MM AFS document /Steps for SAP MM - AFS implementation

Dear Friends & Consultants,
Can you provide Information on SAP R/3 implementation for AFS Industry Sector....
Documentation for Implementation of SAP R/3 MM module for AFS industry
Pls kindly do the needful,
Regards,
Srinivas
Message was edited by:
sapsrin
Message was edited by:
sapsrin

Have you checked the best practices. See if this helps.
http://help.sap.com/bp_afsv1500/CP_AFS_DE/index.htm
Also you can get the some config help from:
http://help.sap.com/saphelp_afs50/helpdata/en/b2/53ae56cda511d2aca20000e829fbfe/frameset.htm

Similar Messages

Implementation Steps for SAP Business One..

Hello everyone,
Can I have any link where I can get the implementation process(step-by-step) for SAP B1 right from the beginning?
regards
Raj

Hi Raj,
you could start with the ['Best practise guide' |https://sapneth4.wdf.sap.corp/sapidb/011000358700001151332007E.pdf] & then check out the ['Accelerated Implementation webcast'|https://sapneth4.wdf.sap.corp/sapidb/011000358700000022142007E.wrf].
You will find a wealth of links & documents in the [Documentation Resource Centre |https://sapneth4.wdf.sap.corp/smb/sbo/documentation]on the SMP.
All the best,
Kerstin

What are the post installation steps for sap 4.7ee

what are the post installation steps for sap 4.7ee

Hi,
Post installation steps are as follows.
1.SICK to be run first to checkt the errors while installation.
2. Install SAP GUI
3. Set up the TMS. Configuration the domain controller through SE06 and then set up the transport system through TMS.
4. Change the default password of SP* and DDIC.
5. Set up the operations mode using RZ04 and SM63.
6. Apply patches through SPAM.
7 Schedule default background jobs through SM36.
8 Import default profiles through RZ10.
9. Schedule backup calender through DB13.
10. Create clients using SSC4
11. Install lisence
12. Schedule SGEN

Prerequisites for SAP NW BPM implementation

Hi All,
Can you please let me know the prerequisites for SAP NW BPM implementation?
Also,please let me know the phases in a SAP NW BPM implementation like requirement gathering and subsequent phases.
Thanks in advance

Hi,
You can start with this document Step by Step Guide to SAP NetWeaver Business Process Management - Webinar Replay, and this simple example http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/307336b8-098c-2d10-be9c-d41ae345f0ff?QuickLink=index&…
Regards.

Connection steps for SAP BW and R/3

Hi Every Body,
Can you please explain me detail about the connectivity between R/3 and BW.
General steps which am aware is as follws;-
SAP R/3 steps to be performed
1. Define Logical system---->(e.g ABC100)
2. Assign client to logical system -->(100)
3. Define RFC Destination.(Here I assume I have to give Destination user name and password should be the user which have SAP_ALL authorization) Am I right.
SAP BW Steps:-
4. Define Logical system---->(e.g ABC100)
5. Assign client to logical system -->(100)
6. Define RFC Destination.(Here I assume I have to give Destination user name and password should be the user which have SAP_ALL authorization) Am I right.
Then in BW Environment in RSA1->Source Systems->right click and choose Create
There are two options available for R/3 system one is Manual and one is Automatic.
For Manual creation we give RFC Destination should be BW system and Logical system should be R/3 and Source system name is xyz.
Is there any other steps am missing.What about the inbound and outbound Idoc Parameters.
I feel this will help while transferring data to BW.am I right.
Please clearly explain the steps for R/3 and BW connectivity.
Regards,
VJ

Hi,
For Manual creation we give RFC Destination should be BW system and Logical system should be R/3 and Source system name is xyz.
RFC Destination should be R/3 system. NOT BW system.
should i make connection with only R/3 200(Data Client) to BW
Yes you have to connect to 200 only. Not to 100.Other wise you will not get data from R/3 to BW.
What is the Use of Transport Button in RSA6.Post Processing data sources.
It will be used to create Trasnport requests on DS .
Suppose if i activate data source from Customizing client(100)and click on Transport button in RSA6 if there is connection with this client to BW. What is the Impact.
It will not give any impact on BW. Actually it ask you to create a Transport requset by Prompting the message box. After click on create button and entering the description, it will create a transport request.
Clearly explain me in detail what happen when i choose Transport Button in RSA6 for BC data sources.
It is must and should process. Because you will not activate(using of RSA5) the DS in quality R/3 system. So to use this DS in QA system, you will import the Transport request creatd in DEV r/3.
In your case, you will use client 100 for activating the DS and creating Transport reuests. And then these DS are automatically available in client 200, because DS are Client independent.
With rgds,
Anil Kumar Sharma .P

