Mixing hypervisors and Ironic with NSX

I've been tasked with setting up a laboratory environment with OpenStack (Juno), and blades running KVM, Xen and VMware ESXi hypervisors, as well as bare-metal deployment of an arbitrary kernel, which I hope to do using Ironic (deploying CoreOS).
It's my first OpenStack deployment, so I'm looking for some guidance.
I see in the table at the bottom of this page of the OpenStack Cloud Administrator Guide that in order for Compute to work with VMware and Xen I need to get NSX.  A few questions follow from that:
Firstly, is NSX the only way to get this done?  Or is it only required for Neutron?
Where does NSX get installed?  Is it just on the ESXi hypervisor node or do I need it on the controller as well?  Or do I need it on every physical host?
I read somewhere that NSX costs about $6K "per CPU".  Is that literally per physical CPU or just per host?
What about baremetal with Ironic?  Does NSX get installed on the baremetal nodes as well?  Does NSX work with Ironic?
Thanks in advance for your assistance.

Hi aNonSequitur
1.Firstly, is NSX the only way to get this done?  Or is it only required for Neutron?
->NSX is not the only solution, in laboratory environment you can use nova-network.But nova-network only support flat, flat dhcp and vlan mode.
Where does NSX get installed?  Is it just on the ESXi hypervisor node or do I need it on the controller as well?  Or do I need it on every physical host?
-> In my previous test, NSX installed as a vm , you can install it in ESXi .you can reference this blog(I had failed).
OpenStack with vSphere and NSX - Series - EdgeCloud

Similar Messages

  • IMac OSX 21.5 late 2010, had MTN Lion on it. Prob with thousands of my photos in IPhoto all mixed up and intermingled with thousands of odd images I had not seen before. After trying to erase them, too numerous, I used original disk for disk utility. Disk

    Utility had issues with erasing disk. It took 36 hours and then said it was a failure. I tried repairing and verifying and partitioning. Finally, I used the original disk to install the system. It installed Snow Leopard. I was unable to install the 2nd disk ILife items, so I repurchased those. I thought I was all set but it would not upgrade past 10.6 or something. After it is all set up, I realize there is nothing on the computer. The updates were in download folders and in reading the install logs, it said the install disc was read only and the system was installed from somewhere else and then it was reaped and something about a sandbox and it seemed important that all the Asian languages were added in, even though I unchecked that option. All these odd programs and windows are on there, which I do not use and do not want on there and do not see it on there. So, I tried this several more times, it appears someone is using the Root user. I tried to disable the root user as I do not understand how to set it. Last night, I took the main partition that I put everything on and made me the owner and took over that whole disk. Then the other two were locked, do I ejected them. Then I wanted to erase 4 things - an iDisk an some other trash and the trash is suddenly emptying 989 items, I think were the logs. So, I turned it off. What is going on? I was unable to fix the install disk. The permissions were not repairable on the partition, it was verified as being ok though. Has someone taken over my computer? How can I get rid of them and get it fixed? It has affected my iPad and my iPhone 5. I really need these devices. I am an artist and need to take and post photos of my work. Is this Chinese people doing this and are they nearby?  I did notice they wanted me to sign up for mo ole me. in the logs  it even said, no [email protected]. And no password access at that address.  So, I was also not able to update to Mountain Lion and Icloud again. at one point it looked like I had. i downloaded everything I purchased that was in Icloud to Itunes and it showed the lion in Mail but there was no cloud icon and Mountain Lion said to install, meaning it was not installed. System information confirmed this. oh, and my main disk in disk Utility is named with an unchangeable name that is the serial number of the mac and it says it is an in/out sata media drive. Please, please help me.

    1. If you break your post into paragraphs it is much easier to read.
    2. I have no idea what your post is referring to, and how - if at all - it relates to iPhoto.
    3. It's a good idea to re-read what you've posted, and ask yourself how it might look to someone who doesn't know you and doesn't know what's going on with your machine.

