Mixed 3750G and 3850-X stack and Netfow module compatibility

Anyone doing this?
I can seem to find any documentation regarding a mixed stack AND a netflow module.
If you have a pure 3750-X stack you can run the module in any switch - it doesn't need to be the master.  But what if half the switches are 3750's and half are 3750-X's?  
Can it still read the flows of the older 3750's?

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Just wanted to mention when you mix original StackWise with StackWisePlus, StackWisePlus falls back to StackWise mode.  I.e. you lose some of the "Plus" features.

Similar Messages

  • Mixing ECC and NECC (Non-ECC) RAM Modules

    Hi,
    I have a G5 Dual Core 2.0 with a pair of 512Mb Non-ECC (NECC) RAM installed and I want to upgrade to 3Gb. I'm thinking of getting 2Gb ECC modules and discarding the 1Mb NECC installed. But I came across a phrase in the Apple Manual of my G5 that states "DO NOT MIX ECC and NON-ECC Memory Modules WITHIN A PAIR." Does that mean I can mix ECC and NECC within Memory Banks and NOT within a PAIR? Because in that case I won't have to discard my NECC 1Gb and have a mixed 3Gb Memory!? I'm afraid to actually try it so I would appreciate your insights. Thanks much.
    G5 Dual Core 2.0   Mac OS X (10.4.7)  

    Yes. You can mix ECC and nonECC as long as you don't pair the ECC with the nonECC. The computer will just treat all RAM as nonECC.
    You can keep the original memory as long as the two 512MB DIMMs are always paired with each other.

  • Mixing XDCAM and HDV?? Outputting to SD DVD...

    Hi
    Earlier this year we shot a documentary on a Sony PDW-F350L HD XDCam (great camera, stunning footage - 35Mbps). Working in FCP has been fine.
    We're doing a follow up and budget and logistics dictate that we sadly can't use 350s again (where we're going, carrying 2 Z1s for example is going to be a lot easier). We're also on a fairly steep learning curve (being relatively new to FCP, Compressor etc).
    So I'm looking at options. We know that there are significant differences between say a Z1 and a 350 but from my research so far and from some relatively simple testing mixing Z1 footage (native) and 350 footage on FCP, at least editing on the timeline doesn't seem like it's going to present any problems (although thoughts on that welcome).
    The issue seems to be outputting. In the first instance we'll be outputting to SD DVD. Yes, that old gem...
    Searching round various forums, it seems this problem (HDV - SD) is fairly universal. Solutions seem to range from not working in Native HDV (suggestions vary on the format to ingest in - AIC etc); outputting to different formats first (eg DVCPro HD) and then to MPEG-2; outputting the timeline to tape (DV), re-importing; using some thing like a Matrox MXO to output and others...
    We're aware of the shortcoming of HDV and the compressed nature of the format and our expectations, given our kit are realistic. I've even tried putting some PD150 footage on the timeline but that's just not going to cut it.
    So, I've got to put a kit list together by next week and wondered if anyone had any thoughts on:
    1) Mixing XDCAM and HDV on the timeline and any gotchas we should watch out for.
    but more importantly
    2) Any suggested routes I can look at to get some reasonable output with these two formats on the timeline - particularly HDV (don't think we'll have time to look at the Matrox route right now).
    Many thanks in advance for any thoughts.
    Cheers

    Thanks Andy, Michael
    That's good input. From an editing point of view we seem to be ok. Although, Michael, I take your point and that's a good suggestion.
    The main problem is the workflow to create a decent SD DVD without the artefacts caused by compression/motion etc in HDV (and to some extent XDCAM).
    Have read the prores whitepaper at
    http://images.apple.com/finalcutstudio/resources/whitepapers/L342568A_ProResWP.pdf
    And looked a little more into understanding GOP structures and it seems that ProRes will help in terms of editing.
    The white paper seems to suggest that converting to ProRes, because it uses I frame–only encoding "Ensures consistent quality in every frame and no artifacts from complex motion. "
    We'll try some tests but, does anyone know if this is true?
    But it also seems that deinterlacing may solve some of the horrendous vertical edge rippling we're getting on the HDV footage when outputting to SD DVD - although if I'm honest I'm not sure how we achive that with our current setting.

