Mkarchroot fails if '/etc/pacman.d/gnupg' does not exist
I had an issue with one of my build boxes yesterday - suddenly my build script, which uses mkarchroot, failed. It failed with the below error:
cp: cannot stat '/etc/pacman.d/gnupg': No such file or directory
When investigating the problem, I discovered that mkarchroot has some new code at the end that invokes locale-gen using a new script called arch-nspawn that has been recently added to devtools (around 2013-05-02). It is arch-nspawn that attempts to copy "/etc/pacman.d/gnupg". If, for whatever reason, the host does not have that directory then the command will fail, which causes mkarchroot to fail.
Previously, mkarchroot worked fine without the presence of "/etc/pacman.d/gnupg" but now it doesn't. I am unsure whether this would be seen as a bug.
This also made me think about the side-effect of copying the host's keyring into the new chroot (which may then end up copied to another host, thus giving two hosts with the same pacman keyring master key). According to this post, that is a bad thing. This isn't an area that I know much so I don't really know how bad that is in reality. I've read about a "pacman-init" service that creates a new key on each boot in a tmpfs but can't find any reference to it in the package repos (or aur).
The other thought I had is that the above means the use of arch-nspawn to enter a pre-existing chroot would cause its keys to be overwritten, which may or may not be desirable. I haven't tried this - it's just a thought.
I encountered the exactly same issue. One can create new GPG-Keys for pacman easily using:
pacman-key --init
But as starfry already suspects I think too, this is actually a bug..
Similar Messages
-
[bumblebee] Failed to load module "nouveau" (module does not exist, 0)
Hello my friends,
bumblebee does not work for me. I installed bumblebee, nvidia, nvidia-utils, mesa-libgl, bbswitch-dkms ...
# lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:04.0 Signal processing controller: Intel Corporation 3rd Gen Core Processor Thermal Subsystem (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
00:1f.6 Signal processing controller: Intel Corporation 7 Series/C210 Series Chipset Family Thermal Management Controller (rev 04)
01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M / GT 620M/625M/630M/720M] (rev a1)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24)
nVidia 620M at PCIBus 01.00.0
First, nvidia is disabled by bbswitch.
# cat /proc/acpi/bbswitch
0000:01:00.0 OFF
Then I execute the command
# optirun -vv glxspheres
[ 505.314018] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 505.315297] [DEBUG]optirun version 3.2.1 starting...
[ 505.315938] [DEBUG]Active configuration:
[ 505.316203] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 505.316421] [DEBUG] X display: :8
[ 505.316552] [DEBUG] LD_LIBRARY_PATH:
[ 505.316674] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 505.316788] [DEBUG] Accel/display bridge: auto
[ 505.316900] [DEBUG] VGL Compression: proxy
[ 505.317014] [DEBUG] VGLrun extra options:
[ 505.317126] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
[ 505.317295] [DEBUG]Using auto-detected bridge virtualgl
[ 506.597122] [INFO]Response: No - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 506.597316] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 506.597448] [DEBUG]Socket closed.
[ 506.597538] [ERROR]Aborting because fallback start is disabled.
[ 506.597654] [DEBUG]Killing all remaining processes.
Now, the nvidia is enabled.
# cat /proc/acpi/bbswitch
0000:01:00.0 ON
# modprobe nvidia
modprobe: FATAL: Module nvidia not found.
/etc/bumblebee/bumblebee.config
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
/etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:01:00:0"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
# BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
What is wrong? Thanks so much for help!Just did a downgrade and it's working again, here are my versions.
linux 3.9.9-1
linux-headers 3.9.9-1
nvidia 319.32-2
nvidia-utils 319.32-1
bbswitch 0.7-4
If you have conflicts, I found it easiest to remove those (bbswitch, virtualbox in my case), downgrade linux and then install the appropriate bbs/vb packages -
ORA-12545: Connect failed because target host or object does not exist(EBS)
Hi All,
We are using Oracle EBS R12 on Linux x86 Enterprise Server.
We have installed vision database (both apps and db on same machine)
Host name: ERPDEV
IP:192.168.1.211
We can connect from client machines to our database using sqlplus i.e.
sqlplus apps/****@vision
Similarly tnsping is also successfully returning results.
Also following commands are returning results
ping erpdev
ping 192.168.1.211
ping erpdev.domainname.com
All above commands are running fine.
However we are trying to create new "Legal Address Entry" through "Legal Entry Manager". After filling all the details like Location,Country,City etc, when I push the apply button, getting following error messages:
ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1674 ORA-12545: Connect failed because target host or object does not exist in Package xle_legal_address_swi Procedure create_legal_address
I dont know why this ORA-12545 error is occuring through application although all of the above tests are running fine from client terminals.
Do any one have any solution for this???
Thanks
FarooqHi,
I really am new to this application.
I could not get this document.
Can you pls guide me, how can i fix this problem.
