Mixed Canon XL-H1A and HV30 capture - correct workflow?

I have a mixture of HV30 and XL-H1A footage of the same outdoor wedding (actually, 2 Canon HV30s and one Canon XL-H1A). All cameras were in fixed locations. The cameras were all on 'automatic'. Recording on all was in 30F. I captured all the tapes into FC Pro (the new one) using ProRes 4:2:2.
The files from the XL-H1A are marked None for field dominance and the ones from the HV30s are marked "upper".
Is there something I should do to make these the same?
Did I do the capture correctly?
Thanks in advance.

I think you might get more responses in the Final Cut Pro forum.
I also suggest going to www.dvinfo.net/conf where there's a community of experienced people very willing to help with stuff like this.

Similar Messages

HT200166 I have a Canon XL2 that will not capture video properly in fcp 10, where it does capture properly in fcp6 and 7. How can I "fix" fcp 10 to do this correctly?

My Canon XL2 (1394/firewire 400) will not capture correctly in fcp10, but it did when I had fcp 7 on the same computer. Is there a software fix that will allow me to use the XL2 with this program?

I just want to get this clear.
With FCP 7 and earlier you could capture a whole tape in one continuous 60 minute long clip.
FCP X cannot do that. It is designed to split the tape into its individual clips, however long they may be.
Are you saying that when you try to capture clips of 10 seconds or so, it only captures the first 4 seconds?
All I can suggest is that you trash the preferences with this free app.
Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that only FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.
There is absolutely no danger in trashing preferences and you can do it as often as you like.
The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones . . . instantly.

Canon Vixia HV30 Capture Problems

I am trying to capture with my Canon HV 30 camera with Adobe Premiere Elements 7.0
Here are the steps of my unsuccessful captures.
1. Get media
2. HDV Camcorder
3. Capture source: Canon HV30 camera appears in box
4. I can control the playback functions of the camcorder in elementsI(FF,RW)
5. When I click play, camera plays tape and timeline displays correct tape time. I see no video in the playback window.
6. When I click capture, camera plays but no video is seen in playback window. Only an image with chinese text.
7. When I stop capture, playback window loses image with chinese text and an image of my video is seen.
8. When I attempt to open captured video file, it does not play and properties indicate a file with 1 kb.
I am using a Toshiba Satellite a355-s6925 laptop for transfer.
Vista 64
Please help very frustrated user,
Thank you,
Frank

Premiere Elements isn't cleared for Vista 64. It often works, in automatic 32-bit compatibility mode, but occasional driver issues (such as it appears you're experiencing) can occur.
First ensure that you have all the latest drivers. Go to your graphic card's manufacturer's site rather than Windows Update to ensure you have the very latest for your graphics card, per the FAQs to the right of this forum.
http://forums.adobe.com/thread/416585?tstart=0
Also ensure that you have the latest Quicktime.
If that and possibly an uninstall/reinstall of Premiere Elements still doesn't fix it, you may need to contact Adobe Tech Support.
Although, as I said, this isn't a 64-bit program, so there are no guarantees.

Canon PIXMA 860 and 560 not recognized by Image Capture

I can scan from the printers to my MacBook. And I go to System Prefernces / Printers and Faxes and both are shown as printers and as scanners. I can open from their and scan but when I open image capture it doesn't find any scanners.
I down loaded and installed both the newest canon printer and scanner drivers as well as the newest ICA driver. Still they are not recognized.
What am I missing?

