MLB.TV nothing but blur after Upgrade

I have always had a bit of a love-hate relationship with MLB.TV on the Apple TV but for most of this season, with the occasionally glitch or buffer it has been OK. That was up until last Friday night when I did the update on my 3rd Gen. Now the moment you login to a game, the poor image becomes unwatchable. In the past, during those brief moments of poor picture, you could "ride it out" in a minute or two. I let the game run about 5 min last night and it never improved. I'm getting a steady 6-8 Mbps (via wired ethernet) and all my other apps play fine. It is only with MLB (the even more pathetic thing is I can bring up a game on my iPad and airplay it to the AppleTV and it is fine.
I'm sure both Apple and MLB will say the problem is either the other's fault or that I don't have enough bandwidth. Clearly I do and although MLB has had issues, this certainly seems to be directly related to the update last week.
Has anyone else had this problem recently and has anyone discovered a solution (beyond Airplaying from an iPad...which I will likely end up doing from here out since the season will be over on Sunday anyway)?
Very disappointing...

The upgrade took that feature on my iphone4 but is still there on my ipad2

Similar Messages

I have had nothing but problems after downloading Lion and turning on ICloud. Can anyone tell if I can delete photos from Photostream and if not why not! it is infuriating

I have had nothing but problems after downloading Lion and turning on ICloud. Can anyone tell if I can delete photos from Photostream and if not why not! it is infuriating

PhotoStream is purely a conduit for transferring pictures added to or taken on one device onto all the others seamlessly. Photos are held there only for 30 days. There is no way of accessing, viewing or deleting individual photos; you can reset the entire Photostream, erasing everything.
http://support.apple.com/kb/HT4890

Nothing is installing after upgrading to Snow Leopard. Why?

I recently bought the new OS software and the installation was successful. But soon as I start to run my new platform I realized the applications were not getting installed. I mean, new applications (even Apple software like updates) are not finishing the installer process. Whenever I click "Install" the system seems to stop the process. The button turns greyed out for a little while and soon become active again. But it doesn't continue the job.
Does anyone have seen something like that? Any help is appreciated. Thanks in advance.

Update:
This week I tried to solve this problem using the Disk Utility from the Snow Leopard. It showed me different results from the ones when I used the Disc that came with my machine (Mac OS X Installation Disc 1 - Mac OS version 10.5.4). When I ran the option 'Verify Permissions' the system returned something like:
"Warning: The file SUID "System/Library/CoreSer.../ARDAgent" was modified and will not be repaired" (I don't know the exact message because I have a portuguese version).
And other 2 entries which a directory on Applications folder had a write("w") permission and the system has indicated that the correct permission was a "-".
I did the 'Repair Permissions' utility and then I also performed a 'Repair Disk'.
After that I proceeded with a new install which was successful but the errors weren't fixed. I'm still not able to install anything - even the fix packs! Either I can't change from my Account to another or apply any modifications on the other accounts.
Right now I'm searching on Google the error described above. Also, I don't know whether this subject is directly linked to the main problem of my concern: the installation of new programs. If anyone has any hints or tips, let me know.
My very thanks in advance.

At first I could open 2 tabs with the same program but now after upgrading to Forefox 4 I can't anymore! Why not?

I miss it because sometimes I want to open a program twice for example to keep on listening to the music from it.

Place your phone in DFU mode (search google for instructions) and restore as new.
If this doesn't work, you'll need to bring your phone into Apple.

