Mixing materials with different Goods Receipt date in the same Storage Unit

Hello everybody,
I´d like to know how  FIFO strategy would affect to this example:
Adding boxes from one storage unit (pallet) to another storage unit (pallet). Both storage units have different goods receipt dates, so there is a pallet which has boxes with different GR dates.
Would FIFO make difference among boxes inside the storage unit?. As far as I know, when adding stock (boxes) to a handling unit (pallet), the system keeps the oldest GR date and does not create new quant number for the incoming boxes
Thanks in advance for your help

Hi Nagesh,
Thank you for the input. I am receiving Stock from vendor and while creating Inbound delivery i created the Handling Unit and also packed it and i could also post it (PG Receipt). Now when i am creating TO i have that error message. The Storage Location where i am receiving is 9001and i have also maintained the partner Storage location,,, its like this Plant(1000)-SLoc(9001)-Partner SLoc(9002).... now the Storage Location 9002 is not HU managed,, the reason i gave this Storage location is, initially i gave 9001, but system said "Storage Location 9001 and 9001 must have different management systems". So now kindly tell me what is the purpose of the partner Storage location and which storage location should i give, as my partner Storage location across "1000-9001-????" thank you again for ur inputs.
Regards,
Samuel

Similar Messages

  • What is the best way to deal with different audio sample rates on the same timeline ?

    what is the best way to deal with different audio sample rates on the same timeline ?

    You don't have to do anything special. If possible, start your project with a clip that has the desired target frame rate and audio sample rate, and your project parameters will be set automatically. Other sample rates will be converted under the covers.
    For example, if your video is shot at 48khz, you can add music files at 44.1khz with no problem.
    If you are recording audio that you want to synch with video (multicam), you will get best results if everything is 48khz, but you can use 44.1 if that is all you have. Once I forgot to reset my Zoom to 48,000 and it still worked.

  • Iphone and ipad are with different carriers, can i use the same apple id on both?

    Hi all,
    I am having some difficulties with setting up my new ipad, i have a different telecommunications carrier for my iphone to my ipad, however my appleID does not allow me to enter another mobile number for my ipad.   When i set up the ipad to my appleID, it automatically registered my iphone # as my contact for messaging.   Is there any way to change the messaging number for the iPad yet still use the same appleID?

    Yes. I use the same Apple ID on four different iDevices. You can sync the contacts with iCloud or with your computer and have them on both devices. You can sync all of the apps as well. If the apps are not in iTunes on your computer - you can download them to the iPad with the same Apple ID. You can also restore the iPad from a backup of the phone to transfer your settings, app data and your contacts.
    iPhone only apps will be half size on the iPad screen but will still work as long - you can enlarge the size of the apps - but they will be pixelated on the screen.

  • Can I have 2 iPhones with different Apple IDs link to the same Photo Stream?

    My husband and I use the same computer and Aperture program.  I set my iPhone up with the Photo Stream from Aperture with no problem but when he set his up, it didn't get the feed of pictures.  We have different apple ID's on our phones?  Can this be done?

    just to add another question to this, can i subscribe to a photo stream, like my mate's?
    i'm guessing no, and that htis wil be a future feature. 
    I've not found any referneces to this anywhere
    much appreciated

  • HT5071 Can more then one person (with different Apple ID's) use the same iBookAuthor Program to Publish (house hold computer)?

    I want to publish my fathers books using iBooks Author.  I'm going to set him up with an Apple ID, but he does not have a computer and I will be publishing it from my personal computer.  I have my own Apple ID and wish to publish my own books using the same program on the same computer.  Will this be an issue? or will I be able to switch Apple ID's upon pushing it to pusblish? 

    I have a free books account and later applied for a paid books account.
    This required setting up a new Apple ID and not using the same email or passwords.
    So  they are two totally separate accounts - on my computer.
    That part is not a problem for you and your father.
    The other aspect is both will need to open an iTunes Connect account for each ID.
    I dont see delivery as a problem.
    The part I am not sure about in your case is iTunes - as I only have me as usuer on the computer its never been an issue, but there is a Family sharing option available.
    The previous post is the best starting point as you will both need separate accounts.