It's really imp to me to fix this.
--Satish -
ORA-12545: Connect failed because target host or object does not exist
Hey Guys,
I know this particular query has been pinging around for ages now, but i cannot seem to get a good answer from anywhere :)
Oracle 10g Database RAC installation- installed/ and running
Oracle 10g Client on different box.
Problem:
[user@myserver ~]$ sqlplus
SQL*Plus: Release 10.2.0.3.0 - Production on Fri Apr 4 16:14:11 2008
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Enter user-name: user
Enter password:
ERROR:
ORA-12545: Connect failed because target host or object does not exist
All env variables are set in user .profile:
export ORACLE_HOME=/space/oracle/oracle/product/10.2.0/client_1
export ORACLE_SID=MSRAC
PATH=$PATH:$ORACLE_HOME/bin:$JAVA_HOME/bin
export PATH
Full contents of tnsnames.ora on client machine:
LISTENER_ORCLTELE =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
ORCLTELE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcltele)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
MSRAC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.12)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.13)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MSRAC)
(failover_mode =
(type=select)
(method=basic)
(retries=180)
(delay=5))
I am not sure if the first 3 connection entries are even needed in here, are they?
The last entry is the connect info for the live database.
What buggs me is that this works:
[user@myserver ~]$ sqlplus 'user/user@msrac'
SQL*Plus: Release 10.2.0.3.0 - Production on Fri Apr 4 16:19:40 2008
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Release 10.2.0.3.0 - 64bit Production
With the Real Application Clusters option
SQL>quit
BTW: This is the error catpured in sqlnet.log
Fatal NI connect error 12545, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/space/oracle/oracle/product/10.2.0/client_1/bin/oracle)(ARGV0=oracleMSRAC)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')(DETACH=NO))(CONNECT_DATA=(CID=(PROGRAM=sqlplus)(HOST=myserver.me.com)(USER=user))))
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.3.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
Time: 04-APR-2008 16:14:16
Tracing not turned on.
Tns error struct:
ns main err code: 12545
TNS-12545: Connect failed because target host or object does not exist
ns secondary err code: 12560
nt main err code: 515
TNS-00515: Connect failed because target host or object does not exist
nt secondary err code: 2
nt OS err code: 0
I have a funny feeling that the problem lies with either:
PROTOCOL=beq
and/or
ARGV0=oracleMSRAC
I have tried everything to remedy this, this is why i am now turning to you guys.
Any and all help is always greatly appreciated.
RobertHi Guys,
Thank you both for your responses, my findings are as follows:
1. HOST=X.X.COM, ensure host is reachable : PING works and host(s) are reachable.
2. In RAC Env, ensure TNS Name is correctly spelled, spelling fine, i can connect with the tns name (is TNS name same as SERVICE_NAME?) by: sqlplus 'user/user@racenv'; but my efforts still will not allow me to use:
sqlplus 'user/user' it tells me that the host or object is does not exist, does this refer to the actual physical machine or the service name, or the instance name?
All host entries in my tnsnames.ora file refer to the vip addresses of both servers holding the rac installation, and both are resolved just fine, testing with ping; any other way to test this?
tnsnames file contains CONNECTION strings in the following order (does the listener entry need to be in the file? on the machine that i am trying to connect from?):
LISTENER_ORCLTELE =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
ORCLTELE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.9)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcltele)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
I tried removing all entries but the entry for MSRAC, but still no joy:
MSRAC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.12)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.3.13)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MSRAC)
(failover_mode =
(type=select)
(method=basic)
(retries=180)
(delay=5))
Thanks again,
Robert..
In the sqlnet.log file the error is as follows:
Fatal NI connect error 12545, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=beq)(PROGRAM=/space/oracle/oracle/product/10.2.0/client_1//bin/oracle)(ARGV0=oracleMSRAC)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')(DETACH=NO))(CONNECT_DATA=(CID=(PROGRAM=sqlplus)(HOST=x.x.com)(USER=oracle))))
VERSION INFORMATION:
TNS for Linux: Version 10.2.0.3.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.3.0 - Production
Time: 07-APR-2008 11:03:12
Tracing not turned on.
Tns error struct:
ns main err code: 12545
TNS-12545: Connect failed because target host or object does not exist
ns secondary err code: 12560
nt main err code: 515
TNS-00515: Connect failed because target host or object does not exist
nt secondary err code: 2
nt OS err code: 0
It mentions PROTOCOL=BEQ, this should be TCP, is there a way to enforce TCP or disable BEQ??
Rob
Message was edited by:
DobSun -
Get ORA-12545: Connect failed because target host or object does not exist
Hi all,
My database is in RAC on a RHEL 5 and oracle 10.2.0.4 release, when i connect from client at the first time it's connected and after exit and connect again it gives the error ORA-12545: Connect failed because target host or object does not exist. and trying to tnsping i can reach the server and connect again it's connected and after disconnect and reconnect it gives the same error.
