ML keeps restarting after installation! HELP!

I have installed ML and after the installation, it keeps restarting itself. Sometimes it will make it to the desktop and other times will just restart when at grey screen. I have rebooted to disk utility using CMD+R and verified and repaired permission and it still did not help the problem. Now I have booted in safe mode, and it says my software is 10.8 (ML). The update does not show up in my app store, what is the next step to reinstalling ML or any other ideas

So under the four options it gives me, pick the reinstall OS X option? Also, could you explain the Archive part in more detail as I have never had to do anything like this before. Thanks

Similar Messages

Mac Pro will not restart after installation of Lion. Help!

Mac Pro will not restart after installation of Lion. Help

Reinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Ipod touch 4th gen needed a new screen and sleep/wake switch. So, I replace them. I was able to get to settings and do "erase all content and settings". I am not able to totally shut this device off as it keeps restarting after a few seconds.

Ipod touch 4th gen needed a new screen and sleep/wake switch. So, I replace them. I was able to get to settings and do "erase all content and settings". I am not able to totally shut this device off as it keeps restarting after a few seconds. I have used itunes to restore and also recover. Device will actually shut off and stay shut off if I leave it connected to the computer. The moment I unplug (3 seconds) the apple logo appears, it boots, unlock screen appears, I can unlock and operate normally, unplugged or not. Just cant get it to completely shut down unplugged. Any thoughts?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem. Maybe you installed a bad component or damaged something during the repair/replacement.
Apple will not help since you worked on the iPod yourself.

Computer keeps restarting after installing windows 8

Can you help my computer keeps restarting after I installed Windows 8? I have the minidump file zipped

We do need the actual DMP file as it contains the only record of the sequence of events leading up
to the crash, what drivers were loaded, and what was responsible.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.
If you are overclocking stop. (chances are if you dont know if you are, you are not)a
To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.
The procedure:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button. (if available on your site, MS doesnt have this)
*Please upload them to a file sharing service like Skydrive or"Rapidshare" and put a link to them in your reply.
Link for how to upload below.
http://www.wikihow.com/Use-SkyDrive
To ensure minidumps are enabled:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
Please also run MSinfo32 and upload the output as well.
To run MSinfo32 please go to start>run>MSinfo32
Go to "file" "save" and upload the saved file with the DMPS
(Instructions for XP, Vista, Win 7, Win 8)
System specs are often useful so include whatever you know
Dyami & Wanikiya ...Team ZigZag.

Macbook keeps restarting after ram and mountain lion upgrade

I installed an 8gb ram from OWC to my macbook (late 2008 aluminum body model) and upgraded to mountain lion after having leopard for years. I decided to erase the hard disk completely and upgrade to snow leopard and then download the mountain lion software. I had installed the new 8Gb ram on leopard before any of the two upgrades. Ever since I had the upgrade the computer restarts randomly and takes me to a grey screen saying than an error ocurred. It mostly happens when watching netflix or any other type of streaming video. I tried using chrome and firefox and it only helped for a little bit. I had to take my macbook to my local apple store to get it checked and apparently the ram was not positioned correctly. After they "positioned correctly" the computer worked fine. But now a few hours later I'm back at my apartment and the computer keeps restarting. Please help me with the issue.

<Deleted>

FIM Sync service keeps restarting after being disabled

Hi - We are deploying the SharePoint User Profile Store connector and I have followed all the steps here:
http://technet.microsoft.com/en-us/library/dn511003(v=ws.10).aspx
However the FIM Sync service keeps enabling and restarting itself - can't see anything in the event logs except a Evt ID: 2001 - Service was started successfully
What is starting this service? How can I stop so that it remains in the disabled state?
Thanks
J

Hi,
Based on your description, my understanding is that you want to disable the FIM Sync service, but FIM Sync service keeps restarting after being disabled.
I suggest you start the FIM Sync service again and stop it, then disable it.
You shouldn't need to start those services manually - SharePoint will do everything itself when you start the User Profile Sync service in Central Administration.
Restarted the User Profile Synchronization Service in Central Administration.(Central Administration -> System Settings -> Manage services on server -> User Profile Synchronization Service.)
Stop the FIM Sync service and then disable it.
Here are two links, you can use as a reference:
http://serverfault.com/questions/147738/not-able-to-start-forefront-identity-manager-service
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Iphone keep restarting after 60 seconds

I need help for iphone keep restarting after 60 seconds, when I update ios 5.0.1 (9A405), how to overcome these problems

Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it back to factory settings would be the next step:
Use iTunes to restore your iOS device to factory settings - Apple Support

Finder froze, restarted. Now keeps restarting after boot.