Macbook Pro will not boot from any source after upgrade

Hi,
I have a late 2011 Macbook Pro - standard issue other than more memory as I recall. It has a 750MB hard drive with more than half still free. All the checks given below are done with the computer stand-alone with no hardware attached - other than the power cord and of course WiFi.
2 weeks ago I upgraded to Yosemite having taken all the right precautions before upgrade - thanks to Take Control. It worked fine and I was getting a good experience until last Wednesday when I put it to sleep by closing the lid. Later in the day I opened it up again but only got a grey screen. After leaving it several minutes to see if it cleared I shut down by holding the on button for several seconds then tried to re-boot. The computer starts and gets as far as the grey screen then shuts down again after several minutes. Sometimes it will continue to restart after shut down and keeps doing this until I again hold the on button in until it finally shuts down for good.
I have two bootable drives - one is a cloned backup of the previous version and all the data, the other is an 8GB thumb drive with a bootable version of the Yosemite installer. For the record I also have a Time Machine backup and a second full clone backup and recovery drive on a Synology NAS device - I just haven't figured out how to boot from this device as yet.
I can get to the boot up selection screen (hold option key) and select an external drive to boot from but it makes no difference - I still get the same grey screen. Same thing if I use Command +R to boot from the Mac HD recovery partition.
I have also tried to boot into safe boot mode (hold the shift key down). This seems to slow everything down but ultimately has the same result - a grey screen.The only difference I can see is that this grey screen does not shut down after a time. Seems to just continue until I shut it down manually.
I can hold Command +V to remove the grey screen and see the action being written to the screen while logging on (white text on a blue screen) - up to a point. After some time I just get the same grey screen and it shuts down after more time. I can also use Option +D (I'm told it should be just hold the 'D' key to do this but that has never worked for me and Option +D does) to get to the hardware check and I have run this both before upgrading and after having the problem. Before upgrading I got one error - 4ETC/1/40000002. I looked this up on the Internet and could find nothing specific to identify the problem and the general consensus seemed to be it was nothing major. After upgrading and running the hardware check again (after this problem occurred) it returned no errors.
I have reset the PRAM with the same result as before - all I get is the is the Apple logo and a progress bar that increases to around 50%, then both disappear and I get just a grey screen. After a time the computer shuts down and then restarts again and goes through the same process.
I've done pretty much everything I can think of and find in books and on the Internet. Hoping that someone out there will find this problem interesting and help me to resolve it.
Tony

Problem resolved. I took the machine into an authorized repair facility where, for around $30, I had it checked and the logic board replaced. Picked it up yesterday and seems to be working OK. No cost to replace the logic board even though the machine is over 3 years old. There seems to be some sort of dispute with Apple over a class action that has worked in my favour. Great. I'm happy.
Tony

Iphone 3gs problem with network after upgrading to 5.1.1

Hi...
I have Iphone 3gs and requested official unlock from my provider. They said they did it and all I have to do is connect it with iTunes.
I had ios 3.x and upgraded to 5.1.1 through iTunes.
But now after upgrade, my phone is not unlocked and niether works with original card.
3G network is one second ok, after one second drops to 1 line, and after that I got No network.
I managed to make call, but that call only last for 1 second.

I wouldn't assume that. Don't know anyone who changed carriers without canceling the original. The intermittent connections he describes are typical of SIM card issues.
The point is that your statement that "updating is not enough" is incorrect. When he "updated" to iOS 5, a full restore was already done. If there were errors during that process, restoring again might help, but its not necessary to restore.

AddressBook Hang after upgrade to 10.7.2

I have used AddressBook in 10.7 and upgraded to 10.7.1 seamlessly.
I mostly use it to sync from my Gmail contact. But recently after upgrade to 10.7.2 It says It support iCloud and I am no need to sync with Google anymore. ????
But from what I see all my contact from Google still there. While newly created contact on iCloud keep update in my AddressBook.
But it perform very strange. cannot search and sometimes hang up.
I can't remove my previous gmail account in preference because it disappeared. only iCloud is my current option.
Any helppppppp.
PS. I mostly want to have my Gmail contacts and iCloud in sync. If it both copied I can ensure everything have its backup online.

I have used AddressBook in 10.7 and upgraded to 10.7.1 seamlessly.
I mostly use it to sync from my Gmail contact. But recently after upgrade to 10.7.2 It says It support iCloud and I am no need to sync with Google anymore. ????
But from what I see all my contact from Google still there. While newly created contact on iCloud keep update in my AddressBook.
But it perform very strange. cannot search and sometimes hang up.
I can't remove my previous gmail account in preference because it disappeared. only iCloud is my current option.
Any helppppppp.
PS. I mostly want to have my Gmail contacts and iCloud in sync. If it both copied I can ensure everything have its backup online.

