Mixing Down Doesn't capture all audio tracks? AA(cs6)

Hello all, I've got a bit of an issue involving mixdowns.
I've recorded 7 guitar tracks and have 1 bass guitar backing track, and 1 drum backing track set up in audition for a total of 9 tracks. I'm ready to mixdown but when I go to do so the resulting mixdown doesn't have any of my guitar tracks and only contains the bass and drum backing tracks. While in multitrack mode if I mute the master track I can still hear my 7 guitar tracks, but the bass and drum tracks go silent. Is there a step I am missing somewhere along the line?

It sounds as if you have your guitar tracks Track Output is set to physical device outputs and are not set to Master. Mixdown only incorporates the output of tracks assigned to the Master. In each track panel, change the output drop down to Master and you should be set.

Similar Messages

How can I use ALL audio tracks in multiclip editing?

I want to be able to use all audio tracks after the multiclip cut.
It's only a two camera shoot, but I want to be able to use the ambient room sound from the second camera ... and control its level (in relation to the master audio track on the first camera) AFTER the cuts are made.
Is this possible in multiclip editing? And how does one go about it?
Apologies. I've spent an hour or so in the manual, and it isn't clear ... or I'm just not finding the right reference.
All ears,
Ben

Sorry if I'm steering you down a path you don't want to go or even if there's a better way but I wouldn't be ding complex audio mixing anywhere near the multiclip interface. Export your reference movie or nest the multiclip project into another sequence, bring in your additional tracks, get to work. Just my preferences, I put a bunch of rough keyframes in the audio tracks and enter some markers (and make a lot of paper notes). Then I go back using the large mixer window to do the fine tweaking.
Stick around for a couple of days, some other multiclip users with more experience than I will offer some more useful suggestions.
bogiesan

Channel strip plugin setting attaches to all audio tracks -- why

Hi all, an interesting thing happened today. Put down bass/drum/rhythm guitar trax. Rhythm guitar used a NI Guitar Rig 3 plugin -- a Vox amp with spring reverb.
So far, all is well.
Then I create a new audio track, for the lead guitar. Much to my surprise, it took on the settings of the rhythm guitar track -- the NI GR3 Vox amp with spring reverb.
I tried clearing the channel trip settings. I tried bypassing the plugin in the rhythm track. I created new audio tracks.
All to no avail -- all audio tracks retained the settings of that first track, that is Vox with reverb.
I finalyl created a new project and moved my tracks over. All is fine now, but does anyone know what might have caused that? And how to avoid in future?
I really enjoy Logic, but I have to wrestle with fear every time I open it -- a "what the f's gonna go wrong this time?" sorta feeling. I've started pricing out Pro Tools systems to be honest...

It sounds like you don't understand the concept of Logic - tracks and track objects.
You can have for instance twenty tracks, all set to an Audio Channel 1 object. The tracks themselves are independent, but all audio plays through that Audio Channel 1. This is great for, for eaxmple, comping up a vocal part. Note that audio channels are themselves monophonic, so you can have only one audio region playing at any one time.
This is different to independant arrange tracks that play through different audio channels..
So when you hit your "next track" key command, make sure you are using "Create Track with next object", and not "Create Track". Create Track just creates a new arrange track assigned to the same track object. The other one creates a new arrange track and assigns the next track object, so everything's fully independent.
This is a complexity in Logic that other DAWs don't have, but it's a great feature once you get your head around it. One reason I like Logic over other DAWs.
So arrange tracks and audio channels are not inextricably linked, as they are in other DAWs.

Premiere not showing all audio tracks in video file?

Hello,
The short version of my issue is that I am not seeing all audio tracks in my imported AVI video. I know they are there, but only one track is showing.
Longer version:
I have an application called Action! that is used for recording games. There is a setting on this application that allows you to record your microphone as a separate audio track. I made a 15 minute video using this. If i play this video in Action!'s media player, i can switch between my game track and my microphone track. If I play the video file in Windows Media Player, it plays both tracks. When I import this video file into Premiere (or Soundbooth) it only shows the Game track and not the microphone track. I cannot find a way to get to the microphone track. It just seems like it doesnt exist. Any thoughts?
Thanks in advance

music from library on drive/aiff

Move all audio track anchors at one time together

Move all audio track anchors at one time together..is this possible? I imported a remix, figured out the tempo. Now I want to make the tracks ( regions) all start on a downbeat to align with my measures..thx in advance for your assistance..

