MKTPL_MP queue in ECC ???

Hello,
we are during R/3 upgrade to ECC. when releasing campaign or/and campaign element in CRM 5.0,  in ERP 6.0 system queue MKTPL_MP appears.
Before ERP upgrade it did not appear cause we had only in ERP queue crm_mktpl_r3* registered.
now everything in campaign and campaign element in CRM after releasing looks ok. In Administration tab
status is transferred to ERP.
Do you know this queue? what it is supposed to do? should I register it in ERP?
Regards
Radek

I registered queue MKTPL_MP in ERP system. I found that it only inserts data to table cmpb_map - mapping for campaigns.
Regards

Similar Messages

  • How to start and stop a queue in ECC??

    Dear all,
    I have a problem regarding the Start and Stop of queues in ECC. Whenever I change the data in ECC (for example extension of a material to a new distribution chain, or Creating a quotation which has to trigger a corresponding quotation in CRM), replication is not happening to CRM. On analysis of the outbound queue in ECC, we are finding corresponding ernties for the material / quotation. On dbl cliking an entry, we are able to see the queue in STOP status. When tried to reset status and activate, system throws a message saying GENERIC STOP SET.
    1) How to overcome this problem?
    2) How to START or STOP a queue (for Eg: R3AD*) in ECC? 
    Please respond.
    Every point you share will fetch so many points / lot many smiles to you (No surprises.. I am plagerizing the famous quote on SDN)
    Regards,
    Rajesh

    Dear Chandra,
    Thanks for ur quick response. I have awarded you a sixer. Ofcourse, the content is much richer than that. But if i award 10, thread has to be closed. So that stopped me from awarding that
    Dear all,
    Can someone else share their views?
    Regards,
    Rajesh

  • XML file getting stucked in queue in ECC preventing material status in MDM.

    XML file getting stuck in queue in ECC preventing material status in MDM to be changed.
    Hi SAP Experts,
    We have an issue regarding XML messages getting stuck in queue in ECC preventing the material status in SAP MDM to be changed from "Approved" to "Updated/Posted".
    Checking in transaction SXI_MONITOR the status of the XML Messages are Scheduled or Green Flagged, looking at the time started it has been an hour and it is not yet processed successfully; and also checking the queues XBTR* (XBTR0001, XBTR0002 and ETC.) via transaction SMQ2 have stopped.
    We need to manual process the XML messages for it to be processed successfully.
    I'm unable to understand why these files are getting stuck in Queue's.
    Many thanks in advance and have an awesome day ahead.
    Regards,
    Aeron Merc

    Hi Aeron,
    Check whether the Queue XBTR* (XBTR0001, XBTR0002 and ETC.) is Unregistered in SMQR.
    If it is so you can see as U in the Queue type.
    Try to register by selecting the queue and click on Registration button and activate.
    Then check your message in MONI,  hope this should solve your problem.
    Thanks
    Sai.

  • Struck up with R3AD_* Queues in SMQ1(Outbound Queue in ECC Side)

    Hi ,
    I am using CRM Middleware for replicating business partner(BP) from CRM to ECC
    and material from ECC to CRM.
    BP and Materials are replicating well.
    My Issue is,
    while checking queues in SMQ1 (Outbound Queue in ECC Side), i am getting many queues are pending also
    status as "SYSFAIL".
    QUEUE Names are R3AD_000000123,R3AD_000000139,R3AD_000000141... R3AD_*,etc..
    I tried to unlock the queues and activated, afterthat also queue status is "SYSFAIL". Then i checked in CRM side
    Transaction Code SMW01,
    BDOC Details:
    BDOC State Description: Information no processing.
    BDOC Type :BUS_TRANS_MSG.
    ERROR Message:
       a.Processing of document with GUID 4E57E4A5108162A7E10000000A0BE02A is canceled.
      b.Business transaction type ZEQQ does not exist.
      c.Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.
    Thanks and Regards,
    Ravi A

    Maintain a filter in ECC go to Tcode SM30 , then go to table/view and enter CRMRFCPAR click maintain and enter
    User CRM
    Object Name SALESDOCUMENT
    Destination xxxxxxxxxxxx
    Load Type delta download
    Queue Name
    Queue Name
    BAPINAME
    INFO
    InQueue Flag X
    Send XML
    CRM Release 700
    Logical system xxxxxxxxxxx
    this will stop the flow of ecc sales documents to crm
    this will also stop Bdcos in SMW01
    Please let me know if this helped

  • Message stucked at O/B queue in ECC

    Dear All,
    We have a scenario - Purchase Order Data posted from ECC to SRM system through PI using Proxy.
    Problem is when the message is triggered from ECC, it was stucked up at O/B queue in ECC in MCEXO2 queue and the entry was not found in SXMB_MONI in ECC.
    Could you please suggest us resolution.
    Thanks & Regards,
    Soumya.