Here is my tnsnames from windows client:
CDRMGRAC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.116)(PORT = 1522))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.117)(PORT = 1522))
(LOAD_BALANCE = yes)
(FAILOVER = ON)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = cdrmg)
In this tnsnames , i'm using the virtual ip address.
Thanks for your help
Lucienothi,
check the ping trace.. for how long the connection establish..
check whether its breaking ,.
regards,
Deepak -
Connect failed because target host or object does not exist
Hello,
I've installed XE 10.2 under Fedora Core 7 from the downloaded .rpm. The RPM installs fine, and I've run the config from the command line. I've edited my bash file to load the environment variables. Here's my hosts file:
xxx.xxx.xxx.xxx hostname hostname.domain
127.0.0.1 localhost.localdomain localhost
When I start the oracle-xe service from the services interface, I get this:
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 20-JUL-2007 14:49:01
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=XXXX.XXXX)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
with the HOST name filled in. None of the messages I've searched though on this forum relate to this error. Any help would be greatly appreciated.
-B
ps. I'm running this on my local machine.Thanks! that got most of my listener up and running. I now get this:
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 24-JUL-2007 09:01:31
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 24-JUL-2007 09:01:31
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XE" has 1 instance(s).
Instance "XE", status BLOCKED, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "XE", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
I performed a quick search on the forum and then tried this:
SQL> connect / as sysdba
Connected.
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01507: database not mounted
SQL> alter database mount;
alter database mount
ERROR at line 1:
ORA-00205: error in identifying control file, check alert log for more info
I checked the log file and it shows this:
Fri Jul 20 11:14:17 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 11:14:17 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_5332.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 5332
Fri Jul 20 11:14:18 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 11:14:18 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_5334.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 5334
Fri Jul 20 11:14:19 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 11:14:19 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_5341.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 5341
Fri Jul 20 11:14:20 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 11:14:20 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_5360.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 5360
Fri Jul 20 13:47:47 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 13:47:47 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_7963.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 7963
Fri Jul 20 13:48:41 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 13:48:41 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_8332.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 8332
Fri Jul 20 13:49:32 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 13:49:32 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_8671.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 8671
Fri Jul 20 13:50:51 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 13:50:51 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_8708.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 8708
Fri Jul 20 14:15:44 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 14:15:44 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_9214.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 9214
Fri Jul 20 14:27:16 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 14:27:16 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_9688.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 9688
Fri Jul 20 14:32:26 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
Fri Jul 20 14:32:26 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_9828.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 9828
Fri Jul 20 14:40:39 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
MMAN started with pid=4, OS id=2232
PSP0 started with pid=3, OS id=2230
PMON started with pid=2, OS id=2228
DBW0 started with pid=5, OS id=2234
LGWR started with pid=6, OS id=2236
CKPT started with pid=7, OS id=2238
SMON started with pid=8, OS id=2240
RECO started with pid=9, OS id=2242
CJQ0 started with pid=10, OS id=2244
MMON started with pid=11, OS id=2246
Fri Jul 20 14:40:41 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2248
Fri Jul 20 14:40:41 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Jul 20 14:40:42 2007
ALTER DATABASE MOUNT
Fri Jul 20 14:40:42 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Fri Jul 20 14:40:45 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Mon Jul 23 08:23:17 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=2228
PSP0 started with pid=3, OS id=2230
MMAN started with pid=4, OS id=2232
DBW0 started with pid=5, OS id=2234
LGWR started with pid=6, OS id=2236
CKPT started with pid=7, OS id=2238
SMON started with pid=8, OS id=2240
RECO started with pid=9, OS id=2242
CJQ0 started with pid=10, OS id=2244
MMON started with pid=11, OS id=2246
Mon Jul 23 08:23:19 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2248
