Mistake in the description of equipment

В описании Рабочая станция HP ProLiant WS460c Gen8 E5-2637 2 проц. 32GB-Р, в рзделе "Хранение" написано SDD малого типоразмера. Наверно это не правильно
In describing Workstation HP ProLiant WS460c Gen8 E5-2 percent in 2637. 32GB-R in rzdele "Storage" written SDD SFF. Perhaps it is not correct

Hi @WaleraPP ,
I have translated your post in English for everyone to easily help you.
Best,
Russ
I worked for HP.

Similar Messages

Table for the descriptions of the custom programs.

Hello,
Can anyone please tell me the table name in which I could find the descriptions of the custom programs which we create in SAP?
Thanks and Regards,
Amit.

By mistake asked twice

Description of Equipment with serial Number

Dear Friends,
I have created a serial number profile for one of my material type which creates my sub-equipments directly at the time of material posting. Now, the description of the equipment is by default same as that of the material but I want to add the serial number to the description of this equipment. Is there any standard way to do so?
Please do help.
Thanks in advance
Chin2

Hi,
I believe u may have to do it via user exit :- IEQM0003 Additional checks before equipment update
Additionally for having eqpts numbers same as serials nos check this link http://help.sap.com/saphelp_470/helpdata/en/1d/e4903cf6c4492ce10000000a114084/content.htm

Faultless pdf print master shows mistakes on the printer's computer

For years I have manufactured artworks in Indesign (now CS2) and link with it mainly psd image files. Exotic fonts are converted into paths. The exported pdfs are then sent as print master to to the printer's. With three different printing enterprises I never had had a problem so far.
Now I have changed the print office again, and the prints look really bad: One of the psd-linked pictures has strong hard black shadows (in the original they are quite soft and greyish) and overlays with one white corner (in the original transparent background) another picture, although it appears completely correct in my pdf, on all 5 computers, which we have in the house, in different pdf readers.
In addition 2 Logos (originally white fonts on transparent background)
were printed with a white background. On no monitor that I know (ours and friends') any mistakes in the pdfs show up, only on the printer's computer they appear: I received screenshots from the print office with the same time stamps as my pdf-masters, however with the errors, high-loaded on
the server, which appear afterwards in the pressure. I am
shocked, because the print master stops to be a master if it gets out of control. What can I do? Thanks for advice.

The problems you are describing sound like improper handling of transparency and overprinting at the printer, either because he doesn't understand how to deal with it correctly or his equipment is out of date. I'd look for a different printer.
Peter

Clicking on the "i" button at the end of the description of individual podcasts crashes iTunes every time.

I recently updated to version 10.5.1.42, after being seriously out of date ( I'm pretty sure I was running 9.0.1). The new version runs OK except for crashing every time I click on the little "i" button where the description of individual podcasts gets truncated. I get the "iTunes has encountered a problem and needs to close message" and the option to send an error message to Uncle Bill Gates - like he actually cares about compatibility issues with an Apple product!!
The "i" button isn't the single most important feature of iTunes, but it is sometimes useful and I'm wondering if anyone else has encountered and fixed this. I'm running XP, service pack 3 and hoping to hang on to it for a while. Yeah, I'm old and resistant to change, but I realize that you have to give in and update eventually or your stuff stops working. So I'm hoping that this isn't about XP, but if it is, I guess I'll just have to live without the "i" feature.
Something that might possibly be relevant to this issue: I did go in and roll back to my previous video driver after, I'm told, the iTunes update installed its own and screwed with all my other settings elsewhere in my system: made my desktop icons much bigger, changed the font in my Gmail account, etc. This happened last time I updated iTunes a couple of years back and was the reason I resisted updating since then. This is also the reason I have not tried uninstalling and reinstalling. Thought I'd try this post first and see if anyone had an answer.
Thanks

montanatroutbum wrote:
The new version runs OK except for crashing every time I click on the little "i" button where the description of individual podcasts gets truncated. I get the "iTunes has encountered a problem and needs to close message"
Simple solution... don't do that.
Check for Windows Updates, most likely the system is missing one or several.

