ML81N Make FM fields display only in account assignment

Requirement is to make FM fields already derived from PO (derivation working correctly) display only or add an error message. Easy I thought just go to config for SES and click on Additional Fields display only (Cost Center?, WBS element? there was no funds management fields available)...then after some time investigating
Have debugged the transaction and found some possibilities.
(1) BADI TR_GET_ACCNT_ASSIGN called in function FM_ACCOUNT_GET_COBL from MS_ACCOUNT_ASSIGNMENT.
(2) User Exit EXIT_SAPLFMCH_001 called in function FM_CHANGE_AA_SUBST
(3) Use FMDERIVE to somehow check the PO derivation
Just wondered if anyone had taken this further before I spend a lot more time understanding the whole process in order to achieve a small bit. Please I am a technical resource not FM specialist.
If I could understand the process flow, at least it might help me make quickest simplest solution.
thanks,

Hi,
You can customize the field status in tx OME9 for the relevant account assignment category.
But be aware that this customizing will be valid for all purchasing documents and transactions - not only for ML81N and the services area.
During SES postings, inheriting the FM account assignment from the reference PO is the standard and expected behaviour, so you may see that FMDERIVE is not called when the PO reduction is to be posted during ML81N. Instead, the FMAA is read from table FMIOI and fmderive is skipped in those lines (fi transaction keys KBS/WRX, for instance).
I hope this will help you
Kind regards
Mar

Similar Messages

Custom infotype - issues with conversion class - making fields display only

Hi,
I created the custom infotype 9008 using t-code PM01, created conversion class ZCL_HRPA_UI_CONVERT_9008_XX and assigned it to screen structure ZHCMT_BSP_PA_XX_R9008 in the view V_T588UICONVCLAS. Coded the methods IF_HRPA_UI_CONVERT_STANDARDOUTPUT_CONVERSION and IF_HRPA_UI_CONVERT_STANDARDINPUT_CONVERSION. I'm trying to make some fields display only within the method OUTPUT_CONVERSION dynamically. Coded the check class ZCL_HRPA_INFOTYPE_9008 with business logic.
Everything seems to be working fine when I test using the test tool through t-code PUIT_UI.
When I try to create/modify 9008 record through PA30, the code in the methods OUTPUT_CONVERSION and INPUT_CONVERSION is never getting executed. The control is not coming there at all. The fields are allowing input. Any idea why this is happening.
We are on ECC 6.0 and at service pack level SAPKE60035. Couldn't find any relevant SAP notes as well. Appreciate your help in this regard.
Thanks,
Kumar.

Hi Venkata,
Check this document.
This explains about custom infotype creation.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1?overridelayout=true
regards,
Brinda L

PO - GL Account Field - display only

Hi,
Please could you advise on the options for making G/L Account field display only in ME21n?
I think there are probably a few ways of doing it which I am investigating, but would like your opinion and advice if possible.
Thanks in advance.
As always - points up for grabs!

Hi,
Hope you are doing cost center accouting with account assignment K while creating PO
Then go to MM --> Purchasing --> Account assignment --> Maintain account assignment category _-> Select cost center K --> Change view account assignment details you can
make G L account as mand or optional or display or hidden.
Check this out please if it helps you.
Best regards,
Sridhar

Make fields 'Display only'

Hi
I have default u2018dep key u2018 & u2018useful life u2018 in the system. Now I need to make these 2 fields 'display only' in master data. How can I do it?
Thanks
Ava

Hi
In AO21 you may not have 'Display' option, but you remove the check under 'Mn No' for these two fields. then they would be only in display at master level. Since we tell the system that maintenance would only be at asset class level
Thank You,

Pl.ignore pevious post--make some fields appear only once....

hi,
my report looks like this:
batch no:-date:----name:--amount:---so many fields:
1---------01/01/03---abc----$50------.....
----------01/01/03---bcd----$20------.....
----------01/02/03---hgi----$30------.....
----------BATCH TOTAl:-----$100
=====================================================
question:-> is there any way that I can make date field appear only once if the date is same?
Thanks,
prasad.

