Mix 10.5.8 Server and new 10.6 - Advice?

We currently are using a Leopard 10.5.8 Xserve with Dansguardian and Squid proxy to provide web access and limited wiki and calendar use for about 200 users (not all online at once). I would like to investigate serving podcasts daily to the users using the necessary services in Mac OS X Server. There is also a possibility of streaming broadcasts once a week. Workgroups have been setup and Podcast Producer works fine.
My question has to do with the load on the Xserve. While testing there does not seem a significant impact on the web access and server. However, going forward, am I better off to deploy the Podcast Producer, Xgrid, and QTSS on another server; perhaps a new 10.6 mini? If so, has anyone had experience integrating a 10.6 server with a 10.5? Are there any issues to be concerned about?

Similar Messages

How to copy Restore database in new server and new domain.

Hai all,
I'm trying to backup a database from one SQL server and restore it to another (both are SQL2008 R2) but diff domain.
when I try run few query, the output is empty. Please advise.
noor hafizah

Hi Noor,
Filtered views use the Principal Access Object to determine the records to be shown to the current user (the one executing the query). You will not be able to see any results if the account not defined inside CRM.
Please try to
assign the correct security role to the user account.
If you have more questions related to CRM, you can post in the Microsoft Dynamics CRM Forum . More experts there will assist you.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Big Project: Upgrade to Snow Leopard Server and new drive

Hi guys, with my early 09 Mac Pro (with maxed RAM) I need some advice. I am a guy who sticks with things for a long time, cautious about change, and likes consistency.
So, I have a copy of Snow Leopard SERVER I want to install from scratch. I also have 4 WD 1tb black caviar drives I want install -- replacing the current startup 640 gb drive. How would I best accomplish the backup of my current data on this smaller drive and then restore it onto the new 1tb drive?
I give you the following objectives I have for the use of these 1tb drives on the system and would appreciate any other advice you might have to offer.
1) I envision using two of the drives as primary, and the other two as backups using TimeMachine.
2) I would like to have the following partitions on the startup drive (#1).
a)one boot partition for installation of Server OS and Application programs.
b)one boot partition for future Mac OS installations.
c)one data partition to house the /Users filesystem - 4 named users in household who share two macbooks.
d)one or more partitions for separate deployments of Guest OSes for XP, Window 7, etc. using Parallels.
3) As far as partition sizes, I am thinking 50 Gb for each of the MacOS bootables and apps, 100 Gb for the Guest OSes. Leaving about 500 or 600 Gb for /Users, including an iTunes library, and the wife's scrapbooking.
4)Ok, drive #2. I want this drive dedicated to demanding storage needs of video.
5)Drive #3. TimeMachine Backup for Drive #1.
6)Drive #4. TimeMachine Backup for Drive #2.
Thoughts? I appreciate your questions and critique on my outline here.
Thanks much!

Off load /users to another hard drive
don't use internal drives for TimeMachine, especially both. Safer to be external. And if internal, use extra drive sleds.
Depending on what you use it for, the 640 might be fine. Maybe use it as a bootable clone though.

Help With MAC Mini Server and New SSD

Hey Guys,
I just got a Mac Mini Server. I swapped out one HD for a new SSD. A Crucial One.
I am booting in recovery mode and it only sees one HD and says it is 1.5 TB, (1 tb regular and the new SSD is 512)
I just want to run osx on the SDD .. help

I'm unsure of the proper procedure as I'm not experienced dealing with Fusion Drive setups. If Disk Utility shows you have a 1.5 TB drive, then what do you see when you boot the computer and check disk drive space using Get Info? I know you can revert the volume you have back to standard format if you don't mind using the Terminal in your Utilities folder:
Open the Terminal and paste or enter the following at the prompt:
diskutil list
Press RETURN. This will list for you the device information for your HDD. Here is an example of the output:
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *120.0 GB   disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                  Apple_HFS Yosemite                119.2 GB   disk1s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
You want what you see at the top left - /dev/diskn, where n is the integer number. Then enter or paste at the prompt:
sudo diskutil cs revert /dev/diskn ; replace the n with the integer number found above.
Press RETURN and enter your admin password when prompted. It will not echo to the screen, so be careful typing. Press RETURN again. Wait until it completes the process which is when the prompt returns.
Given the potential danger when using the Terminal in this way, please be sure you have first made a reliable backup. Better safe than sorry.