Hi!
The title pretty says it all.
Finder froze completly, and I forced a restart. After the restart it keeps restarting AFTER boot. By that I mean after getting into the desktop.
Any ideas?
Tried a few things my self, but it just keeps restarting..
Got a Mac mini, can the macbook somehow boot from that? I just need the data from the harddrive!

I could not find anything the direction I was going. OK, you can start from your DVD. What happens if you just click install? If you are able to install, then your would be installing Sno over Sno, as if doing an upgrade install, in an attempt to fix your Sno installation. In principle, your files, users, apps, and settings would not be affected. But,before trying this sort of install, you will need to resolve the issue of what sort of backup you have. Most importantly you may have important unbacked up files. If so, then you might be better off going to a data recovery specialist before trying to reinstall Sno over Sno.

T400 keeps restarting after being re-imaged with Ghost

I built an XP image with the recovery disks from Lenovo.
Now I'm trying to dump this image on to other T400's that are straight out of the box and after the image is done loading the laptop will just keep restarting.
Please help.
Configuration:
- hard drive is set to ACHI (defualt)
- did a full disk image when dumping down.
I don't get a flashing cursor or error message the laptop will just restart aftee the Lenovo Screen.

ashaikh, welcome to the forum,
how did you create the image? Did you capture the 4 boot blocks using the -IB switch?
There is a tip, a bit old and you can ignore the part about setting the predesktop area to disabled, but it should hopefully help you.
Partition does not boot after being restored with Norton Ghost
The title may also not seem to be 100% relevant. The important part is the -IB switch - See this thread.
Hope this helps
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

My iphone 4 keeps restarting after i changed the battery

my iphone 4 keeps restarting after i changed the battery and its every few minutes please help!

my iphone 4 keeps restarting after i changed the battery and its every few minutes please help!

I tried to update the software of my iphone 3gs while charging with my Macbook Pro. While the phone was restarting after installation, in the setting up my phone menu, it stops midway with a message in itunes on the laptop that there is no simcard.

I tried to update the software of my iphone 3gs while charging with my Macbook Pro. While the phone was restarting after installation, in the setting up my phone menu, it stops midway with a message in itunes on the laptop that there is no simcard.

Then put a SIM in. You cannot activate an iPhone without a compatible Sim.
If your iPhone was hacked/jailbroken the update restore the lock.

My iPhone 6 keep restarting after I open a few apps!!!!!

My iPhone 6 keep restarting after I open a few apps!!! Sometimes during a call

Hi kaiserleung,
Thank you for using Apple Support Communities.
Please see the information in the article below on troubleshooting this issue where your iPhone is unexpectedly restarting.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
Cheers,
Alex H.

Keep getting error installation helper has stopped working for readstep2

keep getting error installation helper has stopped working for readstep2

attach a screenshot of that error message, FAQ: How do I capture and post a screen shot or... | Adobe Community

Equium A60 keeps restarting after ATI Graphics driver installation

I have installed ATI graphics driver from Toshiba, but when I restart the laptop, it won't boot up, keeps restarting just before surposed to go onto windows XP. Please help.

i have the same problem. It looks like graphic card stopped working in SVGA mode, it is possible to boot Windows by enabeling VGA mode or choosig save mode on F8 screen. Reinstalling drivers didn`t help. Even reinstalling Windows didn`t help:(
blue "screen of death" shows this
<...>
"The device driver got stuck in an infinitive loop. This usually indicates problem with the device itself of with the device driver programming incorrectly.
Pl.check <...> drivers updates.
Tech.Info
*** STOP: 0x000000EA (0x841C8508,0x8424D258,0xF7933CBC,0x00000001)
ati2dvag
begining dump<...>

I cannot install Firefox for Android on HTC Desire (Froyo) via Android Market, as the download keeps restarting after reaching 60-75 % (around 7-8 MB out of 13.84 MB). Any help?

The download in Market restarts after some time. The notification bar displays download % as if the previous download is still in progress. That is, first time the download started, notification bar shows correct %. At around 70%, the download inside Market app starts again from 0 KB, and the notification bar shows avergae of the two downloads(35% when download in Market is 0%, 40% when download in Market is 10%).
This second download again disappears from Market, and a third begins, no error message nor any other warning is displayed. This time the notification bar shows average of 3 downloads!
No idea what is happening, this is my first time downloading firefox for mobile.

Sorry, I don't know why the Market app is failing to complete the download.
If it is still not working, you could try the FTP server link on this page, and see if it works any better:
https://wiki.mozilla.org/Mobile/Platforms/Android
You could also try downloading Firefox to your computer using that FTP link, and then search for instructions on how to "sideload" the app onto your phone over USB.

ML keeps restarting after installation! HELP!

Similar Messages

Maybe you are looking for