  • Live video mixing, editing, and recording with multiple feeds in

    I'm REALLY new to this - does premiere (or any other Adobe product) enable you to record live video and mix it onscreen from more than 3 live video sources - LIVE (at the time of the event)?

    .also as much as i hate sony they make something called
    the "anycast"

  • Word 2007 mail merge : problem with mixed portrait and landscape orientations

    Hi there,
    I have a 3 pages document Word 2007 file
    This is a mail merge I want to export in PDF using Adobe Acrobat Printer,
    then send "big" PDF to printing.
    page 1 is PORTRAIT
    page 2 is PORTRAIT
    page 3 is LANDSCAPE
    In PDF pages 1 and 2 are perfectly fine, inside an A4 format (width=210 height=297mm or something)
    but for page 3, system changed to a "double" sized page (A3 width=297 height=420) and printed my stuff at the 1st top middle of big page.
    So I have a big "double" sheet, oriented PORTRAIT, with my stuff in 1st half, and a blank in 2nd half.
    It seems that system did not rotate the page... and just put the stuff into a bigger sheet to "solve" at best.
    I would like the same size of paper (A4) but in landscape : width=297 height=210
    I have already seen many PDF with mixed portrait and landscape orientations, so what's the thing ?
    With my advanced thanks,
    And greetings from Paris, France !
    Vince

    Some questions:
    Which version of office were you using before? 2003?
    Are the data files on a network, or on your local machine? If they are on a network, can you make a copy of one of them on your local machine and try again?
    Can you open the files directly in Excel? What extension do they have (.xls, or something else?) I am wondering whether access to other file types has been left blocked on your machine but is allowed on your colleague's machine.
    Are you just opening the mail merge main document and seeing this message? If so, do you see the same thing if you start with a new document and try to connect to one of these data sources?
    Can you confirm that the message is about Access even though you are trying to connect to an Excel file?
    (Also, office 2007 has some new stuff - that let's you specify that certain folders are "trusted" . I don't think that ever affected MailMerge but it may be as well to make sure that your documents and data sources are in trusted locations).
    Also worth trying to start Word in "Safe mode" - see, e.g. http://office.microsoft.com/en-gb/word-help/work-with-office-safe-modes-HP010140792.aspx
    Peter Jamieson

  • What dj mixer will work well with my iMac os x lion 10.7. I have installed virtual dj and djay apps.

    what dj mixer will work well with my iMac os x lion 10.7. I have installed virtual dj and djay apps.

    what dj mixer will work well with my iMac os x lion 10.7. I have installed virtual dj and djay apps.

  • Mixing and Matering with Logics Audio Effects Plugins

    I have a general question for those using Logic Pro to mix and perhaps master music. I've had the software for approximately a year-and-a-half. In that time I've auditioned several high-end, third-party, native AU plugins for EQ and compression (Waves SSL, PSP, Sonalksis, etc.) Certainly they sound great. But in the end, I often find myself getting just as good a sound with Logic's own plugs after a little bit of work. It's not as quick, mind you - and you really do have to play to get to know the plugins well because they're capable of some horrible sounds too. But the good stuff is in there.
    I see Logic's EQ's and compressors trashed sometimes in forums and I'm wondering if I'm missing something. Yes, I'm familiar with UAD and the quality/authenticity of their emulations. But at the end of the day, all I need is a great sound - not a particular historic sound, as good as some of those may be.
    The one thing I haven't been able to hear is Focusrite's Liquid Mix and I'm tempted to buy one just to hear it, with, of course the option to return it if it's nothing special.
    So here's what I want to know - and I am just curious. Are any of you out there mixing in the box with just Logic's plugins and really getting great results? Or perhaps mixing with mostly Logic plugins and a few indispensible others (L1 comes to mind). If so, are you mixing pop/rock, R&B, acoustic - basically, something other than electronic/dance?
    Thanks