POST Installation steps for SAP XI 7.0 SP06

Hi Experts ,
We are trying to install XI 7.0 SP06.We are suppose to carry out post installation
steps but we are not able to locate a proper post installation guide for the same.
We have succesfully installed XI 3.0 earlier .However XI 7.0 post installation steps in the guide that we have "SAP NetWeaver 2004s SR1 ABAP+Java on Windows: Oracle" , are relatively less...
Nevertheless, we have carried out the following steps
5.21.1 Performing PI-Specific Steps for SLD Configuration
Local and Central System Landscape Directory (SLD)
Mapping Security Role to User
1. Log on to the Visual Administrator of the J2EE engine of the SLD host.
2. Choose Cluster® Server® Services® Security Provider.
3. In the Runtime tab, choose Policy Configurations and then the column Components, and select the component
sap.com/com.sap.lcr*sld.
4. Switch to the Security Roles tab to display the assigned roles.
5. Select role LcrInstanceWriterLD.
The user SLDAPIUSER already exists with its security role LcrInstanceWriterLD.
6. Switch to edit mode and add user PIAPPLUSER with the same role LcrInstanceWriterLD.
Note
For a central SLD, the user PIAPPLUSER must be created in the central SLD ABAP system first and be
assigned to ABAP role SAP_XI_APPL_SERV_USER. The password must be same as in the XI Exchange
Profile on the XI Integration Server.
Note
For information on the UME actions, see the Post-Installation Guide - SLD of SAP NetWeaver 2004s, section
Configuring SLD Security, at service.sap.com/sld® Media Library.
Maintaining SLD Connection Parameters (ABAP API)
1. Log on to the SAP XI Integration Server System as user DDIC and call transaction SLDAPICUST. The screen
Maintain SLD Access Data is displayed.
2. Choose Display <-> Change and proceed as follows:
a) Replace the existing SLDAPIUSER with PIAPPLUSER user.
Note
For a central SLD, make sure you use the user with security role LcrInstanceWriterLD.
b) Make sure your entry is marked as Primary.
Note
Only the entry marked as Primary is active.
c) Save your settings.
April 10, 2006 PUBLIC 97
Now we don't know wether the sld configuration is over or not ...or for that matter in RWB we see only J2se based adapter engine and not J2ee based adapter engine...
Kindly help

Hi..
Instaed doing this,please try out template based configuration which has been mentioned in the installation guide or else do as follows
1.Login into NWA (netweaver administrator)
as
http://<host.<domain>.<com>:<port>/nwa
2.Use J2ee_admin user id and password
3.go to deploy and change
4.select template based configuration for PI
5.execute the template
6.install it
you can find the list of other templates which are clear and easy to do the post installation step..i found it useful ..
Apart from these, as per sandro, you can check the data transfer in visual administrator or go the abap engine, transaction RZ70, press accept proposal button
then execute button , check the data supply without any error
Thanks
Gopal
(Avoid points if useful)

Post installation Steps for SAP XI

Hi,
I am doing post installation steps for SAP_XI, for the step "Generating roles for SAP_XI and SAP_SLD in transaction PFCG, when I enter Role: "SAP_XI*" then its not generating any roles it is giving message "No roles found in the selected area" Please suggest
Thanks,
Nishant

Create user in SAP XI and then assign them role
Create user using SU01 transaction. Enter the username and click on the first button (create).
Follow the process below
1. Address Tab
Enter the user details
2. Logon Data Tab
Enter the initial password. Make sure user type is Dialog (it is by default).
3. Roles Tab
SAP_XI_DEVELOPER
SAP_SLD_DEVELOPER
SAP_XI_MONITOR
(if the user is admin give the admin roles)
Before logging on to the Integration Builder, logon to ABAP stack (SAPGUI frontend on windows or java) at least once. Then logon to Int.Builder components.
regards
Dharamveer

Request for installation steps for SAP 4.7 Windows2003

I would request if someone could provide the installation steps or manual for SAP 4.7 on Windows 2003. My email id is [email protected]
I would appreciate if i could receive help on this forum.
Regards,
arshi

Hello arshi,
the installation guides for SAP products can be found on the SAP Service Marketpace http://service.sap.com/instguides.
If you cannot access this please post a thread in the correct forum (the SAP GUI forum is not suited for questions not related to SAP Frontend software).
Best regards,
Frank

Scope and Proposal preparation for SAP GRC AC Implementation.

