ML issues after standby/sleep

I upgraded to Mountain Lion yesterday and I've been having a big problem with my 2.53 GHz Intel Core 2 Duo MacBook Pro crashing in a very bizzare way, typically after being in standby/sleep mode.
It starts up from standby/sleep and programs that were open before standby/sleep are hung and can not be "Quit" - they just sit there hung up - force quit will not work either. If I try to start certain apps e.g. Activity Monitor it just bounces forever. The system can not be retarted or shutdown. The system is usless. The only way I can get my system back is to open term and issue a reboot command. I ran a fix on the permissions on the boot drive and also checked for any other errors.
Any recommendations as to how to get my system back?

Same issue here.
MacBook Pro (2008 or so).
After trying to wake (after hibernate) the system does not boot (it shows the progress bar but never shows screen).
Sometimes a strange 'blue screen' (stripes; oh no not like windows )
Sometimes just no reponse.
It defenetly knows it crashed; it states so when starting up again (power button with a text) and on reboot you can report it:
panic(cpu 0 caller 0xffffff800da2220b): "Hibernate restore error e00002eb"@/SourceCache/xnu/xnu-2050.7.9/iokit/Kernel/IOHibernateIO.cpp:2892
Backtrace (CPU 0), Frame : Return Address
0xffffff8085ff3bc0 : 0xffffff800d61d5f6

Similar Messages

Hard drive startup issues after extended sleep/shutdown

Hello,
When I put my iMac to sleep or shut it off for an extended period of time (overnight) and then try to wake it up or turn it on, the iMac makes a strange clicking noise and freezes.
After manually shutting down and restarting it one or more times it will startup fine.
Putting to sleep/shutting down the computer for short periods of time doesn't cause any problems.
So when this first started happening I though "Uh oh, hard drives going to that great recycling depot in the sky."
But, Disk Utility, Apple's hardware test, and TechTool Pro 4 all find nothing wrong with my system.
Is there any chance this could not be an hard drive issue? Or should I just get the drive replaced and stop trying to diagnose the problem?

You've covered the biggies already - I'd recommend a trip to the Apple store or at least a call to AppleCare. Back in the late 80's and early 90's 'stiction' was a serious problem with hard drives. A hard drive motor has very low torque; it can spin fast but it doesn't have much oomph and the lubricant used back then could harden overnight so that when the computer was booted up the drive's motor couldn't spin up the platters. Improvements in lubricants have made stiction less common today but it hasn't been eradicated and it is one of the things that might be affecting your drive. At any rate, since I can't put your computer on my bench, the best call I can make is for you to make a call. Sorry.

Macbook sound issue after standby

Hello,
Bit random issue here..
This is not consistence but it is totally random. Randomly when i open the macbook lid when it comes out off standby by i hear a weird "ripping" sound issue i think its coming from left hand speaker or side. Im assuming its the speaker.
Its hard to explain its starts with a weird fuzzyness and then it turns into a rip type sound and stops.
It last about 2 seconds and is random and only happens after putting up lid.
Is this normal? any ideas?
thanks

Upgrade kernel to 3.1.5 still not fix the sound issue
On 12/14, I upgraded imagemagick, pcre, texinfo, virtualbox-modules, wxgtk with `pacman -Syu`,
after reboot, the sound comes back, everything works fine just like before
But on 12/16, I lost the sound again, only found these line in kernel.org
Dec 16 09:28:29 localhost kernel: [75508.452468] ice1724: Too long irq loop, status = 0xff
Dec 16 09:28:29 localhost kernel: [75508.452468] ice1724: Disabling MPU_TX
no matter how I tried to reproduce the upgrade on 12/14, still unable to fix the
issue, and those warning didn't show up again, I also boot into live USB to check
if this is hardware problem, but sound works normal in live USB
it's so weird...

How i get by with the sleep, pause issue after 1.0.2 update

ok. i'm sure you guys are aware of the ipod sleeping/pausing issue after updating your ipod to 1.0.2. my ipod will pause whenever it is in the jensen dock station and the green battery indicator shows up. whenever i use the dock or remote to unpause the song, a few seconds later, it pauses again. so instead of using the dock or remote to play, unpause, whatever, i connect the ipod to the dock and use the wheel to navigate and 'only' use the play/pause button on the ipod itself to kick off the playing of music. if i go back to the remote, the ipod pauses. if i only use the menu and play/pause button on the wheel, my songs do not pause. it sure was nice using the remote before 1.0.2. i mean, it did come with the dock for my remoting pleasure but alas, i shall wait on the next update. hope this helps someone.