In transaction OBA7 the description is not coming in Spanish

Hi Everybody,
Spanish ( ES ) language imported in ECC 6 thru SMLT and activated the same thru report RSCPINST.
After that login in Spanish is working fine.
But problem is in transaction OBA7 the description is not coming in Spanish.
Problem reported only for this tcode only , may be there are problem in other tcode also.
Any idea !!
Regards
Santanu

Hi,
check in client 000, if you don't have spanisch there, then most probably its not translated (yet)
you can transate yourself if needed...
Rgds
Nico

Iphone 4s wont sync when I connect it to the pc( not apple). It is connected as it comes up on itunes but when I try to sync it with apps/ music etc it wont. I am doing something wrong or is it a mistake with the phone.

My iphone 4s wont sync when I connect it to the pc( not apple). It is connected as it comes up on itunes but when I try to sync it with apps/ music etc it wont. I am doing something wrong or is it a mistake with the phone. I am still able to download apps and music from itunes on my phone though.
I already restored it but that didn't help.
TIA for any replies.

iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup?

I can't seem to get the iTS to update the description of my podcast, nor refresh to show new episodes?

I recently launched a podcast series (http://itunes.apple.com/ca/podcast/notes-from-northwest-passage/id449063851) but its still showing an older description text with some typos and an incorrect link in it, as I registered it with a pre-edited file so it would be in line for review while I finalized the details, and now I can't seem to get it to refresh and show the new texts at all, even though I edited the description texts in the xml file well over 2-3 weeks ago.
I've tried redoing this file several times. It always validates but changes never get picked up by the iTunes store.I can manually subscribe to the feed using iTunes' advanced menu, with no problems. The feed is at:
http://a4.g.akamai.net/7/4/66750/v1/smb2.download.akamai.com/66750/http/podcasts /archaeology2011/arcticarchaeology2011_eng.xml
I recently (about 3-4 days ago) tried redirecting the feed to a new version of the xml file stored in a new folder, just to see if that would somehow jolt it back into reading it, but again after 3-4 days it hasn't done anything.
It's also not showing any of the most recent episodes even though they have all been there about a week, so the store should have picked them up by now, no?
Any suggestions?

If you look at the feed, and look at the entry 'The end to an exciting field season in Aulavik National Park' you will see the line:
<pubDateFri, 29 Jul 2011 04:00:00 GMT</pubDate>
You have not closed the 'pubdate' tag - there should be a '>' as the 9th character. Because the tag has been left open, it invalidates everything which follows it, and thus the entire feed. iTunes therefore cannot read it, which is why the Store has not updated. Add the '>' and republish, and all should be well.
It's always worth checking your feed by subscribing manually, from the 'Advanced' menu, or by clicking the 'subscribe free' button on the Store page (both do the same thing) - if you can subscribe to the feed it should be OK.

Iview: Push button for switching on or off the description of the document

Hi all,
In the AdminExplorer iview, I want to have a button to display the description of the document, as it happends in the following page.
https://www.sdn.sap.com/irj/sdn/downloads
I've added the follwoing rnd:command(command=NEWCOMMAD/style=icon)
in List Renderer's Dispayed properties field, BUT
a)I dont know how to create that NEWCOMMAND,
b)I dont know if this the correct way of doing it.

Quick answer—No.

The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

Hi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the
installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException: Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String temporaryDirectory)
the message resource is present but the message is not found in the string/message table
Thanks
Suresh
Suresh

Hi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0
from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException:
Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String
temporaryDirectory)
the message resource is present but the message is not found in the string/message table
We are using VS 2013 (premium) and IE 10.0, scripts have been created on the same versions. It is working fine on
developers command prompt but the same tests are getting failed in lab center test agent machine
test agent log:
QTAgentService.exe, AgentService: calling AgentObject.RunEndFileCopyComplete
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: waiting for agents to start.
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'Cleanup' on the test agent
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'StopDataCollection(int)' on the data collection agent
QTAgentService.exe, AgentProcessManager.IsDataCollectionAgentNeeded: IsExecutedOutOfProc? True
QTAgentService.exe, AgentPro
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentService: Connection to controller is up.
Thanks
Suresh

I have applied a description to photos in iPhoto. When I burn the CD, the description is not included. I used to do this with an older version of iPhoto. Am I doing something wrong?

