ML81N & MB21 User exit?

Dear Gurus,
While creating Service Entry sheet (ML81N) - what the user exit?
while Create reservation MB21 - whats the user exit?
Please advice
Regards
RS

Please check user exit EXIT_SAPMM07R_001for MB21
User exit for ML81N
EXIT_SAPLMLSR_020
EXIT_SAPLMLSR_021
you may like to search more on the forum depending upon your specific requirement.

Similar Messages

  • MB21 user exit or add in

    Hi
    There is an user exit or add in  that validates the information field "good recipient" in the transaction MB21 to the vendor table LFA1?
    Thanks and regards.
    Edited by: buck485821 on Sep 7, 2010 8:45 PM
    Edited by: buck485821 on Sep 7, 2010 8:46 PM

    Hello,
    You could review MB_RESERVATION_BADI.
    Regards
    Waza

  • Need User exits for MB21

    Hi Folks,
    I have designed custom screen for MB21 transaction which calls the standard screen.
    I want to pass some data from the custom screen to the standard screen but for that i need a user exit to do the same
    I tried get/set parameters but they work only for next screen, but i am skipping first screen so it is not working.
    I need exits for passing value for these fields - Order Number, WBS Element, Cost Center and Goods Recepient(WEMPF).
    Please help.
    Thanks
    Varun

    Hi varun,
    MB_CF001
    MBCF0002
    MBCF0005
    MBCF0006
    MBCF0007
    MBCF0009
    MBCF0010
    MBCF0011
    these are available user exit for MB21.
    Regards,
    vijay

  • Need User Exit  for ML81N SAVE

    Scenario: Track employee id wise payments using SES ORDER field
    A.     To track employee Id in Service Entry Sheet (SES)
    Payments such as Mobile bill, OYC allowance is made against Service Purchase Order.
    1)      In SES, user will enter employee Id in field AUFNR i.e. Order.
    2)     Create z-table to maintain Expense GL A/c
    3)     While Save, get Service POu2019s GL A/c, validate in Z-table. If exists, then validate entered employee id.
    Is there any user exit which we can use while SAVING ML81N.

    Hi,
    I would advice you to use the user defined fields in table ESLL instead, like        
      ESLL-USERF1_NUM   User-Defined Field                                     
      ESLL-USERF2_NUM   User-Defined Field                                     
      ESLL-USERF1_TXT   User-Defined Field                                     
      ESLL-USERF2_TXT   User-Defined Field                                                                               
    and develop a custom solution with the help of customer enhancement          
    SRVDET.
    Regards,
    Edit

  • User exit or BADI after saving in ML81N

    Hi,
    I have created a Custom tab at header level in ML81N. In this tab the user enters the data which is to be stored in Ztables once the entry sheet is successfully saved. I am searching for BADI or user exits for saving the data. Can anyone tell me user exit or BADI which is triggered after saving the data?
    Thanks in advance.

    Hi Poorvi,
    Please get your results from the search.
    http://www.sdn.sap.com/irj/scn/advancedsearch?query=userExitBadiML81N

  • User exit on MB21

    I wish to restrict my user to use only 3 movement types 201 241 & 261 in MB21.
    As i defined a user exit it give following error
    The project contains inactive include tables.Wht to do next.
    I'm using MBCF0005 enhancement.
    Please guide.

    Hi,
    Hope you are using the below Function Modules.
    EXIT_SAPM07DR_001
    EXIT_SAPM07DR_002
    And have activated the project and the components.
    If you have activated a customer Include CI_AM07M then you will need to activate your Customer Include and also your table or Structure.
    Hope this resolves your problem. If not can you please paste the ST22 dump records for us to analyse as the message what you have written does not give us any clue what would have caused the problem.
    Hope this helps you.
    Help Children of U.N World Food Program by rearding with points and also encourage others to answer your queries
    Thanks
    Venugopal

  • User exit for ML81N

    Hi all,
    I am looking for user exits for T code ML81N, where in I want to validate 2 fileds i.e. net value inclusive of tax ESSR-NETWR and
    PRsp. Intern ESSR-SBNAMAG.
    I have tried all the exists available in SMOD for the develoment class.
    can any one tell me how to solve this.
    Best Regards
    Sree

