Mixed-family problem

My husband uses a Windows 7 laptop and a digital projector to do still slideshows on the dive boats we frequent. This would also be the best way to show my HD underwater videos to other divers.
His PC will connect (via 400 FW) to my Mac-formatted G-raid mini, where the videos are stored as stand-alone QT movies, but it doesn't recognize or mount the drive. We think this is an incompatible-format issue, and that there may be software that would get around it. Any suggestions?
I know this probably belongs on some other Mac (or Windows?) forum, but you guys know everything!
Thanks,
Sharron

I've looked at converting the videos to h.264 both ways. QT Pro seems to offer only small-format options. Since this is a projector presentation onto about a 4' x 5' screen, I think I'd rather use the 1440 x1080 format, the native output of my Sony HDR/HC7 & 9. I may be missing some fundamental point, but it seems like that would give me the best image quality I can get.
I could probably do a conversion (via QT) on FCE's Export menu, to get a large-format h.264 video, but I think it would take a lot of time to do all the processing and I might have to do some experimenting to get all the settings right again.
My best bet might be to bring my Mac-formatted drive, its FW cables and the DVI-VGA connector along on the next dive trip, and hope for a Mac user to let me hook up to the projector. There are usually a few Macs on the boat...
Thanks for your help, David!
SS

Similar Messages

Audio mixer volume problem

I'm working with CS3. My timeline has two audio tracks. Track one is the clip verbal audio, that track is fine. Track 2 is the music that I want to fade in and out at certain chapter intervals. After adjusting all the volumes in track 2, when I go back to listen to the final product, my volume adjuster button keeps popping back to the bottom, no volume. When I did the adjusting I did it in "write" and then immediately saved it, but it keeps going down on its own. There must be a simple solution.

I've always had this problem in Premiere 6.5 too. I simply refuse to use the goofy audio mixer. I either do everything with envelopes, or if it's something much more complex I'll export to Audition and make my changes there.

Multipart/mixed mime problems with mail

So from what I've gathered Mail has problems with multipart/mixed mime type emails.
I wrote a PHP script that sends customers their orders as a PDF attachment as well as the order processing department.
If Mail doesn't support multipart/mime what is the alternative to use in my mime type to make my emails work?
Is there another content type that I should be using?

john,
how did u solve this?
I'm doing byte by byte comparision of incoming response stream to construct different parts.....i'm wondering if there is any more effecient method..
Thanks,

Mixer assignments problem with Reason

We have Reason 4 wired into Logic 8.02 via rewire as many separate tracks but when we installed Groove Agent 3 the track input assignments all changed and some of Groove Agents had taken over. This can all be re-assigned manually (time consuming..) but then the same problem happened again when trying to use the file on other computers. Disabling Groove Agent in the audio units preferences did not help and even when loading files that have no use of Groove Agent the assignments are wrong.
Installing Novation's Automap for their Remote keyboards also caused a similar problem. When you look at the input assignment menu on a mixer track you can see that Groove Agent and Novation's Automap now have menus of selections that have installed themselves above the Reason assignments menu.
What's going on? We can't keep on reassigning all these inputs all the time, they should remember what they were set on and keep those settings surely? Puzzled...

OK incase any kind soul was about to try and come to my aid, I've worked around the problem by duplicating all the affected tracks, re-assigning the new tracks back to the reason instruments they originally corresponded to (deleting the automation in the process) and then moving the original midi info and automation across to the new tracks. Still puzzled as to why this happened in the first place. Any light that can be shed would be appreciated.
Ta

Dual layer mixed-angle problems

I'm working on a dual layer mixed-angle project. Everything simulates fine, but the problem somes when trying to build it.
I get a "video bit rate too high" error when muxing. I had lowered the max bit rate in compressor to 5.8m The audio is encoded to AC3 using compressor.
I had previously done some test discs for my client and everything was fine. So I went back to the check disc and began adding assets one at a time to try and figure out where the problem is.
Every built fine until I cross the single layer limit. The dual layer property is checked in the disk properties. I've tried setting last marker before the disc won't build to a layer break point, etc.
Any ideas?

