ML server: more than one mail relay

How can I add more than one mail relay for outgoing mail through ISP?
In the server.app I can only add one mail-relay. My ISP recommends more

First I've heard of that recommendation....
Unless there's something rather odd going on here — cases such as very flaky ISP mail servers or very flaky network connections to the mail servers, such that you're finding a need to redirect your own mail client host settings to different mail servers at the same ISP, for instance — or if you're going to be sending out massive volumes of mail — I would leave it at one host, and see if there's an issue.
Mail servers are designed to retry for transient outages, so most errors should retry.
Postfix allows one relayhost, unless you want to get into sender_dependent_relayhost_maps and that's not particularly common.
With static IP and correct DNS, you could eliminate the relayhost setting entirely.  That's a typical approach with mail servers.

Similar Messages

  • Recovery of more than one mail at a time from Time Machine

    Hi. I'm trying to recover some old mails from Time Machine. My problem is that I can only recover one mail at a time. After it has been recovered Time Machine closes and I have to start all over again so this project will take some time:-). I've tried to highlight more than one mail but then mail crashes….I use OS 10.7. Can anyone help?
    Regards
    Henrik

    just use "command" key:-)

  • Send more than one mail

    HI,
    How should I send a delivery confirmation by email to more than one mail adresses?
    Thanks
    Zsolt

    Hi !!
    You can use the t.code V/34, here select your required output type say LD00, (get into the change mode) Select this entry, now click on 'Partner Functions'(available in the left hand margin), Click on 'New Enteries' . Under the heading of 'Medium', select 'Mail' , make necessary enteries under the headings on Function & name.
    Now maintain the records for this output type for ex.LD00 in the t.code VV21.
    Now try and execute your business process, this will definitly work.
    Give your feedback.
    Regards,
    PATHIK

  • Attach more than one Mail Message to iCal Event

    Hi,
    I need to attach more than one e-mail message to an iCal Event. I can drag and drop one onto the url when I edit the event, but if I try another it replaces it. Any ideas?

    You can only attach one Numbers to a Email.

  • Customer Master: Communicatio method more than One mail ID

    Hi All,
    I have a requirement here:
    In the customer master - General data - address - communication method
    My user want to maintain more than one e-mail id, i see system allows to insert more than one id.
    Requirement: User want system to send ex: order confirmation to all the IDs that are maintained in the customer master.
    Issue: I see in the customer master after I insert the mail ID there is a radio button which restricts to only one ID where the communication to be sent.  
    Help: Any one got some idea how I can fulfil this requirement please?
    Yash

    hi
    this is to inform you that
    create a Z table woth maintaince view with authorized personall only.
    where you can have/maintain n number of mail ids of the users.
    and
    two function modules are available for the same one is old and anothre is new function modules provided by SAP.
    when ever you want to trigger a email you have to call the z table.
    then it triggers automatically.
    regards
    balajia

  • More than ones MAIL Boxes in Mail

    Hi ALL,
    After using Migration Assistant a couple of days ago I notice that in Mail application, in the right column my mail folders tripled. Al the Mail folders I had in Tiger ONES I have NOW 3 times. There is ONE folder called 'IMPORTED' with everything 3 times in it.
    Can I just select the mail folders I have 3 times an trash them?
    Also in the right column ALL of my e-mail accounts I have I can see as separated folders, in these account folders are ... again folders like draft, sent mail, in, etc ...
    A other thing is to notice is that there are little white en blue folders mixed up in the right column.
    I need a good reliable advice in this otherwise I louse ALL the mail I have.
    Thanks in advance ...
    Dimaxum

    i had a problem like this... i know others also who had this type of problem...
    in my case, the messages appeared to be duplicated 2 or 3 times in the same mailbox... the mailbox count was more than double the expected number of messages... i checked the number of files in the actual mailbox directories for each mailbox in ~/library/mail/... each mail message is stored as a separate file in a directory with name of the mailbox... the file count matched the actual number of messages i had expected and not the inflated number that were appearing in the mail program...
    using "rebuild" from mailbox menu caused mail to hang part way thru... after restarting mail the problem was worse, but the actual file count in the affected mailbox directory was still correct. in my case, i rebooted and retried it and the mail.app rebuilt mailbox successfully...
    when this didn't fix the problem for the other's that i know, their solution was to move the mail directory out of ~/library/mail... always make sure mail is not running when moving anything in the ~/library/mail directory... after restarting mail, mail.app made a new, pristine ~/library/mail... then they quit mail and copied back the mailboxes from the old library/mail directory into the new ~/library/mail. afterward, starting mail, you will see mailboxes, but no messages in them. that is because the database file hasn't scanned the mailbox directory yet... use the mailbox/rebuild command on each mailbox... this effectively makes a new version of the database file that keep track of where each mail file is...
    if it is any consolation, the 6 or 7 times i know of this happening was always around the time of importing and transferring mail from another program...
    if your issue is that you have duplicated mailboxes, then do look inside ~/library/mail to see what is actually there... if the mailboxes are actually duplicates and have the same content, i'd expect you could remove the duplicates without problems...
    i imagine there are other ways to deal with this...
    good luck-