  • Mixing static and dynamic content in a single outputText value causes NPEs

    Hi,
    I am having a problem and I'm wondering if it is a result of my error or if this is a bug.
    I am mixing dynamic and static content in the value attribute of tags (e.g., outputText). On initial page load, everything works fine. However, if the same view is reloaded (e.g., after a failed validation) I get an NPE from JSF:
    [#|2006-10-24T08:49:03.756-0500|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=12;|StandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
    java.lang.NullPointerException
            at com.sun.faces.el.MixedELValueParser.getNextToken(MixedELValueParser.java:140)
            at com.sun.faces.el.MixedELValueParser.parse(MixedELValueParser.java:123)
            at com.sun.faces.el.MixedELValueBinding.getValue(MixedELValueBinding.java:60)
            at javax.faces.component.UIOutput.getValue(UIOutput.java:147)
            at com.sun.faces.renderkit.html_basic.HtmlBasicInputRenderer.getValue(HtmlBasicInputRenderer.java:82)
            at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.getCurrentValue(HtmlBasicRenderer.java:201)
            at com.sun.faces.renderkit.html_basic.LabelRenderer.encodeBegin(LabelRenderer.java:128)
            at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:683)
            at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:443)
            at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:233)
            at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
            at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
            at com.sun.faces.renderkit.html_basic.GroupRenderer.encodeChildren(GroupRenderer.java:130)
            at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
            at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
            at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:233)
            at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
            at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
            at com.sun.faces.renderkit.html_basic.GroupRenderer.encodeChildren(GroupRenderer.java:130)
            at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
            at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
            at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:233)
            at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
            at javax.faces.webapp.UIComponentTag.encodeChildren(UIComponentTag.java:609)
            at javax.faces.webapp.UIComponentTag.doEndTag(UIComponentTag.java:546)
            at com.sun.faces.taglib.html_basic.PanelGridTag.doEndTag(PanelGridTag.java:460)
            at org.apache.jsp.registration_jsp._jspx_meth_h_panelGrid_0(registration_jsp.java:324)
            at org.apache.jsp.registration_jsp._jspx_meth_h_form_0(registration_jsp.java:223)
            at org.apache.jsp.registration_jsp._jspx_meth_f_view_0(registration_jsp.java:157)
            at org.apache.jsp.registration_jsp._jspService(registration_jsp.java:118)
            at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:105)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
            at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:336)
            at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:297)
            at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:247)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
            at sun.reflect.GeneratedMethodAccessor188.invoke(Unknown Source)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:585)
            at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
            at java.security.AccessController.doPrivileged(Native Method)
            at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
            at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
            at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
            at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
            at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
            at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
            at java.security.AccessController.doPrivileged(Native Method)
            at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
            at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:723)
            at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:482)
            at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:417)
            at org.apache.catalina.core.ApplicationDispatcher.access$000(ApplicationDispatcher.java:80)
            at org.apache.catalina.core.ApplicationDispatcher$PrivilegedForward.run(ApplicationDispatcher.java:95)
            at java.security.AccessController.doPrivileged(Native Method)
            at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:313)
            at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:326)
            at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:132)
            at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
            at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:248)
            at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
            at javax.faces.webapp.FacesServlet.service(FacesServlet.java:194)
            at sun.reflect.GeneratedMethodAccessor202.invoke(Unknown Source)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:585)
            at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
            at java.security.AccessController.doPrivileged(Native Method)
            at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
            at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
            at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
            at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
            at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
            at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
            at java.security.AccessController.doPrivileged(Native Method)
            at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
            at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
            at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
            at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
            at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
            at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
            at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
            at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
            at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:132)
            at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
            at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
            at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:189)
            at com.sun.enterprise.web.connector.grizzly.ProcessorTask.doProcess(ProcessorTask.java:604)
            at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:475)
            at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:371)
            at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:264)
            at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:281)
            at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:83)My code looks like this:
    <h:outputText escape="false"
              value='<link href="#{myBean.styleSheet}" rel="stylesheet" type="text/css"  />' />If I replace this with a much more convoluted set of tags, it works:
    <h:outputText escape="false"
              value='<link href="' /><h:outputText escape="false" value="#{myBean.styleSheet}"
              /><h:outputText escape="false" value='" rel="stylesheet" type="text/css" />' />So is the problem that I am mixing dynamic and static content with a single value? If so, why does it work on the first view, and not after?
    If it matters, I'm using the reference implementation version 1.1 (as included with NetBeans 5.5RC2) on SuSE 10.0 w/ JDK 1.5_09.
    Thanks,
    Bill

