Mixed MRP Indicator
Hi ,
Can any one explain me the use of Mixed MRP indicator in MRP view of material master. What is the use of this and when we need to activate this. Thx in advance
Hi,
Mixed MRP indicator is used mainly in case when Gross Requirement Planning is used i.e. when you have requirement of not considering plant / stor locn stock in MRP run then you need to use strategy group 11 Gross requirement planning along with Mixed MRP Indicator as
2 Gross requirements planning
Regards,
Tejas
Similar Messages
-
Mixed MRP indicator 1 for PIR consumption of STO
I am aware that Mixed MRP indicator is used in planning strategies 70, 11 and 74.
could some one please help me understand the rationale behind using mixed mrp indicator 1 for consuming PIR by Stock transfer documents using BADI MD_PIR_FLEX_CONS
http://wiki.sdn.sap.com/wiki/display/ERPLO/PIRconsumptionwithStockTransport+DocumentsQuestion is
what is the technical reason behind using mixed mrp setting in material master for consuming pir with STO using badi dm_pir_flex_cons. I do not see how they are related?? -
Hello,
What is the function of the mixed MRP indicator. The help text does not say much excpet that its used with certain planning strategies ?
Also what is the difference between the dleivery types LR and RL ?
ThanksThis indicator is used to conclude whether the material is available for any one type of planning.
In Mixed MRP itself you can assign 3 different values
1 Subassembly planning with final assembly
2 Gross requirements planning
3 Subassembly planning without final assembly
In this value 1 is set for strategy 70 - Planning at assembly level.
value 2 is set for strategy 11 - Gross requirements planning
value 3 is set for strategy 74- Planning w/o Final Assembly at Assembly Level.
And for strategy 89- Assembly Processing w/ Char. Planning value 1 will be set -
Hi All,
What is the importance of MIXED MRP indicator in production Order/Planned Order scheduling or in MRP Run?...........pl revert
Best Regards
SharadHi,
Defines whether the material is available for:
1) Subassembly planning with final assembly
2) Gross requirements planning
3) Subassembly planning without final assembly
The purpose of Mixed MRP is to calculate the Gross Requirements Planning for Planned order in the MRP run.
pls let me know any clarification, pls reward the points.
Regards,
Mohan R -
What is Mixed MRP indicator.. What is the effect of Mix MRP in SAP
Dear
Defines whether the material is available for:
1) Subassembly planning with final assembly
2) Gross requirements planning
3) Subassembly planning without final assembly
The purpose of Mixed MRP is to calculate the Gross Requirements Planning for Planned order in the MRP run.
Mixed MRP is used for strategy 11 Gross requirements planning,52 Subassembly planning without final assembly ,Subassembly planning with final assembly.Those strategy are perform diffrently when compare with others.For example 11 will not consider warehoue stock unlike others.MRP genearted planned order for strategy 52 can not be converted into production unless SO is available unlike other startegy.
Refer : Mixed Mrp Indicator
Hope this will help in understanding about the Mixed MRP indicator
Regards
JH -
In Material Master Screen,functionally what is Mixed MRP in the MRP Screen.
In Material Master Screen,functionally what is Mixed MRP in the MRP Screen.Pls explain its functionality
THis indicator will define whether the material is available for the following....
Subassembly planning with final assembly
Gross requirements planning
Subassembly planning without final assembly -
LTP excludes materials with MRP indicator of storage location
Hi All,
SAP Note 208017 explains the reason for LTP not taking into account the MRP
indicator of a storage location for a material. Has anyone tried a work around for this issue?
<b>We basically are looking for a snapshot of operative MRP a week back from current date</b> and I thought LTP can be used, but it plans at the plant stock level. Since we have service inventory managed at storage location level and its exculded in operative MRP, we cant have consistent results with LTP being used for my purpose.
Any inputs appreciated
ThanksHi,
1. I dont think we should use the LTP Forthe purpose of your requriement
2. Since i think you will be runing the MRP at certain frequency say daily,weekly etc
3. LTP is a strong functionality for the forward planning , which means for a medium or long term in the forward direction
4. For the purpose of snap shot we shouldnot use this ...
may be pp gurus in the forum will be giving us some reply which you are looking for
reg
dskumar -
For Dealar's Invoice MRP indicator is not appearing in J1IEX
Dear All,
We are trying to capture the the Dealar's Invoice through J1IEX,
in po Rate is maintained as per Rs 100 and VAT 4% and then GR is made for the same without captuing any excise in MIGO.
and then we are tring to capture and post this excise invoice in J1IEX but system is not showing MRP indicator to facilitate mannual entry of excise values,
and for this we have maintained all the J1ID master data.