Move appset to new server and new version

Hi
I am currently on 5.1, SQL 2005 and Windows 2003, where we have some performance issues. To see the effekt of an upgrade I would like to move my current appset to a new server with BPC 7.5 SQL 2008 and Windows 2008.
How should I do this?
Can I make a clean installaion of BPC 7.5 on SQL 2008 and then restore the 5.1 version appset into 7.5.
What is the recommended way to do this.

Hi,
There is nothing to worry.
You need to take the backup from the 5.1 system and restore it in 7.5 MS. After the restoration, please make sure that all the components are working fine or not. You might have to look at the security once again and the reports and the input schedules. There might be small small alterations / modifications required. However, there wont be any big development. There is only one area which needs little more concentration - SSIS packages. You might have to re-build the SSIS packages in SQL 2008. Another thing is that if you have any macros or VB in your templates, you might have to revisit them.
As a whole, I dont see much challenge in this whole process.
Hope this helps.

Compatibility questions re: OS X Server and new ATA serial HD

The good news: We just got a 500 GB ATA serial HD with some end of year money just as we were running out of space on our 250 GB drive.
The bad news: We have an Xserve G5 running OS X Server 10.3.7 and the hard drive says we need to be running OS X Server 10.4.7 or later.
I checked the Apple Store to see if they had any ATA drives compatible with our version of the OS X software but the only 500 GB serial ATA I found was no longer available. Looking at the 750 GB ATA I can't find any specs as to software compatibility.
Suggestions? I really don't want to spend $1000 to upgrade to OS X 10.4 right now.
Thanks in advance for the input.
Xserve G5, OS X Server 10.3.7 Mac OS X (10.3.7)

Hi PrintTech-
I think the hardware will be fine. You may want to search this forum as I seem to remember this question coming up before and it turned out that all was well.
Assuming that this is an Apple-branded drive in an Apple sled hardware-wise you should be fine.
Luck-
-DaddyPaycheck

Server 2012 Print Server and DNS CNAME - setspn advice

Hi,
I am building a new Server 2012 Print server. What I would like to do is utilise a DNS CNAME when I deploy the printer, rather than its host name.
I have used 'setspn' to accomplish this, running the following command:
setspn -A HOST/<ALIAS> <hostname>
Now when I browse the alias I can see the installed printer. The problem I have is when I then deploy this via Group Policy it uses the servers host name instead, but it does work. If I manually edit
the GPO to reflect the alias name instead it does not deploy the printer. Moreover the indication on the 2012 server has gone so it does not see that it has any printers deployed.
When I browse the computers host name and try to manually install the printer it will state that it is downloading the drivers but never seems to complete. If I browse it's alias and try the same
thing I receive an error stating that it couldn't connect to the printer. The client machine in this instance is Windows 7 SP1 x64.
What am I doing wrong? Any help would be greatly appreciated.
Howard

I've been struggling with the same problem, for a Windows 2012 R2 print server.
I've added SPN entries and registry tweaks (OptionalHostnames, DisableStrictNameChecking, DnsOnWire etc.), but still couldn't connect printers using the alias, even though I could browse shares on the server, using the alias.
While not explicitly covering 2012 R2, this KB article helped me:
KB2546625.
Adding the alias to the local hosts file solved it for me.
Now, I wanted to be sure that I wasn't applying a bunch of unnecessary tweaks, so I went ahead and removed all registry tweaks (including DnsOnWire mentioned in the KB article), the SPN entry for the alias and rebooted - it still works!
In my case, maybe on Windows Server 2012 R2 in general, all that was needed was to add the alias in the local hosts file.

New MBP and New to Mac Advice

Hi All...just bought our first ever mac (always used pcs). Is there anything I should do/update before using it the first time? thanks.