Hi there, are you far over the limit for single layer disc? If you're between 5 & 6 gig try building the disc as a single layer project to your hard drive then use DVDRemaster or DVD2One to shrink it back to 4.4gig. Don't know if it will work but might be worth a try. Was your original client test done in DVDSP3 or 4?
Cheers
B

WAP4410N WPA2 Enterprise Mixed authentication problem against Cisco ACS 4.2

We have 3 x WAP4410N at new office setup in Singapore.
Customer asked us to setup those 3 AP to make client auth against an ACS 4.2 sitting in US office.
All the user notebooks were joined to Windows domain in US office, before sent out to Singapore office.
We configured APs with WPA2 Enterprise Mixed mode and entered radius server address and secrects correctly.
Logging from ACS shows that users are authenticated successfully but, on the user notebooks, authentication never seems successful and keeps authenticating.
We have tried with other option (RADIUS) but, problem persists.
Please help.

Hi Robert,
Firmware version is 2.0.4.2.
We have tested with WPA-personal, WPA2-personal and all worked.
For enterprise, we have tested using WPA-ent, WPA2-ent, WPA2-ent-mixed and RADIUS.
All did not work.
Client keeps flapping between auth and validation.
ACS logs showed that auth OK.
Syslog from AP showed that client was assiciated but it happened repeatedly.
<134>Oct 28 16:13:27 MVIS-SG-AP01 kernel: [sg-internal][A0:88:B4:40:41:D4] Open Authentication    10.200.4.12    28/10 16:13:28.720
<134>Oct 28 16:13:27 MVIS-SG-AP01 kernel: [sg-internal][A0:88:B4:40:41:D4] Associated    10.200.4.12    28/10 16:13:28.720
<134>Oct 28 16:13:29 MVIS-SG-AP01 kernel: [][A0:88:B4:40:41:D4] SUBTYPE_AUTH    10.200.4.12    28/10 16:13:30.720
<134>Oct 28 16:13:29 MVIS-SG-AP01 kernel: [sg-internal][A0:88:B4:40:41:D4] Open Authentication    10.200.4.12    28/10 16:13:30.720
<134>Oct 28 16:13:29 MVIS-SG-AP01 kernel: [sg-internal][A0:88:B4:40:41:D4] Associated    10.200.4.12    28/10 16:13:30.736
<134>Oct 28 16:13:31 MVIS-SG-AP01 kernel: [][A0:88:B4:40:41:D4] SUBTYPE_AUTH    10.200.4.12    28/10 16:13:32.689
Below is the diagram for your kind ref.
      US Office          Site-to-Site VPN    SG Office
ACS --- ASA ------------ Internet ------------ ASA5505 ------ 2960 PoE SW ----- 3 x WAP4410N
                                                                                                   \ \___ DNS/DHCP Server
                                                                                                    \____ Wired Clients
Note: SG office ASA is 5505 and outside interface is on Vlan 2, inside interface is on Vlan 1. 2960 switch is configured with all ports in Vlan 2. Vlan feature on WAP4410N is disabled. Layer3 communication among US office ACS, SG office ASA5505, DHCP server and WAP4410N is fine. All wired clients in SG office get IP from DHCP server. I feel this is a bit odd and you may need to know.
Do feel free to let me know, should you need further input from me. Thanks!

Liquid Mix Install Problems

Its late and Focusrite Support is closed. I've installed the software, downloaded the updates and installed them. I can't get my mac to recognize my Liquid Mix. using Logic Pro 7, G5 DP 2.0, presonus Firepod and Mackie Control.
Any ideas?