ATC7 wrote:
Just for testing purposes, I removed the canon printer, removed all canon software and updates from my system and then used the original CD that came with my 870 to reinstall the printer and lo and behold, Image Capture started working again for wireless scanning.
Hello and thanks for the feedback.
There are two scanner drivers available for many of the new models of Canon AIOs. There is the ICA driver and the Canon scanner driver.
During my tests on clean builds of 10.6.x I found that my Canon AIOs were able to print and scan via wireless by simply installing the Canon update provided by Apple. This update consisted of the then latest printer driver for many models of Canon AIO and inkjet and the ICA driver. Canon's scanner driver was not included as part of this download from Apple.
The ICA driver is installed in HD > Library > Image Capture > Devices and the package is called Canon IJScanner1. Later versions of the ICA driver also installed another package, Canon IJScanner2. These ICA drivers provide a minimal amount of scanning selections and only appear to work with Image Capture and Preview. Other applications like Canon's own MP Navigator and Adobe Acrobat Pro will not scan with just the ICA driver installed. The Canon scanner driver for the respective model is required.
From what you have said and from my own testing I propose that the original CD did not contain the ICA driver but the Canon scanner driver for the MX870. And with only this driver installed you were able to scan using Image Capture via the wireless. I don't recall ever testing a 10.6 build where only the Canon scanner driver was installed and not the ICA driver (it is present by default on 10.6 but only has older models of Canon AIO's - your MX870 is not there). Had I tested this I believe that I would have been able to scan via wireless using Image Capture.
I also propose that once you installed the Canon v2.4.1 update, which contains a version of the ICA driver package that is also available from Canon web sites, then Image Capture stopped using the Canon MX870 scanner driver and used the ICA driver instead, thus stopping you from wireless scanning.
Right now I am using a new build of 10.6.6 on my MBPro. So that I could print to my MP990 at home and an MG6150 at work I simply installed the v2.4.1 update and have printer and scanner queues in Print & Fax for both. I have not installed scanner drivers for either device and at home with my MP990 Image Capture does not show any device being available, while Preview does show the MP990 once I select 'Import from Scanner > Include Networked Devices'. Also, Acrobat Pro 9 does not show my MP990 being available.
And with regards to the v2.4.1 update, the drivers included are provided by Canon to Apple, just as the other vendor drivers are provided to Apple, to make life easier for us Mac users. The drivers are available individually and get downloaded and installed automatically when the respective model is connected to the Mac and no local driver is present. As for the package including all these individual vendor drivers, this would be created by Apple.
Pahu

Tethered Capture Canon 600D/T3i and L/R 4

Hi, I asked the question back on the 11th March 2012 without a reply!! and ask it again now "Why is it still not possible to use the tethered capture option with a Canon T3i/600D"?
I note that the
Canon EOS 5D Mark III — introduced with release candidate 1 (March 29, 2012)
Canon EOS 60Da
are both included now but for the consumer who cannot afford 5D Mk IIIs Adobe have left them at the starting line.
There must be thousands of 600D/T3i owners who have also purchased Lightroom 4 and feel a little frustrated.
Yes, I no you can use the Canon software to access tethered capture but I own L/R 4 and would as a customer of Adobe prefer to use this option in L/R.
The camera has been on the market for some time so there really is no excuse not to have this option available.
Thank You
Russ

russellsnr wrote:
Hi, I asked the question back on the 11th March 2012 without a reply!! and ask it again now "Why is it still not possible to use the tethered capture option with a Canon T3i/600D"?
Because it hasn't been implemented.
I note that the
Canon EOS 5D Mark III — introduced with release candidate 1 (March 29, 2012)
Canon EOS 60Da
are both included now but for the consumer who cannot afford 5D Mk IIIs Adobe have left them at the starting line.
The 5DIII is NOT supported by the tethering module yet:
http://helpx.adobe.com/lightroom/kb/tethered-camera-support-lightroom-4.html
I suspect the 60Da is (even though it isn't on the list) because it's just a 60D with a different IR filter and some different software. It might not be, however, due to the different software.
There must be thousands of 600D/T3i owners who have also purchased Lightroom 4 and feel a little frustrated.
I suspect very few owners of the Rebel series are desperately in need of tethered capture.
Yes, I no you can use the Canon software to access tethered capture but I own L/R 4 and would as a customer of Adobe prefer to use this option in L/R.
Frankly, I'd rather use the Canon software than Lightroom even if it were supported within LR. LR doesn't allow you control over any camera functions and it doesn't allow you to use LiveView. It's just a remote shutter release with auto-import.

Downloaded Canon printer/scanner drivers for Canon PIXMA MP520 and MX860 on Mac Book laptop, and they worked. However, when I downloaded the same two drivers on Mac Book Air, neither worked.