Welcome to Mac's
It's worth checking Software Update (in System Preferences) to make sure you have the latest OS and software versions installed, there's also an SMC and Firmware update for MacBook Pro's that won't show up in there. They may say you don't need to apply them, but best to check. SMC Update and Firmware Update

Newie Mail server and running other services

We have a small office network of 6 macs that connect to a Panther server, this server provides DNS and file sharing and thats about it a Filemaker Sever and Retrospect Server. I doesn't suffer from heavy use
I have been using a a separate mac to run Quickmail server 1 (os9) and I need to upgrade it as some of the mail protocols are out of date.
We have a static IP address assigned to our mail gateway by our service provider.
My question or advice
Should I just start using OS X server to run mail services
or
Upgrade Quickmail and continue running it separately on a new mac mini (or similar)
My concerns are at the moment any problem with email locally can be solved pretty much without effecting the other server or the network.
Thanks

The basic setup is prety simple...
Replace following with your own equivalents...
Domain name: woopee.com (the domain name after the "@" in your emails)
Host name: mail.woopee.com (the hostname your MX record points to. Does not need to match server hostname. This will be the hostname mail server uses when communicating with other servers)
Local Host Aliases: woopee.com (a list of the domains you want to accept mail for. Probably just same as Domain name?)
Local network: 192.168.10.0/24 (LAN IP range for local users. Used to bypass authentication when they send mail out)
Server Admin-> Mail-> General...
Tick:Enable POP
Tick:Enable IMAP
Tick:Enable SMTP, Allow incoming mail, Enter Domain name & Host name (from above).
Mail-> Relay
Tick: Accept SMTP relays... Enter localhost IP: 127.0.0.1/32 and Local network (from above).
Tick: Use these junk mail rejection servers. Add: zen.spamhaus.org
Mail->Filters
Tick: scan for junk mail. Minimum score: 5 (can be reduced later)
Junk mail should be: Delivered (will just tag and forward to recipient)
Tick: Attach subject tag: * Junkmail *
Tick: Scan email for viruses
Infected messages should be: Deleted
Tick: update junk mail & virus database: 1 time per day
Mail->Advanced->Security
SMTP: none (this prevents smtp authentication from anyone outside your Local network)
IMAP: Tick: Clear, Plain, Cram-md5 (or leave all unticked if only using pop accounts)
POP: Tick: APOP
Mail->Advanced->Hosting
Local Host Aliases: Add: localhost & woopee.com (separate entries, see Local host aliases, above)
That's it (I think ...although I cannot guarantee I have not missed something). There will be no problem setting this up and seeing it going whilst still using the existing mail server. Set up client accounts to send and receive from new server and you can send mail around internally to test. Last thing would be to change your firewall port-forwarding for SMTP from existing server to new one.
Watch the mail.log in Console for any errors & do plenty tests.
Ensure users have mail enabled in Workgroup Manager.
There are plenty mods available beyond this. Have a good read through the mail services manual (I know its a bit confusing at times) and you should see where the above settings fit in.
Lots of stuff on the forum here which you can search for. Spam filtering in particular can be made far more effective but requires editing of the underlying unix configuration files - again, plenty of previous discussions about that on forum. Meantime, the zen.spamhaus.org RBL will filter out a great many spammers.
-david

Scale out sharepoint server search to index server and Microsoft SharePoint Foundation Web Application to new server

Hi
in my single server these below service are running:
SharePoint Server Search
User Profile Service
Microsoft SharePoint Foundation Web Application
here how i scale out Microsoft SharePoint Foundation Web Application to another server
and SharePoint Server Search to new index server.
adil

Check here to see how to add servers to the farm:
http://technet.microsoft.com/en-us/library/cc261752(v=office.15).aspx
What Inderjeet meant was that if you chose to install SharePoint as a single server instead of a complete farm, you won't be able to add servers to the farm at a later time. You can check if this is the case by checking the registry key he mentioned. If
that is indeed the case, there's nothing to it but reinstall the farm.
So that is why you never should choose the single server option, it locks you in and limits future options, while choosing to install sharepoint as a complete farm it's still perfectly acceptable to host it on a single server.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

