MLD limitations M2 and F2e Nexus linecards

Dear all,
According to Cisco's IPv6 MLD configuration guide, the following limitations and guidelines are applicable for Nexus M2 and F2e lincards.
http://www.cisco.com/en/US/docs/switches/datacenter/sw/nx-os/multicast/configuration/guide/b_multicast_chapter_0100.html
Optimised-Multicast-Flooding must be disabled.
Does anyone know whether these MLD limitations are also applicable for the recently manufactered/released F3 linecards?
Many thanks in advance!
Kind regards,
Wim

With current software, the only way for F2E to be in the same chassis with the M1/M2/F1 cards is for the F2E to be in a different vDC.  The only way to connect the F2E to get connected to different cards is to physically connect them either through copper or fibre.

Similar Messages

  • It appears from my limited research and attempts that symbolic link command in Terminal is broken in 10.8.2

    It appears from my limited research and attempts that symbolic link command in Terminal is broken in 10.8.2
    Can anyone confirm or deny my observation ?

    It appears from my limited research and attempts that symbolic link command in Terminal is broken in 10.8.2
    Can anyone confirm or deny my observation ?

  • My elderly mother hss EXTREMELY limited vision and is a technophobe. I am considering an iPhone with Siri.  Can I turn off everything else so she can use only the phone app and voice dialing and not accidentally open any other app and screw something

    My elderly mother has EXTREMELY limited vision and is a technophobe. I am considering an iPhone with Siri.  Can I turn off everything else so she can use only the phone app and voice dialing or Siri and not accidentally open any other app and screw something up.

    I'm asking, in all seriousness, why do you think your mother needs an iPhone? Honestly, if your mother is, as you described her, a technophobe, I would recommend against getting an iPhone or any other smartphone. I've spent a fair bit of time teaching older folks to use smartphones. If they are interested in learning, it's fine. If they have the phone because their kids or grandkids thought it was a good idea but they are afraid of the phone or not interested in its features, it doesn't go well at all.
    Many basic phones have voice dialing. Obviously, it doesn't do all the things Siri does but it may be much less intimidating for your mom. Also, basic phones have hardware keys. Even someone with limited vision can learn the keyboard on such a phone. From the sound of your first post, all she will be doing is making phone calls.
    Best of luck.

  • What is SAP Bank Analyser, SAP Limits Monitoring and SAP Client Hierarchy

    Hi Experts,
    Could you please breifly explain functionality of
    SAP Bank Analyser,
    SAP Limits Monitoring and
    SAP Client Hierarchy  in BI 7.0

    http://help.sap.com/saphelp_bankanalyzer50/helpdata/en/f9/cdc23b95c8cb6fe10000000a114084/content.htm
    http://www.sap.com/industries/banking/pdf/BWP_SB_Limit_Management_REV.pdf

  • I have photoshop 5.0 limited edition and can't load it onto my pc with window 7. advice please? than

    i have photoshop 5.0 limited edition and can't load it onto my pc with window 7. advice please? thanks

    It is not compatible with Windows 7.  Advice could include telling you to purchase the latest version.  The other option would be to buy an old computer that is capable of running it.

  • If i have limited talk and text what apps use my minutes

    if i have limited talk and text what apps use my minutes

    You'd have to check the app description.  We have no way of knowing what apps you have on your device.  And I doubt any of us her know all the apps and what they do.  However, I don't know of any apps that would use up your minutes or text limits.

  • Limited Logistics and Finance User details differentiation

    Hi All,
    The following detail has given at the time of requesting the License for one of my customer.
    Professional User -  4
    Limited CRM User - 1
    Limited Logistics - 4
    Limited Finance - 3
    I have downloaded the license from SAP Portal in which i have got 11 - Professional, 1- CRM Sales, and 1- CRM Service.
    How do we differentiate the Limited Logistics and Finance from the Professional Users?
    Kindly clarify the same.
    Regards,
    Vikram Reddy

    Hi Challa
    Due to backward compatibility, SAP is still issuing Professional licenses for the limited licenses at this time. This will be changed in the 8.8 release due end of this year/beginning of next year. It will only therefore affect your customer when the new license manager is installed with the new version. In the interim the limited licenses will function as full professional licenses and cannot be differentiated at this time.
    Kind regards
    Peter Juby

  • Valet Limited Warranty and Support

    Valet Limited Warranty and Support

    It appears you've been backed into a corner and I sympathize with your situation.
    The fact is, support for BlackBerry products is very good.  BlackBerry contracts the people who provide you with your cell service on a monthly basis.  They know best what plan you're on and what services your phone is using.  If anything goes wrong, they're there for you 24/7.
    Now to your situation.  You received the phone from a friend and therefore didn't purchase it outright from a carrier or even from BlackBerry.  This creates a difficult situation because as a rule, carriers only support devices purchased from them.
    My suggestion is to call Rogers back and ask to speak to someone higher up, such as a manager.  Carriers usually don't support phones that haven't been purchased from them but your phone wasn't purchased at all, it was a gift.  The fact that you're a monthly customer with Rogers should hold some weight with them.  As I mentioned, I would go right to a supervisor or manager because the tech answering the phone will just stick with the "you didn't purchase it from us, so sorry" script.
    Keep us up to date on your situation. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • SBH50 and LG Nexus 4