Downloaded Canon printer/scanner drivers for Canon PIXMA MP520 and MX860 on Mac Book laptop, and they worked. However, when I downloaded the same two drivers on Mac Book Air, neither worked.

I wasn't aware that VueScan charged a yearly license.
You simply launch Image Capture and if the scanner is recognized it will be listed in the SHARED list in the left display column. Select the scanner name and the app will start an overview scan. You will also see a list of scanning options in the right display column (resolution, paper size, file output format, etc.
The above description is when everything is working correctly, which has been the case for me.
Good luck.

Canon XH G1s and Premiere CS4

I just bought a Canon XH G1s and tried to transfer some footage to Premiere. It would not allow me to view the footage while importing, even though it did import (with some problems on a few of the clips, like saying that one clip had been captured at 110 fps). I am using a new G5 with Premiere CS4, and am hoping that the camera is compatible. I would hate to think I spent $7,000 for a camera that won't work with CS4's Premiere Pro. Yikes! Any help would be appreciated.

Thats correct no image in the capture screen while capturing.
You could use HDVSplit instead, which also does scene splitting which Premiere doesn't.

Canon Vixia camcorder and Imovie09 anyone have any issues?

Hi I have a 2009 2.66 ghz Quad Core Mac Pro. I plan on purchasing a high definition camcorder, I was very interested in the Canon Vixia series but was concerned because I read that people had issues with their canon Vixia camcorder and Imovie. Should I be concerned? Anyone have any issues with the Canon VIXIA HFS100, HF200, or the HF20 and Imovie09 on their 2009 intel Mac Pro? I don't want to spend 750-900 dollars on a camcorder if I'm going to have issues importing the videos into my mac. Any info is greatly appreciated

Sheryl Kingstone wrote:
Other issues were around the 1080p is not really 1080p. meaning it says it records 30p, but it imports it at 60i. Don't really understand why.
Today I tried 30p on my Canon HF-S100 for the first time. If I understand correctly it's still saving the video in 60i format -- e.g. all of the odd scan lines in one field, then all of the even scan lines in the next field. The visible difference is that you don't see the interleaving when you view the results in iMovie or Final Cut Pro.
With 30p it's as if the camera captures an entire frame at once, then saves it as two interleaved 60i fields. By contrast, when the camera is recording 60i it captures one field (every other scan line) and records that, then captures and records the other field separately.
In other words, in 60i mode, the subject may move between the recording of the first field and the recording of the 2nd field, resulting in interleave "jaggies". In 30p mode the subject doesn't move between the recording of the fields, since both were captured at the same time.
I wish I could insert some pictures to better explain myself

Strange black and white capture on DV NTSC camera

Hello,
I am currently using a Canon ZR100 camcorder for a project of mine, and I capture the film with Premiere Pro CS3. It has been capturing correctly in color for a week, and then suddenly, just two days ago, it began capturing in a monochrome/black and white. On the preview window while it is capturing the film, it is black and white, but when I actually have the clip on the timeline of PP, it is in color. When I render the video, it turns back into black and white. This is all very confusing, because the clip turns into color once placed on the PP timeline.
If someone knows what is going on, like a broken firewire or something, please help!
Thank you

Project settings?

Preview and Image Capture Not Recognising Scanner

Preview and Image capture have stopped recognising my networked Canon MX350 scanner. It seemed to occur after I used PhotoScore to scan some sheet music but that could be coincidence. I deleted the scanner driver and reinstalled it from the Canon website together with the MP Navigator software, and I am now able to scan from MP Navigator but not Image Capture or Preview. I have run Software Update but no updates are available.