.PS file generating a blank PDF after upgrade from Acrobat Pro 7 to 9

Hi All,
I've searched for this in vain so I'm comming to you now in desperation. My boss has tasked me with tracking down this error and I have to be honest, I'm a little bit green with Acrobat Pro. So coming into the situation I know this. My department used to use a .ps file to build a publication into a PDF from other .ps files. We operate on a network share (the P: drive) on Windows XP SP3 machines with the latest updates.
In Acrobat Pro 7 we could double click the .ps file which executed the below code through Adobe Distiller and a finished PFD of the same file name would be output to the host directory. But now, after upgrading to Adobe Acrobat 9, this process only produces a PDF with all of the appropriate bookmarks and none of the content.
% PostScript program for distilling and combining multiple PostScript files.
% When embedding font subsets, it is highly recommended you use this technique
% to distill multiple PS files so only one font subset is used for each font.
/prun { /mysave save def       % Performs a save before running the PS file
        dup = flush            % Shows name of PS file being run
        RunFile                % Calls built in Distiller procedure
        clear cleardictstack   % Cleans up after PS file
        mysave restore         % Restores save level
} def
[       /Author (User)
        /CreationDate ()
        /Creator ()
        /Title (Title)
        /Subject (Subject)
        /Keywords (Words)
/DOCINFO pdfmark
[       /PageMode
        /UseOutlines
/DOCVIEW pdfmark
[    /Page 1
    /View [/XYZ null null null]
    /Title (Cover Page)
/OUT pdfmark
[    /Page 2
    /View [/XYZ null null null]
    /Title (Page 1)
/OUT pdfmark
[    /Page 3
    /View [/XYZ null null null]
    /Title (Page 2)
/OUT pdfmark
[    /Page 4
    /View [/XYZ null null null]
    /Title (Page 3)
/OUT pdfmark
[    /Page 5
    /View [/XYZ null null null]
    /Title (Page 4)
/OUT pdfmark
[    /Page 6
    /View [/XYZ null null null]
    /Title (Page 5)
/OUT pdfmark
[    /Page 7
    /View [/XYZ null null null]
    /Title (Page 6)
/OUT pdfmark
[    /Page 8
    /View [/XYZ null null null]
    /Title (Page 7)
/OUT pdfmark
[    /Page 9
    /View [/XYZ null null null]
    /Title (Page 8)
/OUT pdfmark
[    /Page 10
    /View [/XYZ null null null]
    /Title (Page 9)
/OUT pdfmark
[    /Page 11
    /View [/XYZ null null null]
    /Title (Page 10)
/OUT pdfmark
[    /Page 12
    /View [/XYZ null null null]
    /Title (Page 11)
/OUT pdfmark
[    /Page 13
    /View [/XYZ null null null]
    /Title (Page 12)
/OUT pdfmark
[    /Page 14
    /View [/XYZ null null null]
    /Title (Page 13)
/OUT pdfmark
[    /Page 15
    /View [/XYZ null null null]
    /Title (Page 14)
/OUT pdfmark
[    /Page 16
    /View [/XYZ null null null]
    /Title (Page 15)
/OUT pdfmark
[    /Page 17
    /View [/XYZ null null null]
    /Title (Page 16)
/OUT pdfmark
[    /Page 18
    /View [/XYZ null null null]
    /Title (Page 17)
/OUT pdfmark
[    /Page 19
    /View [/XYZ null null null]
    /Title (Page 18)
/OUT pdfmark
[    /Page 20
    /View [/XYZ null null null]
    /Title (Page 19)
/OUT pdfmark
[    /Page 21
    /View [/XYZ null null null]
    /Title (Page 20)
/OUT pdfmark
[    /Page 22
    /View [/XYZ null null null]
    /Title (Page 21)
/OUT pdfmark
[    /Page 23
    /View [/XYZ null null null]
    /Title (Page 22)
/OUT pdfmark
(p:/ps/pdf/cover.ps) prun
(p:/ps/page2.ps) prun
(p:/ps/page3.ps) prun
(p:/ps/page4.ps) prun
(p:/ps/page5.ps) prun
(p:/ps/page6.ps) prun
(p:/ps/page7.ps) prun
(p:/ps/page8.ps) prun
(p:/ps/page9.ps) prun
(p:/ps/page10.ps) prun
(p:/ps/page11.ps) prun
(p:/ps/page12.ps) prun
(p:/ps/page13.ps) prun
(p:/ps/page14.ps) prun
(p:/ps/page15.ps) prun
(p:/ps/page16.ps) prun
(p:/ps/page17.ps) prun
(p:/ps/page18.ps) prun
(p:/ps/page19.ps) prun
(p:/ps/page20.ps) prun
(p:/ps/page21.ps) prun
(p:/ps/page22.ps) prun
(p:/ps/page23.ps) prun
% INSTRUCTIONS
% 1. Locate all PostScript files to be distilled.
% 2. Make a copy of this file and give it the name you want to have as the prefix
%    for the resulting file. For example, you could name this file MyBook.ps.
% 3. Include a line for each PostScript file to be run using the pathname syntax
%    appropriate for the platform running Acrobat Distiller.
%       Macintosh pathname syntax: (Macintosh HD:Folder:File.ps) prun
%       Windows pathname syntax:    (c:/mydir/file.ps) prun
%    UNIX pathname syntax:        (./mydir/File.ps) prun
%       Note: The syntax for Windows may look strange, but double escaping the
%             backslash character is required when using filenameforall.
% 4. Distill the file on the machine running Acrobat Distiller.
After the process is "done" the following log file is generated.
Acrobat Distiller 9.4
Started: Monday, October 18, 2010 at 13:32:05
Adobe PostScript software version: 3018.101
Start Time: Monday, October 18, 2010 at 13:32:06
Source: publicationtest.ps
Destination: C:\Documents and Settings\User\Desktop\usfdtest.pdf
Adobe PDF Settings: C:\Documents and Settings\User\Application Data\Adobe\Adobe PDF\Settings\High Quality Print.joboptions
c:/ps_script/cover.ps
c:/ps_script/toc.ps
c:/ps_script/page3.ps
c:/ps_script/page4.ps
c:/ps_script/page5.ps
c:/ps_script/page6.ps
c:/ps_script/page7.ps
c:/ps_script/page8.ps
c:/ps_script/page9.ps
c:/ps_script/page10.ps
c:/ps_script/page11.ps
c:/ps_script/page12.ps
c:/ps_script/page13.ps
c:/ps_script/page14.ps
c:/ps_script/page15.ps
c:/ps_script/page16.ps
c:/ps_script/page17.ps
c:/ps_script/page18.ps
c:/ps_script/page19.ps
c:/ps_script/page20.ps
c:/ps_script/page21.ps
c:/ps_script/page22.ps
c:/ps_script/page23.ps
Distill Time: 00 Hour(s) : 00 Minute(s) : 00.390 Second(s)
**** End of Job ****
Is there anything obvious about this that screams, "You're an idiot!"? I'm okay with that, just need to get it fixed.
Thank in advance for any help you can provide.
Michael