New server and/or CA certificate for connection from custom authentication

We are running Access Manager version 72005Q4 in the Sun ONE Web Server 6.1SP5 B06/23/2005 container with java build 1.5.0_07-b03. I run a custom authentication module which checks sessions against our university single sign on system which is CAS (from Yale/Jasig). The checks are essentially https calls. All this has been working well for us for the last couple of years.
I would like to migrate the certificate used on the university CAS system from a Verisign certificate to a wildcard certificate issued by the IPS CA in spain -- these are in most browsers but are not in the standard batch of cacerts CA's -- and are free for .edu domains.
My other java based authentication plugins (Blackboard, custom apps etc) have worked fine once I import the certificate into the cacerts for the java container, but I'm missing something (obvious probably) about importing this certificate so that my amserver custom authentication module can connect to the CAS server once the CAS server is using the new certificate.
Could anyone provide guidance on where I need to import this server certificate (or preferably the IPS CA) in order to allow the custom authentication module to work properly? I assume this same problem has been solved by people wishing to connect from the amserver to services with self signed certificates. For some reason I'm finding the debugging unexpectedly difficult, I'll outline some of those details below.
Relevant things I've tried so far:
Import both the server cert and the IPS CA into the cacerts of the java container identified in the web server server.xml /usr/jdk/entsys-j2se.
Import the IPS CA into the web server cert8 style db via the web admin server.
The debugging has surprised me a bit, as I'm not getting an error that is explicitly SSL related error. It almost seems like the URLConnection object ends up using a HttpURLConnection rather than an HttpsURLConnection and never gives me a cert error, rather a connection refused since there is no non SSL service running on CAS. The same code pointed to the server running the verisign cert works as expected.
Part of the stack:
[28/Mar/2008:17:21:54] warning (25335): CORE3283: stderr: java.net.ConnectException: Connection refused
[28/Mar/2008:17:21:54] warning (25335): CORE3283: stderr: at java.net.PlainSocketImpl.socketConnect(Native Method)
[28/Mar/2008:17:21:54] warning (25335): CORE3283: stderr: at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
[28/Mar/2008:17:21:54] warning (25335): CORE3283: stderr: at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
[28/Mar/2008:17:21:54] warning (25335): CORE3283: stderr: at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
[28/Mar/2008:17:21:54] warning (25335): CORE3283: stderr: at java.net.Socket.connect(Socket.java:516)
[28/Mar/2008:17:21:54] warning (25335): CORE3283: stderr: at java.net.Socket.connect(Socket.java:466)
[28/Mar/2008:17:21:54] warning (25335): CORE3283: stderr: at sun.net.NetworkClient.doConnect(NetworkClient.java:157)
[28/Mar/2008:17:21:54] warning (25335): CORE3283: stderr: at sun.net.www.http.HttpClient.openServer(HttpClient.java:365)
[28/Mar/2008:17:21:54] warning (25335): CORE3283: stderr: at sun.net.www.http.HttpClient.openServer(HttpClient.java:477)
[28/Mar/2008:17:21:54] warning (25335): CORE3283: stderr: at sun.net.www.http.HttpClient.<init>(HttpClient.java:214)
[28/Mar/2008:17:21:54] warning (25335): CORE3283: stderr: at sun.net.www.http.HttpClient.New(HttpClient.java:287)
[28/Mar/2008:17:21:54] warning (25335): CORE3283: stderr: at sun.net.www.http.HttpClient.New(HttpClient.java:311)
[28/Mar/2008:17:21:54] warning (25335): CORE3283: stderr: at sun.net.www.protocol.http.HttpURLConnection.setNewClient(HttpURLConnection.java:489)
[28/Mar/2008:17:21:54] warning (25335): CORE3283: stderr: at sun.net.www.protocol.http.HttpURLConnection.setNewClient(HttpURLConnection.java:477)
[28/Mar/2008:17:21:54] warning (25335): CORE3283: stderr: at sun.net.www.protocol.http.HttpURLConnection.writeRequests(HttpURLConnection.java:422)
[28/Mar/2008:17:21:54] warning (25335): CORE3283: stderr: at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:937)
[28/Mar/2008:17:21:54] warning (25335): CORE3283: stderr: at edu.yale.its.tp.cas.util.SecureURL.retrieve(Unknown Source)
[28/Mar/2008:17:21:54] warning (25335): CORE3283: stderr: at edu.yale.its.tp.cas.client.ServiceTicketValidator.validate(Unknown Source)
[28/Mar/2008:17:21:54] warning (25335): CORE3283: stderr: at edu.fsu.ucs.authentication.providers.CASAMLoginModule.process(CASAMLoginModule.java:86)
[28/Mar/2008:17:21:54] warning (25335): CORE3283: stderr: at com.sun.identity.authentication.spi.AMLoginModule.wrapProcess(AMLoginModule.java:729)
The relevent bit of code from the SecureURL.retrieve looks as follows:
URL u = new URL(url);
if (!u.getProtocol().equals("https"))
throw new IOException("only 'https' URLs are valid for this method");
URLConnection uc = u.openConnection();
uc.setRequestProperty("Connection", "close");
r = new BufferedReader(new InputStreamReader(uc.getInputStream()));
String line;
StringBuffer buf = new StringBuffer();
while ((line = r.readLine()) != null)
buf.append(line + "\n");
return buf.toString();
} finally { ...
The fact that this same code in other authentication modules running outside the amserver (in other web containers as well, tomcat and resin for example) running java 1.5 works fine with the new CA, as well as with self signed certs that I've imported into the appropriate cacerts file leads me to believe that I'm either importing the certificate into the wrong store, or that there is some additional step needed for the amserver in the Sun Web container.
Thank you very much for any insights and help,
Ethan