Apple's official documentation only provides an information about printing by using this device - scanner is not listed. I would suggest to look for specific drivers on Canon's official webpage.
OS X: Printer and scanner software available for download - Apple Support

Adobe Camera Raw Save Settings and Lens Profile Corrections Help

I have been fooling around with Adobe Camera Raw’s (ACR) ability to save settings so that I can apply them to other images. I’m able to set things such as clarity, vibrance, camera profile etc. What I want to do is enable Lens Profile Corrections and have it automatically detect the lens information for future images, apply no distortion corrections and apply vignetting and chromatic aberration corrections. However, when I try this, the Lens profile sticks on “Canon EF 24-105mm f/4 L IS USM” (which is what I used for creating the settings to be saved) regardless of the lens used for the image that I am applying the settings to. Is there a way do this?
I’m using Photoshop CS6 and ACR current version.
Thanks,
Mike

You should see an Adobe Standard profile and perhaps an ACR x.x profile for your camera, but Adobe does not make Camera-centric profiles (landscape, portrait, camera neutral, etc) for most cameras unless they are Canon DSLRs, Nikon DSLRs, one Leica and a few Pentax cameras.
On a Vista/Win7 system you can verify what models of cameras are supported by Adobe by looking for profiles in:
C:\ProgramData\Adobe\CameraRaw\CameraProfiles
The lens profiles are in:
C:\ProgramData\Adobe\CameraRaw\LensProfiles
There are comparable directories on Win XP.

I am using a Canon 640 printer and my MPNavigator will not remain open. It pops open then quickly closes. I've used it for several years but it just started doing this. What can I do to fix this problem?

I am using a Canon 640 printer and my MPNavigator will not remain open. It pops open then quickly closes. I've used it for several years but it just started doing this. What can I do to fix this problem?

I had a similar problem with a Canon MP800R under Mac OS X 10.9.2 Mavericks.
In my case, the MP Navigator app in the dock was linking to the wrong file.
It linked to Applications > MP Navigator 2.1.app > Contents > Resources > MP Navigator.app, but it should link to the "main" app, probably under Applications > MP Navigator 2.1.app.
After pulling the correct MP Navigator app file to the dock, I can start MP Navigator again by clicking on it in the dock. However, when clicking on it, a second MP Navigator icon will show up in the dock and stay there until the app is closed. By the way, the MP800R scanner also works (although officially not supported by Canon).

