Mixing latin and kyrillic characters for correspondence with PC User

Hi!
I (Mac, G5 Dual, OS 10.4.6) intend to exchange eMails via Mail with a friend (PC) who can help me to learn Russian. So I have to mix Latin with Kyrillic characters in the same mail. Is there an easy way to do this besides creating and sending pdf-files? Because if I use a kyrillic font he doesn't have the same font - and I am not sure anyway if the font information gets lost when he receives te mail.

Is there an easy way to
do this besides creating and sending pdf-files?
Because if I use a kyrillic font he doesn't have the
same font
Fonts don't matter, only encodings. Just type your message using the US and Russian (or whatever) keyboard layouts and send it. Before sending, it might be best to go to Message > Text Encoding and choose Windows 1251 or KOI-8R. If you don't see these present, go to system prefs/international/langauges and add Russian (in cyrillic) to the list using the Edit button.
For general info see:
http://homepage.mac.com/thgewecke/TypingCyrillic.html

Similar Messages

HT5731 How can I download my TV episodes to my Macbook Pro. I bought them from my iPad2, and I looked for them with the same AppleID on iTunes Store and they wont download to my iTunes.

How can I download my TV episodes to my Macbook Pro. I bought them from my iPad2, and I looked for them with the same AppleID on iTunes Store and they wont download to my iTunes.

What country are you in ? Depending upon what country that you are in then you might be able to redownload them on your Mac's iTunes via the Purchased link under Quicklinks on the iTunes store homepage
If you're not in a country where TV programmes can be redownloaded then connect the iPad to your Mac's iTunes and use the File > Devices > Transfer Purchases to copy them over from your iPad

HT204053 I did not know my kids had set up an Itunes account for me with one user name and password. then i got an i phone and set it up with a different email address and new password. how can i get my accounts to merge so i can have all of my music on

I did not know my kids had set up an Itunes account for me with one user name and password. then i got an i phone and set it up with a different email address and new password. how can i get my accounts to merge so i can have all of my music on my iphone

Quote: "You cannot merge two or more Apple IDs into a single one. You can, however, use one Apple ID for iCloud services and another Apple ID for store purchases (including iTunes in the Cloud and iTunes Match). See “Using one Apple ID for iCloud and a different Apple ID for Store Purchases” above for details." See also Apple ID & iCloud FAQ: http://support.apple.com/kb/HT4895?viewlocale=en_US&locale=en_US
You can set up your iCloud account on your iOS device under: "Settings > iCloud" and a other account for store purchases under "Settings > iTunes & App Stores". Unfortunately merging accounts is not possible but you could transfer all of your music manually via iTunes from your Mac or PC.

Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 IP for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS which is in a different .Domain

Hi,
Can we assign 2 IPs for a SCCM 2012 primary site server and use 1 Ip for communicating with its 2 DPs and 2nd one for communicating with its upper hierarchy CAS . ?
Scenario: We are building 1 SCCM 2012 primary site and 2 DPs in one domain . In future this will attach to a CAS server which is in different domain. Can we assign 2 IPs in Primary site server , one IP will use to communicate with its 2 DPs and second
IP for communicating with the CAS server which is in a different domain.?
Details:
1)Server : Windows 2012 R2 Std , VM environment .2) SCCM : SCCM 2012 R2 .3)SQL: SQL 2012 Std
Thanks
Rajesh Vasudevan

First, it's not possible. You cannot attach a primary site to an existing CAS.
Primary sites in 2012 are *not* the same as primary sites in 2007 and a CAS is 2012 is completely different from a central primary site in 2007.
CASes cannot manage clients. Also, primary sites are *not* used for delegation in 2012. As Torsten points out, multiple primary sites are used for scale-out (in terms of client count) only. Placing primary sites for different organizational units provides
no functional differences but does add complexity, latency, and additional failure points.
Thus, as the others have pointed out, your premise for doing this is completely incorrect. What are your actual business goals?
As for the IP Addressing, that depends upon your networking infrastructure. There is no way to configure ConfigMgr to use different interfaces for different types of traffic. You could potentially manipulate the routing tables in Windows but that's asking
for trouble IMO.
Jason | http://blog.configmgrftw.com | @jasonsandys

Hi we setup ISE in our lab and planning for prodution with 2000 user endpoints. We have SNS appliance but confused with ISE lice

Hi we setup ISE in our lab and planning for prodution with 2000 user endpoints. We have SNS appliance but confused with ISE license bt plus and advanced..Please advise.