An observation -
It looks like you are dealing with files that reflect someone's work with the pdfmark Reference (associated with Distiller).
As with Acrobat Security, JavaScript and the Acrobat SDK the 'how-to' from these all undergo changes with each new Acrobat release.
I suspect that the coding, while adequate for back when Acrobat 7 was new on the street, may have to be updated to comply with what the Distiller provided with Acrobat 9 supports.
Use the link for pdfmark Reference
http://www.adobe.com/devnet/acrobat/wwdistiller.html
The Acrobat Developer Center ( http://www.adobe.com/devnet/acrobat.html ) provides a hub to the myriad of "under-the-hood" aspects of Acrobat.
Be well...

Cell Definition and Reverse sign Issue after upgrade

Hi ,
we are having a issue here after upgrade to BI 7 from 3.1c .
There is a Collision between Cell Definition and Reverse sign in the query designer.
Issue is . We have Key Figure "Net Days AR" which has Reverse Sign Checked under properties. In 3.1c when we ran the report the Net Days AR would get value like for example -40 . but now after upgrade to BI 7 SP 16 we are getting value 40. the negative sign is missing. The formula is correct.
I went and checkd if we have any cell definitions defined on this and found the cell definitions onthis keyfigure.
values are comming correct if there are no cell definitions.
Thanks in Advance and Points will be awarded.
Thanks,
Reddy

we have the same problem. In BI 2004s with BEx 3.x when the cell reference is defined, the reverse sign flag is ignored.
I opened a message to SAP. Until now no solution and I think we'll never receive solution. Here are the answers we received:
SAP
I have to say this is the limitation of front end 3.5.
In designer 3.5, it works this way:
When you define a cell referance, this cell is blocked from change of the column property change. No matter how you change the column key fig proerty, it keeps the original status when you define it.
If you want the defined cell property, you need to delete the cell
referance, change property, then redefine the referance.
I agree this is very inconvinience, that's why I would recommend you to use query designer 7.0 if possible. With 7.0 front end, you can define separately the property for defined cells. It is more flexible.
ME
At the moment it is not possible to migrate to 7.0 frontend.
I tried to delete the cell reference, change properties and redefine the reference. I tried to create new columns, define cell properties, save and define the cell reference. I tried several different combinations...
No way, as soon as I define the cell reference, column properties are ignored.
1) How can we restore the correct behavour of a query in frontend 3.5?
2) If we found a way to restore it, we need a smart procedure to modify all our existing queries (including how to identify those affected by this inconvenience).
SAP
For front end 3.5, you need do following:
1. delete cell referance
2. change the column property (such as tick on or off the sign reversal)
3. re-define the cell (this cell will with the new sign status)
4. define formular base on cell
After step 3, you can't change cell property whatever you do in
column property. This is the designed behavior.
If you want to change property after step 3, you need to start
all over from step 1.
ME
I did it.
Don't work. When I define the cell reference, column properties are ignored.
SAP
It seems there is some issue in front end.
Do you use the front end 3.5 with latest patch?
Could you please check front end installation as per sapbexc.xla (described in note 197460). If there are problems shown within this check do the following:
- Remove your frontend via 'START' - 'PROGRAMS' - 'SAP FRONTEND' -'REMOVE SAP FRONTEND'
- Install the lastest frontend and GUI patch (according to note 496977or 496989 again and check the installation).
ME
I don't think so. I am using:
Sapgui 7.10 Patch 8
Bex 3.50 Patch 3
Bex 7.x Patch 5
to be continued...