    Are any of you out there mixing in the box with just Logic's plugins and really getting great results? Or perhaps mixing with mostly Logic plugins and a few indispensible others
    My 'indispensible others' would be Izotope's Ozone, PSP Vintage Warmer and to a lesser extent TriTone's ColorTone Pro.
    But in the end, I often find myself getting just as good a sound with Logic's own plugs after a little bit of work. It's not as quick, mind you - and you really do have to play to get to know the plugins well
    I agree completely. I'm often reading here that this plug or that gadget is a must have - actually, learning what's already in the Logic Pro suite is often the solution. The essential ingredient are ears, and the ability to know what sound you're looking for, as opposed to twiddling in the hope that you'll come across a happy accident.
    because they're capable of some horrible sounds too
    If you want to hear some truly awful sounds, Ozone can destroy a mix in short order

  • Https site with no mixed content and EV cert is shown as mixed and not identifiying itself

    My site https:orderform page contains only https images and website has an EV cert that is valid and current. With history cleared and visiting page for first time Firefox reports that page contains mixed content and that site does not identify iteself.
    Hitting F5 to refresh the page address bar correctly shows green with no mixed content popup and that side idenfies itself.
    SSLCertificateChainFile has been added and this makes no difference.
    Problem does not occur in other browsers (IE, Safari, Chrome).
    A new FF profile has been tried but same problem occurs.
    Why would refeshing the page work?
    Problem affects all firefox browsers 3.5 to 14.01. I dont know about those <3.5.
    I have read and tried most suggestions in forum and elsewhere but cant find a solution.
    I have not provided the url as this is my order page and its important for me to see genuine visitors.

    First a reply to Jsher2000
    Thank you for your suggestions. Yes and Yes did this ages ago but no non-https content.
    I have found a workaround for what appears to be a bug in Firefox:-(
    Here is the non-perfect workaround. First Detect firefox
    xUA=navigator.userAgent.toLowerCase()
    xFf=xUA.indexOf('firefox')!=-1
    if(xFf) top.location.href='https://ord.html'
    else top.location.replace( 'https://ord.html' )
    The current non-secure page is being replaced with a secure one.
    Internet Quote:
    "The difference between location.href and location.replace is that the former creates a new history entry on the visitor's browser meaning that if they hit the back button, they can get in a 'redirection loop' which is usually undesirable and may have unwanted side effects."
    It appears that FF is using some content (cached) from the previous non-secure page when replacing - leading to the mixed content and non-identified site. An F5 refresh or reload of current page will show that site identifies iteself and there is no mixed content.
    In summary its a Firefox Bug.

  • When I get an i.m on ichat it mixes up the letters with uppercase and lowercase how do I fix that?

    When I get an i.m on ichat it mixes up the letters with uppercase and lowercase how do I fix that?

    Hi,
    Depends.
    Is it some sort of Incoming Override you have or their Outgoing IM Style ?
    Go to the iChat Menu > Preferences > Alerts
    Select Message Received in the top item/Drop down.
    When selected check that the Apple Script option is Not On
    If it is is the AppleScript Selected the Mix Message Case one ?
    This is iChat 5 only (this particular AppleScript)
    If the Buddy has it set against Send Message they Output Mixed Case IMs so it could be from the other end.
    8:37 PM      Saturday; May 7, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
    , Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • WDS wired and wifi with mixed airports