I thought since this has had a fair number of views I would give an update.
I have been able to confirm that the custom authentication module is using the cert8 db defined in the AMConfig property com.iplanet.am.admin.cli.certdb.dir as documented. I do seem to have a problem using the certificate to make outgoing connections, even though the certificate verifies correctly for use as a server certificate. This is likely a question for a different forum, but just to show what I'm looking at:
root@jbc1 providers#/usr/sfw/bin/certutil -V -n "FSU Wildcard Certificate" -d /opt/SUNWwbsvr/alias -P https-jbc1.ucs.fsu.edu-jbc1- -u V
certutil: certificate is valid
root@jbc1 providers#/usr/sfw/bin/certutil -V -n "FSU Wildcard Certificate" -d /opt/SUNWwbsvr/alias -P https-jbc1.ucs.fsu.edu-jbc1- -u C
certutil: certificate is invalid: Certificate type not approved for application.
root@jbc1 providers#/usr/sfw/bin/certutil -M -n "FSU Wildcard Certificate" -d /opt/SUNWwbsvr/alias -P https-jbc1.ucs.fsu.edu-jbc1- -t uP,uP,uP
root@jbc1 providers#/usr/sfw/bin/certutil -V -l -n "FSU Wildcard Certificate" -d /opt/SUNWwbsvr/alias -P https-jbc1.ucs.fsu.edu-jbc1- -u C
FSU Wildcard Certificate : Certificate type not approved for application.
So it could be that I don't understand how to use the certutiil to get the permissions I want, or it could be that using the same certificate for both server and client functions is not supported -- though you can see why this would be a common case with wildcard certificates.
BTW for those interested, it did seem to be the case that when the certificate failure occurred that the attempt was then made by the URLConnection to bind to port 80 in cleartext even though the URL was clearly https. I'm sure this was just an attempt to help out misformed URL, but it seemed that the URLConnection implementation in the amserver would swapped traffic over cleartext if that port had been open on the server I was making the https connection to; that seems dangerous to me, I would not have wanted it to quietly work that way exposing sensitive information to the network.
This was why I was getting back a connection refused instead of a certificate exception. The URLConnection implementation used by the amserver is defined by java.protocol.handler.pkgs=com.iplanet.services.comm argument passwd to the JVM, and I imagine this is done because the amserver pre-dates the inclusion of the sun.net.www.protocol handlers, but I don't know, there maybe reasons why the amserver wants it own handler. I only noticed that this is what was going on when I as casting the httpsURLConnection objects to other types trying to diagnose the certificate problem. I would be interested in hearing if anyone knows if there is a reason not to use sun.net.www.protocol with the amserver.
After switching to the sun.net.www.protocol handler I was able to get my certificate errors rather than the "Connection Refused" which is what lead me to the above questions about certutil.