Mon Jul 23 08:23:19 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Mon Jul 23 08:23:20 2007
ALTER DATABASE MOUNT
Mon Jul 23 08:23:20 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Mon Jul 23 08:23:23 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Mon Jul 23 08:28:52 2007
Starting ORACLE instance (normal)
Mon Jul 23 14:22:36 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=2226
PSP0 started with pid=3, OS id=2228
MMAN started with pid=4, OS id=2230
DBW0 started with pid=5, OS id=2232
LGWR started with pid=6, OS id=2234
CKPT started with pid=7, OS id=2236
SMON started with pid=8, OS id=2238
RECO started with pid=9, OS id=2240
CJQ0 started with pid=10, OS id=2242
MMON started with pid=11, OS id=2244
Mon Jul 23 14:22:38 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2246
Mon Jul 23 14:22:38 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Mon Jul 23 14:22:39 2007
ALTER DATABASE MOUNT
Mon Jul 23 14:22:39 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Mon Jul 23 14:22:42 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Tue Jul 24 08:05:53 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PSP0 started with pid=3, OS id=2235
MMAN started with pid=4, OS id=2237
PMON started with pid=2, OS id=2233
DBW0 started with pid=5, OS id=2239
LGWR started with pid=6, OS id=2241
CKPT started with pid=7, OS id=2243
SMON started with pid=8, OS id=2245
RECO started with pid=9, OS id=2247
CJQ0 started with pid=10, OS id=2249
MMON started with pid=11, OS id=2251
Tue Jul 24 08:05:55 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2253
Tue Jul 24 08:05:55 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Tue Jul 24 08:05:56 2007
ALTER DATABASE MOUNT
Tue Jul 24 08:05:56 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 08:05:59 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Shutting down instance: further logons disabled
Tue Jul 24 08:16:25 2007
Stopping background process CJQ0
Tue Jul 24 08:16:25 2007
Stopping background process MMNL
Tue Jul 24 08:16:26 2007
Stopping background process MMON
Tue Jul 24 08:16:27 2007
Shutting down instance (immediate)
License high water mark = 1
Tue Jul 24 08:16:27 2007
Stopping Job queue slave processes
Tue Jul 24 08:16:27 2007
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Tue Jul 24 08:16:29 2007
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Tue Jul 24 08:16:31 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=3340
PSP0 started with pid=3, OS id=3342
MMAN started with pid=4, OS id=3344
DBW0 started with pid=5, OS id=3346
LGWR started with pid=6, OS id=3348
CKPT started with pid=7, OS id=3350
SMON started with pid=8, OS id=3352
RECO started with pid=9, OS id=3354
CJQ0 started with pid=10, OS id=3356
MMON started with pid=11, OS id=3358
Tue Jul 24 08:16:31 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=3360
Tue Jul 24 08:16:31 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Tue Jul 24 08:16:32 2007
ALTER DATABASE MOUNT
Tue Jul 24 08:16:32 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 08:16:32 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Tue Jul 24 08:38:07 2007
Starting ORACLE instance (normal)
Tue Jul 24 08:43:09 2007
Starting ORACLE instance (normal)
Tue Jul 24 08:49:39 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=2224
PSP0 started with pid=3, OS id=2226
MMAN started with pid=4, OS id=2228
DBW0 started with pid=5, OS id=2230
LGWR started with pid=6, OS id=2232
CKPT started with pid=7, OS id=2234
SMON started with pid=8, OS id=2236
RECO started with pid=9, OS id=2238
CJQ0 started with pid=10, OS id=2240
MMON started with pid=11, OS id=2242
Tue Jul 24 08:49:41 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=2244
Tue Jul 24 08:49:41 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Tue Jul 24 08:49:42 2007
ALTER DATABASE MOUNT
Tue Jul 24 08:49:42 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 08:49:42 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Shutting down instance: further logons disabled
Tue Jul 24 08:51:39 2007
Stopping background process CJQ0
Tue Jul 24 08:51:39 2007
Stopping background process MMNL
Tue Jul 24 08:51:40 2007
Stopping background process MMON
Tue Jul 24 08:51:41 2007
Shutting down instance (immediate)
License high water mark = 1
Tue Jul 24 08:51:41 2007
Stopping Job queue slave processes
Tue Jul 24 08:51:41 2007
Job queue slave processes stopped
Waiting for shared server 'S003' to die
All dispatchers and shared servers shutdown
Tue Jul 24 08:51:42 2007
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Tue Jul 24 08:51:45 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=3070
PSP0 started with pid=3, OS id=3072
MMAN started with pid=4, OS id=3074
DBW0 started with pid=5, OS id=3076
LGWR started with pid=6, OS id=3078
CKPT started with pid=7, OS id=3080
SMON started with pid=8, OS id=3082
RECO started with pid=9, OS id=3084
CJQ0 started with pid=10, OS id=3086
MMON started with pid=11, OS id=3088
Tue Jul 24 08:51:45 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=3090
Tue Jul 24 08:51:45 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Tue Jul 24 08:51:45 2007
ALTER DATABASE MOUNT
Tue Jul 24 08:51:45 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 08:51:45 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Tue Jul 24 09:00:41 2007
alter database open
ORA-1507 signalled during: alter database open...
Tue Jul 24 09:00:54 2007
Starting ORACLE instance (normal)
Tue Jul 24 09:01:02 2007
alter database open
Tue Jul 24 09:01:02 2007
ORA-1507 signalled during: alter database open...