    Hi,
    I've been having a heck of a time with 'fixing' a mixed wired and wifi network. 2 days so far and it's still not how I want it.
    It was working okay, then I started getting errors with IP's being duplicated, so I started over.
    Here's what I have :
    Orange France Livebox (dsl router)
    ABS-g (dual ethernet)
    ABS-n (pre-mixed g/n environment)
    2 AExpress-g
    Netgear Switch
    Original setup :
    livebox to netgear switch, feeding wired ABS-g (dual ethernet) and wired ABS-n (pre-mixed g/n environment). ABS-g acting as Main for WDS and feeding ABS-n via the switch, plus 2 AExpress-g via wifi.
    It all worked for about 2 months. Then the problem with duplicate IP addresses.
    So now the setup I have is :
    Livebox wired to ABS-n, which then feeds to Netgear Switch to LAN wired, plus, 2 AExpress-g on WDS via wifi.
    This works.
    Here's the problem :
    I want to extend the wifi network via wired, because there is some distance between the base stations. HOWEVER. Whenever I connect one of the base stations, which is configured as WDS Remote, via wired, I instantly loose my internet connection ... everywhere. Wired and wifi.
    The base stations get self assigned addresses and I have to take the cable out of the ABS-Remote and then, take the cable (from the Livebox to the ABS-n) out of the ABS-n and put it directly into my Mac, to get the connection back.
    I have restarted, zeroed everything many times. Finally I have narrowed the problem down to trying to have a wired connection to one of the WDS remotes. As soon as I plug a cable into a WDS Remote, I loose the connection.
    Can anyone suggest what I might be doing wrong, or how I could reconfigure to enable either the ABS-g (dual ethernet) or one of the ABSExpress's to operate via a wired connection, thus much more effectively extending the wifi network.
    Any help/pointers much appreciated.
    Grant

    Please take a look at this Apple Support reference to see if it will help you identify your AirPort: Identifying AirPort Hardware
    I have seen that link elsewhere on this board. Unfortunately it's out of date. Yes you can go to the first page and visually identify your airport unit, but there is no model number next to the pictures. Clicking the 'More Info' link returns an error that the page does not exist.
    The same holds true for the Apple pdf about designing Airport Networks. Dead link.
    In a roaming network, ALL of the AirPorts must be connected by Ethernet or be on the same Ethernet subnet. Adding the Ethernet switch to one the 802.11n AirPort Extreme Base Station's (AEBSn) LAN ports will provide the additional wired ports for the AEBS and the AXs.
    Since you have the AEBS connected by Ethernet to the Livebox, all of the AirPorts must all be reconfigured as bridges. Each will broadcast their own wireless network, but this network will have the same Network Name and use the same encryption setting. The only difference is that each AirPort must operate on a radio channel at least 3-5 channels away from that used by next nearest AirPort to prevent interference.
    Having spent another hour or so, reconfiguring again, I've understood, that I cannot have an unwired ABS on a roaming network, even if it would appear to be on the same subnet. It gets no IP and is therefore lost in space.
    So it would seem that anyone wishing to include some wired and some unwired ABS in a single 'seamless' network, needs to make a WDS for all the unwired ones ... and a Roaming network (with the same network name and password as the Main ABS network) for the wired ones.
    This is what I have done and it looks to be working perfectly. All are in Bridge mode and all are on Automatic Channel ... and I note that the Airport Utility automatically gave a very distant channel to the wired ABS.
    The network appears to be stable and fast. Phew.
    As an aside ... it's a shame that the Airport Utility, whilst clearly a very clever piece of software, doesn't have more helpful explanations of what is going on. The wording is often ambiguous at best. A teeny bit more explanation would have saved me hours and hours of wasted time.

  • Playlist with mixed songs and videos

    I'm trying to use a Nano to play music and videos with a projector system. I'd like to play a playlist with both mp3 audio files and mp4 music videos.
    Setting up the playlist is no problem. In iTunes (Mac) it plays fine, switching between audio and video modes.
    However, on my Nano, if I play the list from the Songs menu, I only get the audio from the video files. OK, fine, I understand the logic of that. But when I select the playlist from the Video Playlists menu, I only see the Videos and it won't play the music-only files.
    Is there any way to get the Nano to play the mixed playlist like iTunes does?
    Cliff

    You can't do it with the iPod nano, but I have been doing it with a 5th gen for several years. I was shocked to find out this feature is now gone in the new nano. I'm guessing (but would like confirmation) that the same is true for the iPod classic since they use the same GUI/OS.
    I sent feedback to Apple here - http://www.apple.com/feedback/ipodnano.html
    Maybe if more folks who want that feature back, Apple will fix it.