I will have to try that... I took my iPod to work today and plugged it into my JBL docking station and it was skipping. I did notice it seemed to go to sleep more often when I used the remote... There's a whole other forum on this maybe you could check out too. But it's really annoying and I hope Apple comes out with a fix soon! I will definitely try to use the iPod wheel tomorrow and not the remote.

W540 - Blank screen after undocking/sleep

Hello folks.... I have a Lenovo W540 which has a simple problem that is frustrating me to no end. Whenever I undock the laptop, or bring it out sleep, the screen remains blank.
I end having to put it back in the dock (or RDP to it), which allows me to view the screen content on the external monitors.
I have updated all the drivers using the Lenovo driver app, and even applied the docking driver update. Nothing seems to help. I've searched the forums, but all that I have found is a suggestion to downgrade the video driver, which I dont really want to do.
Anybody else have this issue? Any ideas?
Thank you!!
//EDIT to add that this is Windows 8.1. Important information

i have the same issue.
and another more anyoing issue. when i turn my computer off (real shutdown, not hibernate or standby/sleep) and try to turn it on after a few hours the displays stays black. but the system is botting in background. when i attach an external monitor i can see the system is started normally. the only way to get the lcd back to life is unplugging the running machine and release the battery. so it'll turn off really hard. plugging the charger again and use the power button will bring the display back.
it is really annoying. i have the machine since 5 days and have this problem every morning!!!!!!!
please help asap, otherwise i will buy another fabricate and return the lenovo.
(w540 20BH002PFR - win8.1 pro - all newest drivers installed from lenovo upgrade-center)

WiFi issue after 6.1.2 upgrade

I upgraded my OS to 6.1.2 and now I'm having troubles connecting to the internet at work. I did reset my network settings and inputted the appropriate password and still having issues. It identifies the network but when open safari or an app requiring internet connection it goes nowhere. Is anyone else having this issue. Does anyone know how to fix this problem. Keep in mind my connection works fine at home.

Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Swing application eats CPU on resume after standby

My application contains a mix of regular Swing components and about 200 (small) custom components (JPanels) that draw themselves. The problem is that if put my laptop into Standby, then restart it, the application eats CPU. It goes from ~4% pre standby to ~48% after standby. Totally repeatable. There is only the main thread, the AWT thread and a couple timers firing: one to get data from a server and one to redraw the custom controls to make the control blink (calls repaint() to cue up a call to paintComponent()). I put timing code in the two timer driven threads and both are running fine. NOTE: each of the custom components is just a rectangle with a short text string in it. Think checkerboard with text. The background color is all that is being changed. It's basically a grid of alarm/status "lights".
I did some searching and only found a reference to a drawing bug that was fixed back in 1.4.x that had to do with WinXP and dual-headed computers.
Note that another simple Swing application I wrote (no custom controls), doesn't appear to behave this way, so I suspect it has to do with the custom drawing stuff (rolling my own paintComponent() method).
Any thoughts on how to figure out what is eating the CPU? I'm using NetBeans 6.7 and JDK 1.6_14 under Windows XP.
Edited by: garrysimmons on Sep 15, 2009 1:52 PM
Edited by: garrysimmons on Sep 15, 2009 2:57 PM
Edited by: garrysimmons on Sep 15, 2009 3:02 PM

It doesn't matter if it's a Swing timer or a Util timer. It behaves the same either way. That was one of the first things I tried.
I ended up refactoring the code to go from a grid of individual controls (think checker board where each square is a control that draws itself), to a single "board" control that draws a grid. That seems to have fixed the issue. I can go in/out of Standby and the app doesn't eat a ton of CPU any more. The real problem may still be there, just too small of an effect to notice.
I don't know why the original design would work fine before a Standby, but not after. Having ~200 little controls doing repaints twice a second must confuse something in the JVM/Windows versus having 4 large controls doing the same amount of drawing.
It's working, so time to move on.

