and have the audio "sn
-
HT204074 I'm not seeing the manage devices option under my account information.
I only have the Apple ID summary, iTunes in the Cloud, Purchase History, Settings...what am I missing??? I am trying to remove an iPad from my account. Thanks!
-
Some of the application components are missing from the Application directory, Please reinstall the application.
-
Solaris CDE raises Fonts on JComponents
Hi, I have an application written in swing. No matter what look and feel i use, when i run it on Solaris with CDE, all compents with text get "stretched" to be tall enough to hold two lines of text, even though there is only one line. so check boxes