Mixed up order/Grey photos/error message during download from camera

Hi all..I have been searching for the answer to this but have only seen the same problem when uploading from iPhone. I have had no problem in the past downloading the last 4200 pictures or so from my Canon Rebel XT, but yesterday all of a sudden I get GREY pictures (some not all), and out of order numbered images (some). This was accompanied by the error "private/var/tmp/folders/501/Temporaryitems/iPhoto/IMG_5504.JpG. . ." + four more Jpg #'s, though more than that were affected. When I click on the Grey picture (solid grey, not grey with question mark), it appears that the full MB and details of pic are there, I just can't see it. Pictures are on camera fine. Never had the number go out of order, and just this last download are affected. Any suggestions??

Thanks Terrence - I tried that and some imported (I think the camera battery died part way), so I tried to open some under Preview. The thumbnail was fine, it had the image,(and it reflected the larger GB that it should have been, so it wasn't just a small "thumbnail" file) but it still "opened" as grey. Very strange. Could it be a corrupt camera card or do you think it's an iPhoto/computer issue?

Similar Messages

Error message when downloading from Google Play Store

After recently doing the toshiba system update for my AT300-32gb tablet I now get the following error message when downloading free apps from Google Play Store -Error processing purchase {DF-BPA-13].
Automatic update for downloaded apps no longer works either. Anyone have a solution to this?

Go into your settings and touch "apps" on the left. Then touch "Google Play services" and tap "Clear data" and "Clear cache." Then touch "Apps" again on the left. Now do the same for the "Google Play Store" entry. Then hold down the power button until it asks if you want to turn it off. Go ahead and turn off the tablet. Then turn it back on and try again.
- Peter

Error message during download of ITunes

It tells me that there's an error during the instalation and that I should try again but the error message just occurs again. I've tried multiple times to download this and it should work as I have a brand new Windows 8 Toshiba laptop. Any ideas?

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

ERROR MESSAGE DURING DOWNLOAD

Hi Gurus,
I am trying to download MATERIAL from R/3 to SRM using the transaction 'R3AS'.
But the download does not happen
I end up getting the following error message in transaction
SMW01.
BDOC STATE IS F05
BDOC STATE DESCRIPTION Information (No Processing).
and in the details i see the below message
Mat. for Initial Download: Table not supported by function
Message no. C_014
please help me resolve this issue.

hi gurus,
some materials are downloaded
and for most of the materials , i get the message as described above.
can somebody help me , what more customizing i need to do for download to happen correctly.

Error Messages during downloading of Photoshop

I continue to get error message 1935 whenI try to download myphotoshop order

This should help. http://helpx.adobe.com/creative-suite/kb/error-1935-assembly-component-microsoft.html

Error Message with Downloads from Software Update

Today I ran Software Update, and downloaded these two updates: one that applies to printers & scanners, and one that is an update to iTunes. After completion, each download gave the same error message as follows:
The system extension "/System/Library/Extensions/SymOSXKernelUtilities.kext" was installed improperly and cannot be used.
How do I correct this error?

That error typically only occurs when the computer has been restarted, although that's not universally the case. What I would try is navigating to /System/Library/Extensions/ and deleting the reference .kext file (you need to CTRL- or RIGHT-click on the file then choose Move to Trash from the contextual menu. You will be prompted for your admin password.)
I would then go to support.apple.com/downloads/ and download the updates in question and install them manually.

Why am i getting error message when downloading from app store

I am trying to download apps and updates for apps I have,and am getting an error message?

Sharonc21 wrote:
If one is downloading directly to the iPhone via WiFi, it doesn't matter what version of iTunes is on the computer.
I decided to sync my phone to Outlook via iTunes. First thing, iTunes discovered that 7.0.3 was not on my phone. It asked if i wanted to install it. I said, "yes", and VOILA!! 7.0.3 is now installed on my iPhone.
So therein is the answer. Have no idea what bug is in there to keep it from loading to some phones directly via WiFi, but obviously, it is something!!
There is no bug. While you can update your iOS via wi-fi, it's recommended to do so via USB & iTunes. Depending on your wi-fi connection & singal strength, you can get errors. That's not a function specifically of the device.

Error message when downloading from Panasonic D100B

I was trying to download video from my Panasonic D100B camera using Final Cut Express for first time. It seemed to download correctly but then an error message popped up saying "Connected device does not support the number of audio channels required to capture one or more of selected clips. Try disabling the Used Logged Clip settings option in the Batch capture dialog or modify the capture settings of your clips by chosing clip settings from the mmodify menu".
Does anyone have any idea why this is happening?

The files are not going to work with FCE directly.
You might want to try converting them first using something like Streamclip.
http://www.squared5.com/
In Streamclip make sure it's a QuickTime file conversion that matches one of the FCE Easy Setups, audio and video settings.
Al

"iTunes has stopped working" error message during syncing

I've downloaded the latest version of iTunes, and just started to download Podcasts. But now I get the error message during syncing....almost everytime. Is there a solution out there or update that I haven't downloaded??

Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

Icloud photo library won't work unless connected to wifi. If I am trying to attach a pic to a message or email, I get the error "photo can't be downloaded from iphoto library, please try later." If I connect to wifi it works just fine.