> How do you do that?
I'd begin by reading the Beat Mapping Track section in the Reference manual, p. 337...
> They are not referencing anything.
Oh, yes, they are: these anchors actually reference the first sample to be played... Presumably, they were recorded to start together and play along, right? When you dragged them, they all landed as new audio regions starting at the beginning of the same bar, since their respective anchors are all aligned at the start of the so-called region. These anchors will stick to the tick they landed to, whatever tempo change you make, unless you move the regions.
Or maybe you're missing something?...

Importing a project into PE 12 trial version, not all audio tracks play back!

I'm trying the trial vesion of PE 12. Imported a project that I had created with PE 9. Everything appears to have been imported, including all the audio tracks. But when i play it back, some of the audio tracks are completely muted, while others, are fine and I can hear it.
Any idea what can cause this?

With "muted" Audio Tracks, I would look at a few possibilities, and especailly with a Project created in an earlier version of PrE:
Open Audio Mixer, and look to see if any Tracks are Muted.
Play the Timeline, and observe the Levels in Audio Mixer, and also whether there is any movement of the "sliders" in Audio Mixer.
Observe which Audio Tracks your Audio Clips are, in the Timeline, and report those please.
Making sure that Keyframe Display is set to Volume in your Audio Clips, are there any Volume Keyframes?
I am sure that others will have a few more ideas, and questions.
Good luck,
Hunt

All audio tracks disappeared form the Timeline, but audio still works

Hi there.
I've been using Premiere for quite a while (I still have the 2.0 version), but this problem never occured before. I'm running Premiere on Win Vista.
I've been working on a project for a few weeks and eventually I got a version that was more or less final. Thus I tried to render everything a few times (Quicktime H264) but the render never succeeded because of an "API failure". Didn't manage to fix that, so I tried to render in wmv, just to check if it worked.
Well, it worked, but when render finished all the audio tracks had disappeared form the Timeline. I tried to find a solution on the web but couldn't find anything useful. No matters how much I scroll down and/or move the windows, the audio tracks just are not there. And the triky part is that I still can hear the sound when playing the sequence! I tried to add some empty audio tracks and Premiere apparently does it (it records it in the history), but no audio track shows up...
Any solutions?
Thank you

This sounds like a redraw problem, which is usually the fault of graphics hardware/driver. Try checking those.

Interpred Footage doesn't resample add. audio tracks

Hi,
I've a serious issue with the "Interpred Footage" funktion in Premiere. If you use it with footage containing more than one audio track - all additional audio tracks arn't resampled after project is reloaded or sent to AME - resulting in out of sync audio.
Has anyone similar problems or a workaround for this?

Hi Jim,
thanks... ;-)
anyhow I think our usecase is typical and important:
We use the "Interpred Footage" change framerate option regulary to conform mastered clips on the fly to different video standards.
For example:
A) We have a 24p 2K Digital Cinema Distribution Master DCDM
Our client asks for:
- 25p Press DVD PAL
- 1080p25 EPK material
so there is no time for complex conforming work in different applications... import into 25p sequence - insert Overlays - burn in TC - create stereo submix from 5.1 - export as PAL wide....
Or we get 23.976fps footage and have to conform it to 24p for Digital Cinema Package delivery...
Therer are complex workflows and multiple export targets involved if you get 23.976 and have to deliver 24p and 25p for WEB, TV, Home Cinema & Cinema
Only the "primary quality targets" getting a extra audio mix from the recording studio or HQ confroming via Izotope... If it's only for WEB or the subtiteling company - audio is streched on the fly...
So - ok we have an extreme usecase - but every filmmaker could be asked for a 25p image reference for DVD subtiteling of his 24p cinema master...
it's not only for slomo any more ;-)

Unable to capture 2 audio tracks

FCP refuses to capture 2 audio channels?! I have one mic on channel 1 and another mic on channel 2 but FCP captures only 1 mono track eventhough in Clip Setting both channel 1 and 2 are selected. Does anybody know what could be wrong?
Another thing is that when I have captured a clip - it won´t appear automatically in the Browser as it always has done? Now I need to import the Clip from my Project folder. FCP going crazy.

