MM 335 "You want to change the profit center...'

Hi guys,
in a material master I have the field profit center blank and I want enter a value but the message MM 335 '"You want to change the profit center but material stock still exists"...I have implemented OSS notes for release 6.03 but the message continues to go out..the stock for the Plant in which I want enter Profit center does not exist, is it correct that this message goes out?In your opinion which is the correct way to update material master?I have tried to transfer all stock present in all Plants on which that material is opned with mov type 309 but the message go out again..It is a strange thing , I don' think taht the unique way is to chenge the nature of message from E to W..
thanks in advance for your attention
Bye

Stock may be there still under Plant Stock and  Storage Location stock, in previous period.
TO make it Zero do the following things
If previous period stocks exist, you can make a withdrawal posting as follows:
1. Post the same amount to current period stock (for example, using movement type 561) so that previous period stock and current period stock are identical.
2. Make a withdrawal posting in the previous period for the stock together with posting date (for example, using movement type 562).
Hope the steps will help to resolve the problem.

Similar Messages

  • How to change the Profit Center in Sales Order

    Hi Gurus,
    Previously they setted the profit center (YB999) in sales order, now i want to change the profit center and need to give the amount into this profit center 100500.
    So, could you guide me how to change the profit center in sales order.
    Thank you for your replies.....
    Thanks & Regards,
    Chandrababu.B
    Edited by: Chandrababu Naidu on May 25, 2011 12:44 PM

    Hi
    If this SO is processed partially - i.e. transactions happened - You cant change it
    You can use ABAP and change it in Debug mode, but not advisable... Better to short close the SO and open a new SO for Balance qty
    br, Ajay M
    Edited by: Ajay Maheshwari on May 25, 2011 5:10 PM

  • Reg:Change the Profit Center

    Dear Experts,
    I created PO for one of the material, later on i changed the Proft center for that particualr material, now i want to change the profit center for that particular PO...
    Is it possiable?
    Note: GR is not Posted for that particular PO
    Regards
    Srinu

    Hi...
    You can give new profit center in PO and can post to that PC.
    regards,
    neeraja

  • Change the profit center of the cost center.

    Hi Friends,
    I want to change the profit center of the one cost center but system is not allowing because the posting done against this cost center. i transfer the value of that cost center in other cost center then i tried but system dose not allow.
    following error is coming.
    Changing profit center from 101257 to 101271 is not permitted
    Message no. FAGL_ORG_UNITS011
    please provide the solution.
    Regards,
    MAhesh

    HI,
    system behaviour is explained in SAPNET note 1358080, there you find also how to change the message. Check the consequences carefully in test client...
    best regards, Christian

  • Are you sure you want to change the extension from... BLOCKS Finder Editing

    This is weird and is driving me nuts, but some Macs do not allow further Finder editing of file or folder names if I change their names (usually including numbers, dots and so on) in such a way that I receive the warning:
    Are you sure you want to change the extension from..?
    After I confirm that I want to change the name, the Finder does it but gets locked for editing (I can do other things) and does not allow any further file or folder editing until I force quit of Finder or reboot the Mac.
    I have found that if right after confirming that I want to change the name I select the file and hit return (which selects its name), no problem arises. But I must do it in one or two seconds, or else it will be too late.
    IN SUMMARY:
    1. Change file or folder name including numbers and dots at the end.
    2. Get the message "Are you sure you want to change the extension from..."
    3. Confirm that I want to change the name.
    4. FROM NOW ON, I CANNOT CHANGE THE NAME OF ANY FILE OR FOLDER UNTIL I FORCE FINDER QUIT. Unless of course I do the trick indicated above real quick!
    Any hint? Any way to know what is going on? This could be a bug of Mac OS X 10.4.x or earlier or a problem with a third party application. But how to know what is going on to prevent it? As said, some Macs show this issue, but not others.
    Note: some related issues on this section searching for:
    Finder Loses Keyboard Input
    or
    Sure change extension
    For instance:
    http://discussions.apple.com/thread.jspa?messageID=1974048
    http://discussions.apple.com/thread.jspa?messageID=1466505
    Hint: some file or folder name changes are more prone to cause the issue than others. For instance, renaming a folder (and confirming it) as:
    Testing.r00
    brings the bug 100% of the times.
    Any idea of what is going on? Thanks.

    The message is a warning that you are doing something that the OS thinks is going to possibly cause a problem. You are creating the situation and the OS is doing nothing other than what you are asking it to do.
    I don't know any exact answer why you can't access your files, but I do know that there are a few characters and things that will cause problems because they mimic names of invisible files. When you make a name that is close to being the same it can treat the file as the special one... meaning you can only access it via Terminal.
    Ones you cannot use at all: the colon (:), slash (/), single or double period as first characters. (taken from Finder Help with a naming files search) It is best to stay away from any special characters as a rule. Also avoid using a period and 3 character suffix unless it is one that you are purposefully assigning so the file belongs to an application.
    That said... even with the over 200 applications on my system I couldn't repeat your Testing.r00 problem. So, I don't know if it may be application related or not.