That is the trick of my question.
I wanted the total value to be grouped by Batch Number and NOT by date and at the same time date should not appear more than once.
I am not able to convince my client that it is not possible in Oracle to TOTAL BY BATCH NUMBER and GROUP BY DATE.
Someone has created this report in some other report writing tool (I think MS-ACCESS), and they want the same report in Oralce now at any cost.
Can I achieve this by writing a trigger? If yes, is there any link or help available?
Thanks for the reply.
Regards,
Prasad.

Cost centre field in sales order account assignment screen

Hello all,
I am unable to find the settings for cost center field in sales order account assignment tab screen along with profit center and internal order. kindly let me know the path to select cost center.
Thanks in advance
Raju

The Cost Center Determination settings is in OVF3 - but there are some cases where the Cost Center must be exceptionally changed.
If the document category for order type in IMG VOV8 is defined to be "I" which belong to order type FD - Deliv.Free of Charge, then the field cost center is active for input during transaction VA01.
Alternatively, you can specify an order reason and assign a cost center to an order reason.
However the standard SAP works only at the header level though, so it would not work if cost center is needed on the line item.
The cost center are assign for such business transactions as :
- Free deliveries
- Returns
- Deliveries of advertising materials
You can also make cost center allocation dependent on the order reason, for example:
Order reason: Damage in transit
Order reason: Free sample
Both the IMG settings are done in transaction OVF3, either with/without the order reason.

In Milestone billing WBS elet field not visible in Account assignment tab

Hi Gurus,
Could you pls let me know how to make WBS element field to display in Account assignment tab (Item details of Sales order).
During Milestone billing in Billing plan tab WBS element is getting displayed where in for Account assignment tab it is not.
But for TAD (Service) and TAX(non stock) this WBS element field is viewable in Account assignment tab.
Pls suggest me if any transaction variants are required for this or not? Or else pls provide solution to sort out this issue.
Thanks in advance
regards....Divakaran

Hi Divakar,
refer this thread
wbs field in account assignment

ME22N - Make fields display only.

Hi gurus,
I have the following requirement I don`t know how to solve so well...
We´ve created a new purchase order type and we need a little special behaviour for it.
At creation (ME21N) all fields must be ready for input, in the same way that the other PO types.
However, in modification (ME22N) we need some fields unavaible for input, just display.
This fields are: Payment Terms (At header level) and Delivery Date (At Position level).
I've trying some user-exits, but I havent found the way to implement this behaviour.
Because of that, I`ve trying to let the fields available for input in ME22N and check values at save, showing a message in case of changes. Could anybody recommend me which user-exit use for this verifications?
Once again, a lot of thanks!

Hi Ole,
Did you tried screen variants.Please check this lik want to make few fields as display only in ME21N Check this and tell if need more hlep in this.
Regards,
Madhu.

Form Field Display Only

Is there anyway within ADDT to specify a form field that is input on insert but display only on update? Marking the field read-only makes it so for both. I would like to let the user input the data, not be able to change it, but still see it for reference.

If I understood correctly you want to allow the user to input data on insert but only be able to see the field value on update. You can make a form field available on insert/update/or both and have it display as text (so that the user can see if for reference but not be able to change it) by clicking on the Manage Dynamic Form wizard icon in the Developer Toolbox bar and changing the corresponding settings.
<br />These options however don't cover your scenario as you want the field to be editable on insert only. I tried tweaking the generated ADDT code but it didn't work. The only other way to do this that I can think of would be to add the read-only attribute dynamically, that is on update only. The code to add to the field would simply be:
<br /><%If Request.QueryString("ID") <> "" Then Response.Write("readonly='readonly'")%>. This code simply checks to see if a record ID is being passed to the dynamic form page and if it is then we know we're on an update page so the readonly field attribute is added (I code in VBScript so the code might be slightly different in your case).