  • Having more than one mail box, how do I define which will be the one to send e-mails?

    I have 5 mail boxes and always when I send an e-mail, it sends automatically from one that I don't use much. How do I change for my preferred e-mail?

    Mail preferences under Compose tab. Set which account to send mail from, or set it to use the highlighted account.
    You might also verify in Mail preferences under Accounts, that each account has it's own SMTP server. Be sure the correct one shows for each account. I would also check the box to use only that server for that account, which will insure that the correct server and only that server will be used for the account. Otherwise if the SMTP server for the sending account fails, it will just switch to another account's server.

  • How can servlet serve more than one client's socket links when tomcat start

    I have done this in the servlet's 'init' method:
    while (true)
    Socket sk = server.accept ();
    new ServerThread (sk).start ();
    but tomcat STOPPED at this point! The webapp didnot even been installed. But I want to show the index.jsp pages of the webapp, the code above only running at background. How can I do that?

    Eeeew... what are you doing there? Of course Tomcat stops. You have an infinite loop, and accept() blocks until someone actually connects.
    And a servlet shouldn't be using sockets anyway. This is most ugly, and possibly against the J2EE specs.

  • Can I get more than one account on iphone microsoft exchange server

    Hi all,
    I was trying to get more than one account on iphone microsoft exchange server for mail, but it seems to only accept one. Is this true with everyone else out there. I guess I am one of the few people with more than one email account that uses microsoft exchange. I would love to have the convience of accessing them through iphone mail but it seems that I will be forced to use safari for the other two by typing owa... in the url.
    any workaround to the one email account per iphone policy??

    Yu can only have one Exchange Server account per device. This is true to iPhone and any Windows mobile device in the market. The work around is to set your other accounts that reside on an Exchange server using IMAP or POP settings as you used to do before the Version 2 update allowed you to sync directly to the Exchange Server. This methode will allow you to add as many accounts as you want or have.

  • I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

    I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

    I assume these are POP accounts and all computers are set to remove from Server after downloading.
    So on the non dominant ones... Mail Preferences>Accounts, highlight an account, Advanced tab, uncheck remove from Server, just have the main dominant one remove from server.
    Or get/setup IMAP accounts.

  • Outlook (ex Hotmail) on iPhone refuses to send e-mail to more than one person

    Hi,
    I have two questions today...
    When I try to send an e-mail to more than one person from my @outlook.com address on my iPhone it fails everytime and a message pops up that it could not connect to the server. Sending e-mails to one person at a time works perfectly. I think this is a Microsoft issue as I had to verify that I was "human" before I could send a test e-mail to more than one person while logged into the Outlook website on my PC. I never had problems like this on my old Gmail and Ymail accounts. Any ideas how to fix this?
    Alternatively, I can use my @icloud.com e-mail address, but this leads to my second question. Apple states that I cannot use my iCloud e-mail address as my Apple ID. I do however not want to keep two mailboxes. Can any e-mails Apple send me (eg. receipts for purchases, etc) be sent to my iCloud address? I'll can then just keep the other e-mail address just for the Apple ID but do not have to monitor it. It this can be done please advise where I can change this.
    Any advice will be greatly appreciated.

    Some style rules that Firefox handles well on the screen can cause this problem. Many email sites have a print button which simplifies the message format and removes navigation elements, etc., and Firefox generally handles print-formatted pages better. If your email site doesn't have print-formatted pages or those do not print, a "hack" is to select the text you want to print and then choose the Selection option in the print dialog.
    To hide email addresses from recipients, you need to place them in the BCC field. What do you put in the TO field in that case? You can use your own address.