Hi ,
I would like to know procedure how the RFP (Request for proposals) are prepared for SAP GRC AC Module implementation. and also how the scope and effort estimation are calculated.
are there any guidelines and checklist are available to be followed.
is there any generic approach followed during SAP GRC AC implementation for proposal as well as for effort estimation.
Pelase clarify my doubts
Regards,
RK

Hi,
Use RTA on SAP BASIS 7.00 System for any system other than ECC which has ABAP and Basis Level 7.00 with Kernel 7.00
I don't see any option for 7.20, may be it will be available later on.
We have SRM connected to GRC so I can cofirm, yes it is possible to connect SRM to GRC and work with SRM rulebook. RTA and Post-RTA activites and JCO and RAR connectors are a must to get it work properly. In fact all configurations are required as it is in ECC system.
No HR RTA is required ,as there is no HR module in SRM.
Regards,
Sabita

Easy Installation step-by-step for SAP ECC 6.0

Dear all:
I am starting to install SAP ECC 6.0 with Oracle 10g
is there any easy simple step by step guideline .
which CD is the first one I should used? is it kernel ,master data disk and which exe file to start.
Thanks in advance.

Hi,
Please follow the official installation documentation at http://service.sap.com/instguides -> Business Suite Apps -> SAP ERP.
The installation is performed by tool called SAPInst. This can be started from the Installation Master DVD. But ofcourse the Installation Master DVD would be specific to you Operating Syste/Database.
Description of other required installation media (Kernel, Export, RDBMS etc) is mentioned in the installation document.
Suggest you to go through it completely.
Regards,
Srikishan

Need Document/Steps for Cloning RAC 11g.

Hi,
I am looking for a document to clone an existing RAC 11g database.
I believe in the cloning process this will create a new RAC database...
Also the source database data has to be applied to the cloned rac db.
Environment 11g, AIX.
Advice needed.
Thanks in advance.

Hello Indigo,
The steps are necessary,
1) Create the password file
2) Create the spfile for the DESTINATION database (auxiliary database)
3) Create the necessary mount points or the folders for the database files
4) Execuute this command from the primary database.
DUPLICATE TARGET DATABASE TO <standby_name>
FOR STANDBY
FROM ACTIVE DATABASE
SPFILE
PARAMETER_VALUE_CONVERT '<string>', '<string>'
SET DB_FILE_NAME_CONVERT '<string>', '<string>'
SET LOG_FILE_NAME_CONVERT '<string>', '<string>'
SET SGA_MAX_SIZE 1000M
SET SGA_TARGET 850M;
Please see the *11g : Active Database Duplication ID 568034.1*
Best Regards,
Rodrigo Mufalani
http://www.mrdba.com.br/mufalani

Need installation steps for SAP - 4.6c and 4.7

hi guys i am new to sap so any one can send me a guide which can tell step by step installation procuder of sap 4.6c and 4.7 on my system which runs on windows xp professional my email is :[email protected] or [email protected] it would be very greatful for me if any one send the same thank u

Hi,
<a href="https://websmp209.sap-ag.de/form/sapnet?_FRAME=OBJECT&_HIER_KEY=501100035870000015092&_HIER_KEY=601100035870000179416&_HIER_KEY=601100035870000179439&_HIER_KEY=701100035871000095510&_SCENARIO=01100035870000000202&#HOME">Check Here</a> and <a href="https://websmp209.sap-ag.de/form/sapnet?_FRAME=OBJECT&_HIER_KEY=501100035870000015092&_HIER_KEY=601100035870000179416&_HIER_KEY=601100035870000179440&_HIER_KEY=701100035871000389458&_SCENARIO=01100035870000000202&#HOME">here</a>
Kind regards
Umesh K

Need Document/steps for configuring Samba,apache,tomcat

Hi all,
I need steps/document for configuring samba,tomcat,apache in solaris 10 x86.please guide.please send to [email protected]

docs.sun.com should have a lot od the Solaris specific documentation- I don't know how much it would have have specifically on Samba, Apache and Tomcat etc.
Documentation on configuring Samba and Apache (and probably Tomcat) are available on the respective websites. You may want to Read The existing technical Manuals then post questions on specific issues that are not covered by the exisitng documentaion.

Restoration Steps for SAP

Hi Gurus ,
I have to do a restoration drill for our R/3 system .
Please let me know the following
1) Pre-requisite
2.) Steps of restoration
3.) Steps of testing the restore data.
I have SAP 470 with oracle 9.2.0.7 . The database size will be approx . 900GB
We use backint(Legato) to take the backup .
Regards
Anthony

Hi,
All that information can be found on the documentation:
<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/74/204482e8aa3b4a888d0435afd87a71/frameset.htm">Procedures for Restore and Recovery with BR*Tools</a>

Adobe Document Services for SAP NetWeaver 7.1

Hi there,
we're planning to install a NetWeaver 7.1 PI system. One of the reqirements is the availability of Adobe Document Services. Does anybody know, if the ADS are already available for NetWeaver 7.1?
Thanks in advance,
Matthias

Hello Samrat,
thank you for your quick reply. You really helped me out.
Unfortunately, I haven't marked this thread as a question. So I cannot give you any points. Is there any possibility to change this thread into a question?
Cheers,
Matthias

MM AFS document /Steps for SAP MM - AFS implementation

Similar Messages

Maybe you are looking for