Mixing Wave and MIDI output for recording - Windows Record Control limitatio

I am using a SoundBlaster Li've! card with Magix MIDI Studio 2005. When I create a score that combines MIDI tracks with Wave tracks, I cannot record the combined audio stream using an internal recording program like Magix Audio Studio. It all sounds fine over the speakers, but I cannot record what I am hearing.
MIDI Studio and Audio Studio are not aware of each other directly - they appear to use the Windows Play Control and Record Control to set which channel should be used to provide audio to the recording program.
Unfortunately, Windows Record Control does not allow more than one channel to be used as the recording source. If I select MIDI, then Wave is deselected. If I select Wave then MIDI is deselected. I can record each separately, but I cannot sync them, since they don't send SMPTE or anything other than audio across the channel.
Is this reflecting a limitation of the sound card or is there some utility I need to use to override the Windows Record Control? Or is there some program or some hardware feature I need to make sure that the audio output from MIDI and from the Wave source are mixed down to the Wave recording channel?
I have already seen some recommendations to patch the audio out of the sound card to the line in. I am not interested in a solution such as this, since two conversions between digital and analog are bound to degrade the result significantly.
If I need a higher level sound, that's fine, just point me to the right one.
Thanks in advance!

Duplicate thread.
Cat

Similar Messages

I am retired. In my active years, I purchased Adobe Creative Suite 4 Design Standard and Dreamweaver CS5 for my Windows environment. I recently spent a fortune to migrate to Apple. I realize that my licenses are not recognized by Adobe. I am desperate

I am retired. In my active years, I purchased Adobe Creative Suite 4 Design Standard and Dreamweaver CS5 for my Windows environment. I recently spent a fortune to migrate to Apple. I now (and a bite late) realize that my licenses are not recognized by Adobe. I am desperate. I cannot afford the expense of buying or paying access to the software and, still, I need the tools for all those little things I do for enjoyment. What can be done?

The licenses are operating system specific, so one option would be to retain use of the Windows machine you had before the Mac.
If you want to try to use the older stuff on your new Mac you can try installing Windows emulation software such as Bootcamp.

External Midi Plugin and Midi Output Delay

This one is fairly esoteric but has anyone run into the following problem or have a workaround?
I'm trying to incorporate the External midi plugin into my setup so I can use the new midi plugins, but I cannot correctly calibrate my system when using it. My calibration technique invoolves setting delay for each synth to the slowest of the bunch and then compensating for all in the Sync > All Midi Out > Delay preference. However, when you use the external midi plugin this control has no effect. Running the synths as standard midi does work but then you lose the option of using the new midi plugins.
If verified, does anyone know if this issue will be resolved in an update?
Thanks,
David

Pancenter,
Thanks for replying. I haven't had internet in a couple days and I'm back on now. Time Warner Cable is sometimes unstable around my area.
Logic:
I've been trying different things for the last couple days and nothing works.
I replayed and recorded a 4 bar piano part and made sure that the hits were as close to the grid as possible. It sounded fine on MIDI Recording. But on MIDI Playback Here's what I found: The Midi data is not misplaced, it's right where it should be. But the actual sound is delayed on playback.
I have a PreSonus Monitoring Station. The outputs of the Motif go straight into the Traveler (In 5-6). The Main outputs on the Traveler go into the PreSonus Monitoring Station as well as my KRK Monitors. I control the volume from the Monitor Station.
Software Monitoring and Independent Monitoring Level are both enabled.
I don't get it...Please help.

How to push a button, run a report, and open output in new windows?

I have an application where I want to present the user with a form, have them enter their report parameters, and then press a go button. I would then like to display a progress bar. The report will generate both a PDF and HTML output. When the report is complete, I want to display each one of these outputs in their own browser window.
How do I do this?

You want to retrieve two responses? Then you'll have to invoke two requests simultaneously. You can make this possible with a Javascript window.open call in the onclick attribute of the commandButton. E.g.
<h:commandButton
    value="submit"
    action="#{myBean.submit}"
    onclick="window.open('pdfServlet?param1=value1&param2=value2');" />Where the bean action just returns the HTML (JSF) result and the onclick fires a servlet, if neccessary supplied with request parameters so that it knows what PDF it need to generate.

Need drivers for Photosmart D7560, and Scanjet 4370 for both Windows 7 32 bit and 64 bit

I need drivers for my Photosmart D7560 Printer and Scanjet 4370 scanner, for both Windows 7 32 bit, and 64 bit.

Hi, For the printer: http://ftp.hp.com/pub/softlib/software11/COL30216/mp-75048-1/PS_SF_04_D7500_NonNet_Full_Win_WW_130_140.exe For the scaner (no available): http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=457534&swLangOid=8&swEnvOid=4063 Regards.