Please suggest
VimleshDear Vimlesh,
The purpose of MRP indicator is to change the grn value, which maintion in po.
i.e if your po price is 100, then your grn valu should be (100- exicse value).
Now if you already done grn, & then you go for capture the excise in J1IEX, then purpose of MRP indicator is useless, thats why its not coming during capture w.r.t GRN.
MRP indicator is reflecting only during GRN in MIGO if you capture excise or capture excise w.r.t po in J1IEX before GRN.
Hope you got the solution -
MRP Indicator while making a GRN : Difference in GR/IR value.
Hi,
I am trying to make a GR for an imported material against a foreign PO. There is a MRP Indicator Check box in Excise Tab's Additional Input button.
The issue is that
1. When I mark the MRP Indicator ( In excise tab - Addition Input button ) then the GR/IR values are shown different after MIRO. But if we do not tick that then the values shown are correct and same as posted.
2.. When I do not mark then system prevents me from changing the Excise values ( i have created CVD already ) and keeps overwriting values with some other value each time i change and press return.
Can anyone help on what is this MRP indicator meant for & used for and what are its implications.
Thanks.hi
the MRP indicator is use in trading scenario
means ur taking goods from first stage dealer for which u will get excise values at time of GR and not at time of PO
so at time of PO u will have total value including excise and u dont know the amount of excise duty in that
check following u will get idea
This is Traders pass-on scenario.
E.g.:
Material Price = 80/-
Excise Duty = 14/- (BEDECessSECess)
Margin = 6/-
Total =100/-
VAT @3% = 3/-
Grand Total =103/-
Step 1:
Create PO with Base Price as 100/- by selecting tax code which is having VAT as 3% (Total PO value will be 103/-)
Step 2:
Post MIGO and Capture Excise Part - 1
Click on More details icon in Excise tab (header), check MRP Indicator in miscellaneous tab, Enter Assessable value as 80 in Excise tab Item level and enter the excise values BED, ECess , SECess manually, check & save the document.
Step 3;
Post Excise Part 2 in J1IEX
Step 4:
Post MIRO by checking calculate tax, edit base value as 80/- enter the amount in header as proposed by the system (103/-), simulate & post the document.
check note no 1104456 at SERVICE.SAP.COM
regards
kunal -
Reoprder point and replenisshment qty to be 0 with SLOC MRP indicator = 2
Dear PP Gurus,
I want to set in MRP4 view: SLOC MRP indicator = 2, along with reorder point = 0/ blank and replenishment = 0/blank. In MM01 and also through MMSC is gives:
Hard error with details as
"You have decided in favor of storage location MRP (2) for this material. Since separately planned storage location stocks are planned using the reorder point planning technique, a reorder point and a replenishment quantity are required."
Can the hard stop be changed to a warning message only?
Help will be appropriately rewared with points!
Thnx.Hi,
if u want to plan storage locations stock seperately( =2), u have to define reorder level and a replenishment quantity.
During a planning run, the system compares the reorder level of storage locations to be planned separately with the stock of this storage location. If available storage location stock falls below the reorder level, a receipt element is created amounting to the replenishment quantity or, if necessary, for a multiple of the replenishment quantity.
regards
pradeep -
In Depot Plant while Doing MIGO MRP indicator not found
Dear All,
We have one depot plant. for capturing of excise duty while doing MIGO
I have not found the MRP indicator check box in excise ->misc. Tab.
But for doing this same process for other manufacturing plant means non Depot plant I have found the MRP check box in excise ->misc. Tab.
Is there any process to capture the MRP check box indicator in excise ->misc. Tab while doing MIGO for Depot plant or is there any process to book excise duty while doing MIGO for Depot PlantPlease go through the Scenario #: Dealer Procurement in Excisable Depot scenario in the below link.
http://scn.sap.com/docs/DOC-45855 -
MRP Indicator check box in MIGO
Dear All,
While capturing Excise Invoice during Goods Receipt (T.Code: MIGO), in Excise Invoice tab of MIGO screen- there is a button for " More Data". After clicking that button and in the 'Miscellaneous' tab , there is a MRP Indicator check box.
Please let me know when we need to flag MRP Indicator check box.My doubt is in which scenario, we need to flag that check box.
Regards,
PhaniDear Piyush,
Tnx for ur solution.
Scenario-1: MIGO done & MIRO not done:
MRP indicator flagged:
In this case, the value of the material will be the Basic material price minus the Excise duty amount. ( For eg: material base value =Rs. 1000; BED= Rs. 160, E. cess=32 & SHE cess= 16). The total valuated stock will be Rs.792.
