ML81N- actual hours show up as 1 ACT on PM order
Hello all,
When confirming hours via service entry sheet the actual hours that were posted disappear in the actual posting the PM order.
In ML81N i confirm 3 line items,
line 1: 2H on 15.02.2010
line 1: 6H on 16.02.2010
line 1: 4H on 18.02.2010
All these confirmations are displayed on the PM order as 1 ACT. The thing is, when using ML81N and cofirming towards a WBS element, the Hours DO show up when checking the postings on the WBS element...and not everything is combined into 1 ACT.
I suspect this has to do with the settings in the service master or maybe the customizing regarding completion confirmations or maybe even with the setup of the PO. But so far i have not been able to discover the cause of this issue.
I hope somebody can help me.
Thanks in advance for your help
Kind regards,
Peter
More information:
I have tested several scenario's and i have determined thatit has to do with the PO created. I have found 1 PO that gives me the desired result (the good PO). I tried to copy the PO exactly, but i can not get it to work:
I believe i made the same settings
Account assignment: U
Item category: D
no usage of service master
Good PO:
Booked on WBS element directly: hours show in CJI3 on actual postings
Booked on PM order: hours show in actual postings of PM order
My own PO:
booked on WBS element directly: hours do not show in CJI3. booking is 1ACT
booked on PM order: hours do not show in PM order. Booked is 1 ACT.
The service ordered is different between them. so different vendor, service, material group. but i can not imagine that that's the reason.
I hope this information will help you finding the solution
regards,
Peter
Similar Messages
-
Order wise-Planned hours VS Actual Hours report
Hi,
Is there any report which shows me the Orderwise Planned Hours VS Actual hours.
Regards
SBSB,
Have a look at TCode IW37N (Order/operation overview) and display the Work and Actual Work fields.
You can probably use IW37 too..
PeteA -
Actual Hours difference between IW38 and IW47
Hello all.
I have a unique situation that I am trying to handle. Am trying to see if someone here knows what is happening.
I have a Work Order. In the "Costs" tab and in the "Quantities" Sub tab
Planned hours of Word=36 hrs
Actual Hours=35 hours.
But when I run IW47 to see all the confirmations to this order, it only shows 3 confirmations totalling 14 Hours.
While in the order the actual hours is 36. I am not sure what happened to the remaining 21 Hours. Can someone please tell me what else could be going on here.Hello,
I was also facing the same issue for actual work hours difference in iw37 and iw48 .
But following sap note has solved the problem.
146929
Missing or incorrect actual values in activity
Cheers!!!!
Regards,
Piyush -
PM module- After upgrade ECCC6, Actual hours confirm displaying in PM order
Hi PM Gurus,
After Upgrade from 4.6C to ECC6.
I have ceated a PM order & done the time confirmation by IW41.
In Order - Opeartion Tab page , does not show actual hour confirmed for a particular operation.
But we can see Actual work hour in other way" Extrasu2014Order Documentsu2014Completion Confirmations"
Please provide if there is any OSS note is available for this problem or any other solution.
thanks
with regards
LokeshHi,
The intention is that this actual work field is only made available (on operation overview) for historical orders. For normal orders, confirmations are made and these figures are accumulated to give a 'actual work' value. This can be seen on the operation detail screen. It is never possible to enter data directly in this field.
It is possible this actual work field was visable on some releases at particular patch levels but this was an error. The table control settings allow access to this field but the program logic will always overwrite any user settings with ''invisable' setting for this field.
A modification would be required to make it visable.
-Paul -
CAT2 - Actual hours exceeds Planned hours.
Hi All,
I am maintaining seperate data entry profile for Time Administrator. When i posted time entry for a subcontractor using the time administrator profile, it throws error message saying "Actual hour exceed Planned hours". I had checked the planned hours in CJ20N for the personnel no. it has surplus hours.
Then why it showing error message.
Regards,
Shadeesh.GWhat is CJ20N ?
We see the message "Actual hour exceed Planned hours" as a warning when the number of hours entered in CAT2 exceeds the Planned Hours in the employee's Daily Work Schedule.
Are you getting a "Warning" or an "Error" ?
Warnings and Errors are part of Time Management configuration. For example, if you use IT2005 to record Overtime, you can select "NoMessage/Warning/Error" through the Daily Work Schedule (V_T550A). -
How Actual hours for a Particular Activity is getting Calculated in CJ20N?
Hi Experts,
i have a small issue in PS module.In Cj20n after creation of project, under the activity the actual hours are differing from those of CATS hours.How or from where the actual hours are getting populated.The value is getting stored in AFVGD-ISMNW.
Plz help............hi
have you transfering the actual time after entering and approval to the PS. by the t code CAT5 - Transfer -
Actual hours impact on Variance analysis
Hi:
When we talk about actual activity hours then in how many ways it can impact variance calculation. We have aggregated our work centers and hence define an aggregated machine hour for it. Is it ok? E.g
A work center X constitute of 3 machine aggregated
A
B
C
Machine hours has been entered in for X after combining the hours required by A,B,C . Please guide.
BrHi:
May i please know the advantages of entering actual hours at process order confirmation time. At client side they have a practice of entering the same hours as shown planned in CORR. They do not enter standard hours. Moreover may i please know the impact planned hours correct entry in operation. Please guide me.