Selection scren problem after upgrading from BW 3.0 to 3.5

hi,
We recently upgraded from 3.0 to 3.5. We haev a workbook with 8 queries and we used to get only one selection screen for all the queries(we one slection query which has all the variables of other queries) on refresh of all queries.But now after upgrading we get screens for each query.Any solution pls.
venku

hi deepak,
Can u help me more on this issue of finding the OSSNotes.I dont know where to find this.
thank you
kranthi

Our application timeout when load testing after upgrading to OEL 4.8

Hi,
We recently have an upgrade from OEL 4.7 to OEL 4.8. Our application is running fine on OEL 4.7, but since after upgraded to OEL 4.8, it fails pretty frequently with timeout error when doing load testing (20+ users).
Any ideas what can be the possible causes?
Please advise.
Thanks
-Mina

You're not giving much info.
If it is networking related, the first think i would check is to make sure the network interface is configured properly. For instance, if your computer's NIC is set to auto and your network port on the network switch is set to fixed, then you will drop packages at high load due to errors on the interface. Those errors cannot be seen from the switch. Set both to auto or fixed, but it needs to be set to the same. Auto is standard and should work unless you have some strange equipment. Also replace the networking cable with a new one.

No acces to Time Capsule as a disk after upgrading to 10.5 Leopard...

Hi guys - I have serious issue on my Mac Mini and MacBook Pro. My Time Capsule is used as WiFi base station and it works perfectly in that role. But I can not access it as a disk! I was doing it without previously but not after upgrading to Leopard ... only problems... I can see TC in the list of shared drives but can not access it. I also can not access airport express which I'm going to use to stream music wirelessly. All that happened after update and change in internet provider. Saying once more - internet works perfectly on all computers, iPod etc. But no access to disk and other airport express... please help. I screwed up probably something on settings...
Daniel

Is it possible to transfer the iTunes library from my Lap Top to my Desk Top? If so how is the best way to do it?
assuming all your media files are in the default location, copy the entire iTunes folder (not just the iTunes music or media folder) to your desktop.
you can use target disk mode, an external HD, or your local network to copy it over.
since an iTunes folder is already present on the desktop, OS X will ask you if you want to replace it with the one you're moving. don't worry and click ok.

While having a perfectly running iTunes and all programs associated, I was notified of the iTunes 10.4 upgrade. After following typical directions, I have had nothing but trouble. First "iTunesHelper was not installed correctly. Please reinstall iTunes. E

While having a perfectly running iTunes and all programs associated, I was notified of the iTunes 10.4 upgrade. After following typical directions, I have had nothing but trouble. First “iTunesHelper was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 5)” occurred. Following directions found at https://discussions.apple.com/message/15087646#15087646, I now get the following “iTunes.exe - System Error The program can't start because AVFoundationCF.dll is still missing from your computer. Try reinstalling the program to fix this problem.”, Along with “iTunesHelper was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)” I am running Win 7 Ultimate 64 bit on HP TouchSmart tx2-1275dx. I was one week away from buying an iPad but not if this is what I have to deal with. Please help

I actually managed to resolve this on my own by downloading iTunes from the Apple website and reinstalling iTunes that way. Here's the link: http://www.apple.com/itunes/download/ That should fix your problem. Good luck!

Im having major problems syncing my iphone 4 to itunes, this problem started after upgrading to ios 5. I have upgraded my itunes, turned sync by wifi on and off but still nothing. Everytime I try to sync my iphone it just says sync cancelled. Please help!

Im having major problems syncing my iphone 4 to itunes, this problem started after upgrading to ios 5. I have upgraded my itunes, turned sync by wifi on and off but still nothing. Everytime I try to sync my iphone it just says sync cancelled. Please help.....

I'm having the same problem ! Each time the sync starts it suddenly stops and says finished syncing

After upgrading to Mavericks all my pdf's that were on Ibooks in Itunes library disapeared. It said they were moved to the new ibooks for mac app. but nothing is there. Can anyone help

After upgrading to Mavericks all my pdf's that were on Ibooks in Itunes library disapeared. It said they were moved to the new ibooks for mac app. but nothing is there. Can anyone help

Well where is your library located now if not in the iTunes folder? See the links below on what your iTunes folder should look like and put it back together:
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391
iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847

MLB.TV nothing but blur after Upgrade

Similar Messages

Maybe you are looking for