If I am trying to attach a pic to a message or email, I get the error "photo can't be downloaded from icloud photo library, please try later." If I connect to wifi it works just fine. If it's truly "storing" a low res version on my phone it shouldn't have to download anything. I can understand the uploading of pics to library only being done over wifi, but there are plenty of times I'm going to want to send a pic when I'm not going to be near a network. It does work occasionally, but the norm is that I get the error.

Hi Ed,
There is issue with Windows 7 when you send the email. It gives the message you specified.
But you can always use Adobe Email client to send your images. In this workflow also you would get the error message but you can ignore it and continue to send the mail.
Thanks,
Sourabh

Error Message During Vista Install W/ Bootcamp

I crashed my original vista installation, so I am trying to get it up and running again. After deleting the old partition and creating a new one with BCA in Leopard, I get this error message during vista installation
Windows cannot install required files. The file does not exist. Make sure all files required for installation are available, and then restart installation. Error Code: 0x80070005
I thought maybe it was My Vista DVD, so I borrowed a friends, and it did the same thing. This is on a Macbook PRO purchased a little over a month ago.
Please HELP! I need my vista installation up and running for work!

"but when detecting hard drives, nothing shows up in the list."
I don't really understand that statement as without any drives showing up how were you able to even start the install?
At any rate, during your first installment, the one that succeded, do you remember which partition it was that you Formated with the windows installer? When you use Boot Camp to partition and install the windows os, BC sets the volume name to BOOTCAMP. As far as I know this is the one that you must use for your windows os. Before you can install windows though, you must use the windows installer to format it to NTFS <----- the format type depends on a at least a few conditions, the one that I can remember is partition size. I believe 32G and above it HAS to be NTFS. But my point is, if you try and use any other partition that might come up on your list besides the one that BC made for you, it will probably error out (if you even get anywhere at all with it). Do you know FOR SURE that you chose the correct partition to format? This is the only other possibility that I can come up with at the present time.

Error message during cube creation

Hi expert,
System show the following error message during cube creation, please info how to solve this problem. Thanks.
Define the characteristics of the validity table for non-cumulatives
Message no. R7846
Diagnosis
The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube).
Besides the most detailed time characteristic, additional characteristics for the InfoCube can be included in the validity table:
Examples of such characteristics are:
A "plan/actual" indicator, if differing time references exist for plan and actual values (actual values for the current fiscal year, plan values already for the next fiscal year),
the characteristic "plant", if the non-cumulative values are reported per plant, and it can occur that a plant already exists for plant A for a particular time period, but not yet for plant B.
Procedure
Define all additional characteristics that should be contained in the validity table by selecting the characteristics.
In the example above, the characteristics "plan/actual" and "plant" must be selected.
The system automatically generates the validity table according to the definition made. This table is automatically updated when data is loaded.

Hi,
Go to the Extras Tab in the definition of the Cube and there select " Maintain Non-Cumulatives" and there select the Plant check box. You can also check Material but it is not recommended. Now try to activate the cube. I think it will work for you.

Error message during install

Anyone have a clue what to do? Keep receiving error message during install. Have disable firewall, no help. Here is the error message:
Error Microsoft.VC80.CRT.type="win32".version="8.0.50727.4053".publicKeyToken="1fc8b3 b9a1e18e3b".processorArchitecture="amd64".
HRESULT:0x8007054f
I uninstalled because Itunes would not upgrade. Now I can't install. I was able to install an older version, but couldn't access my music because it was an older version, so I uninstalled that and now have nothing. I would appreciate any help.
Thank you.

Glad to read that renaming trick helped to get iTunes installed for you. Your thread here is fine for more questions.
Search your hard drive for your music - it should still be there, but perhaps this fresh install of iTunes just isn't seeing it.
Find music: http://support.apple.com/kb/TS1408
You absolutely do NOT want to sync your iPhone with an empty iTunes library. It will erase everything. Apple only gives you one download and you need to make backups. I hope it is still on your PC! But at least you have it on your iPhone.
I don't think you synced your iPhone with your father's iTunes, or his music would be on it. Have a look in a folder named Previous iTunes Libraries. There might be an iTunes database ITL file in there that you can use.
They have names like "iTunes Library 2009-04-06.itl" which would be from April 6th, 2009.
Press and hold the shift key while starting iTunes, and when prompted, choose the most recent previous library. Does it show most of your music, and can you play some songs in iTunes OK?

Error message during processing in BI

1.i am loading the data into infoobject.
2.got error in text data load.
3.master info object have compound obj 0COUNTRY
4.and other normal fields are 0TXTSH,0LANGU,sold-to-party.
5.there is no PSA in this..its direct update to INFOobject.
The error message is:
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update
Diagnosis
There are duplicates of the data record 2. with the key '3.' for characteristic 1..
Procedure
If this message appears during a data load, maintain the attribute in the PSA maintenance screens. If this message appears in the master data maintenance screens, leave the transaction and call it again. This allows you to maintain your master data.

Hi KP,
In the details tab,
1.under Transfer (IDOC and Trfc):
   Data Package 1 : arrived in BW ; Processing : Error records written to application log
2.Processing (data packet): Errors occurred
   Update ( 0 new / 0 changed ) : Errors occurred
   Error records written to application log
   0TRZONE : Data record 1 ('0000000001D ') : Duplicate data record
   0TRZONE : Data record 2 ('0000000002D ') : Duplicate data record
   Error 4 in the update
3. Process chain error
these are the error details.

Mixed up order/Grey photos/error message during download from camera

Similar Messages

Maybe you are looking for