When I mix JSTL 1.0 and 1.1 taglib declarations, it causes a ParseException

When I mix JSTL 1.0 and JSTL 1.1 taglib declarations, it causes a ParseException on some of my servers, but not all of them.
Here is the block of code that's giving me trouble:
<%@ taglib prefix="c" uri="http://java.sun.com/jstl/core"%>
<%@ taglib prefix="fn" uri="http://java.sun.com/jsp/jstl/functions"%>
<c:set var="TEXTVARIABLE">|STRINGOFTEXT|</c:set>
<c:set var="OTHERTEXTVARIABLE">${fn:contains(TEXTVARIABLE, '|STRINGOFTEXT|')}</c:set>And here is the exception :
*javax.servlet.jsp.JspException: com.caucho.jsp.JspLineParseException: /WEB-INF/jsp/online/system/modules/com.MYCOMPANY.marketing/templates/common/MY_JSP_PAGE.jsp:1: tag = 'out' / attribute = 'value': An error occurred while parsing custom action attribute "value" with value "${fn:contains(TEXTVARIABLE, '|STRINGOFTEXT|')}": org.apache.taglibs.standard.lang.jstl.parser.ParseException: EL functions are not supported.*
However, everything works fine if I change the URI for the core declaration to *http://java.sun.com/jsp/jstl/core*
So here's the really weird part: for some reason, mixing 1.0 and 1.1 taglib declarations only causes an exception on two of my servers, my staging server and my production server. It causes no problems at all on my local machine or my development server. Why is this? What could possibly be causing this difference in behavior?
The three servers are extremely similar in setup and configuration. The JSP page is being served up by OpenCMS 7, and I'm using the Caucho's Resin webserver. I understand that you don't know how my servers or CMS are set up, but really, what I'm looking for is ideas. Any ideas at all would help, this problem has been driving me absolutely batty. Even if you don't know what could be causing the problem, if you have any suggestions at all for how I could approach the problem, that would be extremely helpful. I just don't understand what could cause this difference in behavior between my servers.
For reference, here's the first part of the stack trace (there's a character limit in this forum, so unfortunately I can't post the whole thing) :
*javax.servlet.jsp.JspException: com.caucho.jsp.JspLineParseException: /WEB-INF/jsp/online/system/modules/com.MYCOMPANY.marketing/templates/common/MY_JSP_PAGE.jsp:1: tag = 'out' / attribute = 'value': An error occurred while parsing custom action attribute "value" with value "${fn:contains(TEXTVARIABLE, '|STRINGOFTEXT|')}": org.apache.taglibs.standard.lang.jstl.parser.ParseException: EL functions are not supported. at*
*org.opencms.jsp.CmsJspTagInclude.includeActionWithCache(CmsJspTagInclude.java:369) at*
*org.opencms.jsp.CmsJspTagInclude.includeTagAction(CmsJspTagInclude.java:241) at*
*org.opencms.jsp.CmsJspTagInclude.doEndTag(CmsJspTagInclude.java:472) at*
*_jsp._WEB_22dINF._jsp._online._system._modules._com__MYCOMPANY__marketing._templates._MAIN_0PAGE__jsp._jspService(_MAIN_0PAGE__jsp.java:153) at*
*com.caucho.jsp.JavaPage.service(JavaPage.java:60) at*
*com.caucho.jsp.Page.pageservice(Page.java:579) at*
*com.caucho.server.dispatch.PageFilterChain.doFilter(PageFilterChain.java:179) at*
*shared.filter.RemoteAddrFilterBase.doFilter(RemoteAddrFilterBase.java:57) at*
*com.caucho.server.dispatch.FilterFilterChain.doFilter(FilterFilterChain.java:70) at*
*com.caucho.server.webapp.DispatchFilterChain.doFilter(DispatchFilterChain.java:115) at*
*com.caucho.server.cache.CacheFilterChain.doFilter(CacheFilterChain.java:175) at*
*com.caucho.server.dispatch.ServletInvocation.service(ServletInvocation.java:229) at*
*com.caucho.server.webapp.RequestDispatcherImpl.include(RequestDispatcherImpl.java:485) at*
*com.caucho.server.webapp.RequestDispatcherImpl.include(RequestDispatcherImpl.java:350) at*
*org.opencms.flex.CmsFlexRequestDispatcher.includeExternal(CmsFlexRequestDispatcher.java:194) at*
*org.opencms.flex.CmsFlexRequestDispatcher.include(CmsFlexRequestDispatcher.java:169) at*
*org.opencms.loader.CmsJspLoader.service(CmsJspLoader.java:1193) at*
*org.opencms.flex.CmsFlexRequestDispatcher.includeInternalWithCache(CmsFlexRequestDispatcher.java:423) at*
*org.opencms.flex.CmsFlexRequestDispatcher.include(CmsFlexRequestDispatcher.java:173) at*
*org.opencms.loader.CmsJspLoader.dispatchJsp(CmsJspLoader.java:1227) at*
*org.opencms.loader.CmsJspLoader.load(CmsJspLoader.java:1171) at*
*org.opencms.loader.A_CmsXmlDocumentLoader.load(A_CmsXmlDocumentLoader.java:232) at*
*org.opencms.loader.CmsXmlContentLoader.load(CmsXmlContentLoader.java:52) at*
*org.opencms.loader.CmsResourceManager.loadResource(CmsResourceManager.java:964) at*
*org.opencms.main.OpenCmsCore.showResource(OpenCmsCore.java:1498) at*
*org.opencms.main.OpenCmsServlet.doGet(OpenCmsServlet.java:152) at*
*javax.servlet.http.HttpServlet.service(HttpServlet.java:115) at*
*javax.servlet.http.HttpServlet.service(HttpServlet.java:92) at*
*com.caucho.server.dispatch.ServletFilterChain.doFilter(ServletFilterChain.java:106) at*
*com.caucho.filters.CmsGzipFilter.doFilter(CmsGzipFilter.java:177) at*
*com.caucho.server.dispatch.FilterFilterChain.doFilter(FilterFilterChain.java:70) at*
*shared.filter.RemoteAddrFilterBase.doFilter(RemoteAddrFilterBase.java:57) at*
*com.caucho.server.dispatch.FilterFilterChain.doFilter(FilterFilterChain.java:70) at*
*com.caucho.server.webapp.DispatchFilterChain.doFilter(DispatchFilterChain.java:115) at*
*com.caucho.server.dispatch.ServletInvocation.service(ServletInvocation.java:229) at*
*com.caucho.server.webapp.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:277) at*
*com.caucho.server.webapp.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:106) at*
*com.caucho.server.dispatch.ForwardFilterChain.doFilter(ForwardFilterChain.java:80) at*
*com.caucho.server.cache.CacheFilterChain.doFilter(CacheFilterChain.java:207) at*
*com.caucho.server.webapp.WebAppFilterChain.doFilter(WebAppFilterChain.java:173) at*
*com.caucho.server.dispatch.ServletInvocation.service(ServletInvocation.java:229) at*
*com.caucho.server.http.HttpRequest.handleRequest(HttpRequest.java:274) at*
*com.caucho.server.port.TcpConnection.run(TcpConnection.java:514) at*
*com.caucho.util.ThreadPool.runTasks(ThreadPool.java:520) at*
*com.caucho.util.ThreadPool.run(ThreadPool.java:442) at*
*java.lang.Thread.run(Thread.java:595)*
Thanks for your help!