Tue Jul 24 09:01:21 2007
Shutting down instance: further logons disabled
Tue Jul 24 09:01:21 2007
Stopping background process CJQ0
Tue Jul 24 09:01:21 2007
Stopping background process MMNL
Tue Jul 24 09:01:22 2007
Stopping background process MMON
Tue Jul 24 09:01:23 2007
Shutting down instance (immediate)
License high water mark = 2
Tue Jul 24 09:01:23 2007
Stopping Job queue slave processes
Tue Jul 24 09:01:23 2007
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Tue Jul 24 09:01:29 2007
PMON failed to acquire latch, see PMON dump
Tue Jul 24 09:01:29 2007
ALTER DATABASE CLOSE NORMAL
Tue Jul 24 09:01:29 2007
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Tue Jul 24 09:01:31 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__large_pool_size = 0
sga_target = 608174080
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 440401920
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 201850880
PMON started with pid=2, OS id=3682
PSP0 started with pid=3, OS id=3684
MMAN started with pid=4, OS id=3686
DBW0 started with pid=5, OS id=3688
LGWR started with pid=6, OS id=3690
CKPT started with pid=7, OS id=3692
SMON started with pid=8, OS id=3694
RECO started with pid=9, OS id=3696
CJQ0 started with pid=10, OS id=3698
MMON started with pid=11, OS id=3700
Tue Jul 24 09:01:31 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=3702
Tue Jul 24 09:01:31 2007
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Tue Jul 24 09:01:31 2007
ALTER DATABASE MOUNT
Tue Jul 24 09:01:31 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 09:01:31 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
Tue Jul 24 09:01:57 2007
alter database open
ORA-1507 signalled during: alter database open...
Tue Jul 24 09:02:47 2007
alter database mount
Tue Jul 24 09:02:47 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Tue Jul 24 09:02:47 2007
ORA-205 signalled during: alter database mount...
I checked the /usr/lib/oracle/xe/oradata/XE/ directory, and there is nothing in that file...
I am also concerned about these lines near the top of the log:
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths -
TNS-12545: Connect failed because target host or object does not exist
Hi all, I have a bit of a problem, I have gone thru the posts and tried out suggestions but it didn't work. When i type in
LSNRCTL> services
I get this error:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=mattlek2)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.1.162.8)(PORT=1521)))
TNS-01189: The listener could not authenticate the user
When I type in : LSNRCTL> start
I get this:
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.1.0.2.0 - Production
System parameter file is C:\oracle\product\10.1.0\Db_2\network\admin\listener.ora
Log messages written to C:\oracle\product\10.1.0\Db_2\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=mattlek2.ifactory.co.za)(PORT=1521)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.1.162.8)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 49: Unknown error
This is my tnsnames.ora file:
# tnsnames.ora Network Configuration File: C:\oracle\product\10.1.0\Db_2\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
GPGWL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.1.162.8)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = GPGWL)
ORCL_LIVE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 196.36.116.218)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
APPS =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 196.36.116.219)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = VIS)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
EXEL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.1.162.8)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = idev)
EXEL_IDEV =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.1.162.8)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = idev)
This is my listener.ora file:
# listener.ora Network Configuration File: C:\oracle\product\10.1.0\Db_2\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = GPGWL)
(ORACLE_HOME = C:\oracle\product\10.1.0\Db_2)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = mattlek2)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.1.162.8)(PORT = 1521))
Any help would be greatly appreciated.
Thank youjust check the string key it should be
key=extproc_for_xe
Try -
(SOLVED) Pacman error: GPGME does not exist
Hi, I have also just been struck with the same issue - a broken pacman (and for no reason that I can fathom). Was working perfectly yesterday and all I did that wan't usual was to uninstall clamav.
Anyway, I have read this post and done a pacman -Syy, which upgraded core and archlinuxfr only. I then ran pacman -Syu and received this:
[grant@ARCH ~]$ sudo pacman -Syy
[sudo] password for grant:
error: GPGME error: No data
error: GPGME error: No data
error: GPGME error: No data
:: Synchronizing package databases...
error: failed retrieving file 'core.db' from mirror.aarnet.edu.au : Connection time-out
core 106.2 KiB 353K/s 00:00 [######################] 100%
error: GPGME error: No data
error: failed to update extra (invalid or corrupted database (PGP signature))
error: GPGME error: No data
error: failed to update community (invalid or corrupted database (PGP signature))
error: GPGME error: No data
error: failed to update multilib (invalid or corrupted database (PGP signature))
archlinuxfr 30.3 KiB 81.9K/s 00:00 [######################] 100%
error: database 'extra' is not valid (invalid or corrupted database (PGP signature))
error: database 'community' is not valid (invalid or corrupted database (PGP signature))
error: database 'multilib' is not valid (invalid or corrupted database (PGP signature))
[grant@ARCH ~]$
Should I do a reinstall of pacman using the CD? I know this is clumsy, but anything I have missed?