  • Using BADI for changing the Profit Center in FI Document during MIRO

    Hi,
    We have an requirement of changing the profit center in FI/CO Document while doing MIRO which is different than the one which is posted at the time MIGO.The system is not allowing us to do this and the field profit center during MIRO is not changeble mode and the business requirement is to change this through any SAP enhancements or program.
    How can I do this ?
    Is there is any standard BADI or User Exit is available for this.
    Pleease help me in this and will give valuable points.

    Hey,
    Use the BADI INVOICE_UPDATE and try with this. Otherwise you try to create Enhancement point to implement your code.
    Note: Inside BADI we can't change the runtime value. So, try to use enhancement point.
    Rewert back for any clarification.
    Regards,
    Saravanan M

  • Change the profit center in the material master

    dear All,
    we need to change the profit center but the system is not letting because the is stock.
    i was thinking if we issue this stock on any cost center, change the profit center and then cancel the issuing material document ...
    what do you think ,,,, would this effect the accounting badly ?? if so,, please recommend other ways

    tej yadav wrote:
    Hi, The only solution to change the "PROFIT CENTER"  for you will be to maintain message MM335 in OMT4 as a warning, then change the Profit center & again change it to error.
    Are you really thinking this is the right approach?
    ever thought about how the posting are made in the other modules then? We dont live on an MM island, so a solution  has to cover the requirements of the connected modules as well.
    if you had received stock to a material with profit center A, then value is posted to profit center A.
    if you change the profit center  in material master to B while you have stock, the value of earlier receipts will not move from profit center A to B, they stay at A.
    The next goods issue for this material is made against the profit center B.
    this results in having a postive value at profit center A (which will never go away) and having a negative value at profit center B (because you had never received to profit center B what you just issued)
    Because of this you should not change the message settings.
    Florian LINTNER wrote:
    Hi!
    >
    > post the goods issue in the prior period.
    > Change the profit center.
    > And post a new goods entry with the date of today..
    >
    > regards
    > flo
    you cannot issue anything in the prior period if everything is already issued in the current period.
    One should obtain the quantityof previous period in material master accounting view.
    Finally you have to have zero stock in current and previous period before changing profit center.
    How you approach this is based on the fact if the current period stock is bigger or smaller than the previous period stock.
    if current period stock is bigger, then issue previous period stock with previous peiod date, and issue remaining stock in current period.
    if current period stock is smaller than previous period stock, then you have to write on the delta in the current period, and subsequent issue the total stock in the previous period.
    seesen_rs wrote:
    Your approach is right. when we had this issue we solved through created dummy material and issue it to dummy material, change the profit center and receive it back..
    >
    > Both options dont affect the accounting.
    Goods issue to cost center or goods movement 309 to a dummy material will both affect accounting and create accounting documents.
    of course, if everything works well then you will get  accounting documents with opposite value after you have changed the profit center and you write on the quantity again.

  • Change the profit center in delivery wise

    Dear All ;
    In my case i use cross company code (C001 , K001) so i do PO in C001 and when i try to make a delivery in K001 i didn't get the profit center, the profit center field is Blank so i need to change the profit center in delivery.
    Please Help
    Mohamed Helmy
    +20 222 0 386

    Hello Mohamed,
    As I know all changes of the profit center should be done in the sales order only.
    This is because there would be no update of the sales order afterwards
    (the result would be: different profit center in a document chain)!
    Although the profit center could not be changed in the sales order, if the sales order has the follow documents already (due the same reason as above). But there is a modification note 580216 which provides a workaround. I hope this information helps you.
    Best regards,
    Lela

  • Change the profit center in delivery

    Dear All ;
    In my case i use cross company code (C001 , K001) so i do PO in C001 and when i try to make a delivery in K001 i didn't get the profit center, the profit center field is Blank so i need to change the profit center in delivery.
    Please Help
    Mohamed Helmy
    +20 222 0 386

    Hello Mohamed,
    As I know all changes of the profit center should be done in the sales order only.
    This is because there would be no update of the sales order afterwards
    (the result would be: different profit center in a document chain)!
    Although the profit center could not be changed in the sales order, if the sales order has the follow documents already (due the same reason as above). But there is a modification note 580216 which provides a workaround. I hope this information helps you.
    Best regards,
    Lela