Br -
How get the actual hours worked by the employee in SAP.
Hello Experts,
How to get the actual hours worked by employee in a month.( Any infotypes or tables or fm)
I have report to get planned hours of the employee
Thanks and Regards
ReddyHello expert,
I am a technical guy, I dont have functional knowledge and HR functional support is not available at the moment..
I have requriement to develop a report to caluclate the actual night shift hours worked by the employee...
I have report : RPTEDT00 where in I have actual hours worked day and night..
But I am not able to find how do in my custom program from the program reference...So I want to know is there any way where in I see this data in tables or infotypes
Thanks and Regards
Reddy -
Hi Expert,
The actual cost showing different in two report cji3 & cn41.Plz help me.
ThanksI did whatever you have suggested me.but i have not found desired result.
scenario is- In cn41 report
suppose the actual cost in wbs is 6649095
But under this network & activity level the actual cost is 6461522
In cji3 report at network activity level the actual cost is 6461522 & the actual cost of wbs is also 6461522
Plz guide me why cn41 report showing different actual cost at wbs level.
regards -
In IW32 no Planned Cost and Actual is showing Zero
hi,
In IW32 no Planned Cost and Actual is showing Zero,since activity type is mentioned.
how it could be displayed.
ThanksDear Sharma,
1. This is regarding Maintenance order, frist you confirm by clicking on the operations tab-> double clicking on the work center->click on costing tab, check here activity type, activity unit is maintained.
2. then in in KP26 check the activity price in the current period.if it is zero u will get zero
3 then in the order click on components, if components are consumed also check the component price in material master.
this will resolve your issue
sree -
Total Planned and Total Actual Hours for service order
Hi,
Is there is any table in which I can directly find the Total Planned and Total Actual Hours for service order.Pl suggest.
Regards
SBSorry SB, didn't read your post properly... I thought it was costs you were after...
AFVV holds the total actual work at operation level.
PeteA -
Bought a new iPad 2 and iTunes only includes Movies and Music tabs at the bottom of the screen, ie no TV Shows. If I search on the Store, say for Homeland I get albums, podcasts, etc everything but the actual TV show. Can anyone help.
TV Shows are not available in certain countries.
Check here:
http://support.apple.com/kb/ts3599 -
Testing testing. I noticed my actual name shows up and not my screenname. What name do you see me posting as?
Thanks Sarthak. Oddly, when I am in my edit profile mode and go to view as "dropdown" (choose everyone, registered members) They all show my real name in the sample and not my screen name which I think should be fixed.
-
Hello Everyone,
Here's my problem. Ical was working perfectly fine at first but all of a sudden I logged on one day and the hour was set to Saturday while the time on all my events remains 9:27pm and I can't edit the hour or the minute anymore...becuase the hour shows up like a day and will not allow me to put numbers. I've tried to change it on prefrences but I can't find anything that will change it. What do I do? It's getting real irritation.Hi, welcome to Apple Discussions.
Try closing iCal, going to your preferences folder (your user > Library > Preferences) and deleting the file called com.apple.iCal.plist, then re-opening iCal.
Post back to say if this worked.
Best wishes
John M -
Hi,
How the production order actual hours is calculated? In which tcode can i check the actual hours took to complete a production order?
In my scenario, the order wise confirmation is done (CO15) not the operationwiese.
Kindly help.
TIA,
SabithaHi,
In milestone confirmations, planned activities are always posted on the basis of the confirmed quantity. If you have entered activities manually during a milestone operation, planned activities are also confirmed when the preceding operations are automatically confirmed. The exception to this is the setup times, which are always confirmed fully, independently of the entered quantity
You enter a confirmation of 7 pieces for milestone operation 30, which has a planned yield of 10 pieces. Operation 20 is confirmed automatically. The planned machine time for operation 20 is 40 minutes, therefore a machine time of 28 minutes is confirmed
For display of conformations please refer to this link
http://help.sap.com/saphelp_47x200/HELPDATA/EN/b1/c04dd1439a11d189410000e829fbbd/frameset.htm
Maybe you are looking for
-
How to define internal table in smartform(urgent)
Hi all, How can i define a internal table <b>with header line </b> in global data ??? i defined like In Types, TYPES : BEGIN OF T_XVBPLP2 , VENUM(10), VEPOS(10), POSNR(6), VEMNG LIKE LIPS-LFIMG, MATNR LIKE
-
How do I convert an audio CD format album in my library into MP3
Here's my problem. I have two vehicles. The older vehicle only plays audio CDs and the newer vehicle will play MP3 songs. So I want to burn two CDs, an audio and an MP3. I imported my original CDs into iTunes and kept them in the original format, not
-
I dont have a nano sim yet, and in applt store, they activated my iphone 5 with a nanosim, but i have a problem, and i have to restore my iphone. if i restore it with itunes, will i need to activate it again after the restore, with a nanosim, or its
-
My macbook pro 13inch doesn't recognize Huawei E303C 3g dongle what should plz suggest?
I am not sure about using a usb hub fo this problem, if any one knows abt this plz respond. If so which one to use usb2 r usb3.
-
Iphoto not working after 10.5.2
After 10.5.2 and graphic updates, iPhoto does not work any more. When I launch it, after a few seconds it quits by itself, with Console message "segmentation fault". Tried erasing preference file, with no results; Don't know what to do