I am running 10.6.6 on my mac and 10.5.8 on my server and I can not add new people to Ical on my mac but if another user on a 10.5 version of mac can. What is the issue?

I am running 10.6.6 on my mac and 10.5.8 on my server and I can not add new people to Ical on my mac but if another user on a 10.5 version of mac can. What is the issue?

Set up iCloud
Set up iCloud (2)

To create a new file in application server and transfer data to ti

i am doing the following where i have to create a new file in application server and transfer data to tht file from an internal table.but its saying file cant be opened.the path i am giving to parameter p_prefil is /tmp/prachi.txt.
wats the prob..can anyone help.
DATA:L_WA_FINAL TYPE TY_FINAL,
l_wa_string type string.
OPEN DATASET P_PREFIL FOR OUTPUT IN text mode encoding default.
if sy-subrc <> 0.
write: ' file cannot be opened'.
stop.
endif.
LOOP AT P_I_FINAL INTO L_WA_FINAL.
move l_wa_final to l_wa_string.
TRANSFER l_wa_string TO P_PREFIL.
if sy-subrc <> 0.
write: 'file can not be written'.
stop.
endif.
clear l_wa_final.
ENDLOOP.
CLOSE DATASET P_PREFIL.
if sy-subrc <> 0.
write: ' file cannot be closed'.
stop.
endif.

DATA:L_WA_FINAL TYPE TY_FINAL,
l_wa_string type string.
OPEN DATASET P_PREFIL FOR OUTPUT IN text mode encoding default.
if sy-subrc ne 0.
write: ' file cannot be opened'.
stop.
endif.
LOOP AT P_I_FINAL INTO L_WA_FINAL.
move l_wa_final to l_wa_string.
TRANSFER l_wa_string TO P_PREFIL.
write: 'file can not be written'.
clear l_wa_final.
ENDLOOP.
CLOSE DATASET P_PREFIL.
if sy-subrc ne 0.
write: ' file cannot be closed'.
stop.
endif.

Steps to upgrade and move server and home folders to new box

Hi All,
Can anyone outline the steps I should take to move my 1200 users from a G4 PowerMac Server 10.4.11 to an Intel Mac 10.5.6 and move home folders to a new drive on the new box? Can it be as simple as using the migration tool and connecting up the firewire cable? And what about the fact that the IP will need to be the same?
Many thanks for any hints,
...Tom

Unfortunately, it is not as simple as using the Migration Assistant.
Please refer to the following guide from Apple:
http://images.apple.com/server/macosx/docs/Upgradingand_Migrating_v10.5_2ndEd.pdf
You are migrating from 10.4 to 10.5, so read that section carefully. There are still quirks in the 2nd edition of this guide, where it tells you to do extra stuff, but it won't hurt.
If you have another IP address available, use that in combination with a temporary hostname until everything is setup. Afterwards, turn down the old server and use the changeip command on the new server.
Schedule your migration to a long window of opportunity when the least amount of people are going to need it - like Friday evening (then take Monday off).

When opening a pdf document in Adobe Reader the font of the original document is changed....It becomes a mix of the original font and a new different font. How can i fix this

When opening a pdf document in Adobe Reader the font of the original document is changed....It becomes a mix of the original font and a new different font. How can i fix this

This issue occurs with most of the PDFs that I open up. I am using the latest version of adobe reader on my windows based machine and it is a general PDF. I saw a similar post online stating that if you look at the fonts used in the document and it doesn't say (Embedded) next to it, then Adobe Reader will try to pull the font(s) from your computer and if it doesn't find that font then it will replace it which makes it look funny.

Mix 10.5.8 Server and new 10.6 - Advice?

Similar Messages

Maybe you are looking for