I have been organizing my photos in iPhoto and have written descriptions for them. In the past, with an older version of iPhoto, I would burn a CD. When I would put the CD back in my computer, the description would also be on the CD. Now, I am burning the CD's and there is no record of the description. This is very important as I want the information stored with the photos, both for my own reference, but also if something would happen to me my family would know who are in the photos and what the occasions were. Is there some way I can do this? Any help would be much appreciated. Thanks!

Ok, sorry! I created an album with the photos I wanted to burn. I gave them new titles, sometimes using batch change when appropriate, otherwise individually. I then clicked on info and in the area labeled description I gave each photo a brief description. When I was done, I went to Share and clicked on burn. When prompted I inserted a blank CD-R in my external CD/DVD burner (which I need to use as my internal one has been replaced twice in less than a year and I was sick of spending $150.00 each time). When it was loaded I clicked the burn button at the bottom of iPhoto. When it was completed I reinserted it into the external CD/DVD burner/reader to see if it was successful. The photos all came up with the new title in my iPhoto library. When I click on info button, there is no description. The information about the date and place where the photo was taken is there, just not the description that I personally included.
I have not tried exporting the photos to finder and then burning as they suggest doing if you want the CD to be readable on Windows program, but I never had to do that with my old iPhoto program, so did not know if that would make a difference.
I can't think of any other information you might need, but if I missed something let me know and I will try to include it. Thanks for your interest in helping!

How can I update the description of my book that is for sale on the iBookstore?

I have tried to update it through iTunes Producer, in the "Look up Metadata" and the "Open Package" modules. The new epubs that I upload appear to get published immediately, but the description is never updated in the iBookstore. I have emailed Apple three times about this in the past two weeks but haven't gotten any response.

I guess I misunderstood the reason for the decrease of your sellings.
I thought you made an update and THAN you got the problem.
But in fact it seems the problem is due to NOT having success with the update.
however, perhaps I can contribute what I got from a friendly person at itunes support:
"With regard to changes that can be made, once a title has been delivered to the iBookstore, the only changes that can be made through iTunes Connect are updates to pricing, territory rights, Cleared For Sale/Not Cleared For Sale, and DRM settings.
For all other changes (e.g. correcting author name or book title), please make a metadata change request through the Contact Us form in iTunes Connect under the topic "Metadata, File Formats, and Subject Categories."
Actually that is not the whole story, particuly regarding using producer. It seems to me that I did read somewhere that there is a kind of maximum for updates per quarter of year. I mean updates that are NIT regarded as new versions of a book. I somebody could write an ibook about all this matters, easy to understand and complete, with an index, would be great. i would buy first.

How to change the description of a program or report

Hi,
I had copy a report of and changed thereby the name.
But the description is still the same and I can't find
a way to change this.
The problem with the description is that it appears
as program-title in selection-screen-->select-options.
Thanks for help

Hi
change the attributes or
In the REPORT along with name
declare NO STANDARD PAGE HEADING
it will not display the report description in the output.
Reward points for useful Answers
Regards
Anji
Message was edited by:
Anji Reddy Vangala

HT204266 Hi... I bought an app from app store... It turned around to be a false app and not as per the description. App dev page is a fraud. How can I get a refund?

Hi... I bought an app from app store... It turned around to be a false app and not as per the description. App dev page is a fraud. How can I get a refund?

Welcome to the Apple community.
Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History.

Is there a way to have the description field in a calendar list item to support enhanced rich text?

We have a user who has a few hundred calendar items created in outlook. If you open the calendar item, the description includes tables with borders, shading, etc. It seems that the description field in Sharepoint calendars only support basic rich text,
so if I copy the items from the user's calendar to the sharepoint calendar, the formatting is lost. Is there any way to create a custom calendar with enhanced rich text for the description field?

This is a workaround that is working for us. I created a new column "Event Description", selected "Plain Text" and then created a basic workflow that updated Description from Event Description. #160 is no longer showing.
Please be aware that the trick to this is that you must write everything in a string. In other words, don't use the Enter key.
In my case it was worth it as we couldn't rebuild and the user needed a valid and quick fix.
Cynthia Duke
Cynthia Duke

Mistake in the description of equipment

Similar Messages

Maybe you are looking for