Mix ECCS and FI data in Report Painter
Is it possible to mix data from ECCS and FI modules in one report, using Report Painter?
Thanks,
Nuno Barros
In the change report screen in GRR2 go to menu
Formating--> report layout
There in the rows tab select the radio button, Print Zero rows
and in the columns tab select Print Zero columns radio button,
hope this should solve the problem
Thanks
Naveen
Similar Messages
-
Wbs plan data in report painter report
Hi Gurus,
Can we have wbs plan data in report painter report....
Can we use faglflext table for this???
Thank youHi,
FAGLFLEXT table for GL totals, for controling generally we use CCSS table and for PS may be you can use RPPS table not sure -
How to make smartform get data from report painter???
hi all!
please tell me how to get data from report painter?
i has a report painter zabc ( create through t-code ke31).
I want get data from Zabc after run and show data by smartform.
plz help me!
thanksHi ,
Please check this link [SMARTFORM|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf]
Regards,
Smart -
Mixing ECC and NECC (Non-ECC) RAM Modules
Hi,
I have a G5 Dual Core 2.0 with a pair of 512Mb Non-ECC (NECC) RAM installed and I want to upgrade to 3Gb. I'm thinking of getting 2Gb ECC modules and discarding the 1Mb NECC installed. But I came across a phrase in the Apple Manual of my G5 that states "DO NOT MIX ECC and NON-ECC Memory Modules WITHIN A PAIR." Does that mean I can mix ECC and NECC within Memory Banks and NOT within a PAIR? Because in that case I won't have to discard my NECC 1Gb and have a mixed 3Gb Memory!? I'm afraid to actually try it so I would appreciate your insights. Thanks much.
G5 Dual Core 2.0 Mac OS X (10.4.7)Yes. You can mix ECC and nonECC as long as you don't pair the ECC with the nonECC. The computer will just treat all RAM as nonECC.
You can keep the original memory as long as the two 512MB DIMMs are always paired with each other. -
Question on How to Use LI and NP Data Comparison Report
Hi,
We are trying to figure out how to make the Transaction Code PC00_M42_LLPD (LI and NP Data Comparison Report) work. What file type (.xls, .txt, etc) should be used? Anyone who is familiar with the transaction, please help.
Best Regards,
BrySomewhere in the Oracle 8.0 documentation it is stated that one
enviroment per each thread is required if I want to ensure
complete concurrency of different threads accessing databases.
But isn't this a waste of resources since only Handle Alloc &
Free functions use Enviroment handle, hence they should be
mutexed for access from concurrent threads.
But the most time-consuming functions are ServerAttach &
SessionBegin which shouldn't be mutexed since they have each
their own Server/Session handle.
So my question is if a single OCI Enviroment is enough for the
most demanding tasks or should I create one enviroment per
thread?
Most folks are happy with a single environment. The mutex on the
env handle is only taken when the OCI library is allocating some
memory for internal operations.
Tomislav. -
How to create Profit and loss account using report painter
Dear All,
Can some one guide me as to how to create Profit and loss account using report painter.
If some one can share the document having steps to be done,would be of great help.
Thanks in advance.
Regards,
GokulHi,
Could you please re-phrase your question? As the report painter is a reporting tool I assume you want to report on P&L accounts and not u201Ccreateu201D them. A few more details on what you intend to report would be useful.
Regards
Karl -
ECCS 6 CONSOLIDATION SET FOR REPORT PAINTER
Hi
I am configuring the Report Painter for the reports on ECCS consolidation. In the T CODE CXSA creating sets there is concept of formual.
Ecaxtly what i want is that, i want to spilt the value of a FS ITEM into 2 Account Group at the rate of 60% and 40%.
and for that i want to us Formula in the creation of Sets. Can anyone please tell me how this formual works.
Thanks & Regards
KrishHi
In a report painter report - Once you have created a SET means you know for what values you want to execute the report...