Here are my notes/issues:
Day One
I am pulling my hair out. I've been tying to get the Liquid Mix working for over 4 hours now. I can't even get logic to recognize it at boot up. Doesnt see the AU plugins. Garage Band shows it, but give me the beach ball of death when I try to select it. I get LM-runtime v0.3.1 on the LCD of the controller and nothing else. I've downloaded and installed updates from Focusrite.
I've got a G5 Dp 2.0 with Logic Pro.
Day 2
I am completley bewildered. I still can't get it to run. Finally found some support from CA. This is what she had me do.
1. Uninstall Liquid Mix
If you would like to remove all Liquid Mix software from your Mac, please remove the following files and directories from your system:
Liquid Mix Application:
- Applications/LiquidMix (Application)
Liquid Mix Emulations:
- Library/Application Support/LiquidMix (entire directory)
Liquid Mix Snapshots:
- Users/'username'/Library/Application Support/LiquidMix (entire directory)
Liquid Mix VST Plugins:
- Library/Audio/Plug-Ins/VST/LiquidMixMono.vst
- Library/Audio/Plug-Ins/VST/LiquidMixStereo.vst
Liquid Mix AudioUnit Plugins (if installed):
- Library/Audio/Plug-Ins/Components/LiquidMixMono.component
- Library/Audio/Plug-Ins/Components/LiquidMixStereo.component
Liquid Mix RTAS Plugins (if installed):
- Library/Application Support/Digidesign/Plugins/VW_LiquidMixMono.vst
- Library/Application Support/Digidesign/Plugins/VW_LiquidMixStereo.vst
Spot light to find any left over files
Delete all - empty trash
2. New Installation
From original disk install the following emulations only:
44
88
192
Install liquid mix software from down loaded file and not from disk
3. Logic Verification
Launch Logic
Got to:
Preferences
Start Logic Audio Unit Manager
Check Status of Liquid Mix
If not validated, then tell it to scan.
Well did all that, no avail. Logic wil not validate the plugs.
Next, installed it on my daughters Intel Imac, no problems. Worked immediately.
I don't know what to do, return it? I've spent so much time on this thing so far and am very frustrated.
I'm running Logic 7.2.2. By the way, even after I uninstall the app. I still never starts from scratch. When I go to install again, it gives me upgrade option only. This is strange as well. Any ideas, I'm out of luck until Monday.
Logic Pro 7.2.2
Presonus Firepod
Mackie Universal Control
UA 610 Solo
Apple G5 DP 2.0
160Gig System
1.5gig RAM
Carvin, Les Paul, Strat Guitars
Carvin Amp and POD XT
Alesis Monitors and Pwr Amp

Mix Radio Problems

When i open Nokia Music, i can't find mix radio & xX box music store there.
Please help me out...

Same problem here, it was working then just suddenly they disappeared. Annoying

Solution to Arial Narrow family problem 4 fonts

I finally found an old disc that I had copied my fonts folder in 1998. I deleted all Arial Narrow fonts, and copied the 4 old fonts dated 1998 Arial Narrow family to the fonts folder (having deleted the newer Arial Narrow fonts first). I never expected to need that disc - I was in the process of destroying all my old art files. Thankfully the fonts were still on one of them.
The problem apparently has to do with Office 2007 and the way it has replace the Arial Narrow font family, not Adobe.
PS I had tried the hotfix from Microsoft meantioned elsewhere, but it made no difference. Using the old fonts did make a difference.

I have the same problem and the fix won't work here either. Care to make these old fonts public?

Complex Element with Mixed Content problem!!!!1

Hi All,
I have a scenario where complex XSD element has mixed content.i.e it has text and elements. How to deal with it in XI.When i create any complex type in XI i cannot add text to it,i will be able to add only elements enclosed by that complex node. Any ideas on how to get across in Graphical Mapping.
Regards,
Sudharshan.
Message was edited by: Sudharshan Aravamudan

Hi Sudharshan,
I dont think it is possible to create such elements in XI. As far as i know a complex element can only contain more nodes of varying occurences, but not some information of it self.
Just check out these links,
http://help.sap.com/saphelp_nw04/helpdata/en/3b/d2a3f7a166514abb8cf5635b71974f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2d/c7d9b2d9f138439482a8fafb91f047/content.htm
I guess the format you are trying to create is actaually something that XI doesnt support.
Do let me know if you got further queries,
hope this helps,
regards,
Bhavesh

Small caps in running heads - mixed case problem

My running head is set to be small caps, and it picks up mixed-case text from the document. I want the head to be all 'lower case' small caps (or 'upper case', unless that really means ordinary caps) but can see no way to achieve this. Instead I get 'mixed case' small caps, if that makes any sense. If I select the head on the master page and then Type | Change Case, this has no effect on the appearance either on the master or the generated heads. How do I achieve uniform small caps where the source text for the running head is mixed-case? If small .indd attachments were allowed I would have attached one, but it got rejected despite not being llisted as a forbidden type.

A few ways to do this:
a script: http://jsid.blogspot.com/2005/09/script-of-day-changing-case-again.html
or in your paragraph styles use OT small caps (assuming you're using an OT font)
I also set up a keyboard shortcut, to Type > Change Case > lowercase
you could probably do it with GREP too...

Anyone have Weblogic Server 5.1 and Firewall-1 mix authentication problems?