Satellite A100-049: CDs and DVDs don't read after standby

I have a new satellite A100-049 that came with vista home premium pre-installed. After returning to the computer from sleep/standby (Whatever the mode is when the light pulses yellow) no discs can be read in the drive. The disc will spin continually but nothing will happen.
Everything works fine when the computer is turned on first time, but after sleep it stops reading discs. Is there anything I can do about this?

It doesn't recognize it when i re-insert it or put it in fresh after standby. It just keep spinning without loading. Wierd thing is, if i try to load a program with the disc spinning and by clicking on the desktop icon and then take the disc out while it isn't loading I get a message saying please insert disc

Display Issue after 10.9.2 update

After updating my Macbook Pro with Retina to 10.9.2 -- My display flickers for a second after sleep and or blank screen and then goes back to normal. Has anyone else been having display issues after updating?

Yes similar problem here: I have a MacBook Pro, 15 inch Retina, Mid 2012, and when I connect a secondary display via HDMI (and also HDMI-to-Thunderbolt) then the external monitor becomes the main display.
I have not figured out on how to switch back to former settings. My guess: it's a bug. A quick search confirms that many others have secondary display issues since 10.9.2
(Steve would have fired those lazy punks, who failed to do sincere testing before release …)

Is there a fix for the wifi connectivity issue after ios6 update?

Is there a fix for the wifi connectivity issue after ios6 update?
Cannot connect to any wifi since update to 6.0.1
How do I get update to 6.0.2?
Will that even help?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Log-In Screen Does Not Appear When Resuming From Standby/Sleep

We are running T400s with XP SP3. From time to time when the computer comes out of standby the login screen will not appear. You just get the background image and your mouse. The mouse will move across the screen. However there is no screen saying press Ctrl+Alt+Del or swipe a finger to login. Also swiping a finger, or pressing ctr+alt+del, typing in your password and hitting Enter does not work either. It seems to be a random but frequent occurence. The couple of T400s with Vista installed do not have this problem. Any ideas?

After doing some troubleshooting I narrowed it down to the FingerPrint reader software. Sure enough after uninstalling it fixed the issue but then the finger print reader is useless. I looked at the latest Version, 3.2.0.116, readme file and it states:
<3.2.0.116>
- (Fix) Fingerprint Reader is not working ater 1 minute idle.
- (Fix) Fingerprint Reader is not working after standby/resume.
I am wondering if they are still working out the bugs, nothice the "l" missing from later. Any help would be a big plus as I need to roll out about 200 or so for my employer in the next month.

EMac having issues waking from sleep

I used to own a 1 gig eMac. I never had an issue with it, now that I have sold it however, it's having this issue waking from sleep. The only way to get it back is to power it down by holding the power button.
When I had it, I had Panther running on it's main drive and Tiger running on a firewire drive. Regardless though, I can't see that being the issue (well I guess I can ... I don't want to believe it, but I guess I can). Now it's running Tiger on the 80 gig main drive. When he goes to wake it, the drive spins up but the screen stays dark, but if he holds the power button down it works fine. Go figure?
Has anybody else had this issue. All of the software updates were and have been done since. Though I don't recall exactly which version of Tiger he's on but I know he's on the most recent. Any input will be greatly appreciated of course.
I don't know that the Apple Hardware Test would indicate if a hard drive was about to fail either would it?
Regards
Mike