  • Mixing ECC and NECC (Non-ECC) RAM Modules

    Hi,
    I have a G5 Dual Core 2.0 with a pair of 512Mb Non-ECC (NECC) RAM installed and I want to upgrade to 3Gb. I'm thinking of getting 2Gb ECC modules and discarding the 1Mb NECC installed. But I came across a phrase in the Apple Manual of my G5 that states "DO NOT MIX ECC and NON-ECC Memory Modules WITHIN A PAIR." Does that mean I can mix ECC and NECC within Memory Banks and NOT within a PAIR? Because in that case I won't have to discard my NECC 1Gb and have a mixed 3Gb Memory!? I'm afraid to actually try it so I would appreciate your insights. Thanks much.
    G5 Dual Core 2.0   Mac OS X (10.4.7)  

    Yes. You can mix ECC and nonECC as long as you don't pair the ECC with the nonECC. The computer will just treat all RAM as nonECC.
    You can keep the original memory as long as the two 512MB DIMMs are always paired with each other.

  • Mixing XDCAM and HDV?? Outputting to SD DVD...

    Hi
    Earlier this year we shot a documentary on a Sony PDW-F350L HD XDCam (great camera, stunning footage - 35Mbps). Working in FCP has been fine.
    We're doing a follow up and budget and logistics dictate that we sadly can't use 350s again (where we're going, carrying 2 Z1s for example is going to be a lot easier). We're also on a fairly steep learning curve (being relatively new to FCP, Compressor etc).
    So I'm looking at options. We know that there are significant differences between say a Z1 and a 350 but from my research so far and from some relatively simple testing mixing Z1 footage (native) and 350 footage on FCP, at least editing on the timeline doesn't seem like it's going to present any problems (although thoughts on that welcome).
    The issue seems to be outputting. In the first instance we'll be outputting to SD DVD. Yes, that old gem...
    Searching round various forums, it seems this problem (HDV - SD) is fairly universal. Solutions seem to range from not working in Native HDV (suggestions vary on the format to ingest in - AIC etc); outputting to different formats first (eg DVCPro HD) and then to MPEG-2; outputting the timeline to tape (DV), re-importing; using some thing like a Matrox MXO to output and others...
    We're aware of the shortcoming of HDV and the compressed nature of the format and our expectations, given our kit are realistic. I've even tried putting some PD150 footage on the timeline but that's just not going to cut it.
    So, I've got to put a kit list together by next week and wondered if anyone had any thoughts on:
    1) Mixing XDCAM and HDV on the timeline and any gotchas we should watch out for.
    but more importantly
    2) Any suggested routes I can look at to get some reasonable output with these two formats on the timeline - particularly HDV (don't think we'll have time to look at the Matrox route right now).
    Many thanks in advance for any thoughts.
    Cheers

    Thanks Andy, Michael
    That's good input. From an editing point of view we seem to be ok. Although, Michael, I take your point and that's a good suggestion.
    The main problem is the workflow to create a decent SD DVD without the artefacts caused by compression/motion etc in HDV (and to some extent XDCAM).
    Have read the prores whitepaper at
    http://images.apple.com/finalcutstudio/resources/whitepapers/L342568A_ProResWP.pdf
    And looked a little more into understanding GOP structures and it seems that ProRes will help in terms of editing.
    The white paper seems to suggest that converting to ProRes, because it uses I frame–only encoding "Ensures consistent quality in every frame and no artifacts from complex motion. "
    We'll try some tests but, does anyone know if this is true?
    But it also seems that deinterlacing may solve some of the horrendous vertical edge rippling we're getting on the HDV footage when outputting to SD DVD - although if I'm honest I'm not sure how we achive that with our current setting.

  • I have two apple ID's, one with all my apps and one with only Mavericks. Will Mavericks update automatically if i'm not logged in to the apple ID I used to download it?

    I have two apple ID's, one with all my apps and one with only Mavericks. Will Mavericks update automatically if i'm not logged in to the apple ID I used to download it?