My simple and stupid solution: Don't mix the two :-)
You are not meant to be able to use the JSTL1.1 functions with JSTL1.0.
What version of JSTL have you got installed on your servers?
I presume it is one of JSTL1.1 or JSTL1.2?
What jar files are present? Are they all the same version on the different servers?
What version of Resin are you using?
Are there any entries in the web.xml file for JSTL (correct answer is: no. There shouldn't have to be)
Do you have any JSTL tld files sitting around your web app (again the correct answer is: no)
Deep in the source code of the JSTL 1.1 parser, is this snippet:
String allowed = System.getProperty("javax.servlet.jsp.functions.allowed");
if (allowed == null || !allowed.equalsIgnoreCase("true"))
{if (true) throw new ParseException("EL functions are not supported.");}I'm not sure what would set this property, but it might give you a lead...
My recommendation: Use JSTL1.1 rather than JSTL1.0, and don't try to mix the two.

Cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

Have you done any of the following?
http://support.apple.com/kb/PH18614 OS X Yosemite: Reset the printing system
Repaired permissions & restarted your comp after the installations of the drivers?
Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
What to do when you can't print
=============
not working with OS X yosemite 10.10.1
Per your profile
Mac OS X (10.7.3)
Conflicting info: Please update/correct your profile so that you can receive the correct troubleshooting suggestions. This will assist the users in trying to help you. Thank you.

Downloading raw images from Canon Rebel XTi and problem with Border FX

Aperture no longer downloads raw images from my Canon 400D / Rebel Xti and installed Lexar Professional UDMA card. I am able to download images to my Dell laptop. This is a new phenomenon only occurring since about 10 days ago. I am currently able to download images from my Canon 5D.
Also, my computer has locked up 4 times today when I have been starting Border FX. I have seen a screen saying that I have to restart my computer by holding down the on button. I have the most recent version of the Border FX software.
Any suggestions please?

Join the crowd! I just started to experience exactly the same thing on both of my systems. Apparently the latest raw camera drivers broke something related to Canon Rebel cameras. I'm using the Rebel XT.
I tried a quick experiment the other day. I shot a bunch of test photos forcing the camera to store them as JPEGs. I was able to download those without a problem. I then forced the camera back to raw mode and shot a few more pictures on the same memory card. The JPEGs that I was able to download previously no longer will download and neither will the raw files.
I tried reverting to the older camera raw driver on my notebook but for some reason it won't let me do that. I haven't tried reverting on the desktop yet.
Hopefully this problem is fixed quickly. I've got a ton of pictures from a recent vacation I'd like to off load.
By the way, this affects the iPhoto, Aperture and Image Capture apps.

Mixed Canon XL-H1A and HV30 capture - correct workflow?

Similar Messages

Maybe you are looking for