Mixing 4:3 and 16:9 Aspect Assets

Hi,
I have made minimal use of iMovie 08 or 09, as I typically edit in FCP. Yesterday I decided to test iMovie 09's reaction to importing clips where one is 4:3 DV and two others are 16:9 aspect SD clips that originated from a Sony SD camcorder, downloaded to a PC as a muxed file but now on my Mac and demuxed. I was curious to see how the two different aspects were dealt with by iMovie 09.
The result seems to be that rather than pillarboxing the 4:3 material, it was cropped (not stretched -- good) at the top and bottom to fit a 16:9 display. Is this normal behavior -- is there a preference setting for this.
Just curious.
Ernie

I have a similar problem with exporting recorded movie in screenium exported as a quicktime movie. on importing to imovie 09, the video is cropped at the sides. having resized the quicktime to export again as 1280 720hd and preserving aspect ratio in letter box, the exported movie comes out cropped when imported into imovie 09.
any help would be greatly appreciated. it takes so long to try each adjustment....

Similar Messages

Password Policy - Mixed servers 2003 and 2008

I Need help!!!!
So this is my situation. I'm trying to enforce a Company Wide Password Policy via GPO but running into problems. We have no current Password Policy in place (This is the only one). I'm attempting to use the default global policy in Server 2008 and I'm
testing the GPO on a specific security group, but does not seem to work. It will prompt to change the password, but the other requirements aren't being enforced.
This is what I'm trying to enforce.
Expire after: 90 days
Complexity: Enabled
Cant reuse last: 12 password
Lockout time: 15 minutes
Lock out after: 5 attempts
Minimum of :8 characters
Infrastructure: We have a mix of 2003 and 2008 servers. I'm using our 2008 server to enforce the GPO.
Once I apply the GPO to a specific security group, it will prompt to change the password for the users in that group, but will not enforce all the other policies. This is a major project and we cant deploy this policy all at once (Helpdesk wouldn't
be able to handle the call volume) so we decided to deploy it by departments/Security groups. We also tried
We also tried using a fine-grained password policy but just like the GPO, it was only enforcing the password change aspect and not the other requirements like a minimum of 8 characters. Can any help!!!!

> What if I apply the GPO on the domain root level, and then in the
> delegation tab, exclude certain groups until we are ready for it to
> apply to that department? Will hat work?
No. Read again - in 2003, there is ONE password policy for the DOMAIN,
not for individual accounts.
Technically this works the following way: Password policies are picked
up by every member computer. But on these, password policies only apply
to LOCAL accounts, not to domain accounts.
On the other hand, there are Domain Controllers. The PDC emulator is the
only one of these that will pick up Password policies - and only if they
are linked to the domain. And so, these apply to all "local" accounts on
the PDC, which in fact are the domain accounts.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Is there a way to "mix" the nodes and leaves of the tree so if they are at the same level, they will display in a specified order.

Is there a way to "mix" the nodes and leaves of the tree so that even if they are at the same level (1,2,3...), they will display in a specified order (via sort sequence, alphabetical, etc.).
History:
We are using the Tree UI element to display/manage a material bom interface. We seem to be running into an issue with displaying the nodes/leaves of the tree.. regardless of the order that the context is built (which is currently the order of the exploded BOM from from CS_BOM_EXPL_MAT_V2), the bom is displayed with the nested boms at the top of each level and the single materials below them. For example. If TK1 contains Material1, Material2, Material3, Kit1(containing component1, comp2, comp3), Material4, Kit2(containing comp4, comp5, comp6), and Material5 (in this order), the tree will display with the A level node as TK1, the next node as Kit1 (with its subleaves of comp1,comp2,comp3), Kit2(with subleaves of comp4,comp5,comp6), THEN Material1, material2, material3, material4, material5. Our users are adamant about the items displaying in the correct order (which should be alphabetical based on the description for one report and by location for purposes of inventory for another). I've searched but not been able to locate a similar question. If I've missed it, please point me in the right direction. The users want the tree, not a "tree" table. This is our first attempt at the tree, so maybe we're missing something basic?
TK1
-Mat1
-Mat2
-Mat3
-Kit1
--Comp1
--Comp2
--Comp3
-Mat4
-Kit2
--Comp4
--comp5
--comp6
-Material5
displays as
TK1
-Kit1
--Comp1
--Comp2
--Comp3
-Kit2
--Comp4
--Comp5
--Comp6
-Mat1
-Mat2
-Mat3
-Mat4
-Mat5