    Dear All,
    In SMQ1, select the Q, Unlock & Activate. When we        click  on activate system issues the message   u201CLUWs in status NOSEND must be picked up by the application u2013Message No :: SR082 u201C.
    What does that mean ? Can anybody suggest What are we missing ?
    Regards,
    Soumya.

  • Outbound Queue in ECC with CRM Destination

    Dear experts
    In ECC - t-code SMQ1, outbound queues R3AD_SALESDOxxxx in destination to the CRM system are in SYSFAIL.
    I think those queues are created when an ECC user changes or creates a sales document in ECC. But we don't synchronise sales documents between ECC and CRM.
    What are the settings to avoid this outbound queue to be created?
    Thanks in advance,
    Regards, Stephanie

    Hello Stephanie.
    Please remove the following table entry in your ECC system:
    TBE31 (Application components by Publish & Subscribe interface)
    - The following entries must exist for a successful data exchange:
                     Event            00501014
                     Obj.class        BUSPROCESSND
                     Fmodule          CRS_SALES_COLLECT_DATA
       Also see Note 490932.
    Best regards,
    Maggie

  • BASED ON QUEUE NAME HOW CAN WE FIND THE SENDER SYSTEM IN ECC

    Based on queue name how to identify the sender system
    the issue is
    Messages are  are coming from pi to ecc , check below queues. These are incoming queues
    to Ecc from PI. We are trying to find what these queues are. Sometimes these
    are failing and we are not able to process,
    Based on the above information we need to find  the sender system from where it is coming.
    Regards
    MADHU

    Hi srinivas- Thanks for your reply and there is no issue on pi side after reaching to ecc the entries got stucking in smq2 of  ecc system now the target system wants to know on which sender system these messges are coming we are not finding sender system detials from smq2 of ecc system .
    Regards
    Madhus

  • Queue Prioritization in R3/ECC

    Hi,
    We have prioritize PI queues already. In PI it is more of interface specific queue allocation. If we go to sxmb_adm of R3/ECC, again we could see similar options of managing queues. Do we have some simitar concept in R3/ECC too? e.g. if there a lot of  messages coming to ECC from a low priority PI message, then is there any possibility of sending these messages to specific queues in ECC?
    Kind regards,
    Prateek

    Okay ;o)
    So transfering IDocs via qRFC between systems might be an option for you. But this just guarantees that for example EOIO messages do not overtake one another even during transfer from one system to another.
    IDocs are processed in the ECC system via 2 ways. Either "immidiately" when received, or via "background job" which has to be scheduled. Please see you config per inbound message in ECC in WE20.
    So I guess the prioritization as you need it will not be provided by message prioritization as configurated in XI.
    Kai

  • Error while downloading the object u201CDNL_CUST_PROD0u201D from ECC to CRM

    Hi All,
    I am trying to download the object u201CDNL_CUST_PROD0u201D from ECC to CRM. However it ended up throwng an error. Below are the error details:
    The following Errors/Warnings occured. Do you want to continue?
    Please read the OSS Note no. 212666 (QUEUE_ALREADY_EXITS:R3AI_DNL_CUST_PROD0)*
    DNL_CUST_PROD0: Object will not be loaded
    After getting the above error I deleted the already running instance and again ran it. But when I again ran it, it gave me the same error. So I checked for the entries in Outbound queue of ECC system. But couldnt found any entry.
    Please help me fixing the issue.
    Thanks in Advance.
    Cheers,
    Rj

    Hello RJ,
    Check CRM I /B and O / B (txn:SMQ2 and SMQ1) and also R/3 I /B and O / B queue, for the presence of
    R3AI_DNL_CUST_PROD*.
    Also, abort the running load in txn:R3AM1 for object DNL_CUST_PROD0.
    Then try to re-load the object.
    I do not see any other reasons for the above error message.
    Best Regards,
    Shanthala Kudva.