We have a Weblogic Server 5.1 instance running behind Firewall-1 from
Checkpoint. When an external client tries to connect, the following
happens:
1. an authentication dialog box from Firewall-1 pops up and once it
authenticates the user, then
2. ANOTHER authenticatino dialog box pops up from WLS but it says it is a
combo of both WLS and Firewall-1???
Bizzarre!
Ideally, Just one popup should occur or people should be able to athenticate
once in FW1 and then secondly in ONLY WLS realm (not some hybrid)
Any ideas / suggestions
Bart Jenkins, CTO, Globeflow SA
Madrid Spain

Bart,
Could you please provide more details? For example, what is it that makes
you believe that it is a combo?
I ask because there is no integration between the two products. I would
have expected that FW-1 would
prompt because it is authenticating the user and then WLS would prompt via
basic or form-based authentication
if the resource is protected.
Paul Patrick
"Bart Jenkins" <[email protected]> wrote in message
news:3a75efb6$[email protected]..
We have a Weblogic Server 5.1 instance running behind Firewall-1 from
Checkpoint. When an external client tries to connect, the following
happens:
1. an authentication dialog box from Firewall-1 pops up and once it
authenticates the user, then
2. ANOTHER authenticatino dialog box pops up from WLS but it says it is a
combo of both WLS and Firewall-1???
Bizzarre!
Ideally, Just one popup should occur or people should be able toathenticate
once in FW1 and then secondly in ONLY WLS realm (not some hybrid)
Any ideas / suggestions
Bart Jenkins, CTO, Globeflow SA
Madrid Spain

{Mix Radio} problem in registering my phone for un...

Hi

You're in India and talking about hte Unlimited service, right? Simple answer: When you first used the Unlimited service, your phones inbuilt licence for the service was linked to your Nokia Account. In order to continue using the service with that phone, you MUST use the same Nokia Account that you used originally, you cannot use a new one.

Problem On Windows-XP of Swing App

The problem of the Heavy-weight Swing appication in the following Operating environment -
Operating System : Microsoft Windows XP [Version 5.1.2600]
Processor : Intel Pentium-4 2.20 GHz
RAM : 256 MB
Graphics Adapter : RADEON IGP 340M / Intel 82845
Java Runtime Environment -( java.exe )
java version "1.4.0"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.0-b92)
Java HotSpot(TM) Client VM (build 1.4.0-b92, mixed mode)
Problem -
It takes more than 25 minutes to load. After loading it shows the white screen.
As we move the cursor over the screen the GUI components under the cursor are displayed.
When the user interacts with the application e.g. by clicking the button.
again more than 1 minute is spent the OS in the response
At the startup , program constructs 13 objects. Each object is one JPanel.
Each JPanel again contain one JTabbadPane containing 5 tabs.
Each tab contain 2-3 Jpanels.
In these JPanels there are lots of Swing GUI components.
For each constructor of the object 1-2 minutes are required.
Overall time to load the complete program is 25 minutes.
During these 25 minutes CPU usage is 100 %
All other activities are stopped
The Solutions we have tried.
1. downloaded the latest JRE 1.4
2. used various JVM options ( command line arguments to java.exe )
-Xmx -Xms
-XX:+AggressiveHeap
-Dsun.java2d.3d=false
-Dsun.java2d.ddoffscreen=false
-Dsun.java2d.noddraw=true
2. created the executable jar file
3. analyzed and compared the System properties, Graphics Environment properties
for Windows 98 and Windows -XP
4. downloaded the latest update for windows-xp's driver and
MS JVM( java virtual machine)
5. tried the jre.exe 's options
6. sets various options of UIManager
On Windows 98 SE it takes less than 9 seconds to load that program.

Hi,
On the Windows XP machine, are you running a virus checker,
(like Sophos?), that tries to verify the runtime jar files and
each class file as it's loaded?
--Steve

N8 Headset or 3.5mm port problem???

Hey guys,
I got some problem with my N8, when I am trying to plug in 3.5mm jack to my phone there is no option to choose hedset, headphones, TV-OUT or music stand. and music is coming from loudspeaker. So i am thinking that phone do not recognize any hedset pluged in. Everything works fine when i plug in regular earphones without any microphone.
so anyone got familier problem or jus only me? Thank you for your advise ))

Goto Menu Settings Phone Accessories and set Headphones as default.
It has alteady been speculated on other threads that you should push in the jack as fast and hard as possible.
Cheers.
Ray

Mixed-family problem

Similar Messages

Maybe you are looking for