  • Can two iPhones with different iSO get synchronized via the same iTunes?

    Me and my wife have two iPhones 3S, sharing the same iTunes store account, which get usually synchronized via iTune 9.2. Now, I want to upgrade my iPhone to iSO4, while my wife is quite happy to momentarily stay with iSO 3.1.3. The question is will she be able to keep synchronizing her iPhone the old iSO3 way after me downloading (and installing) iSO4 on my iPhone? Need an advice before doing something foolish...

    If you don't want to update your wife's phone, don't update. The OS is NOT part of the itunes sync, other than some apps may only work properly under iOS 4 once developers start updating their apps. You should have no problems doing what you want.

  • How to run stand alone executables developed with different versions of LabView on the same system

    I am using LabVIEW 8.2 to develop a stand alone executable for a target system.  The target system already has a stand alone executable written by another vendor, using LabVIEW 7.1.  I installed the LV RunTime Engine for 8.2 which left the 7.1 engine intact (as it should).  The problem I am now having is that the drivers installed on the target system are incompatible with the NI-DMM vi's that I am using.  My concern is that if I replace the old drivers with the ones I am using on my development platform I may end up breaking the old software.  What would be an appropriate work around to ensure that the target system will be able to run both executables?  (FWIW the system will NOT be running both executables concurrently.)
    The target system is an embedded PXI card cage, running Windows XP, with a NI PXI-4070 DMM (among other instruments, however I have had not had this issue with the NI-DAQmx drivers).

    Hi Yerffejj,
    Thanks for sharing your issue with the community. I am struggling to see what you mean by "break the software." If you only have the two executables and LV Run-Time versions 8.2 & 7.1, then you just need to go to http://www.ni.com/support/ » Drivers and Updates » Search within Results: » enter "NI-DMM" » GO to get the DMM driver you need. To see the driver you were using on the development machine, just go to Measurement & Automation Explorer (MAX). The DMM driver should also automatically install DAQmx, NI-VISA, and NI-IVI, fyi.
    Best wishes to you, and please let us know if that does not solve your problem.
    Regards,
    Dan Richards
    Dan Richards
    Certified LabVIEW Developer

  • Working with different sequence time-bases in the same Project..

    Hi
    My question is specific but hopefully will clear my understanding of how to deal with multiple frame rates in the one project...
    I am supervising a project shot at 23.98 fps native in the DVCPro HD codec and editing in FCP 6.02.
    The editor is cutting scenes in separate sequences.
    Unfortunately they accidentally created a new sequence set for DV-NTSC, 29.97 fps and cut a scene in there. FCP must have prompted them about the mistake when the first clip was added... but they ignored it I guess.
    When the scenes are compiled together in a single sequence (23.98fps) the incorrectly formatted DV one is all messed up size wise and aspect ratio (of course).
    How to fix?
    Here's what I've tried and failed at...
    The source DV sequence can't be reset in itself because I can't change the timebase.....
    If the DV sequence's clips are copied and pasted into a new 23.98 sequence the clips are still the wrong size... and there seems no way to change these attributes.
    I tried exporting an EDL for the DV sequence and reimporting and relinking clips in a new 23.98 sequence... but the DV source has more than 2 Video tracks so EDL transfer won't work.
    XML export/import just duplicates the original DV sized sequence..
    I'm probably missing something .... like well, remake a new sequence correctly and re-edit it! But now I'm interested in what I'm missing here.
    Anyone?
    Thanks
    Lee

    Ahh...been there, done that...
    http://lfhd.blogspot.com/2008/03/first-hiccup.html
    Shane

  • Where to find goods receipt data only working with GR in tcode me23n

    hi,
    I am getting this error 1. Enter Good receipt data only when working with GR-based IV. What can be done for this. how to rectify this error.
    Where can i find the goods receipt data in the transaction Me23n.

    in addtion to above process ,
    u can check @ table level EKBE w.r.f PO number.
    VGABE = 1     Goods receipt
            2     Invoice receipt
    and let us know what u are doing in ME23N.
    FOR GR Tcode is MIGO
    for IN tcode is MIRO.
    Regards
    Prabhu

  • WM LT01 Source BIN# not FIFO on Good-Receipt-Date, instead on QUANT# ?