    Yes, that's how I originally had it, but then changed it to the outputText approach since a single tag could do what I wanted, as long as I was allowed to mix static and dynamic content within a single value.
    I think this is a bug in JSF 1.1, since if what I am doing is illegal, it should throw an exception on the first page view, not work on first view and throw an exception on subsequent views. I'm guessing that this has something to do with the fact that on first page view it only runs the restore view and render response JSF phases, while on subsequent requests all of the phases will be run, and it's in one of those other phases that the exception is thrown.
    For now, multiple tags is the work-around, I guess.
    Thanks,
    Bill

  • Adding a jar to the classpath of an executable jar (mixing -jar and -cp)

    Hello,
    frankly I hesitated over posting this to "New to Java"; my apologies (but also, eternal gratefulness) if there is an ultra-simple answer I have overlooked...
    I integrate a black-box app (I'm not supposed to have the source) that comes packaged as an executable jar (with a Manifest.MF that specifies the main class and a bunch of dependent jars), along with a few dependent jars and a startup script. Long story short, the application code supports adding jars in the classpath, but I can't find a painless way to add a jar in its "classpath".
    The app's "vendor" (another department of my customer company) has a slow turnaround on support requests, so while waiting for their suggestion as to how exactly to integrate custom jars, I'm trying to find a solution at the pure Java level.
    The startup script features a "just run the jar" launch line:
    java -jar startup.jarI tried tweaking this line to add a custom jar in the classpath
    java -cp mycustomclasses.jar -jar startup.jarBut that didn't seem to work ( NoClassDefFound at the point where the extension class is supposed to be loaded).
    I tried various combination of order, -cp/-classpath, using the CLASSPATH environment variable,... and eventually gave up and devised a manual launch line, which obviously worked:
    java -cp startup.jar;dependency1.jar;dependency2.jar;mycustomclasses.jar fully.qualified.name.of.StartupClassI resent this approach though, which not only makes me have to know the main class of the app, but also forces me to specify all the dependencies explicitly (the whole content of the Manifest's class-path entry).
    I'm surprised there isn't another approach: really, can't I mix -jar and -cp options?
    - [url http://download.oracle.com/javase/6/docs/technotes/tools/windows/classpath.html]This document (apparently a bible on the CLASSPATH), pointed out by a repited forum member recently, does not document the -jar option.
    - the [url http://download.oracle.com/javase/tutorial/deployment/jar/run.html]Java tutorial describes how to use the -jar option, but does not mention how it could play along with -cp
    Thanks in advance, and best regards,
    J.
    Edited by: jduprez on Dec 7, 2010 11:35 PM
    Ahem, the "Java application launcher" page bundled with the JDK doc (http://download.oracle.com/javase/6/docs/technotes/tools/windows/java.html) specifies that +When you use [the -jar] option, the JAR file is the source of all user classes, and other user class path settings are ignored+
    So this behavior is deliberate indeed... my chances diminish to find a way around other than specifying the full classpath and main class...

    I would have thought that the main-class attribute of the JAR you name in the -jar option is the one that is executed.Then I still have the burden of copying that from the initial startup.jar's manifest. Slightly less annoying than copying the whole Class-path entry, but it's an impediment to integrating it as a "black-box".
    The 'cascading' behavior is implicit in the specification
    I know at least one regular in addition to me that would issue some irony about putting those terms together :o)
    Anyway, thank you for confirming the original issue, and merci beaucoup for your handy "wrapper" trick.
    I'll revisit the post markers once I've actually tried it.
    Best regards,
    Jérôme

  • Since installing IOS 5 on my iphone4, the music gets mixed up and sometimes it won't even play it !

    Since installing IOS 5 on my iphone4, the music gets mixed up and sometimes it won't even play it !
    Even after many tries of sync, it won't work like before...
    Anyone had the same problem?

    Same problem here, but I found a solution that worked for me:
    Altered from original solution from Emily P:
    Okay, mine now works here is what I did.
    plug in the iPhone, iPad etc
    in iTunes select the phone or iPad
    Under Summary uncheck "Sync with this....."
    Under "Music" uncheck the "Sync Music"
    Sync
    Let it remove all the songs, dont worry it will come back no problems.
    Once that is all done all the music on the phone or ipad should be gone.
    Now check them both back on, sync, and everything should copy back onto it.
    Working now !!!!!