    Hi,
    Try to check any BADI's Available.
    to find the user exits & Badi's for the T-code..
    go to table TSTC>enter T-code and execute> get the Program for the t-code..
    and go to-se38-->get the package attached to the t-code..
    next go to t-code Se15>expand the enhacement tab>enter package under userexit and
                                                         execute you will get the list of exits
                                                         available...
                                                      -->enter package under Badi's tab and
                                                         execute you will get the list of Badi's
                                                         available... 
    All the User exits are stored in Table MODSAP..
    Prabhudas

  • User Exit for ML81N - Goods Receipt

    Hello,
    I need to populate BSEG-XREF1 and BSEG-XREF2 with custom values from ML81N - Can't find a BADI or User exit - is there one?
    Many Thanks

    Should able to do it with FI substitution:
    Transaction Code: OBBH
    1. Create a substitution
    2. Create a Step and Define the pre-requisites eg: document type
    3. Create the substitution rule. You can create an exit and use it
    For more information on creating and maintaining substitutions, see Financial Accounting -> Special Purpose Ledger -> Validations and Substitutions -> Substitutions in the SAP Library.

  • Regarding user exit of Service Entry (ML81N)

    Hi All,
    I have small issue of Service Entry(ML81N).
    These are the following enhancements for Service Entry.
    SRVDET, SRVEDIT,SRVESI, SRVESKN,SRVESLL,SRVESSR,SRVEUSCR,
    SRVKNTTP,SRVLIMIT,SRVMAIL1,SRVMSTLVSRVPOWEB,SRVQUOT,SRVREL,SRVSEL.My requirement is i have to send Service entry sheet no and posting date and some fields to .net application (after save the transaction) I tried the above enhancements using break point. But no enhancements are fired after save.  Some enhancements(SRVDET, SRVESKN,SRVEUSCR,SRVSEL) r triggered before save. But i need the enhancement and user exit which is fired after click on save button in transaction. Is there any other enhancements there? Plz help me any one familiars this one.
    Regards,
    Ravi Kumar

    Hi All,
    I need to add tab (along with few fields) on ML81N and need to pass the data in ESSR table.
    I am using enhancement - SRVEUSCR, thru which i am able to display tab on screen.
    But i am not able to capture value enter on screen in function modules:
    EXIT_SAPLMMSK_020 AND EXIT_SAPLMMSK_021.
    I have added fields in structure - CL_ESSRDB and using the same fields in new customer screen in SE51.
    Please assist and let me know where i am going wrong.
    Thanks
    Rajesh

  • User exit ML81N.....Name of user exit to trigger 'Release Strategy'..urgent

    Hi Guys,
    ML81N work in a manner such that if the net amount for any PO/Service entry is less than $2500 then its 'Release Strategy' tab is not active.
    I have a requirement where i have to make that tab active and select the Lowest Release Strategy when the amount is less than $2500.
    Can anyone please tell me the name of the user exit that controls the 'Release strategy'.
    Points will be awarded...
    Thanks
    Rahul

    Hi
    Your settlement rule says "Settle to Cost Center" only.... I dont think any user exit can help in this case, if you want to settle occasioanlly to 2 cost objects
    Try with these options
    Option A
    1. Remove the 100% validation tick in the settlement profile...
    2. Maintain 2 settlement rules... i.e. One with Cost center and another with PSG... If any warning comes, ignore it
    3. Execute settlement now
    Option B
    1. Maintain settlement rule with PSG as settlement receiver
    2. In the same Settlement rule, Menu GO TO > DETAILS and maintain Cost Center also....
    3. Now execute settlement...
    Option C
    1. Maintain settlement rule with PSG as settlement receiver
    2. In the same Settlement rule, populate Cost Center also as a Valid Characteristic
    3. Now execute settlement...
    BR,Ajay M

  • User Exit for ML81N  at the time of save -- urgent

    hello all,
    I need to fill the field reference field in ML81N transaction with some value for this i need to find user exit i was able to find so many user exits for this transaction but i couldn't find the perfect user exit at the tiem of save,
    Any pointers wouls be of great help..............