co-workers said example picture is misleading.. we can make the order work if everything is a "folder" but not a mix of "folders" and "files" (if making a visual reference to the windows browser). i.e - a file is represented as an empty folder.
TK1
. Mat1
. Mat2
. mat3
> kit1
.. comp1
.. comp2
.. comp3
. mat4
> kit2
.. comp4
.. comp5
.. comp6
. mat5
displays at
TK1
> kit1
.. comp1
.. comp2
.. comp3
> kit2
.. comp4
.. comp5
.. comp6
. mat1
. mat2
. mat3
. mat4
. mat5
we can make it work if everything is a folder. This is our current workaround.
TK1
> mat1
> mat2
> mat3
v kit1 (when expanded)
.. comp1
.. comp2
.. comp3
> mat4
> kit2 (when not expanded)
> mat5

3 iphones in household.All use same apple ID.But all contacts get mixed between phones and facetime calls come in from other contacts.Ho can we change this so our phone information isn't visible to each other?

3 iphones in household.All use same apple ID.But all contacts get mixed between phones and facetime calls come in from other contacts.How can we change this so our phone information isn't visible to each other?

Use separate Apple IDs for each family member and use Family Sharing features of those things (if any) that you do want to share. https://www.apple.com/ios/whats-new/family-sharing/

What is the purpose of Clearing and Revenue account in Asset Disposal : F-92?

Hi All,
Please clarify my doubt ;
In Asset Disposal - Sale to Customer : F-92 with customer
Suppose an asset with historical cost $1000 and accumulated depreciation of $100 is being sold to a customer at $1100, the posting entries will be as follows :
Dr     Customer Account (A/R)                    1,100
Dr     Accumulated Depreciation                    100
Cr     Fixed Asset - Acquisition Cost           1,000-
Cr     Gain/Loss of Fixed Asset Disposal       200-
Dr     Clearing Account for Asset Disposal   1,100
Cr     Revenue for Asset Disposal                1,100-
I completely understand the first four line items, but don't know the purpose or the 5th and 6th line items.
Please explain why we need a clearing and revenue account for asset disposal and what would be the impact of these accounts in asset accounting?
Thanks in advance !!!
Regards,
Vicki

Hi Vicki
This is just a technical account, which gets Dr and Cr in the same document
The purpose is just to tell you how much asset sale has happened during the year.. You can get this info by looking at the GL Account
Since Asset Module is a sub ledger, the asset needs to be retired. At the same time, the FI-GL also should show the needed info from accounting perspective
While the required GL entry is completed with the 1st 4 line items, the 5th and 6th are just the statistical ones
Br. Ajay M

Not able to edit assets in Illustrator/Photoshop and save over existing assets in Edge animation

Not able to edit assets in Illustrator/Photoshop and save over existing assets in Edge animation to update image changes. Has Adobe changed this capability with new releases? Does this mean to update an asset on the Edge animation timeline, you have to copy and paste all the animations of that old asset over to the new imported asset?

Hi, CamShazam-
You should be able to save over existing assets in the images/ folder, then close and reopen the file. The other option is to save your assets and then use the swap image option in the properties panel. Is this what you're talking about? Thanks,
-Elaine

Mix of Arabic and English causes problems in JTextArea

I have a JTextArea which displays HTML of an Arabic web page. So it's essentially a mix of English and Arabic. In the JTextArea, with columns set to 30, certain text just disappears instead of wrapping properly. The weird thing is that if I copy the invisible text and paste it into Notepad, then I can see it in Notepad. If I change the number of columns to 40, everything displays fine. Any ideas?