  • Screen output without connection to user, Message struck at inbound queue

    Chaps,
    I executed inbound proxy form PI 7.0, the message was struck in the inbound queue of ECC 6.0,
    with status text "Screen output without connection to user" then when I apply execute LUW then it is converted to
    "ThiSend:bad tm type /connection closed (no data)".
    when i test the same message from 'SPROXY' t.code, inbound proxy class was working fine.
    I came to know that when we call an ABAP program in side a proxy then it will throw same error what I got by checking the below url
    Message struck at inbound que in server proxy
    But in my proxy. I am just putting the data into z table and on some condition I am calling some other BAPI call.
    Here my doubt is calling the SUBMIT for other ABAP program is same as calling the BAPI call?
    because in the above thread clearly saying that don't use the other ABAP program in proxies. is the same case for calling the BAPI call into the proxy?
    In proxy, the logic is I am just simply reading the data from IS(integration server, PI7.0 SP 18) to ECC 6.0(SP14) if the row is not there the data is reading into table. If row is already there then it is stuck up in SMQ2 (inbound queue) of the ECC
    am I missing any basic things? please guide.

    But in my proxy. I am just putting the data into z table and on some condition I am calling some other BAPI call.
    Here my doubt is calling the SUBMIT for other ABAP program is same as calling the BAPI call?
    I too believe ..
    because in the above thread clearly saying that don't use the other ABAP program in proxies. is the same case for calling the BAPI call into the proxy?
    It is saying not suggestable...!!!! BAPI calls work perfectly !1
    In proxy, the logic is I am just simply reading the data from IS(integration server, PI7.0 SP 18) to ECC 6.0(SP14) if the row is not there the data is reading into table. If row is already there then it is stuck up in SMQ2 (inbound queue) of the ECC
    am I missing any basic things? please guide.
    Seems so,
    Lets try below things..
    1. Plz check the user is having auth to run the executable program in ECC.
    2. It seems that you are not using the proxy structures in a correct way..and check the calling program also..!!
    Edited by: Santosh Rawat on Jul 30, 2009 1:12 PM

  • Proxy messages are stucked in SMQ2.Can I pass these msgs in separate queue?

    Hi Guys,
    File >PI>ABAP proxy. (ECC)
    Once i pick and process the file, the resultant message is updating the table in ECC through ABAP proxy. These messages are high priority and they should not stuck in the queues in ECC.
    The problem is some of the messages of this interface are getting stucked in queues (SMQ2) by colliding with other low priority messages which are failed due to some data issues.
    Is there any way I can separate these high priority messages into separate custom queue and process them?
    Do I need to this in ECC or PI?
    Thanks
    Deepthi

    Hi,
         As Debashis has already said, use message prioritization in PI to handle your requirement.
    For SAP NetWeaver PI 7.0, navigate to SAP NetWeaver 7.0  SAP NetWeaver 7.0 Library  SAP NetWeaver Library  SAP NetWeaver by Key Capability  Process Integration by Key Capability  SAP NetWeaver Exchange Infrastructure  Runtime  Integration Engine  Prioritized Message Processing.
    For SAP NetWeaver PI 7.1 (including EHP 1), navigate to SAP NetWeaver  SAP NetWeaver PI/Mobile/IdM 7.1  SAP NetWeaver Process Integration 7.1 Including Enhancement Package 1  SAP NetWeaver Process Integration Library  Function-Oriented View  Process Integration  Integration Engine  Prioritized Message Processing.
    For more details about message prioritization within the Advanced Adapter Engine, please refer to SAP Help Portal http://help.sap.com, and navigate to SAP NetWeaver  SAP NetWeaver PI/Mobile/IdM 7.1  SAP NetWeaver Process Integration 7.1 Including Enhancement Package 1  SAP NetWeaver Process Integration Library  Function-Oriented View  Process Integration  Process Integration Monitoring  Component Monitoring  Prioritizing the Processing of Messages.