MRP indicator NOT flagged:
In this case, the value of the material will be the Basic material price.( For eg: material base value =Rs. 1000; BED= Rs. 160, E. cess=32 & SHE cess= 16). The total valuated stock will be Rs.1000.
Scenario-2: MIGO done & MIRO done:
MRP indicator flagged:
In this case, the value of the material will be the Basic material price. ( For eg: material base value =Rs. 1000; BED= Rs. 160, E. cess=32 & SHE cess= 16). The total valuated stock will be Rs.1000. (the ED amount of (1603216) will be debited to material value while doing MIRO poting.
MRP indicator NOT flagged:
In this case, the value of the material will be the Basic material price.( For eg: material base value =Rs. 1000; BED= Rs. 160, E. cess=32 & SHE cess= 16). The total valuated stock will be Rs.1000.(Rs. 1000/- debited to material account while doing MIGO itself) .
Concludingly, I want to know in what scenario we will flag the MRP Indicator. Please note that I am aware of the trading scenario also.
Regards,
Phani -
MRP indicator in Goods Receipt
Hi All,
MRP indicator when we post the Goods Receipt for excise material.
And when we ticked the MRP indicator tab then your GR/IR amount is not equivalent to po net price.
So I need that MRP indicator should be GREY out for plant secific, so that no one can ticked that MRP indactor.
Is it possible to grey out the MRP indicator for plant specific or comapny code specific.
Thanks..
TruptiHi,
Ask your Basis Person,you can control through only authorization level of that perticular plannt.you have to tell the object of the MRP indicator. -
'Storage location MRP indicator'
hi;
what is the table name for fetching 'Storage location MRP indicator' specified with material number and storage location
thanks in advanceHi,
See Table MARD there is field DISKZ - Storage location MRP indicator
This table contains MATNR-Material Number as Well AS LGORT-Storage location field.
Regards,
Sachin -
Exicise Duty Issue In MRP Indicator
Hi Expert,
My client is calcualting VAT on PO bas value. My PO bas value is 540960.
But he change the base value in MIGO as below and entered the Manually BED, ECS, SCESS. while tick mark in MRP Indicator.
Base value in MIGO:--440160
BED:--44016
ECS:-880.32
SECSS:- 440.16.
How i am calcualting vat on PO base value + MIGO BEDECSCESS.
The VAT is 4%.
Please help me
Regardsgawas11 wrote:
> System calculating VAT on GRN value. I want to calculate on PO base Value. Is it possible to some way?
>
Hi,
Here lets try to figure out why system is behaving like this
If you read SAP note 1104456 - Use of MRP indicator for capturing excise duties from dealer
It clearly says
This MRP indicator checkbox must be ticked and then the excse base value and the
excise duty values can be changed. Please note - the sum of the excise base and the
excise duty values must always equal to the PO price. This is because in this step,
the PO price is being divided into two components - the excise base value and the
excise duty value
The goods valuation will change accordingly. The material account will be debited with
the excise base amount and not the total PO price amount.
So PO net value and (Excise base amount + BED +Ecess +S & H cess ) should be equal and then there will also not be any issue on calculation of VAT as these two are same
Edited by: redriver on Feb 16, 2012 1:15 PM
Maybe you are looking for
-
Can I revert to an older version? I tried all your published trouble shooting procedures to no avail to get Firefox 4 to open. When I try to run it, there is a process running in the Task Manager but no task or program actually opens. I never had any
-
HD Audio not working on Macbook Pro via Windows 8
I've tried nearly everything to get the driver working, Windows states that the best driver is in use. http://i.imgur.com/FmQtV.jpg Here is a screen shot of the device manager. I've tried realtek hd drivers, Cirrus drivers, enableing, disabling the d
-
ITunes keeps opening by itself and playing music.
My iTunes keeps randomly opening up by itself and playing music. When it happens, I quit the app and it stops for the day, but it will happen again randomly. Like days or weeks later. I don't know why my computer has decided to start doing this recen
-
Error Signal Whenever I Try to Access a Particular On-line Site
I regularly visit a site to get news reports and it has worked fine for me until recently. I get regular email notices of news items and when I try to use the links given in the emails I now get the following error message whenever I try to access th
-
Send Attachment Files Of MM03 via email
Dear Experts, I have requirement of send Attachment files of MM03 transaction Via Email. Example. Go to TCODE MM03. Select Views: Basic Data1 and Basic Data 2. Click on GOS (Generic Object Services) where you find Attachment List. I want to send tha