    Hello,
    Encounterd a strange FIFO logic when doing LT01, the PICKING sequence is based on QUANT# instead of the Good-Receipt-Date.
    Could anyone please help to advise how to fix the problem ?
    PS : YOu may have to give more detail advice as I am not very good in WM.
    I could provide details if required.
    Thank you.

    from http://help.sap.com/erp2005_ehp_03/helpdata/EN/c6/f845874afa11d182b90000e829fbfe/frameset.htm
    Strategy F: FIFO (First In, First Out)
    Use
    With this picking strategy the system proposes the oldest quant in the storage type as the quant that should be transferred.
    The system generally calculates the "age" (length of time in storage) of a quant on the basis of the goods receipt posting date from the Inventory Management (IM) application component. The system automatically sets the goods receipt date in the quant and in the transfer requirement for every goods receipt posting in IM. When the transfer order is created, this date is copied over to the quant record of the destination storage bin.
    You can accept the goods receipt date that the system sets or you can enter a different date. Regardless of whether the system proposes the goods receipt date or you enter a different date, the date is used to calculate the age of the quant. This date influences the sorting sequence for each material.
    Prerequisites
    When you define the storage type record to use this strategy, enter f in the Picking strategy field.

  • Substitution - Baseline Date to be replaced by the Goods Receipt date

    Dear Forum,
    We have the payment terms defined in the system, with the baseline date corresponding to the 'Document Date' and the credit terms as 60 Days. The users now desire that the Baseline Date should instead correspond to the Goods Receipt Date. To enable this we need to define the substitution such as the Baseline Date at the time of Invoice Verification gets substituted by the Goods Receipt Date, if the GR Date is earlier than the IV date.
    Would appreciate help from the friends as to how to configure this and which feilds to be chosen and replaced.
    Thanks!
    Regards,

    Hi
    You can make the Baseline Date in Invoice (MIRO) with Goods Receipt Date using BADI.
    BADI -->MRM_PAYMENT_TERMS
    Tell your ABAP Guy to work on this BADI.
    In the BADI,  MRM_PAYMENT_TERMS Read the Value in WEBUD of Internal Table TI_DRSEG and Pass it into E_ZFBDT.
    Also if the Baseline Date is changed manually, then after posting you can see the Goods Receipt Date in Baseline Date.
    This resolves your issue.
    regards
    venkat

  • Batch search strategy based on goods receipt date

    Hello,
    Can some one help me with setting up Batch search strategy based on goods receipt date currently is on batch number.
    Thanks a lot
    Thanks!
    Best Regards
    Srw

    Hi
    If you want to set up Batch search strategy based on goods receipt date......then you have to create GR Date as one charecteristics in T.Code: CT04 and assign this charecter in Class with respect to class type  023
    Then assign this class in Material Master Classification view..
    Make sure in Material master, Purchasing view...you have activated Batch management active check box....
    Then when ever you do GR in MIGO, In batch tab, In classification field maintain the GR Date..
    Then Create sort sequence in  T.Code: CU70 and you can maintain in what basis ie)in assending or desending GR Date you have to search the batch..
    And then Create Batch Search Statergy in MBC1 and there you assign the sort sequence in Details...
    Now  you do your regular procedings.....the material Batch will be searched based on GR Date...
    Reward if useful
    Regards
    S.Baskaran

  • Mixing Ram with different CAS latencies in K7n2 Delta-L?