    Some things are mixed up here, seemingly...
    I seem to have two Apple ID's attached to my e-mail.
    An Apple ID is a valid email address, apparently. How can those be "attached to your email"... what email?
    Facetime will not verify my e-mail address because it is associated with the other account.
    This doesn't make sense. You can register multiple, even non-Apple-ID, email addresses and their aliases with FaceTime.
    So, maybe you can explain your problem better - what you want and the steps you've taken and what you have so far. If something doesn't work, please tell the exact error message, too.

  • Mixing static and dynamic content in a single outputText value causes NPEs

    Hi,
    I am having a problem and I'm wondering if it is a result of my error or if this is a bug.
    I am mixing dynamic and static content in the value attribute of tags (e.g., outputText). On initial page load, everything works fine. However, if the same view is reloaded (e.g., after a failed validation) I get an NPE from JSF:
    [#|2006-10-24T08:49:03.756-0500|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.container.web|_ThreadID=12;|StandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
    java.lang.NullPointerException
            at com.sun.faces.el.MixedELValueParser.getNextToken(MixedELValueParser.java:140)
            at com.sun.faces.el.MixedELValueParser.parse(MixedELValueParser.java:123)
            at com.sun.faces.el.MixedELValueBinding.getValue(MixedELValueBinding.java:60)
            at javax.faces.component.UIOutput.getValue(UIOutput.java:147)
            at com.sun.faces.renderkit.html_basic.HtmlBasicInputRenderer.getValue(HtmlBasicInputRenderer.java:82)
            at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.getCurrentValue(HtmlBasicRenderer.java:201)
            at com.sun.faces.renderkit.html_basic.LabelRenderer.encodeBegin(LabelRenderer.java:128)
            at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:683)
            at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:443)
            at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:233)
            at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
            at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
            at com.sun.faces.renderkit.html_basic.GroupRenderer.encodeChildren(GroupRenderer.java:130)
            at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
            at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
            at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:233)
            at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
            at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
            at com.sun.faces.renderkit.html_basic.GroupRenderer.encodeChildren(GroupRenderer.java:130)
            at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
            at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:445)
            at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:233)
            at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:701)
            at javax.faces.webapp.UIComponentTag.encodeChildren(UIComponentTag.java:609)
            at javax.faces.webapp.UIComponentTag.doEndTag(UIComponentTag.java:546)
            at com.sun.faces.taglib.html_basic.PanelGridTag.doEndTag(PanelGridTag.java:460)
            at org.apache.jsp.registration_jsp._jspx_meth_h_panelGrid_0(registration_jsp.java:324)
            at org.apache.jsp.registration_jsp._jspx_meth_h_form_0(registration_jsp.java:223)
            at org.apache.jsp.registration_jsp._jspx_meth_f_view_0(registration_jsp.java:157)
            at org.apache.jsp.registration_jsp._jspService(registration_jsp.java:118)
            at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:105)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
            at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:336)
            at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:297)
            at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:247)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
            at sun.reflect.GeneratedMethodAccessor188.invoke(Unknown Source)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:585)
            at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
            at java.security.AccessController.doPrivileged(Native Method)
            at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
            at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
            at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
            at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
            at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
            at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
            at java.security.AccessController.doPrivileged(Native Method)
            at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
            at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:723)
            at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:482)
            at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:417)
            at org.apache.catalina.core.ApplicationDispatcher.access$000(ApplicationDispatcher.java:80)
            at org.apache.catalina.core.ApplicationDispatcher$PrivilegedForward.run(ApplicationDispatcher.java:95)
            at java.security.AccessController.doPrivileged(Native Method)
            at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:313)
            at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:326)
            at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:132)
            at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
            at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:248)
            at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
            at javax.faces.webapp.FacesServlet.service(FacesServlet.java:194)
            at sun.reflect.GeneratedMethodAccessor202.invoke(Unknown Source)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:585)
            at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
            at java.security.AccessController.doPrivileged(Native Method)
            at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
            at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
            at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
            at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
            at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
            at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
            at java.security.AccessController.doPrivileged(Native Method)
            at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
            at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
            at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
            at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
            at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
            at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
            at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
            at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
            at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:132)
            at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
            at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
            at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:189)
            at com.sun.enterprise.web.connector.grizzly.ProcessorTask.doProcess(ProcessorTask.java:604)
            at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:475)
            at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:371)
            at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:264)
            at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:281)
            at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:83)My code looks like this:
    <h:outputText escape="false"
              value='<link href="#{myBean.styleSheet}" rel="stylesheet" type="text/css"  />' />If I replace this with a much more convoluted set of tags, it works:
    <h:outputText escape="false"
              value='<link href="' /><h:outputText escape="false" value="#{myBean.styleSheet}"
              /><h:outputText escape="false" value='" rel="stylesheet" type="text/css" />' />So is the problem that I am mixing dynamic and static content with a single value? If so, why does it work on the first view, and not after?
    If it matters, I'm using the reference implementation version 1.1 (as included with NetBeans 5.5RC2) on SuSE 10.0 w/ JDK 1.5_09.
    Thanks,
    Bill