Display standard Field Profit Center in Account Assignment Tab

Hello all,
i have a problem regarding display a standard field.
The Business Case is that when i create a new shopping cart, on item level, on tab account assignment i want to display the field profit_ctr.
i thought that i can maintain this in SPRO.
Configure Field Control -> Configure for Fields of Substructures -> Metadata for Fields of Substructures and Table-Like Enhancements
with new entry
31 PROFIT_CTR BUS2121
but i can see this field when i create a new shopping cart.
You have an Idea how to configure this ?
greetz Chris

Hi,
Check SPRO configuration for account assignment settings @
SRM server->cross application basic settings->account assignment->Define account assignment
1. Check for your acc assignment category for ex. WBS , what are account assignment fields are maintained.
if not there maintain profit_ctr from search help.
2. If you are not able to track profit_ctr in search help then you may need to make respective profit center entry in table BBP_C_ACC_F and then perfom step 1.
after above steps even you are not able to get profit center on screen then you may need to check
1. Meta data configuration
2. WDP component for profit_ctr field
Regards
-Vipin

How to make form field read only for users with certain permissions

We need to make two form fields read only for users with certain permissions. Kindly guide me on how to do this in Infopath. I searched and there is an option to disable to the column, but no option to select user permissions.
Please give your suggestion on this.
thanks.

Hi,
See the link below:
http://info.akgroup.com/blog-0/bid/69277/InfoPath-Restrict-visibility-to-users-in-a-SharePoint-Group
Here you can add the fomatting action on the field to disable the field if those users belong to certain Sharepoint group (does not matter the permission levels though). Hope it helps.
Regards, Kapil ***Please mark answer as Helpful or Answered after consideration***

Quantity field display only in ME52N

Dear Experts,
Our requirement is to restrict any change in PR qty through ME52N.
I have done the changes in field selection group ME52, but still the field is not in display mode.
Kindly siggest what all field selection groups involved when ME52N transaction is executed.
As per my understanding;
I checked AKTV-Optional,ME52-Display and NBB-Mandatory...result should be display but the result is still optional.
Also as per rule combination of display field with any other mode results display only(except suppressed).
Is it getting overruled through hard coded standard programs...kindly advise.
Regards

SAP-MM wrote:
Dear Experts,
> Our requirement is to restrict any change in PR qty through ME52N.
> I have done the changes in field selection group ME52, but still the field is not in display mode.
>
> Kindly siggest what all field selection groups involved when ME52N transaction is executed.
> As per my understanding;
> I checked AKTV-Optional,ME52-Display and NBB-Mandatory...result should be display but the result is still optional.
>
> Also as per rule combination of display field with any other mode results display only(except suppressed).
> Is it getting overruled through hard coded standard programs...kindly advise.
>
> Regards
hi,
please change in me52n not in me51.
and come to me52n
select other purchase requsion
given your requsion number and click on change / display option then it displiedin change mode
Thanking you.

ME52N Make services sheet display only

Hi All.
When I execute TCode ME52n and one of the conditions on a field is met I want the services tab to be display only. I cannot use a different document type for this. Any suggestions.
Regards
Justin

Welcome to SCN,
Possible way will be find a screen/user exit in ME52N and code
if <your-field> eq 'XXX'.
loop at screen.
   if screen-name = 'SERVICE TAB FIELD'. " Give the service tab field name
      screen-input = '0'.
      modify screen.
   endif.
endloop.
endif.
a®

Display mode for Account assignment category for NB document type

Dear MM gurus,
Is it possible to have Account assignment category field in ME21N for document type NB to be display only. Could any one please advised if this is possible?
Thanks in advance.

Hi,
Yes it is possible. But u have to define ur own Field selection for the PO document type and u have to assign it in the document type NB. Go to SPRO>IMG>MM>Purchasing>Purchase Order-->Define Screen Layout at Document Level

Display only in Items assignement block

Hi experts.
I have a requirement where one of the columns of the "items" assignment block should be made display only.
I used the transaction bsp_wd_cmpwb to configure - but as this is a table view I don't have the option for display only (generally available for over view page. I am specifically looking for Product description in the items assignment block.
Can this be done by configuring. Do I need to code any thing. if yes please suggest how.
Thank you
Ram

Hello Ram,
Did you try to redefine method GET_I_xxx of your DESCRIPTION field already?
Check out if adding this line of code can do the trick:
rv_disabled = 'TRUE'.
Regards,
Nicolas Busson.

ML81N Make FM fields display only in account assignment

Similar Messages

Maybe you are looking for