External mic inputs and speaker outputs for CP-7937G Conf Phone

Has any tried to connect the Polycom® SoundStation IP Multi-Interface to the Cisco Conference Station CP-7937G Phone, it appears to be the only way to get eextra mic inputs and line level outputs for enhancing conference call? See attached Quick Start Guide.

Here's where I am on interfacing external mikes, PCs, speakers, etc. with the Cisco 7937. It seems this I/O port is quite a mystery to both Cisco and the manufacturer (Polycom). There are virtually no technical specs for it anywhere on line. So, I bought a variety of cables and connectors and tried exploring. I could never get anything but input into the 7937 to work. I could never get any output from it despite the output symbol next to the port. Here are the input test results:
3 pole 2.5mm to dual stereo 3.5mm breakout cable didn't work at all
4 pole 2.5mm to stereo 3.5mm for input worked only on one pole (red connection). Half volume?
3 pole 2.5mm to stereo 3.5mm for input works only on white connector (louder?)
3 pole 2.5mm to mono 3.5mm for input, works (louder?)
2 pole 2.5mm to stereo 3.5mm for input, works
2 pole 2.5mm to mono 3.5mm for input ,works, and is simplest.
So, if you want to feed an external audio source into the Cisco 7937, almost any type of 2.5mm male connector cable at the 7937 will work
I could never find any mention of successful use online, and could not find an output signal myself, so I suspect the 7937 was just mislabeled.

What is the Exact and certain way for installing Windows's 8.1 on MacBook Pro retina mid 2014?

There are lots of different comments about installing windows 8.1 on Mbp 2014 via bootcamp when you surf the web.but I want the certain way for doing that without any doubts . If anyone has done this installation successfully please give me a step by step guid. Thanks

Please see Boot Camp 5.1: Frequently asked questions about installing Windows 8 - Apple Support and How to install Windows using Boot Camp - Apple Support.

Mixing latin and kyrillic characters for correspondence with PC User

Hi!
I (Mac, G5 Dual, OS 10.4.6) intend to exchange eMails via Mail with a friend (PC) who can help me to learn Russian. So I have to mix Latin with Kyrillic characters in the same mail. Is there an easy way to do this besides creating and sending pdf-files? Because if I use a kyrillic font he doesn't have the same font - and I am not sure anyway if the font information gets lost when he receives te mail.

Is there an easy way to
do this besides creating and sending pdf-files?
Because if I use a kyrillic font he doesn't have the
same font
Fonts don't matter, only encodings. Just type your message using the US and Russian (or whatever) keyboard layouts and send it. Before sending, it might be best to go to Message > Text Encoding and choose Windows 1251 or KOI-8R. If you don't see these present, go to system prefs/international/langauges and add Russian (in cyrillic) to the list using the Edit button.
For general info see:
http://homepage.mac.com/thgewecke/TypingCyrillic.html

What is the best way to setup premiere sequence for export when mixing 24fps and 23.976fps for final

What is the best way to setup a premiere sequence for export when mixing 24fps (CG) and 23.976fps (live action) for final output at 23.976 (vimeo and such).
Right now my sequence is at 24fps, and when I export to 23.976, my dialogues seem to shift.
Should I set my sequence at 23.976fps instead of 24fps?
Thanks in advance for the help, and sincere apologies if this is a noob question.
David

That makes it easy. Remove the CGs from the project. Go to Edit>Preferences>Media... and set the Indeterminate Media Timebase to 23.976. Then when you import the image sequence, PP will assign it the correct frame rate.
Edit in a 23.976 sequence.

Video output and image output for the iphone4

Hey you guys.
I have a few newbie questions for you iphone gurus.
1st : is it true that even though the iphone 4 displays in 720 res, it will only output at 480 res?
Reason i ask is that when i watch streamed movies on my TV, through my iphone from Netflix, it looks slightly less sharp/clear then when i watch it on the iphone itself.
2nd : When i want to show people pictures i took with my iphone on my TV. I goto the pictures area in the iphone and load the picture. But it does not display on my TV unless i start the slide show. But if i just want to look at one picture, it does not display.
Strange
thanks you guys

You're welcome.
Copied from this link.
http://www.apple.com/iphone/specs.html
Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format.
And it looks like I was mistaken on the output supported when using the Apple Composite AV Cable for a connection to a TV.
Support for 1024 by 768 pixels with Dock Connector to VGA Adapter; 576p and 480p with Apple Component AV Cable; 576i and 480i with Apple Composite AV Cable (cables sold separately).
Looks like the iPhone supports up to 576p/i and 480p/i when using the composite cable connected to a TV.