  • Change the Profit Center in Sales Order line item's Account assignment tab

    Hi Gurus,
    I need to change the Profit Center at Sales order Line item in Account Assignment Tab. Currently  The Profit center is coming from Material Master for the Line Item's Material as default but I have to change / overwrite  that.
    Can any body provide me how can i achive that means
    Any User exits, substitution or any thing ?
    I tried MV45AFZZ but i am not able to find out the right place where I can change COBL-PRCTR.
    Sony

    Hi
    There is perform which moves the values to VBAP field.
    This PRCTR field is stored in VBAP (i.e., SO line item table)
    USEREXIT_MOVE_FIELD_TO_VBAP
    Hope it works.
    VVR

  • Changing the Profit Center while PO creation

    Hi All,
    I am trying to update the Profit Center(EKKN-PRCTR) while PO creation using the transactions ME21N and ME22N. I used ME_PROCESS_PO_CUST which is not even triggering and include ZXM06U22, ZXM06U43 which also are not working. Can you please guide me which EXIT or BADI can be used to achieve this requirement.
    Thanks in Advance.

    Hi
    Check the BADI  ME_PROCESS_PO_CUST with PROCESS_ACCOUNT AND POST methods. 
    Refere the link
    Re: BADI for Purchase  Order
    Regards
    Sanil Bhandari

  • Changing the profit center for Material impact on inventory turnover

    Dear All,
    Due to recent organization structure change, we have some up with new set of profit center in our organization.
    This means that old profit center as case in point in material master should be changed to new ones, after flushing the stock out. Probably, by moving stock to cost center with movement type 201 and then after the profit center change we reverse with movement type 202.
    We use standard SAP report MC.7 inventory turnover calculation. Based on this inventory turnover, we use this ratio to calculate the inventory obsolescence provisions.
    So, our issue is the above movement profit center change by moving it to cost center, does it impact the inventory turnover?
    Or alternatively, can use some other movement type which does not change the inventory turnover? So, that we are assured from our side, about no change on inventory turnover and subsequent the change to our inventory obsolescence provisions.
    Please help me here.
    Kind Regards,
    Prakash

    Hi Venkat,
    Thanks for the reply. How different this movement type 562 (intial stock upload) is different then 201 (cost center consumption)?
    I mean does it not update the info structure?
    Regards,
    Prakash

  • Changing the Profit Center on aa WBS after actual costs are posted

    We are changing the structure of Profit Centers; within this activity, we have to assign some WBS to a new PC: the system issues a warning because some costs are already posted, then allows the modification. After the modification, new postings are linked to the now Profit Center, ok. Now we have the need to change the old Profit Center assignment to the transactions already posted. Is there any report (something like RKEPCR00 for Cost Centers) allowing to change with a mass processing the balances from the old to the new PC?
    Thanks,
    Massimo

    Hi,
    you can try periodic allocation method of PCA. 4KE1 Tcode. Create distribution cycle. Set up the sender profit center(Old Profit Center) and receiving profit center(New Profit Center). Use variable proportions and receiving tracing factor on reciever as 100% as u intended to transfer whole amont from old to new.
    Regards
    Sudhakar Reddy

  • Are you sure you want to change the extension...

    Anyway to disable this dialog?
    I have found some info on a product called "Path Finder." I'd rather not use third party apps.
    I would be happy if I could tab over to the "use ext" button and select it. Well I can tab over but pressing enter enters the "Keep ext" button. I've tried +Enter, option, control, shift. Nothing will execute the "use…" button even though it is highlighted.

    Lardlad,
    After selecting the "Use ext" button, hit your *space bar*. Works for me...
    Good luck!
    Andrew99

  • Change of Profit Center

    Dear All
    My Client want to change the assignment of some profit centres (for which transactions have been posted) to Cost Centres.
    The system is not allowing to change the profit centres as data is already available in the profit center.Request to help me in this regard
    Thanks & Regards
    Subbu

    Hi Mr PAN,
    IAM GETTING THE FOLLOWING ERROR MESSAGE WHILE CHANGING THE PROFIT CENTER
    Changing profit center from 5000 to 4100 is not permitted
    Message no. FAGL_ORG_UNITS011
    Diagnosis
    You want to change the profit center from 5000 to 4100. However, this is not permitted because transaction data already exists for the account assignment object. Changing the profit center in this instance can lead to inconsistencies in FI.
    Example:
    There are costs on a cost center (WBS element) to which profit center A is assigned. If the profit center in the cost center master record were now changed to B and the costs then distributed to other cost centers, the currently assigned profit center - that is, profit center B - would be credited. Profit center A, however, would still have a debit posting.
    System Response
    The action is terminated.
    Procedure
    If you want the change in profit center to be possible, you can convert this error message into a warning message. You do this in the IMG activity Change Message Control (work area FAGL_ORG_UNITS, message number 011). In this case, however, you need to examine the possible effects that the change in profit center would have on the relevant balance sheet in FI.
    Regards
    Subbu

Maybe you are looking for