    Yes, that's how I originally had it, but then changed it to the outputText approach since a single tag could do what I wanted, as long as I was allowed to mix static and dynamic content within a single value.
    I think this is a bug in JSF 1.1, since if what I am doing is illegal, it should throw an exception on the first page view, not work on first view and throw an exception on subsequent views. I'm guessing that this has something to do with the fact that on first page view it only runs the restore view and render response JSF phases, while on subsequent requests all of the phases will be run, and it's in one of those other phases that the exception is thrown.
    For now, multiple tags is the work-around, I guess.
    Thanks,
    Bill

  • Can you mix DV and HDV in the same sequence?

    Hi Everyone....
    I am new to the forum, and new to FCP...yes! I joined the dark side and just got a MAC.
    I am trying to learn this system, and the 500 manuals it came with are about as clear as mud.....
    Can I mix 16x9 DV footage with 16x9 HDV footage? And please don't tell me I am hosed!
    I have some footage right now in a sequence, but it has the red line above the sequence, indicating that it needs to render.
    And actually I can't even get the high def footage alone in a sequence to work...but that is another post.
    Thanks in advance...
    Aubry
    Mac Pro Quad Xion   Mac OS X (10.4.7)   2.66 GHz | 4GB ram | NVIDIA GeForce 7300 GT | 1 250G &1 500G Internal Drives

    I think what your asking is this....the captured clip is:
    frame size: 1440x10180
    compressor: hdv 1080i60
    data rate 3.2 mb
    pixel aspect: hd 1440/1080
    I changed the sequence settings to match this and it came out all kinds of funky.
    Is there another way to find out what kind of high def the clip is? I have the Sony FX1 if that matters....

Maybe you are looking for

  • Reader 9.3.3 Breaks forms with mailto button

    We have been testing Reader 9.3.3 and have just discovered that it breaks one of our online forms that have a mailto button.  We receive an error: Security Block: Acrobat does not allow connection to: mailto:maibox name It works just fine on any prev

  • Quetsion about Menu

    Ok I don't have an IPOD Classic, but I intend on getting one. A big question for me is can you get the classic screen instead of the "split screen" which appears to be half-artwork. I think you guys know what I mean.

  • How do I get filtered rows from JTable

    Hello, I'm using RowSorter to filter my data on a JTable, but now I need to get the rows that were not filtered out so I can export it to a CSV file. Any ideas how to accomplish this? Thanks, Thiago

  • Opening old Premiere 6.1 ppj files in Pro CS5.5?

    I have just run across some CD-ROMs with backups of some OLD Premiere 6.1 .ppj files on them (including the source file videos too). When I stuck it into my cd-rom just now, the .ppj files showed up as "Premiere Pro" file types. I tried to open them

  • What is so great about Lion?

    It seems as though Lion is mainly for macbooks and ipads? Otherwise it seems the features aren't really warranted for desktops? Any good reasons for upgrading from a well working Snow Leopard?