  • How do I mix text and Html format in a java mail?

    How do I mix text and Html format in a java mail? some part I want to keep the text format, the other part I want to use Html functions(like fond, color, etc)

    You don't mix them. Pick one or the other.
    However if you want to have a text version and an HTML version, so that mail readers that don't handle HTML can see regular text instead, then you could produce a "multipart/alternative" message. There's an explanation of how to do that in this article:
    http://www-128.ibm.com/developerworks/java/library/x-xmlist2/

  • Word 2007 mail merge : problem with mixed portrait and landscape orientations

    Hi there,
    I have a 3 pages document Word 2007 file
    This is a mail merge I want to export in PDF using Adobe Acrobat Printer,
    then send "big" PDF to printing.
    page 1 is PORTRAIT
    page 2 is PORTRAIT
    page 3 is LANDSCAPE
    In PDF pages 1 and 2 are perfectly fine, inside an A4 format (width=210 height=297mm or something)
    but for page 3, system changed to a "double" sized page (A3 width=297 height=420) and printed my stuff at the 1st top middle of big page.
    So I have a big "double" sheet, oriented PORTRAIT, with my stuff in 1st half, and a blank in 2nd half.
    It seems that system did not rotate the page... and just put the stuff into a bigger sheet to "solve" at best.
    I would like the same size of paper (A4) but in landscape : width=297 height=210
    I have already seen many PDF with mixed portrait and landscape orientations, so what's the thing ?
    With my advanced thanks,
    And greetings from Paris, France !
    Vince

    Some questions:
    Which version of office were you using before? 2003?
    Are the data files on a network, or on your local machine? If they are on a network, can you make a copy of one of them on your local machine and try again?
    Can you open the files directly in Excel? What extension do they have (.xls, or something else?) I am wondering whether access to other file types has been left blocked on your machine but is allowed on your colleague's machine.
    Are you just opening the mail merge main document and seeing this message? If so, do you see the same thing if you start with a new document and try to connect to one of these data sources?
    Can you confirm that the message is about Access even though you are trying to connect to an Excel file?
    (Also, office 2007 has some new stuff - that let's you specify that certain folders are "trusted" . I don't think that ever affected MailMerge but it may be as well to make sure that your documents and data sources are in trusted locations).
    Also worth trying to start Word in "Safe mode" - see, e.g. http://office.microsoft.com/en-gb/word-help/work-with-office-safe-modes-HP010140792.aspx
    Peter Jamieson

  • How to auto rotate Images on Full Screen Slideshow if pictures were taken mixed Portrait and Landsca

    In Muse: How to auto rotate Images on Full Screen Slideshow if pictures were taken mixed Portrait and Landscape

    There is no way that Muse would automatically rotate the images. What you can instruct Muse to do is whether you want to show all image content and leave blank space in either direction OR scale the image to fill the frame resulting in some cropping, but filling the otherwise blank space.
    The options are Fit Content Proportionally and Fill Frame Proportionally respectively.
    Cheers,
    Vikas

  • Mix published and unpublished events in one calendar?

    Just got an iPhone.
    Is there a way to mix published and unpublished events in one calendar?
    I've heard that other calendar software have this option.
    With iCal on a Mac it's possible to choose which calendars to view, so then it's not a problem to have one published and one unpublished calendar.
    But with iCal on iPhone you can only choose between viewing ONE and ALL calendars.
    I subscribe to a bunch of other peoples calendars, so viewing ALL is never an option..
    So now I would like to write all my events, published and private, into ONE calendar. Is that possible?
    Anyone?

    Yes. I tried changing the setting to Sync All Events (instead of the time limited sync) and let it refresh. No change. No display
    I also tried rescheduling the event by one hour on the same day (no other changes), then save. No change. No display.
    I ended up deleting the events and re-entering them, with identical information (including the recurring end date, remarks, etc., you name it), and then the events appeared like the rest of them in the same calendar.
    I'd still like to know if there is a solution to the original problem. I'm still concerned that other events, maybe in the other calendar as well, are no appearing and it's impossible to rely on a sample or to verify every event.
    Thanks for your assistance.