I think what that post was trying to express is that there's often a lag between the release of new Mac hardware and the release of retail OS X Install discs that incorporate all the new drivers that go with the new hardware. That is, if you have a retail OS X disc that was pressed in January, it likely will give poor results if you use it to restore a Mac released in September. If you look at the Software section of System Profiler, after the OS X numerical version you'll find a build number in parentheses; "Mac OS X 10.4.11 (8S2167)", say. While you almost always hear the "don't use an earlier version of the OS on your new Mac" warning expressed in terms of the numerical OS X version, it's really the build number that matters. It's safe to say that you can use a retail OS X install disc on a Mac that predates the release of that OS X disc.
Since the 1.0 GHz eMac shipped with Panther 10.3, any retail 10.4 disc will work with it. So on one hand, good news: your buyer doesn't face the fun of doing a reinstall of the OS, but bad news, that leaves the question of why it isn't waking from sleep.
There could be a remote chance that the wireless mouse is involved, although it's unlikely and I've never had such problems with any of the Logitech mice I've used through the years. If you have the LCC (Logitech Control Center) software installed (it'll show up in System Preferences -> Other when using View by Categories) from the CD that came with the mice, you can compare it with the current version 2.6 and possibly upgrade. I'd also check that the mouse's battery is fresh.
You might get a better clue as to what's going on by opening Applications -> Utilities -> Console, select system.log, and look for events timestamped around the time the eMac was put to sleep and again at the it was attempted to wake it. You might find something like:
AFPSleepWakeHandler: going to sleep
System Sleep
Enabling XMM register save/restore and SSE/SSE2 opcodes
Followed, upon waking the computer, by:
Started CPU 01
IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
System Wake
USB caused wake event (EHCI)
AppleYukon2 - en0 link active, 100-Mbit, full duplex, flow control disabled port 0
kernel[0]: AFPSleepWakeHandler: waking up
mDNSResponder: Repeated transitions for interface en0 (xxx.xxx.xxx.xx); delaying packets by 5 seconds
configd[67]: posting notification com.apple.system.config.network_change
lookupd[2678]: lookupd (version 369.6) starting - Wed Aug 20 08:06:57 2008
Some of the calls will depend on whether the Mac is on a network, managed remotely, etc. What you want to look for are any errors or suspicious messages close to the AFPSleepWakeHandler call, around either the System Sleep or System Wake lines.

Airport does not reconnect after standby...

Is anyone having issues w/ wireless not reconnecting after standby? In order to resolve the problem, I have to turn airport off then back on. Most of the time I can get back on using on/off method, but seldomly I have to reboot. This is my config:
SSID is not broadcasted, using capital letters and numbers for SSID Name.
WPA TKIP set for router encryption. WPA Personal selected on Airport.
I don't seem to have this problem on my Macbook running Leopard, so I'm pretty sure it's hardware/driver related to my Macbook Pro. I have to keep tabs on this, but I almost think this problem does not appear when a network SSID is broadcasted and/or unecrypted. It could be my imagination but not sure.
Any ideas or same issues out there?

I always have the same problem; I assume it has something to do with the fact that I regularly switch my cable modem to "standby" when done surfing the internet. Seemingly Airport loses the signal (or whatever) because the modem isn't feeding a signal being in standby mode? When I turn the modem back on, I have to turn Airport back on as well. So far, I've just felt it to be a small inconvenience.

Redo Log Apply after Standby Restarts

hi all,
To start my learning on Data Guard, I've successfully followed the manual steps to create a physical standby database. What I noticed is when I restart the standby database, the received redo log aren't automatically applied until I issued the following command:
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION;Is that normal? If yes, is there a way to make redo application remains automatic after standby database restarts?
Thanks in advance.

When you configure the DataGuard in an SQL environment you need to manually start the redo apply process after the Standby Database is mounted. You can script the database startup and include that when "select database_role from v$database" is Physical Standby then "ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT;"
OR
Yo can configure the DataGuard under the broker control which will start the redo apply process automatically when the Standby Server starts.
Sudhir.

E550 will not come back after hibernation/sleeping mode

Thinkpad E550 will not come back after hibernation/sleeping mode. please help. I just bought this garbage laptop about 1 month ago. the big issue is the laptop will not come back after sleeping. I often run some calculation for some hours, the laptop always goes sleeping and wont come back. I had to power off the laptop and re-started it again. All of my calculation results were gone. Lenovo support is very bad, I already submitted a service ticket 2 weeks ago, but nobody contacted me. Lenovo laptops are garbage. I will not buy it anymore. Anyone can help? thanks a lot!

HI Clare,
In the Toshiba Power Management utility you should click on the 'advanced' tab and about half way down the resultant window you should see an option for the action to be taken when you close the lid of your SA30.
Make sure that this is set to 'hibernate'. Then go to the power save modes and click on the 'details' tab and then the 'Power Save Mode' tab and make sure that the 'Hibernate' option is set to 'never'.
With these settings your notebook should go into 'hibernate' when you close the lid but not at any other time.
Note that you can set the notebook to hibernate when running on battery when the bttery capacity reaches a pre-set value of your own choosing.
regards,

ML issues after standby/sleep

Similar Messages

Maybe you are looking for