Plus:
    Bring Your Own Device (BYOD)
    Profiling
    Endpoint Protection Service (EPS)
    TrustSec SGT
Advanced :
    Bring Your Own Device (BYOD)
    Profiling
    Endpoint Protection Service (EPS)
    TrustSec SGT
    Mobile Device Manager (MDM)
    Health Compliance and Remediation
    Posture
Base license is Perpetual

Help! connections for the midi and audio cables for use with Apogee & Logic

Newbie to mac! A Basic question, I know.
I have:
Logic express 8
1 x Apogee Duet
1 x Midi in/out interface.
After my external sound module recieves the midi info stored in logic, it creats an audio signal.
QUESTION!
How do I... monitor this output with my audio recoded files in logic. so audio and midi (final mix) is played together, using the Duet?
I understand that a seperate mixer would do the job, i have one, but i need to keep the music making and recoding process as simple as possible, otherwise i get annoyed with lots of settings and things and give up... for another year!
All I wanna do is:
Record one real instrument at a time. these would be Guitar, Bass and Mic. (ok, simple connections with the duet.)
Record midi keyboard messages into logic, edit, quantise etc. rhave logic send the midi info out to my roland xv 5080, and route the audio out of the xv 5080 with the final mix.
(I dont know if this can be done with the Duet??)??
Whilst advoiding the use of a seperate hardwarwe mixer.
would i have been better going for the Ultralite or something?
Any help is much appreciated as i am struggling to get my head round the basics.

I understand that it can be done this way, but i will be continually swapping leads. Yes a mxer wuld solve this, bu would a cheapish mixer effect the sound quality of the duet?
could i use the digital output on roland and send to the imac's digital in? and at the same time record audio in logic. so basically this digital signal will go into imac into logic then be routed straight to the output that the duet is connected to? Would this work, is there a seting in logic where u can have more than 1 input and send this straight to the main outputs??
ooooo, maybe thats a possibility, just hought of that. dont know if it'll work though.
Thanks clanwork

Reformat external HD and possibly partition for use with mac and pc.

Hi. I’d really appreciate some advice. I’m a new Mac (MacBook Pro mid 2012) user. I’m trying to figure out how to use a new external HD (WD My Passport) that just arrived today in connection with a digital tv media player (NBOX V3) that I use to watch videos on my tv, which is in the NTFS format. The tv box works with a flash drive that I have, which I had to reformat as FAT32. Since I tend to max out the storage on the flash drive I ordered this new hd to use as well.
When I went to reformat the new hd I didn’t see the FAT32 option. There are 4 Mac options, MS-DOS (FAT), and ExFAT to choose from. I read that ExFAT would work with both mac and pc (since I’m using OS 10.8.4 and my pc is Windows 7). I was excited about it too since I know that FAT32 has a 4gb limitation. I reformatted as ExFat first on my Mac and then on my pc. I tried both b/c I read conflicting comments about it not working when reformatting on the mac, but that it would work when done on the pc. Both times I tested the newly formatted hd on the tv box and both times it failed to recognize the files. After the failures I wondered if it was even possible for the external hd to work with the tv box, or if it had something to do with the ExFat format. So, I reformatted it on my pc to NTFS and then plugged it into the tv box, which works just fine.
I could really use some advice. I wish the hd had the FAT32 option. I’m wondering about partitioning. I really don’t know too much about it, but am wondering if this might be the answer to make everything work. I would need everything to work from my mac b/c the pc belongs to my husband (which I’m welcome to use), but all of the files that I load are from my computer (not to mention I’m already “used to” my mac and now seem to fumble around using a pc). This might sound dumb, but I was thinking that if I made 2 partitions (one that would work with my mac and one that would work with the tv box, maybe the FAT option?) then I could load files on the mac friendly partition and then transfer them to the tv box friendly partition. I’m thinking it won’t work so I wanted to find out first, plus I’ve never partitioned anything before. I also know that on another external hard drive that we have for the pc I’m not able to modify the files on it from my mac, although I can see them and extract them. I’m thinking if I partition this new hd I’ll have the same problem with the partition that is formatted as FAT.
Partitioning might not even be an option. If anyone knows a way to make what I want to do work, then I would really appreciate the advice. Thanks in advance.