    Hi,
    I purchased the SBH50 in October 2013 and basically found it solid and working well ... until ...
    Google updated me to 4.4.2 at which time I started experiencing troubles.  Specifically:
    1. SBH50 app no longer runs in the Notifications Bar/Tab of Android and therefore no longer displays caller I.D., only the number on incoming calls.  This was working before the update.  Oddly, if I open Settings/Apps I can find the app "running" in background but it just  no longer runs in the drop down menu or Notifications Bar/Tab as before.
    2. It drops calls.  Never a problem before the update.  Right in the middle of a call it will just beep and disconnect me and then in a few seconds reconnect.  This might happen 2-3 times in a row.  Very frustrating. 
    3. People I am talking to report that it seems to be cutting out on them as well.  My sentences to them get chopped and therefore illegible.
    Since getting this I have been dissapointed at the lack of voice dial support that many other more basic devices have had before.
    On a positive note I have not noticed it cutting out or dropping when playing music.  That seems to work fine so far just as it always did.
    I would appreciate any input.  Thanks in advance.

    Same problem here! Music plays ok, phone calls drop, no extended functionality through the APPs on the SBH50.
    The only difference is, I got the SBH50 only two days ago and my Nexus 4 had already been on 4.2.2 so it actually never worked for me. 
    I'd very much appreciate a solution either from Google or Sony's end...Thanks!

  • VSM and Cisco nexus 1000v

    Hi,
    We are planning to install Cisco Nexus 1000v in our environment. Before we want to install we want to explore little bit about Cisco Nexus 1000v
    •  I know there is 2 elements for Cisco 1k, VEM and VSM. Does VSM is required? Can we configure VEM individually?
    •   How does Nexus 1k integrated with vCenter. Can we do all Nexus 1000v configuration from vCenter without going to VEM or VSM?
    •   In term of alarming and reporting, does we need to get SNMP trap and get from individual VEM or can be use VSM to do that. OR can we   get    Cisco Nexus 1000v alarming and reporting form VMware vCenter.
    •  Apart from using Nexus 1010 can what’s the recommended hosting location for VSM, (same Host as VEM, different VM, and different physical server)
    Foyez Ahammed

    Hi Foyez,
    Here is a brief on the Nexus1000v and I'll answer some of your questions in that:
    The Nexus1000v is a Virtual Distributed Switch (software based) from Cisco which integrated with the vSphere environment to provide uniform networking across your vmware environment for the host as well as the VMs. There are two components to the N1K infrastructure 1) VSM 2) VEM.
    VSM - Virtual supervisor module is the one which controls the entire N1K setup and is from where the configuration is done for the VEM modules, interfaces, security, monitoring etc. VSM is the one which interacts with the VC.
    VEM - Virtual ethernet module are simply the module or virtual linecards which provide the connectivity option or virtual ports for the VMs and other virtaul interfaces. Each ESX host today can only have one VEM. These VEMs recieve their configuration / programing from the VSM.
    If you are aware of any other switching products from Cisco like the Cat 6k switches, the n1k behaves the same way but in a software / virtual environment. Where the VSM are equal of a SUPs and the VEM are similar to the line cards. The control and the packet VLANs in the n1k provide the same kind of AIPC and Inband connectivity as the 6k backplane would for the communication between the modules and the SUP (VSM in this case).
    *The n1k configuration is done only from the VSM and is visible in the VC.However the port-profiles created from the VSM are pushed from the VSM to the VC and have to be assigned to the virtual / physical ports from the VC.
    *You can run the VSM either on the Nexus1010 as a Virtual service blade (VSB) or as a normal VM on any of the ESX/ESXi server. The VSM and the VEM on the same server are fully supported.
    You can refer the following deployment guide for some more details: http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9902/guide_c07-556626.html
    Hope this answers your queries!
    ./Abhinav

  • K7T Turbo-R Limited Edition and USB

    After doing whatever research I could in these forums, I really couldn't find solid answer so I'm posting my questions.
    I have recently ordered a new case for my K7T Turbo-R Limited Edition (it's the red one) which has additional USB connections in the front of the case.
    Am I going to be able to connect the board to the case so I can use those USB slots?