Hi boxpuppy,
iTunes is not able to import some Windows Media Player files. See this article for further information -
Importing Windows Media Audio files with iTunes for Windows
http://support.apple.com/kb/HT1844
Thanks for using Apple Support Communities.
Best,
Brett L

How do I hear all audio tracks in multiclip at once?

Working in Final Cut 5. I've set up a multiclip with three angles and everything is running fine. However, in my sequence, I want to have all six audio tracks active at the same time, and then use the multi clip to cut the video. How do I do this without having to lay each one back in?

I'm interested in this as well. Any thoughts out there?

Removing ALL audio tracks in a project

How do I remove ALL audio recorded in a .cp? I don't mean how
to compile w/o audio, I want to delete all tracks. I'd rather not
go through each slide and click each object and remove the audio
associated w/ it. I have lot's of audio that I want to get rid of.
Thanks.

Audio>>Advanced Audio

All audio tracks have same waveform in cs5

Dear Friends,
When i import 1080p AVI with 8 different audio tracks in Premier CS5 all my audio tracks have save waveform as that of track no 1. I mean all tracks looks the same though they are different as 5.1 and stereo.
Please help and advice. Thanking You.

I really have no idea what you are doing or what your signal routing looks like, nor do I know how experienced you are with audio software and signal routings in general. What I now think you mean is that you can't monitor your input properly, you cannot hear the signal of the mic? Is that right? Or how did you arrive to the conclusion that none of your plugins work on audio tracks? Have you actually put an audio file on your audio track?
If you want to hear your input +processed through Logics' plugins,+ you need to enable Software Monitoring - just add its button (with a 'muted speaker' icon) to the transport by rightclicking the transport and ticking *Software Monitoring* on the list. Button grey=off, button green with dot in it=on.
Of course the channel strip/track you receive the input on should also have an output selected, or you will never hear anything.

Video track order doesn't correspond with audio track order

I don't know why or if I've reset something in Premier CS3 but now when I insert a clip into video track 1, the sound of the clip is placed in audio track 3 instead of 1. And if I put another clip in video track 2, its sound is placed in audio track 4, and so on. This is driving me insane so I would appreciate any help to get it back to the default (audio 1 goes with track 1, audio 2 goes with video 2, ect.).

It still could be the way your tracks are mapped in the original project setting. Premiere will automatically send the audio from the source to an appropriate track type. (BTW - stereo and mono are not different "audio qualities")
The Header of each track has an icon showing either one or two speakers representing obviously mono or stereo. Check out the audio in the source monitor to see if it is mono or stereo and that will show you where the track will be targeted.

MPEG-4 ( H.264 ) Movies play ALL audio tracks simultaneously

In i-Tunes , when I try to play MPEG4's with multiple audio tracks (such as 1-english 2-director comment)both audio tracks play at the same time.
The files are MPEG-4's created by Nero Recode (AVC – HDTV profile).
There is no issue with any similar files with one audio track.
There is no issue playing these in VLC , WMP Mplayer, etc.
Is there an option to enable i-Tunes to allow me to select only one track?
Vista Ultimate 64-bit installed on a Core 2 Duo E6600 2.4GHz dual core CPU

Or, could someone explain how I might be able to view the file information in Terminal?

My recent tags drop down doesn not show all of my bookmarks like it did before. They are saved but I have to go to organize bookmarks to find them. How can I expand the tags drop down?

I switched computers and am in the process of adding by bookmarks and tagging them. Some of my tags no t longer appear in the drop down even though I have just viewed them. Any suggestions?

The Views menu in the Bookmarks Manager (Bookmarks > Organize Bookmarks) is for displaying the bookmarks in different sorting orders (hence the name Views) and doesn't sort bookmarks permanently.
Right-click a folder to open the context menu and choose "Sort By Name" in the left pane of the Bookmarks Manager or in the side bar to sort the bookmarks alphabetically or drag bookmarks to the wanted position. If dragging doesn't work then use Cut and Paste instead.
See http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox

Mixing Down Doesn't capture all audio tracks? AA(cs6)

Similar Messages

Maybe you are looking for