Last edited by mcduling (2012-12-03 06:43:56)Here is my pacman.conf in separate screens:
GNU nano 2.2.6 File: /etc/pacman.conf
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
#GPGDir = /etc/pacman.d/gnupg/
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
GNU nano 2.2.6 File: /etc/pacman.conf
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/curl -C - -f %u > %o
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options
#UseSyslog
#UseDelta
#TotalDownload
CheckSpace
GNU nano 2.2.6 File: /etc/pacman.conf
#TotalDownload
CheckSpace
#VerbosePkgLists
# By default, pacman accepts packages signed by keys that its local keyring
# trusts (see pacman-key and its man page), as well as unsigned packages.
#SigLevel = Optional TrustedOnly
# NOTE: You must run `pacman-key --init` before first using pacman; the local
# keyring can then be populated with the keys of all official Arch Linux
# packagers with `pacman-key --populate archlinux`.
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
GNU nano 2.2.6 File: /etc/pacman.conf
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
GNU nano 2.2.6 File: /etc/pacman.conf
#[testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[core]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
[extra]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
#[community-testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[community]
SigLevel = PackageRequired
GNU nano 2.2.6 File: /etc/pacman.conf
[community]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
# If you want to run 32 bit applications on your x86_64 system,
# enable the multilib repositories as required here.
#[multilib-testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[multilib]
#SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
[archlinuxfr]
Server = http://repo.archlinux.fr/$arch
# An example of a custom package repository. See the pacman manpage for
GNU nano 2.2.6 File: /etc/pacman.conf
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#SigLevel = Optional TrustAll
#Server = file:///home/custompkgs -
Hello ,
I am trying to install siebel out of the box with unicode and multilingual configuration. But my setup fails at dbsrvr configuration.
UpgradeLog UpgradeInfo 3 0000000251cc5fdc:0 2013-06-27 11:00:10 Status Message (Executing SQL statements in file /global/u10/globpoc/
siebel/dbsrvr/oracle/set_unicode.sql ...)
Trace Trace 3 0000000251cc5fdc:0 2013-06-27 11:00:10 Unable to open file 'set_unicode.sql'.
UpgradeLog UpgradeError 1 0000000251cc5fdc:0 2013-06-27 11:00:10 Error in function UTLStartSqlStmtAPI
UpgradeLog UpgradeError 1 0000000251cc5fdc:0 2013-06-27 11:00:10 Error executing statement () in file (set_unicode.sql).
UpgradeLog UpgradeInfo 3 0000000251cc5fdc:0 2013-06-27 11:00:10 Close database connection.
UpgradeLog UpgradeError 1 0000000251cc5fdc:0 2013-06-27 11:00:10 Execute SQL file action failed.
UpgradeLog UpgradeError 1 0000000251cc5fdc:0 2013-06-27 11:00:10 Error executing action (Set system pref for Unicode DB).
UpgradeLog UpgradeInfo 3 0000000251cc5fdc:0 2013-06-27 11:00:10 Status Message (Errors encountered)
globpoc$
this file set_unicode.sql does not exist under /siebel/dbsrvr/oracle folder in solaris. Does anyone have any ideas or has faced similar issue?
trying to install siebel on Solaris SPARC 64 bit, Oracle 11.2.0.3, siebel 8.1.1.10, unicode db, multilingual install.Hello ,
I am trying to install siebel out of the box with unicode and multilingual configuration. But my setup fails at dbsrvr configuration.
UpgradeLog UpgradeInfo 3 0000000251cc5fdc:0 2013-06-27 11:00:10 Status Message (Executing SQL statements in file /global/u10/globpoc/
siebel/dbsrvr/oracle/set_unicode.sql ...)
Trace Trace 3 0000000251cc5fdc:0 2013-06-27 11:00:10 Unable to open file 'set_unicode.sql'.
UpgradeLog UpgradeError 1 0000000251cc5fdc:0 2013-06-27 11:00:10 Error in function UTLStartSqlStmtAPI
UpgradeLog UpgradeError 1 0000000251cc5fdc:0 2013-06-27 11:00:10 Error executing statement () in file (set_unicode.sql).
UpgradeLog UpgradeInfo 3 0000000251cc5fdc:0 2013-06-27 11:00:10 Close database connection.
UpgradeLog UpgradeError 1 0000000251cc5fdc:0 2013-06-27 11:00:10 Execute SQL file action failed.
UpgradeLog UpgradeError 1 0000000251cc5fdc:0 2013-06-27 11:00:10 Error executing action (Set system pref for Unicode DB).