Digital tv media player (NBOX V3) - NTFS, FAT32/MSDOS
Mac - HFS+, exFAT (formatted on a PC best), FAT32/MSDOS
Windows PC - NTFS, exFAT, FAT32/MSDOS
Problem is if you use FAT32/MSDOS your capped at 4GB sized files and can't use larger storage drives. The other formats have no problem.
The Mac can't write NTFS without further software being installed like Paragon NTFS
I usually try to stick with neutral formats, but if your NBOX V3 doesn't accept exFAT then your stuck.
Perhaps you should see if there is a firmware update for it that will enable exFAT, then format the drive exFAT on the PC and you should be set.

What are the ASC11 and hexadecimal characters for wireless passwords?

I am trying to set up my wireless airport and have no clue what these characters are. I use a cable modem and a router for my current setup but now have an Extreme and Express to go wireless. I remember seeing a diagram for setting up a home network but can't locate it now that I need it.
Thanks in advance for any help.

Are the characters numbers? Letters? OR????
Are they to be entered in a certain order or font???

Linksys M10 and Mountain Lion OS problems with Guest User - which router is best to upgrade to for Maverick and higher OS coming in fall?

Since we upgraded our OS to Mountain Lion the Guest User on the Linksys M10 router isn't working. Not compatible. Which Linksys should one upgrade to for use with Maverick OS and the newer releases coming this fall and onward?

Sorry - I have Maverick 10.9.4 and the guest user on the link sys M10 isn't compatible. Any suggestions on which wifi router to upgrade to for newer releases of OS coming?

IDfix Tool and Appropriate Changes for Syncing with Office 365.

1. Our on premise domain is .local - DirSync will require an Internet routable extension (.org in our case). If I change my address to .org, will that impact my ability to login to my domain? Is there a special process for this situation?
2. For the Distinguished Names that show up in the IDFix tool that have the wrong address in the "Value" column, can I simply change the address in the "Update" column to the correct one even if it means changing from .local to .org?
3. For user Distinguished Names that show up in the IDFix tool that do not have an email address (nor do I want them too) - How do I exclude them from the sync process, what changes (If any) should I be making to these users?
Thanks For All Your Help
KB

Hi,
1. You have to add the UPN-Suffix on your on-premise Domain. After that, you can Change the UPN-Suffix for specific or all Users. Problems can occur, when Users using their UPN for Domain Login. Obviously they have to enter an the new UPN Suffix, but
there can be other side effects. I would recommend to test this very good.
2. I never used IDFix tool. I would using the GUI to add the UPN Suffix to the Domain. And changing the Suffix on the Users depends on the amount, but I would prefer to use Powershell.
3. You can configure Dirsync before the first sync is running. I have created a blog post about this Topic which might could help:
http://sccmfaq.wordpress.com/2014/01/23/azure-directory-sync-initial-configuration/
www.sccmfaq.ch

Scudmenu -- A dmenu script for use with systemd --user

So a while ago I started using systemd --user to manage my session, and I was pretty happy with how it turned out. However, I use a tiling wm, and sometimes I just want to quickly start or stop something without opening a terminal (say I'm looking at my mail and want to quickly restart offlineimap). Suckless' dmenu program is great, and really good for starting programs in your path.
When I typed in
systemctl --user
that would clear out the completion and just leave it to me to know the units names and everything.
So, I created a script called scudmenu that I bound to a key in my window manager. It opens up two dmenu's in order: the first to get the operation you want to run, and the second to get the unit name.
It would look like this:
Action: [start] stop restart try-restar...
systemctl --user start [dbus] dwm i3...
giving me a nice overview of the units that I have. (the second one actually takes the name of the action you select and uses it for a title)
I've put together an AUR package, scudmenu-git, that will install this to your system. At the moment, there is no configuration and it depends on a specific font, but I will be adding configuration options (such as fonts, colors, and a terminal for the 'status' output) soon. Technically you can just say
font="some-font-*-*-*-*-..." scudmenu
at the moment, but that's a bit annoying.
Last edited by KaiSforza (2013-04-14 01:38:49)