Ditafm-output.ini and PDF output for different situations

I'm using a DITA 1.2 structured app and templates that I've set up. I'm generally happy with the output that I'm getting now, but I've also come to realize that I have two different situations for PDF output--in situation one, I need to set up for printed books, i.e., facing pages, keeping chapters starting on right-hand pages and so on. Situation two is for electronically-distributed PDFs that are NOT books--files that customers might print themselves, probably not double-sided, so I don't need facing pages with the associated blank pages in the file, and so on.
I'm using flags in the ditafm-output.ini file to control the pagination for the printed book in my output. Both situations currently use the same output templates, though I may create a single-sided template for situation two. That's easy enough.
My question, then, is this: It seems to me that I'll need two different ditafm-output.ini files for the two situations. Is there an easy way to switch between them? Output seems separate from the structured application, and I don't need or want two separate apps.
The best I can think of at the moment is to create a second ditafm-output.ini file with the settings I want for situation two, name it ditafm-output_foo.ini and change it to the "real" name when I need it. This, of course, introduces a potential overwrite disaster. Naturally, I'll keep backups.
Unless there's a better way??

That's the only way I can think of using "default" Frame to support multiple output types. To make it less error-prone you might set up batch files that do the copying .. just run the right batch file before you build each type of book.
OR .. you could use DITA-FMx which lets you define an INI file for each book-build (and provides many more features).
http://leximation.com/dita-fmx/
Cheers,
Scott Prentice
Leximation, Inc.
www.leximation.com

Nokia drive and other apps for other windows phone...

i saw on the net abt the pirated versions of nokia s best gps app being used on other windows phones and with partnership of microsoft will there be nokia apps available officially on the marketplace ..? and m confused between nokia 710 and samsung omnia w.. both priced the same and omnia with front cam but i need the gps navigation for sure more than frnt cam..now the point is if nokia makes their apps available for other devices then no point in buyin any phone in intrest .. i got this doubt coz i read nokia maps coming to other devices and also the EA games ???? pls suggest

I would not bother getting a nokia at the moment.....
If you can live without nokia drive for now then i would hold back for atleast 6 months and see what happens.
Nokia have slipped down the chain a bit and are not as almighty as they use to be.
There are loads of probs with the Lumia 800 and the 710 is not all that good compared to nokia's of old.
I got the 710 because of nokia drive and it is no where near as good as the old Ovi navigation...
In fact the whole phone is a let down....with poor camara, poor sat nav, poor speaker and poor battery...
The Actual phone is a nice design and the screen is not bad...WP7.5 looks interesting but still needs a lot of work to catch up with the others.
Not sure what the Omnia is like...but if i knew then what i know now about the 710 i would of gone for the HTC Radar and just used my N8 for Sat Nav.

Using Apple Digital AV Adapter and sound output for iPad 1

Hi all!
I'm trying to hook up my iPad 1 and iPhone 4 to a projector through HDMI that has very weak speakers. My solution is to hook up the video through HDMI and use my headphone jack or use my device speakers for sound. At first I thought it'd be okay because people on this forum say the headphone jack will still work, but no one that posted these question have an iPad 1, they all had the 2nd gen. Does anyone know if it also works with iPad1 and iPhone 4? i know mirroring won't work on my devices, i'm just looking to use AirVideo and Plex to run my videos.
Thanks in advance!

What apps are you try to dsicplay via TV out? On the iPod TV out only dispays with apps that support TV out. The Video app is one of them.

What are "polling tools" and "centralized maintenance" for a Windows 7 machine?

Hello all.
Can somebody explain to me what "polling tools" are and what they do? What is their purpose? Also may somebody explain what "centralized maintenance" may mean?
Thank you!

Hi,
Could you pleaes tell us more information so we can better know what you mean? When and where do you find the "polling tools" and "centralized maintenance" in Windows 7? A snapshot would be more helpful.
Regarding to the "centralized maintenance", Windows 7 has a built-in maintenance service, performs common maintenance tasks in Windows, just lauch Action Center, you will find it.
More information would be helpful
Yolanda Zhu
TechNet Community Support

Vsftpd: How to mix virtual and local users for pam?

Hello,
I've been stumped on this for many days, hope someone could shed some light for me.
vsftpd.conf
pam_service_name=ftp
local_enable=YES
chroot_local_user=YES
guest_enable=YES
guest_username=virtual
virtual_use_local_privs=YES
/etc/pam.d/ftp
auth sufficient pam_userdb.so db=/etc/vsftpd_login crypt=hash
account sufficient pam_userdb.so db=/etc/vsftpd_login crypt=hash
auth required pam_unix.so
account required pam_unix.so
since /etc/pam.d/vsftpd is missing, I've grabbed some from /etc/pam.d/login
The thing is that, when I login with local user, I got chrooted to virtual home instead. If anyone can give me some advice, that would be great, thanks.

*bump*
cookies for anyone who can answer

Mixing Wave and MIDI output for recording - Windows Record Control limitatio

Similar Messages

Maybe you are looking for