Mkinitcpio -- what can I do?

I just discovered my mkinitcpio.conf
My HOOKS currently look like that:
HOOKS="base udev autodetect pata scsi sata usb usbinput keymap filesystems"
According to usb the wiki says:
Adds USB modules to the image. Use this if your root device is on a USB mass storage device.
an according to usbinput:
Adds USB HID modules to the image. Use this if you have an USB keyboard and need it in early userspace (either for entering encryption passphrases or for failsafe mode)
my question is:
can i kick them both?
I am using a notebook, so i've got no keyboard. Neither my root-device ist on an USB-Device.
Ad: should i just uncomment the entries or can i delete them?
Svlad

You can kick those and the two out of "pata scsi sata" that you don't use. Delete keymap as well, if you don't need to enter anything during the bootup (like a password for an encrypted root partition, in which case you would also be using the encrypt hook).

Similar Messages

  • Itunes wont open and gives me a message saying "Itunes has stopped working".  What can I do to fix this?

    I use windows vista and I have upgraded my itunes.  Now when I open it, it gives me a message saying "itunes has stopped working"  and then gives me a message saying it will notify me for a solution.  What can I do to fix this so it can open and not give me any more problems???

    First you can try;
    Try restarting PC and run itunes again!
    If error again than perform clean instal of itunes (uninstal first and than instal again)!

  • My apps dance open and close on their own in my IPad 2 what can be the prob? I have already restored

    I got the charger flex or pin changed and now the apps dance on the screen, photos open and zoom in, then out, the other apps open and close. I have already restored the device with Itunes and prob is still there. What can be the problem? Any suggestion will be welcome. Thank you

    THANKS for your prompt reply  Bluetooth is off in my laptop and IPhone.. and in fact the reset is the only thing that can make it back to normal. But for a lil while. I wonder if it is the touch, or the home botton... both things are very expensive to replace, so I wouldn't like to spend $$ and continue having the prob.....

  • Troubleshoting help needed:  My iMac keeps crashing and restarting with a report detail: "spinlock application timed out"  What can I do to fix this?timed out"

    Troubleshooting help needed:  My iMac keeps crashing and restarting with a notice: "Spinlock application timed out"  What can I do?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

  • HT1338 cinema Display 30" no longer recognized by my mac pro? What can I do? It worked fine until now.

    Cinema display 30" no longer recognized by my mac pro. Until now it worked without problems, then after a crash it fails to recognize the display.
    Now it runs in a far lower resolution. What can I do?
    I tried to get da driver for it, but could not find any.

    Try the other DVI port on the graphics card.  On early Mac Pros, only one port is the dual-link DVI needed for full resolution on the 30" display.  Make sure the display's USB cable is plugged into the computer.

  • HT2693 what can i do when vendor contact support page can't send my info/msg due to page error and i have paid for an app that no longer works after purchase

    What can i do when i purchase an app then after purchase the app fails to work. I deleted the app rebooted ipa then reinstated app. It still fails to work. I went to vendor support but when i go to send the info to them it comes up with unable to send msg due to page error. I am not happy. My child loved the app now it wont even open. Any help???

    Try talking to iTunes support
    http://www.apple.com/support/itunes/contact/

  • TS1591 my ipod touch 2g is no longer being recognized by itunes why and what can i do i have reset it and everything

    my ipod touch 2g is no longer being recognized by itunes why and what can i do i have reset it and everything

    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Hello and good afternoon, my IPod Touch is neither in windows explorer nor in iTunes to be seen. When I turn my IPod on, i shall connect it to my computer; but when I do so, nothing happens. What can I do, please ???

    Hello and good afternoon, my IPod Touch is neither in windows explorer nor in iTunes to be seen. When I turn my IPod on, i shall connect it to my computer; but when I do so, nothing happens. What can I do, please ???

    Take a look at the troubleshooting steps provided by Apple in this support article:
    http://support.apple.com/kb/TS1538
    Hope those help.
    Your iPod touch will never appear in Windows Explorer, by the way. It doesn't have the "disk mode" that the older iPods did.
    Regards.

  • Hi there has been someone on my game clash of clans on my iPad and have spent over £50 and I need the money back what can I do?

    Hi there has been someone on my game clash of clans on my iPad and have spent over £50 and I need the money back what can I do?

    Hello Vaidas Vaidas,
    It sounds like you are noticing someone else is accessing your Clash of Clans data by playing the game and you have tried to reset your Apple ID password. If you are following the steps outlined in this article:
    Apple ID: Changing your password
    http://support.apple.com/kb/ht5624
    What is preventing you from changing your password? Any error messages or prompts?
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • HT1386 I have a brand new ipad with iOS 6.1.3 and an imac with OS 10.5.8. I cannot update my OS on this machine, but want to sync the new ipad. What can I do?

    I have a brand new ipad with iOS 6.1.3 and an imac with OS 10.5.8. I cannot update my OS on this machine, but want to sync the new ipad. What can I do?

    If it's an Intel Mac, you can upgrade it to Mac OS X 10.6.8.
    If it's a PowerPC Mac, you need to use these instructions and/or iTunes Match to put content on the iPad.
    (83068)

  • HT4623 My apps and my phone freeze up and go back to the locked screen what can I do?