    Hi,
    check these 2 threads.
    User exit in ML81N
    Urgent. Badi or user exit for ML81N transaction
    Regards,
    Maha

  • User-Exit / Badi  for ML81n (create service entry sheet)

    Dear experts,
    I am looking for a User-Exit / Badi  for ML81n (create service entry sheet),  which will enable me to compare its date with the referenced PO's item's delivery-date,   befor saving ,  and send an error message (with no update) if the check is not OK.
    Remark :  I have tried MB_DOCUMENT_BADI   but with no success because you can't send an error message from it.
    Thank you
    Yaacov

    hi check below thread
    User-Exit for Service Entry Sheet via ML81N?
    regards
    vijay

  • User Exit or BADI for ml81n - Service Entry Sheet

    Hi all,
    I would like to find a user exit or BADI or enhancement upon saving.
    The requirement is posting to specific GL A/C from the Service No. given.
    Please don't provide me a list of unnecessary user exit or BADI.
    Urgently need for solution, Thanks.

    Hi,
    Check out the various exits for ml81n
    INTERFAC            Interface for data transfer
    SRVDET              User screen on tab strip of service detail screen
    SRVEDIT             Service list control (maintenance/display)
    SRVENTRY            Unplanned part of entry sheet (obsolete since Rel. 3.1G)
    SRVESI              Data conversion entry sheet interface
    SRVESKN             Set account assignment in service line
    SRVESLL             Service line checks
    SRVESSR             Set entry sheet header data
    SRVEUSCR            User screen on entry sheet tabstrip
    SRVKNTTP            Setting the account assgnmt category when reading in, if
    SRVLIMIT            Limit check
    SRVMAIL1            Processing of mail before generation of sheet
    SRVMSTLV            Conversion of data during importing of standard service c
    SRVPOWEB            Purchase order for service entry in Web
    SRVQUOT             Service export/import for inquiry/quotations
    SRVREL              Changes to comm. structure for release of entry sheet
    SRVSEL              Service selection from non-SAP systems
    SRV_FRM             SRV: Formula calculation (obsolete since 4.0A!)

  • User exit for (reference field) XBLNR check in ML81N

    Hello,
    We would like to implement a duplicate check on the reference field: XBLNR in ML81N. This would be to prevent users from posting duplicate service entry sheets.
    Has anyone done it with SRV* user exits?
    Thanks,
    Richard

    Hi,
    Following are the list of user exits available for ML81N
    SRVDET             User screen on tab strip of service detail screen
    SRVEDIT             Service list control (maintenance/display)
    SRVENTRY            Unplanned part of entry sheet (obsolete since Rel. 3.1G)
    SRVESI              Data conversion entry sheet interface
    SRVESKN             Set account assignment in service line
    SRVESLL             Service line checks
    SRVESSR             Set entry sheet header data (This might be helpful)
    SRVEUSCR            User screen on entry sheet tabstrip
    SRVKNTTP            Setting the account assgnmt category when reading in, if "U"
    SRVLIMIT            Limit check
    SRVMAIL1            Processing of mail before generation of sheet
    SRVMSTLV            Conversion of data during importing of standard service cat.
    SRVPOWEB            Purchase order for service entry in Web
    SRVQUOT             Service export/import for inquiry/quotations
    SRVREL              Changes to comm. structure for release of entry sheet
    SRVSEL              Service selection from non-SAP systems
    SRV_FRM             SRV: Formula calculation (obsolete since 4.0A!)
    INTERFAC            Interface for data transfer

  • User Exit for ML81N (Service Entry)

    Hi All,
    I need user exit for Service Entry Sheet(ML81N). So which user exit is fired when run the transaction after save(ML81N). Please help me urjent.
    Thanks & Regards
    Ravi Kumar

    Hi All,
    I am having similar problem with ML81n. I need to add tab (along with few fields) on ML81N and need to pass the data in ESSR table.
    I am using enhancement - SRVEUSCR, thru which i am able to display tab on screen.
    But i am not able to capture value enter on screen in function modules:
    exit_saplmlsr_020 AND exit_saplmlsr_021.
    I have added fields in structure - CI_ESSRDB and using the same fields in new customer screen in SE51(Screen fields named as ESSR-Field1 (field1 is added in CI_ESSRDB )).
    Please assist and let me know where i am going wrong.
    Thanks
    Rajesh

Maybe you are looking for