You can see the setAttributes() method signature like so:
<cfset whitelist = CreateObject("java", "org.jsoup.safety.Whitelist")>
<cfdump var="#Whitelist.relaxed()#" />
If you run that you will see setAttributes() expects a string and a string array.
addAttributes(java.lang.String, java.lang.String[])
Given that, you need to do something like:
<cfscript> jsoup = CreateObject("java","org.jsoup.Jsoup"); whitelist = CreateObject("java", "org.jsoup.safety.Whitelist"); html="<div style='font-size:24pt;'>This is BIG text</div>. This is an unwanted script: <script>alert('Boo!')</script>.<br>"; myKeys=["style"]; sanitized = jsoup.clean(html, Whitelist.relaxed().addAttributes(":all" , JavaCast("string[]", myKeys))); WriteOutput("<textarea>#sanitized#</textarea>");</cfscript>

Lync edge server for site with 2500 users

Dear All,
I have a question with regards to the implementation of lync edge server deployment.
One of our client having lync deployment with 4000 users in a central site with 3 FE EE and edge pool with 2 Edge servers, there are planning for a new site with 2500 users.
what will be the best method for the site implementation , shall we deploy a SE Fe server and all the external communication through the Central site Edge server?
or is it required to have a separate pool for site?
please help me

Agree with the others. So, there's two questions, "what will be the best method for the site implementation?" and "is it required to have a separate pool for site?".
The best method I'd suggest is use Enterprise Edition Lync so you can perform pool pairing for resiliency, and have a local edge pool as the others suggested. You have enough users to support this, and with growth you might want to be able to scale
up anyway.
Is it required? Not at all. You can send them all through the central site edge server, it's possible and fully supported. It's up to you, but I'd suggest the separate pool.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Enable and Disabling the Network Adapter with domain user (Standard User)

Hi Guys.
We setup a active directory in our organization. Added client systems(Windows 7 and Windows 8) to the Domain. Domain users are accessing the system with standard users permission. I don't want to give Administrator permissions. But user should able
to Disable and Enable network Adapter without giving the administrator permissions. Please suggest .
Thanks in advance for the help :)

Hi,
According to your description, my understanding is that you want the standard user has the permission to disable/enable network adapter.
I recommend you to implement this function by group policy:
User configuration - Administrative Templates – Network - Network connections
Enable this policy:
Ability to enable/disable a LAN Connection
Besides, you may consider of joining users to Network Configuration Operators Group, detailed information you may reference:
A Description of the Network Configuration Operators Group
http://support.microsoft.com/en-us/kb/297938
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

New to Mac and am asking for help with Safari issue.

I have a Mac book Pro and recently upgraded to 'Lion'. I am having an issue with Safari hiding the area to type in a web address, it seems to hide this feature. It also seems to hide the green, Amber (minimize buttin), and Red (close) icons. I need to know how to reset Safari to its oringinal layout. My 'Guest account is fine and have no idea why the settings have changed in my user account. I was told new software for Safari was available and so attempted to download it, which caused the mac to freeze. I rebooted but this software will still not download without freezing up. If anyone has anyway of walking me through this I would be incredibly gratefull.

In Safari it has no 'Show toolbard" A friend of mine already suggested that. It doesnt have that option. I know that sounds odd. In the guest user I have that option but on my account I dont. I really appreciate you taking the time to answer. Do you have any other ideas on what this might be? When you go up to the top and the arrown 'rolls' over the top on the tool bar the address tab drops down, how to i make its stayopen in this posision?

What is the best way to setup premiere sequence for export when mixing 24fps and 23.976fps for final

What is the best way to setup a premiere sequence for export when mixing 24fps (CG) and 23.976fps (live action) for final output at 23.976 (vimeo and such).
Right now my sequence is at 24fps, and when I export to 23.976, my dialogues seem to shift.
Should I set my sequence at 23.976fps instead of 24fps?
Thanks in advance for the help, and sincere apologies if this is a noob question.
David

That makes it easy. Remove the CGs from the project. Go to Edit>Preferences>Media... and set the Indeterminate Media Timebase to 23.976. Then when you import the image sequence, PP will assign it the correct frame rate.
Edit in a 23.976 sequence.

Mixing latin and kyrillic characters for correspondence with PC User

Similar Messages

Maybe you are looking for