    My apps and my phone freeze up during use and go back to the locked screen. What can I do?

    Hi theora,
    If you haven't already done so, does restarting or resetting the iPhone help the issue?
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If not, we may want to restore your iPhone using a computer with iTunes.
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Thanks,
    Matt M.

  • Photoshop CC: When I'm trying to draw a rectangle I can't fill it or create a stoke because there is a message telling me; "Could not complete your request because of a program error. What can I do?

    Photoshop CC: When I'm trying to draw a rectangle I can't fill it or create a stoke because there is a message telling me; "Could not complete your request because of a program error. What can I do?

    It is a mute point now. PSE12 finally failed to the point it locked up the MAC. I had to restore the MAC OS from backup to a point before the PSE12 update.
    The MAC now operates correctly and so does PSE12. I don't think I'll be updating PSE any time soon.

  • De-authorizing itunes? Several of my authorized pc's have died, and have no way to deauthorize iTunes on them. Now I am unable to synch purchases on my Iphone to new computer with iTunes because I already have 5 computers authorized. What can be done?

    Several of my authorized pc laptops and desktops have completely died over the years, and have no way to deauthorize iTunes on them. Now I am unable to synch purchases on my Iphone to new computer with iTunes because I already have 5 computers authorized. What can be done?

    Deauthorise all to reset to zero, then authorize again.
    Following quote from Apple Support:
    If you need to authorize your new computer and are unable due to already having five authorized computers, you can deauthorize all computers by doing the following:
    Click iTunes Store on the left side of iTunes.
    If you're not signed in to the store, click the Account button, then enter your account name and password.
    Click the Account button again (your Apple ID appears on the button), enter your password, and then click View Account.
    In the Account Information window, click Deauthorize All.
    Note: You may only use this feature once per year. The Deauthorize All button will not appear if you have fewer than two authorized computers. If you need assistance on using this feature, please contact iTunes Store support via email (http://www.apple.com/support/itunes/store/).

  • I have a problem with my home butten, its working but when i press it, it seems like something is stuck in it. like sand or something like that, and this is the second time it happens to me with 2 devices. what can i do?

    Ok so first sorry for my english, Im not American.
    2 months ago i bought a new Iphone 4 device from my phone company, after a month something happened to the home butten, when i pressed it it felt like something stuck in it.. like sand or dirt.. but the home butten worked perfectly. so i went to the phone company and they told me that it is a problem and they replaced it with a new one. but after a week my iphone fell and something happened to him so i sold it to someone i know, and with that money i bought a new one from privet store (unlike the last time, when i bought my iphone in a big phone company) and in the begining it felt new, i didnt had any problems, but 2 days ago when i woke up i pressed the butten and i noticed that the problem with the home butten is back.. and i dont know what to do.. i mean like its not a big deal or something, it just that when i buy something new, i excpet it to be new, and i want to ejnoy it while its new.
    so i went to some guy i know and he told me that he will see what he can do, i paid him 130 Shekels (35$) and he told my that he replaced the butten with new one, but still it makes problems. it bothers me alot, because i pay almost 300 shekels per month (75$) and i expect from this device to be new.. and its killing me.
    now, i cant go to the phone company because thats not their device, and i know what the people in the privet store will tell me.. that its my fault and bla bla bla.. so what can i do? i cant spend any more money on this..
    its new.. for some reason this always happenes to me.. 3 devices, problems problems and problems..

    You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
    and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money..

  • I just purchased to songs to put on my child's Leappad 2 MP3 player and I can see the songs under my music files but cannot save them because they were not downloaded as a MP3 file What can I do?

    I just purchased two songs to put on my child's Leappad 2 MP3 player and I can see the songs under my music files but cannot save them because they were not downloaded as a MP3 file What can I do?

    iTunes: How to convert a song to a different file format

Maybe you are looking for

  • Printing pictures using Quarkxpress 4 on OS 9

    I'm new to using Quark. I have created a document in Quark 4 with pictures, everything prints out ok except the picture. I've overheard a guy who works in a printers talk about embedding pictures, do I need to do this and how?

  • Dynamic Implicit Structure Creation Question

    Hello, I was curious if it was possible to dynamically create an implicit structure where you might occasionally want to omit some keys from being added to the structure? I played around with using ternary operators in the structure creation with no

  • 3.2 Server Stuck Offline & Wake on LAN issues

    Got through installation and getting started guide running 1 VM Server and a separate VM Manager   I was able to shutdown the Server from the Manager GUI; however, when trying to restart the Server from the Manager I received an error: OVMAPI_4005E N

  • Where to put .OpenSAPConnection

    I am developing an asp.net application that loads information from our CRM system and presents it to the user. I want set up the connection and load the data as the page is being set up. The trouble is, if I put the .OpenSAPConnection call in the Pag

  • PDF resolution setting?

    I have an 800 page pdf document that is 4.3K in size. I used https://cloud.acrobat.com/convertpd to create and 8 page document. The size is 46.K, so big as to be useless. Is there a way to set the resolution in this product?