In your form definition, you will see two check boxes beside your characteristic - i.e. One for Defining a variable for the char and the Other for using a SET..
If you want to use a variable - this means you would specify the values of the projects at the time of execution... For this, click on the relevant check box and you can specify any name in the field "Local Variable"
If you want to use a SET, this means you know for what projects you would like to see the report.. For this, check on the relevant check box and specify your SET there...
If you want to use both the above options, then you must create your set from GS11 and choose the radio button SET VARIABLE
Refer the set 1KOSET from GS13 as a sample...
And see report 1SIP-001 under library 1VK in GRR3.. This report uses 1KOSET under General Data Selection.... You will get an idea for what you want
Regards
Ajay M -
Display items which doesn't have any posting data in report painter
I made some reports by report painter. The problem is that when I run these reports, they can't display the items which doesn't have any posting data. But my customers want to display all items whatever it has been posted or not , can you give me the solution?
BTW, when I made Reports by using Drilldown report, it display all items
Thanks and best regards!In the change report screen in GRR2 go to menu
Formating--> report layout
There in the rows tab select the radio button, Print Zero rows
and in the columns tab select Print Zero columns radio button,
hope this should solve the problem
Thanks
Naveen -
Data for Report Painter report
Hi Gurus,
I have a report painter report S_ALR_87013019 . This uses the
Library 602 (gr23), report - 60BU-001 (GRR3).
Need to create a regular report based on this, Can you Please tell from which tables the values are getting retrieved by this report painter report, or in general on how to trace back the tables used by the report painter.
Also if it uses Set ID as inputs for fetching data, is there a way to get the setid/setclass value.
Thanks,
Regards,
RamanHi
The As on Date balance cant be cumulated...
Eg; you bought inventory worth 10 million in Current year and as of now you have 4 million worth of inventory in stock
Cumulated bal in this case is 10 mil and As on Date balance is 4 million... 4 million is what you will get in SAP reports
The same Key figure which shows values in comp code currency can be used
br, Ajay M -
Read Purchase data using Report painter with CCSS structure
Hi
I'm triying to set-up a simple Budget by material procedure using Rosurces defined as material and KP06 to plan Qty and Values.
All works fine.
Later I need to write a report for Compare Planned vaues and Effective values at material (resource) level.
Unfortunately resource can be used only for planning, so none Effective values is available in CO.
I thought to write a Report using Report painter and library 1VK (CCSS structure) for planned values and import from a LIS table the effective values (Ordered, Invoiced) directly from Puirchasing environment.
Is it possible by using exit or other tools, import LIS data into a CO Report painter program ???
Thanks in advanec for your help.
ClaudioHi
I try to specify better my need.
I've defined using report painter a Z report using Report Painter.
Inside teh new Report, I can use a Customer key-figure which does'nt exist in the CCSS structure.
Is there any solution to Read data from other SAP tables and use these info into the report.
I'm not very frioendly with Set, Key-figures and variables, and I'd like to undestand if my needs can be solved using Report-painter.
Thanks for your help.
Claudio -
Combination of cost center and GL account in Report painter report
Hi Guys,
Im creating a report for profit centers using library 0FL- which uses table FAGLFLEXT in the report painter GRR2.I need to enter cost center with gl accounts in the characteristics.as these cost centers
are assigned with cost elements.Can I do that ? cuz when I enter combination of gl a/c and cost center,I wobn't get nay data but only gl accounts shows the correct data.How to use combination of cost center and gl a/c, or I am good only with gl a/cs.Please suggest.
Regards
ShaunHi
Just check the G/L account assigned in the PO against the cost center, The G/L account assigned may not be the correct one, Check out if any validation is there for the combination, contact your FI-CO guy as there are always restrictions unknown to a MM guy.
Regards -
Final data from report painter
hi experts,
i dont hv knowledge on report painter but i need to grab the data from it urgently.
how do i know what is the internal table that stores the final data result...
pls advise..
thanksHi,
We don't use the Internal table in Report painter/writer.