  • Cannot run more than one instance of a remote app in remote desktop services Server 2012

    All,
    I installed "Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows Server 2012 Style" using the instructions here http://blogs.technet.com/b/yungchou/archive/2013/02/07/remote-desktop-services-rds-quick-start-deployment-for-remoteapp-windows-server-2012-style.aspx
    I need to set up an image viewing program (Olyvia) to allow students using Macs and iPads access to this windows only application in order for them to get their work done.  We may have 12 or more students accessing and trying to run the Olyvia application
    at any one time.
    All works good, except that I cannot run the Olyvia application (setup as a remoteapp program) more than one instance at a time.  That is, when I start up "olyvia" on a Mac, it works great.  If I leave it up and running, and then try
    and start up "olyvia" on an iPad (using different accounts), I get the following error message:
    "Cannot run more than one instance of this program simultaneously.  Either the program is already running, or it has not been terminated completely."
    I need to understand the root issue.
    1.  Is this a licensing issue?  So, I need to add some CALs to the RDS server?
    2.  Is this a application issue with "olyvia"?  So, no matter what I do, it is not going to be able to be used by more than one person at a time when configured as a remoteapp?
    3.  Did I not "publish" the application correctly?
    4.  Is this happening because I followed the "quick start" guide?
    Appreciate any help I can get on this.  We have no problem getting CALs, I just need some help with the root issue.
    Thanks,
    Geoff Weatherford
    CVMBS, CSU

    Hi Geoff,
    Each application uses different techniques for determining if multiple instances are running.  If you can determine what method it is using then perhaps you could use App-V or other virtualization software.
    In the best case you really should direct your question to the maker of Olyvia.  The reason I said that is they specifically designed their software to prevent multiple instances, so the first question is, why?  Is it related to Licensing? 
    Compatibility?  If you knew the specific reason(s) why they are doing it and the technique used then at the point using a virtualization technique may be the best option.
    -TP

  • Can I have more than one e-mail address attached to my apple account?

    I can't seem to create different FaceTime accounts using different e-mail addresses but with 1 Apple account. My daughter's IPod is attached to my Apple account, but I want to use her e-mail address for her FaceTime app. Any thoughts?

    Cessna007 wrote:
    how do i sign up for a new e-mail address @icloud or @me; and can I have more than one e-mail address?
    You create an @icloud.com address in the first place by signing into Settings>iCloud with your Apple ID and choosing an addres - you can only create an @icloud.com address, not @me.com.
    Then if you want further addresses on the same account you can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (In fact it's a good idea to give out alias addresses, rather than the main address, because if they attract spam you can easily change them.) (New aliases can only be @icloud.com ones; @me.com addresses cannot now be created.)
    You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account or move it to another account.
    More information on aliases here: http://help.apple.com/icloud/#mm6b1a490a

  • How do i sign up for a new e-mail address @icloud or @me; and can I have more than one e-mail address?

    how do i sign up for a new e-mail address @icloud or @me; and can I have more than one e-mail address?

    Cessna007 wrote:
    how do i sign up for a new e-mail address @icloud or @me; and can I have more than one e-mail address?
    You create an @icloud.com address in the first place by signing into Settings>iCloud with your Apple ID and choosing an addres - you can only create an @icloud.com address, not @me.com.
    Then if you want further addresses on the same account you can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (In fact it's a good idea to give out alias addresses, rather than the main address, because if they attract spam you can easily change them.) (New aliases can only be @icloud.com ones; @me.com addresses cannot now be created.)
    You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account or move it to another account.
    More information on aliases here: http://help.apple.com/icloud/#mm6b1a490a

  • How can i transfer more than one file from server to client

    Hi,
    our requirement is transfer more than one files from server to client using the
    webutil_file_transfer.as_to_client_with_progress.One file transfer is already working in our system.If anybody know the solution please inform
    regards
    mat

    just an idea ...
    for this purpose let us put aside security concerns and other potential problems....
    -- Get the content of a server directory with Filter and create zip file
    1) create a class that implements java.io.FilenameFilter ...
    2) define accept() method ...
    3) call File.list() with the filter as a parameter. The returned array of strings will have all the names that passed through the accept() filter
    4) use java.util.Zip to create ZIP file on the server side
    -- I think it is better to create this functionality as a separate Java class, put it in required folder and after it
    -- use Forms->Program->"Import Java class" to create pl/sql wrappers, than to create wrappers for all classes and code in pl/sql
    5) use webutil to transfer file on the client
    6) use Java on client side to unzip transferred file
    if you think this is not too complicated, you should try ...
    Regards,
    Vladimir

Maybe you are looking for