It seems that Arabic is not the problem here. It is something to do with tabs. All the lines that disappear begin with 5 tabs. If I remove one tab so that they begin with 4 tabs, then they appear fine in the JTextArea

Mixed content - https and http

Guys and Gals -
I have a page that has mixed content - http and https. Users talk to my webserver
using https, which talks to the portal server using http.
The browser popups a warning saying that the site has mixed content. Is there
any way to prevent this warning from coming up? Anything I can do using a proxy
or something else?
Thanks
Niks

Neeraj Harlalka wrote:
It's probably not because your webserver is talking to App server on
http connection. It could be some images being referrenced from the
browser using non-secured protocol. Try using absolute path or code URLs
using jsp tags.
hope it helps
Guys and Gals -
I have a page that has mixed content - http and https. Users talk to my webserver
using https, which talks to the portal server using http.
The browser popups a warning saying that the site has mixed content. Is there
any way to prevent this warning from coming up? Anything I can do using a proxy
or something else?
Thanks
Niks

Outbound Delivery Processing - mix of serialized and non-serialized product

Has anyone configured the outbound delivery processing scenario in AII to handle a mix of serialized and non-serialized products? How do you handle packing & loading transactions where you have a mix of serialized and non-serialized products in the same shipment?

Closed..
Thanks

Mixed phone numbers and names after sinc N9 and ov...

I have problem with my contact list. After i synchonised my previous N79 with N9, everything was fine. AFter adding new contacts to the new phone i wanted to synchronise it with ovi, i did so but it made completely mess with all my contacts. I cant say if i miss any numbers but it was way worse, it has mixed up names and numbers without any sence so I realised that under name A i had a phonecontact of B and C. At some names were suddenly no phone numbers. And some of them were even doubled - like there was the same number saved under both A and B but it belonged to C. I hate it, had to rewrite all the ontact list manually along the old phone. That took me hours if anyone can imagine. Now Im not brave enough to try the sync again eventhough i need to do that... Anyone having the same problem or even better - solution?

Try plugging your iPad into your computer and opening iTunes. Select your iPad underdevices on the left side of the screen and right click. You should be given an option torestore from a backup.
If this option is not available to you, you can go through the Summary tab of your iPad on the right side of the screen and if you scroll down under iCloud you should get an option to restore from a previous backup, where you select the most recent backup to put on your iPad.
Hope that helps.

Mixing Non JSF and JSF components

Hi All,
I wanted to mix non jsf and jsf components and I able to do this
<f:verbatim>
                                <input type="radio" name="selectBidder" value="#{currentRow['BID_ID]}"/>
                            </f:verbatim>But the problem is bean value is not getting binded.
The rendered output is containing same string i.e.
value="#{currentRow['BID_ID]}"
How to bind bean value to non jsf component.
And No Javascript please
Thanks
Sudhakar

Basically I am trying to implement something like below
<h:dataTable binding="#{consumer$Select_Provider.dataTable1}" headerClass="list-header" id="dataTable1"
                        rowClasses="list-row-even,list-row-odd" style="left: 48px; top: 48px; position: absolute"
                        value="#{consumer$Select_Provider.dataTable1Model}" var="currentRow">
                        <h:column binding="#{consumer$Select_Provider.column6}" id="column6">
                            <h:outputText binding="#{consumer$Select_Provider.outputText11}" id="outputText11" value="#{currentRow['USER_LNAME']} #{currentRow['USER_FNAME']}"/>
                            <f:facet name="header">
                                <h:outputText binding="#{consumer$Select_Provider.outputText12}" id="outputText12" value="Bidder"/>
                            </f:facet>
                        </h:column>
                        <h:column binding="#{consumer$Select_Provider.column1}" id="column1">
                            <h:outputText binding="#{consumer$Select_Provider.outputText1}" id="outputText1" value="#{currentRow['BID_PRICE']}"/>
                            <f:facet name="header">
                                <h:outputText binding="#{consumer$Select_Provider.outputText2}" id="outputText2" value="Bid Price"/>
                            </f:facet>
                        </h:column>
                        <h:column binding="#{consumer$Select_Provider.column3}" id="column3">
                            <f:verbatim>
                                <input name="selectBidder" type="radio" value="#{currentRow['BID_ID]}"/>
                            </f:verbatim>
                            <f:facet name="header">
                                <h:outputText binding="#{consumer$Select_Provider.outputText6}" id="outputText6" value="Select Bidder"/>
                            </f:facet>
                        </h:column>
                    </h:dataTable>Thanks
Sudhakar