  • Messages getting scheduled in SAP ECC Box:Messages getting stuck in Inbound

    The scenario is -
    JDBC Sender-->> SAP PI-->> ECC Server(via ABAP proxy)
    The Interface is running properly in SAP PI & then the messages are getting posted to the Inbound queues in SAP ECC Box. Generally it takes few seconds for the messages to get processed, but now all are getting scheduled in the Inbound queues(in different channels as seen in SMQ2)
    We re-ran the interfaces again a few times, but all of them kept getting scheduled. Finally, after 2 hours one of the messages got processed. I suppose we won't face any problem now onwards.
    Though I can see several suggestions like registering the queues & assigning dedicated queues to the interface, none of the blog suggest the probable cause of the event?
    Can this be due to some issue in the server(heavy pressure of data in the server during the period/issue in the queues??)
    I found the following links regarding issues like these --
    XML file getting stucked in queue in ECC
    Message in scheduled state
    Thanks

    Is the printing issue with one specific printer or across system.
    What method you have configured for output device.
    There should be any issue if you add spool work process to Application server.
    Then you should be able to configure spool server load balancing. (Search on help.sap.com for spool load balancing)

  • Error in SMQ2 in ECC

    Hello Experts,
    My Interface JDBC -->PROXY messages are succesfull in PI .In inbound queue of ECC 6.0,with status text "ThiSend:bad tm type /connection closed (no data)".
    I came to know the message scheduled due to function
    module sxms_async_exec
    and raising an exception as ThiSend:bad tm type/
    connection closed (no data).
    This problem is happening only some times .Please throw some light on the issue .
    Any help is highly appreciated.
    Regards
    Praveen

    Hi,
    If you double-click on the queue that is in stop status (so, step one when you have your list of queues, double-click on the one that is in error state, this will give you a one-line entry, then double-click this one line again, and it will give you a detailed view of what is held within that queue), it will give you more information and may have a line in it that is causing the error. This tends to give you more info on why it is in stop status (we have had wide, varied and some weird ones in here!) - most of the time you fix it by just deleting that line that has the error associated with it. then you just go back one level to the queue 'header' and click on the unlock queue button and it should process.
    Hope this helps
    Regards
    Cara

  • SMQ2 Error in ECC 6.0

    Hello Experts,
    My Interface JDBC -->PROXY messages are succesfull in PI .In inbound queue of ECC 6.0,with status text "ThiSend:bad tm type /connection closed (no data)".
    I came to know the message scheduled due to function
    module sxms_async_exec
    and raising an exception as ThiSend:bad tm type/
    connection closed (no data).
    This problem is happening only some times .Please throw some light on the issue .
    Any help is highly appreciated.
    Regards
    Praveen

    I had a similar issue in the past.  This was due to the incomming data into ECC, and can be resolved by Debbuging the active call.
    Please use the following steps to debug an active session.
    1. Assuming you have a Service user making calls from PI to ECC. Convert this user to a System user.
    2. Set up External break-points in ECC for the service user.
    3.  Push the errored message again from PI to ECC
    This would open up a debugging window for the active session.  Once done, you would be able to trap the error.
    Once this error is trapped,  catch the exception and generate an error log, do not throw out an exception to end processing.
    Hope this helps.
    Regards,
    Abhishek

  • Messages strucking in Receiver ECC

    Hi,
           I have a scenario i.e. non-SAP to PI to SAP ECC. In that, in PI we are getting Successful flags on every monitoring, but data is not inserting in ECC tables, due to Queues strucked in ECC (smq2) and we can see those messages with status scheduled in SXMB_MONI tcode in ECC system. Means messages are strucked in Queue. Some times In production environment it is giving very critical issue. Here I have a doubt. Between PI and ECC only one Queue is available or multiple?  If one message struked in Queue remaining all the messages also be strucking. If only one queue is avail between PI and ECC, Is there any other way to increase number of Queues to overcome this problem.
    Thanks & Regards,
    Srihari.

    Hi Srihari ,
    Every R/3 system will have the concept of queue.
    If the messages are passed successfully from PI and are stuck up in ECC means there might be some data issue with the first failed message in queue. you can save that message using save LUW and then thus releasing rest of messages from queue.
    even if you increase number of queues on ECC , queue stuck still can be a issue. Only way is to remove problamatic message from queue and clear the queue. lateron you can investigate on error message .
    Regards,
    Sheetal

Maybe you are looking for