  • Mix ECCS and FI data in Report Painter

    Is it possible to mix data from ECCS and FI modules in one report, using Report Painter?
    Thanks,
    Nuno Barros

    In the change report screen in GRR2 go to menu
    Formating--> report layout
    There in the rows tab select the radio button, Print Zero rows
    and in the columns tab select Print Zero columns radio button,
    hope this should solve the problem
    Thanks
    Naveen

  • Mixing public and private networks on the same switch

    Hello Everyone,
    I know this may get some security engineers in frenzy but wanted to know if there is a safe way to mix public and private networks on the same switch. 
    We have many remote offices that we want to add public wifi and a couple of other services that would be completely outside of our internal network.  Each office has a 3750 with plenty of open ports.  How can I safely create a vlan for public access on these switches which currently have our internal network on.  I have read that people are doing this to save on the cost of purchasing a dedicated switch.  Some people are using access lists and one person mentioned creating a private vlan for the public network.  I looked up private vlan and it seemed bit confusing.
    Is this recommended?  If not what would be the safest way to do this?
    Thanks Everyone

    Disclaimer
    The  Author of this posting offers the information contained within this  posting without consideration and with the reader's understanding that  there's no implied or expressed suitability or fitness for any purpose.  Information provided is for informational purposes only and should not  be construed as rendering professional advice of any kind. Usage of this  posting's information is solely at reader's own risk.
    Liability Disclaimer
    In  no event shall Author be liable for any damages whatsoever (including,  without limitation, damages for loss of use, data or profit) arising out  of the use or inability to use the posting's information even if Author  has been advised of the possibility of such damage.
    Posting
    How "safe" is relative.  If your running just one VLAN on a switch, that's would be the safest (basically the same as mixing traffic on the same wire - separation is done else where).
    If you multiple VLANs on a switch, then you need to determine how likely someone might figure out a way to breach the VLAN barriers.  (This isn't so easy on newer switches.)  If the VLAN isolation is breeched, then you need to examine what does that imply from a security perspective (for example can someone now inject or receive other VLAN traffic).
    For most purposes, I don't see mixing public and private VLANs, alone, on the same switch as much of a risk.  More of a concern is what can be reached on either VLAN and how well it's protected.

  • I used to have tabs that reloaded every few minutes, but I downloaded the new Tab Mix Plus and now it doesn't work

    I used to have my tabs reload every 2 - 5 minutes. I downloaded the new Tab Mix Plus and now when I click on "Reload all tab: button I don't get the drop down box any longer.
    Steve

    Tab Mix Plus support is here. <br />
    http://tmp.garyr.net/forum/

  • Https site with no mixed content and EV cert is shown as mixed and not identifiying itself

    My site https:orderform page contains only https images and website has an EV cert that is valid and current. With history cleared and visiting page for first time Firefox reports that page contains mixed content and that site does not identify iteself.
    Hitting F5 to refresh the page address bar correctly shows green with no mixed content popup and that side idenfies itself.
    SSLCertificateChainFile has been added and this makes no difference.
    Problem does not occur in other browsers (IE, Safari, Chrome).
    A new FF profile has been tried but same problem occurs.
    Why would refeshing the page work?
    Problem affects all firefox browsers 3.5 to 14.01. I dont know about those <3.5.
    I have read and tried most suggestions in forum and elsewhere but cant find a solution.
    I have not provided the url as this is my order page and its important for me to see genuine visitors.

    First a reply to Jsher2000
    Thank you for your suggestions. Yes and Yes did this ages ago but no non-https content.
    I have found a workaround for what appears to be a bug in Firefox:-(
    Here is the non-perfect workaround. First Detect firefox
    xUA=navigator.userAgent.toLowerCase()
    xFf=xUA.indexOf('firefox')!=-1
    if(xFf) top.location.href='https://ord.html'
    else top.location.replace( 'https://ord.html' )
    The current non-secure page is being replaced with a secure one.
    Internet Quote:
    "The difference between location.href and location.replace is that the former creates a new history entry on the visitor's browser meaning that if they hit the back button, they can get in a 'redirection loop' which is usually undesirable and may have unwanted side effects."
    It appears that FF is using some content (cached) from the previous non-secure page when replacing - leading to the mixed content and non-identified site. An F5 refresh or reload of current page will show that site identifies iteself and there is no mixed content.
    In summary its a Firefox Bug.

  • Is it possible to mix italic and non-italic fonts in an axis label?

    Is it possible to mix italic and non-italic fonts in an axis label in diadem reports?

    No, there is no chance to do this.
    You can only use the "Textobjekt" to mix italic and non-italic fonts.
    Thanks
    Klaus D

Maybe you are looking for