We use the tables like CCSS and COFIT for FI/CO data reporting.
It have Rows and Columns that are to be designed using Characteristics and key Figures.
So it is completely different from general reporting.
Go through the sap Doc or the link below for further details.
For Report Painter
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/content.htm
For Report Writer
http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/content.htm
Regards,
Anji
Message was edited by:
Anji Reddy Vangala -
Integrate ECC and SRM data to SPM.
Can someone give me step by step process to integrate two systems to SPMu2026
Like : We already done ECC source connection with direct data source method . Now we have to integrate SRM data to SPM.
The data sources has been generated in SRM and replicated to BI, maintaining entries in table OPM_SOURCES also done.
Some can help me how I can take it futher form here
Rgds,
RajThe upload type should be same, for ECC and SRM .. only the datasource need to be changed
Example:
If I you want to integrate Contracts from ECC and SRM, The OPM_SOURCES table should be like BELOW
ECC:
SOURCE ID : SRXCLNT220##ZBBP_TD_CONTR_2
SOURCE NAME : CONTRACTSSRM_DS
UPLOAD TYPE : CONTRACTS
SOURCE TYPE DS
SRM
SOURCE ID : EXSCLNT220##Z_SADSECC6CONTRACT
SOURCE NAME : CONTRACT_DS
UPLOAD TYPE : CONTRACTS
SOURCE TYPE : DS
Rgds,
Raj -
LineChart with current and historical data daily report
Hi all,
I'm new on BAM and I want to know if it is possible to define a LineChart showing information about today and the 30 last days.
Is it possible using two dataobjects, one for today data and an external one provided by ODI with the contents for the last 30 days?
Anyone can provide a sample?
Thanks in advance.Hi,
Both current and historical data are always stored within the same table. There is no option to create separate tables for each that are managed by OWM.
However, you do have the option to use dbms_wm.PurgeTable which can be used to purge a set of data, and optionally store it in a archive table. But, after that is done the data is no longer under Workspace manager's control or the versioning environment. From the description that you gave, I am unsure if this would be sufficient to satisfy your requirements. I am guessing not, but wanted to make you aware of the functionality.
Regards,
Ben -
Exporting and Importing functionality of report painter
Hi all,
I have a requirement where in the Reports that have been created using the Report Painter in Legacy SAP system has to be replicated in a fresh SAP system. Is it possible or manual replication is the only way to go ahead?Check also transport option, as in How to copy Repository Objects between non-connected SAP systems.
Regards,
Raymond
Maybe you are looking for
-
Best practices for setting up users on a small office network?
Hello, I am setting up a small office and am wondering what the best practices/steps are to setup/manage the admin, user logins and sharing privileges for the below setup: Users: 5 users on new iMacs (x3) and upgraded G4s (x2) Video Editing Suite: Wa
-
I recently upgraded the firmware for my Zen Micro and now the sync manager is not working correctly. I re-installed it using the new PlaysForSure version of it and when I sync it, it does not sync all of my songs and it says that errors have occured.
-
R/3 to AS/400 Interface Design Advice
Hi, I need some design adivice on a Synchronous Interface involving R/3 and and an AS/400 system.The requirement is as follows, The shipping Company uses AS/400 systems,Goods to be shipped are scanned at thier end using hand held scanners,Once a box
-
Gave mbp for super drive replacement ends up with display replacement as well
Hey there, My mbp 13" late 2011 was not reading any dvds but reading cds well so i gave it in under warranty to my authorized service provider, they asked me to keep the macbook for 3-4 days as they did not have the super drive in stock. I was suppos
-
Regarding Radio button in selection screen?
Hi experts, In my selection screen I am having two radio buttons. By default I am selecting the first radiobutton and displaying a selection block correspoding to that below. If I am selecting second radio button I want to display another selection b