UpgradeLog UpgradeInfo 3 0000000251cc5fdc:0 2013-06-27 11:00:10 Status Message (Errors encountered)
globpoc$
this file set_unicode.sql does not exist under /siebel/dbsrvr/oracle folder in solaris. Does anyone have any ideas or has faced similar issue?
trying to install siebel on Solaris SPARC 64 bit, Oracle 11.2.0.3, siebel 8.1.1.10, unicode db, multilingual install. -
Ora:12545 connect failed bcoz target host or object does not exist
hi
I am facing strage issue with oracle 11g R2 (11.2.0.1) RAC it is installed pefactly
I have configured scan.
and i am able to see the output for the srvctl status for scan
# ./srvctl status listener
Listener LISTENER is enabled
Listener LISTENER is running on node(s): jkvatdb1,jkvatdb2
# ./srvctl status scan_listener
SCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node jkvatdb2
SCAN Listener LISTENER_SCAN2 is enabled
SCAN listener LISTENER_SCAN2 is running on node jkvatdb1
SCAN Listener LISTENER_SCAN3 is enabled
SCAN listener LISTENER_SCAN3 is running on node jkvatdb1
$ lsnrctl service LISTENER_SCAN1
LSNRCTL for HPUX: Version 11.2.0.1.0 - Production on 26-DEC-2010 20:41:34
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN1)))
Services Summary...
Service "jkvatdb" has 2 instance(s).
Instance "jkvatdb1", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:13 refused:0 state:ready
REMOTE SERVER
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=jkvatdb1-vip)(PORT=1521)))
Instance "jkvatdb2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:7 refused:0 state:ready
REMOTE SERVER
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=jkvatdb2-vip)(PORT=1521)))
Service "jkvatdbXDB" has 2 instance(s).
Instance "jkvatdb1", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:2046 state:ready
DISPATCHER <machine: jkvatdb1, pid: 4259>
(ADDRESS=(PROTOCOL=tcp)(HOST=jkvatdb1)(PORT=49754))
Instance "jkvatdb2", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:2046 state:ready
DISPATCHER <machine: jkvatdb2, pid: 4167>
(ADDRESS=(PROTOCOL=tcp)(HOST=jkvatdb2)(PORT=49709))
The command completed successfully
$
from server i can get connect to the database and sqlplus fine
from client i can get tnsping but not able to connect to thru sqlplus or any third party tool.
My client version is 10g release 1
please help me to short out this.
Thanks
ShefaliYour client do not "see" server actually.Does from client ping <server> or tnsping servicename commands work?
-
Hi All,
Please find below ora error
ORA-20011: Approximate NDV failed..ORA-06564: object WRR_LPD23678 does not exist...
I got it from the alert log
Please let me know ...How to fix this issue...
Thanks
Pavan LAn error is for instance hit in dbms_stats.gather_table_stats for an
external table without its directory (external tables are excluded
when gathering statistics at database/schema level).>
OWNER TABLE_NAME DEFAULT_DIRECTORY_NAME
SYS xxxxxxxxxxxxxxxxxxxxx WRR_LPD23678BTW, what is your DB version? if it is already 11g the note mentioned as it is fixed in next version.
Or you can raise an SR too. -
Bumblebee complains that nouveau does not exist (using nvidia)?
I'm trying to get bumblebee working with the nvidia driver. Nouveau is not installed and the driver is set to "nvidia" in /etc/bumblebee/bumblebee.conf. For some reason I'm getting the following error:
[ 1435.391816] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)
Here is the full output of optirun -vv glxgears --info :
[ 506.838977] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 506.839573] [INFO]Configured driver: nvidia
[ 506.839939] [DEBUG]optirun version 3.2 starting...
[ 506.840004] [DEBUG]Active configuration:
[ 506.840025] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 506.840045] [DEBUG] X display: :8
[ 506.840064] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
[ 506.840082] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 506.840101] [DEBUG] Accel/display bridge: auto
[ 506.840120] [DEBUG] VGL Compression: proxy
[ 506.840132] [DEBUG] VGLrun extra options:
[ 506.840143] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
[ 506.840175] [DEBUG]Using auto-detected bridge primus
[ 507.012729] [INFO]Response: No - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 507.012746] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 507.012752] [DEBUG]Socket closed.
[ 507.012767] [ERROR]Aborting because fallback start is disabled.
[ 507.012773] [DEBUG]Killing all remaining processes.
/etc/bumblebee/bumblebee.conf looks like this:
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
Any ideas?
Thanks,
H.click
-
Profile profile_name does not exist
I've got a fresh install and I can get my wireless up and running by commands.
ifconfig eth0 up
iwconfig eth0 essid mywlan
wpa_supplicant...
dhcpcd eth0
and as the Network_tutorial suggests, I created a mhrwlan file in /etc/network.d/ with the following content:
CONNECTION="wireless"
INTERFACE=eth
SCAN="yes"
SECURITY="wpa"
ESSID=mywlan
KEY="SomePasskey"
IP="dhcp"
but after issuing:
netcfg /etc/network.d/mhrwlan
I get :
Profile "/etc/network.d/mhrwlan" does not exist
Please tell me what's wrong.
RegardsThanx, it did the trick, But could you also tell me where exactly should I invoke this command to avoid running it each time the computer boots up?
should I put it in /etc/rc.local or sth?
Last edited by mahan_h (2009-03-18 06:05:41) -
RDS Gateway + Smart Card Error [ The specified user name does not exist.]