ADF Faces: is mixing JSF RI and ADF Faces tags supported?

Hi,
I'm looking at ADF Faces as a future possibility for our application that is currently based on JSF RI.
When looking at the ADF Faces demo it strikes me that all pages are almost completely built up from ADF Faces tags.
For instance
af:form
af:commandButton
af:inputText
are used instead of the equivalent core jsf tags f:form, f:commandButton and f:inputText
I'm wondering if this is mandatory if we would like to use some ADF Faces components mixed within our existing application.
In other words: are ADF Faces tags supported in the environment of conventional JSF tags? And mixing ADF Faces JSF components with JSF components by other vendors?
Another thing that strikes me is that pages are constructed using ADF Faces tags for any and all markup content.
I guess this is meant to support several different clients (normal browser applications, mobile clients, voice activation over telephone) using different renderers.
In my experience abstracting markup this way inherently means loss of control over the exact markup that is sent to the client. This is not acceptable for all projects and customers.
Is embedding ADF Faces tags within template HTML, within f:verbatim tags or not, supported?
Regards,
Joost de Vries

You absolutely can mix JSF RI and ADF Faces tags. This is very much supported! You can swap in <h:form> and <h:commandButton> and <h:inputText>. Our versions support some features that the JSF tags do not, as described in our release notes.
Your point about using tags to produce all markup is a very cogent one. For some projects, absolute control over HTML will be a necessary requirement, so we do support that style of development. But we believe strongly that the future does not lie in constant handcoding of HTML, but instead in building more powerful, flexible, and reusable components and assembling those into pages. This was one of the themes of a talk I gave with two coworkers at this past JavaOne.
-- Adam Winer (JSF EG member and ADF Faces lead)

Mixed Environment: Wintel and Unix

We are currently looking into implementing HFM in a Mixed environment, Wintel and UNIX. The Web Servers and Application servers will run on Wintel; however, we are thinking of putting our Reports server in a UNIX environment. Are any of you running HFM in a mixed environment? We would appreciate any feedback...Thanks,Doug

From what you post about trying different things I would delete com.apple.ichat.AIM.plist and restart iChat
2:50 PM Sunday; November 18, 2007

How can one convert a picture to 1080 pixels in height at 72 dpi and retain the aspect ratio?

How can one convert a picture to 1080 pixels in height at 72 dpi and retain the aspect ratio?

The ppi has nothing to do with this. It will stay at whatever it is.
Go to image>resize>resize image, turn ON Resample image and enter 1080 for the height, making sure to leave constrain proportions turned on. Don't mess with the ppi setting.
If the image is set to another ppi setting, then after you're done with the above, go back into that window, turn OFF resample image, and set the ppi to 72. PPI only affects the inc/cm measurement.

ITunes home mix of French and English

In iTunes 7 just noticed at the store home page I have a minor mix of French and English on the same page.
Checked preferences and set for english
How do I report?

the language setting does not effect the language of the music store it simply changes the language of the menus and tool bars of itunes

Mixing 4:3 and 16:9 Aspect Assets

Similar Messages

Maybe you are looking for