    I have been using 512mb Kingston Value Ram in my computer, pc3200, with CAS latency of 3.0.   I just purchased some Corsair value select 512mb ram pc3200 with CAS latency of 2.5.   I know you are not supposed to mix ram with different speeds (like 400 vs. 333) but does it matter if the CAS latencies are different?  
    I'm running an AMD XP 1800+, K7n2 delta-L, nforce2 motherboard from MSI.  Someone at a computer shop told me they tried mixing Kingston 3.0 CAS with Corsair 2.5 CAS, and said his computer wouldn't even post.  So I'm wondering if this is an isolated problem, or you will always run into this problem if you mix ram with different CAS latencies.
        If anyone has experience with this issue, please share with the board.  Thanks!
    Chris

    The age old question, will the components I bought be compatible ? There are those that have bought identical matching memory that didn't work. In my case, I had an ECS K7S5A that used PC2100 Crucial memory, the sticks neither matched (at one time they did, but one stick died and they sent me the closest thing they had.). Neither of these Crucial sticks was identified by a configurator as being compatible with the K7N2 Delta L that I decided to buy. In the end, not only did both sticks work, but I put them in as single channel mode (ram slots 1 & 2), but later changed the configuration to dual channel mode (ram slots 1 & 3, even 2 & 3). It worked flawlessly in all three configurations. Sorry for the long answer, but in essence, there are no guarantees and your worries will drive you crazy. When memory is mixed, you reduce the likelihood of compatibility, even when you go beyond the recommended products that were specifically identified.
    That guy at the computer shop, did he ever indicate or isolate the true reason why the memory wouldn't work ? Maybe, maybe not. I would think with a disparity in memory, the bios is the key to setting the settings for the worst stick of the bunch. Then again, the products you get might overclock to what the better sticks run at. My assumption is that mixed sticks, the bios retards settings to this in "auto" mode. When you force it manually, it may work or it may fail. One thing you oughta know, each and every stick has the manufacturers id encoded onto them at the very least, just like the firmware on other items indicates a manufacturer code and other data that allows these things to be compatible. So know you face that battle going in with any of them. If the bios programming doesn't allow it to work, from that perspective, there'll be problems.

  • Goods receipt date cannot be in the past

    hii
    While doing Po i getting below error
    " Goods receipt date cannot be in the past  "
    How to rectify this ?? and why its occuring ??
    Thanks

    >
    MM group wrote:
    > hii
    >
    > While doing Po i getting below error
    >
    > " Goods receipt date cannot be in the past  "
    >
    > How to rectify this ?? and why its occuring ??
    >
    > Thanks
    Check the error No. If error is standard, then we can change the error message to warning, if the error is ABAP generated, we cannot get it changed. Usually ABAP generated errors are created as per clients requirement and can be changed with client and ABAP consultation.

  • Bill Passing to be done on the rate which is valid on the Goods Receipt Dat

    Dear All,
              My client has a very valid requirement which I am unable to provide. My client is basically a real estate company which is responsible for building. So the purchase cement, Paint etc. as raw material. The market rate of these raw materials varies almost everyday. So they maintain info record for material vendor combination. Then every day they change the price in percentage in MEKP.
              So suppose someone has created a PO on today or 20th July. So system will pick the value from info record whatever is maintained there say Rs10/- . Then suppose on 22nd July market price change to Rs15/- . So they will change the value in info record. Goods receipt against this PO is done on 23rd July .
               After GR they will do Bill passing on say 23rd itself. But system will take Rs10/- as this is the PO value. But my client wants it should take Rs15/- as this is the market price on Goods Receipt Date .
              My question : Can this be done ? Can Bill passing amount take the value from info record condition rate as on the date of goods receipt ?
              Please Reply ...
    Regards
    Abhijit

    Dear,
                   That is a goods point . But is there any provision that this updated price will reflect in MIRO automatically or by a single click . Because anyhow they can change the amount manually in MIRO . But accounts person should not have the authorisation to change the price during MIRO .
                   Price should come from price master or a single click somewhere in MIRO which will update the price to market price .

Maybe you are looking for