I have the following Windows Server 2008 R2 servers:
addsdc.contoso.com, AD DS Domain Controller for contoso.com
adcsca.contoso.com, AD CS Enterprise CA, CDPs/AIAs published externally.
fileserver.contoso.com, RDS Session Host for Administration enabled
rdsgateway.contoso.com, RDS Gateway enabled
tmgserver.contoso.com, 'Publishing' rdsgateway.contoso.com but with pass-through authentication
And the following Windows 7 PCs:
internalclient.contoso.com
externalclient.fabrikam.com
There's no trust between the domains, the external client is completely separate on the internet but the CA certificate for contoso.com has been installed in the trusted Root CA store. All servers have certificates for secure RDP.
I enrolled for a custom 'Smart Card Authentication' certificate with Client Authentication and Smart Card Logon EKUs from the CA, stored on my new Gemalto smart card using the Microsoft Base Smart Card CSP.
From internalclient.contoso.com, I can RDP to fileserver.contoso.com
using the smart card just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using a username and password just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using the smart card to authenticate to the gateway, and a username and password to authenticate to the end server, just fine.
BUT from when using a smart card to authenticate to the end server via the gateway, it fails with:
The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support.
When I move the client into the internal network and try the connection again (still via the RDS Gateway), it works fine - the only thing I can think of is being outside the network and not being able to contact the AD DS DC for Kerberos is causing the issue
- but I'm pretty sure this is a supported scenario?
The smart card works fine internally, the subject of the certificate is the user's common name (John Smith) and the only SAN is
[email protected] which matches the UPN of the user account as it was auto-enrolled.
Does anyone have any ideas?I had a similar issue where I am using a smart card through a Remote Desktop Gateway. I had to disable Network Level Authentication (NLA) on the destination Remote Desktop Server. If anyone has another way around this, I'd appreciate hearing it. I'd prefer
to use NLA. -
PowerDNS 3.2-5 is having some issues connecting to my backend database (sqlite3).
beta powerdns # tail /var/log/errors.log
May 7 20:12:41 localhost pdns[19098]: Caught an exception instantiating a backend: Unable to launch gsqlite3 connection: SQLite database '/etc/powerdns/database.sqlite' does not exist yet
But when i do:
beta powerdns # sqlite3 /etc/powerdns/database.sqlite
SQLite version 3.7.16.2 2013-04-12 11:52:43
Enter ".help" for instructions
Enter SQL statements terminated with a ";"
sqlite> select * from domains;
1|<myhostname>|||NATIVE||
sqlite>
sqlite3 It fetches the records and domains to my liking but not PowerDNS.
Same thing goes for a blank db without any domains or records, i can query it but not PowerDNS.
Followed this guide in order to setup the proper tables and columns: http://doc.powerdns.com/html/gsqlite.html#idp9379264
(without the DNSSEC part, i'll give that a go later on)
It obviously loads the sqlite3 module, and tries to connect to the backend, which doesn't work, so the ArchLinux package is fine i'm guessing.
More info:
* Link to package: https://www.archlinux.org/packages/comm … 6_64/pdns/
* chmod == 777
* chown == nobody:nobody (and tried root:root as default)
* running as root (not pdns)
Last edited by Torxed (2013-05-08 10:52:05)Solved it.
The guides are vague in this regard but once you've just read the config twice you'll understand the logic.
First of all, no absolute paths for sqlite3, it should be:
launch=gsqlite3
gsqlite3-database=database.sqlite
Secondly, find your chroot, and point it to your database location or put your database here (whichever):
chroot=/var/empty
The folder structure should be:
/var/empty/database.sqlite
And this py pointing to ./database.sqlite when starting sqlite3 in pdns, it should be able to lock on to the database.
Peachy!
Maybe you are looking for
-
For admin access how can I change my password if I don't know my password?
I have a new Powerbook G4 (OS X 10.4.2) and want to install Office:mac software. I am the only user for this computer, and under Accounts I am listed as the Administrator. I don't recall ever entering a password when I first set up my computer. So, n
-
How can I get back my Apple ID? Nothing works!
Someone stole it or hack it! Not even my info or email works to get it back! Does somebody knows?
-
Deleting unwanted Maps in Import Manager
Hello All, I wanted to the steps to be delete unwanted maps from the import manager. Regards Sathya
-
Copied a DVD, can I now use that .cdr file in iDVD?
Hi, I've copied a clip on from a DVD using disk utility and it worked fine. I now have a .cdr file. Can I burn that .cdr clip, along with a few others, onto another DVD using iDVD? I'm struggling to work it out. Thanks!
-
Password is not reginized custer service
My password i used to setup this account is not working won't let me in [removed for privacy] I put in all this info for a forgotten password & DID NOT get an e-mail back Plese advise and help to get my account up and working successfully Thank y