    Hi Gregthos,
    I remember there was something with these connections - I think they will only work with the bracket and for the PC2PC connection ...
    There is at least 1 thread on this in the forum ... here
    Hans

  • K7T Turbo Limited Ed. and problems :(

    Hallo
    I have MSI K7T Turbo Limited Edition mobo (on KT133A). Yesterday something strange happened. I was surfing the net and suddenly my PC rebooted. After reboot I saw that in BIOS test, BIOS didin't detect my hard drives connected to first controller. CD-ROM and CD-RW were properly detected on the second controller.
    I turn the PC off....waited about 30 seconds and turn it on. And everything was fine again. But in a short time it happened again. But now I heard something strange. I heard that both drives are stopping...slow down wnd stop. After a 1-2 sec. windows XP freezed and PC rebooted again :( And again there was no drives detected on first controller :(
    I checked:
    1. viruses - system is clean. I checked it with NAV2003 (within windows and dos - from bootable disc)
    2. I tried to plug those 2 drives (15 GB Caviar and 15 GB Fujitsu) to the second controler (first was empty).
    I asked some friends about it and one said that it could be power supply (maybe there is some instability or something).
    Someone else told me that it could be a battery on the mobo (I have has this mobo for 2 years).
    Or maybe it is a problem with motherboard? Maybe controller is damged....but...from the other hand when I restar the PC everythin works fine....some time :(
    System: AMD XP1700+ (not overclocked), mobo as I said above, Radeon 8500, CD-ROM and CD-RW (pluged to second controller), Caviar 15 GB and Fujitsu (pluggeg do first controller), Windows XP with SP1.
    I had no problems with that system befere.

    Hi
    I must check the type of that battery...but from the other hand if the battery was the problem it wouldn't keep all BIOS settings. Am I right? But it keeps.
    Power supply is 300W - it is a kind off no-name (I bouhgt it with case 3 months ago and there was no problems befere :( )
    I've already borrowed one - I'll check it later today (after work).

  • Tolerance Limits (DQ and PP)

    Hi experts,
    Do you guys know about tolerance limits?
    what the difference between telorance keys DQ and PP?
    Regards,
    Beto

    Got it..
    Case close

  • Unlimited Data with Limited Talk and Text

    I have to say that I'm disappointed in Verizon for not recognizing the people that do not talk and text a lot but do use their phone for data.  I pay a lot of money to Verizon mostly for services I don't use all that much.  I would like to see a plan that takes us other folks into consideration and have an unlimited data plan with some type of limited talk/text.  I hate texting although I do a small amount of it and I don't talk much on the phone because I talk all day long for my job and become a hermit after work.  I've been a loyal customer and would like some type of recognition of being in the minority group that is the opposite of most folks.  If Verizon would look at my usage, they'd see exactly what I'm talking about.

    I do understand why you might be upset that there is no unlimited data anymore, and I know that you are probably wondering why it is no longer offered, and I would be more than happy to explain it to you. As you know, things are not like they used to be and our world is very fast paced. With Technology increasing everyday, the standard of that technology is also increasing. With the standard of the things that use data increasing, that amount of data that those things use are also increasing. As you know, we live in a Technological World, and the amount of people that are using data grows tremendously each and every day. When you combine these things, the network can become congested. If you have ever driven in heavy traffic, you know that you get nowhere fast. Well the Cellular pathways are the same as rush hour traffic, combined with school letting out. In that situation, you wont go but a few inches an hour, and if everyone was able to get Unlimited Data, that is what would happen to cellular speeds. Other companies offer it because they do not have NEAR the amount of peoplet that Verizon has on their network, nor the speeds.

  • Question about limiting matches and the applicability of LimitFilter?

    We have a use-case were the GUI allows the users enter a string that we lookup against an index in the cache using a LikeFilter and by appending "%" to the string entered by the user (the index actually contains the first N characters converted to lowercase and the string entered by the user is converted to lower case and truncated to N positions before the lookup, we have additional logic to handle matching the truncated part of the search string etc but we can ignore this extra complexity for now).
    The problem is that if the user enter few (or in the worst case zero) characters the resulting search takes a very long time (since a large number of keys are collected and sent to the client) and the client is not interested (or able) to receive all the results at once.
    The LimitFilter seems useful for limiting the number of keys actually sent to the client but from what I read in other forum threads it seems like the nested filter is re-executed and the full result built on the server each time the client request a new page of say 100 keys. This sounds like it still would be time and memory consuming on the server if the underlying filter produce a HUGE number of results each time it is invoked!?
    Have I misunderstood the way the Limitfilter operates or is there some other solution you can recommend to the problem?
    Best Regards
    Magnus

    Thanks for the info!
    I do however have two specific cases in mind and would like to know more about what overhead calls to "nextPage" would result in:
    1. The LimitFilter wraps a AndFilter. The N first characters of a string atribute is indexed (ordered index) and LikeFilter is used with a "xxx%" substring as key together with a InFilter on a indexed integer attribute using a small (typically max 4 element) set of integers. The value range for the integer attribute is faily small (no more than like 10-15 values exists today) so this filter will not limit the search that much (even not sure an index makes much sense but that is how we do it today - how would the amount of re-calculations at nextPage be affected if I drop this index?).
    2. A single EqualsFilter on an indexed integer attribute (part of the composite key) using a KeyExtractor as argument.
    Ie if I for each of the cases wrap the filter in a Limitfilter (with a page size of N) how much calculations are performed the first time how much of the calculations would be repeated by Coherence each time i call nextPage?
    Best Regards
    Magnus

Maybe you are looking for