MM BAdI's

Please help me with a list of BAdI's in MM so that I can try out a real time example. I should be able to trigger the BAdI from a transaction.

Anand,
Its best for your to figure which one you want to try out as there are plenty out there.
Go To SE18, press F4, when the search screen comes up, PRESS on the SAP Applications and then you can go to Pruchasing NODE, where you will find a list of BADI's.
The easier ones in my opinion to start with would be
ME_PROCESS_PO
ME_PROCESS_PO_CUST
ME_PROCESS_REQ
ME_PROCESS_REQ_CUST
ME_PURCHDOC_POSTED
Regards,
Ravi
Note : Please mark the helpful answers

Similar Messages

BADI for changing fields during Creation of BP in CRM

Hello to everyone,
I need to find a BADI (or other way) to default several fields during BP creation in CRM (4.0 SR1 SP9). The fields I will like to set are TAX TYPE, TAX NUMBER, TAX CATEGORY, etc.. I have found the BADI BUPA_TAX_UPDATE but i dont see any suitable parameters (structures) to changes these fields. Please advice and thanks in advance.

Hi
If you use function BUPA_NUMBERS_GET then your BP number will already be buffered and you can avoid a DB read. It may also be that the BP is not in the DB yet anyway.
You can only pass one GUID in at a time - loop through IT_CHANGED_INSTANCES into a variable of type BU_PARTNER_GUID and pass that into the function as input parameter IV_PARTNER_GUID.
Cheers
Dom

Implementing BADI MD_ADD_COL_EZPS for MD04 custom column

Hi there,
I'm using BADI MD_ADD_COL_EZPS to display 3 new buttons and three new columns in MD04.
For each line item that is displayed, the custom column is filled, after the button is hit -This works fine.
My Question is:
Is there any way to limit the value that is filled into the new column so that it only appears on the FIRST line item/row?
(At the moment it is repeated all the way down the page - the new value is a material characteristic, so doesn't change, will always be the same for each line)
I've looked at all the available structures/tables in the FILL_ADD_COLUMNS method of the BADI, and none seem suitable
to determine the "first" row. (ie. something like the way SY-TABIX or SY-INDEX might be used)
Any help appreciated.
Thanks,
David.

Hi Shubhendu,
in the method 'ACTIVATE_ADD_COLUMNS', you can set the flag EZ1_MODE to '1' to make the first column visible always. (it's been a while, but I think setting it to '2' makes it visible when the button is pressed.)
Same applies to EZ2_MODE for second column, EZ3_MODE for third.
look at the flags/parameters in this method, and also in FILL_ADD_COLUMNS, to fill the data.
here you need to fill structure EMDEZX_USEX1 (for column 1) etc.
The code is hit for each record displayed in MD04
Hopefully this helps you.
Regards,
David

Help Needed Badly | BlackBerry INC000025111306 | BlackBerry PlayBook - Tablet button does not work, almost stuck, copper under screen, seventh repair

I was really Humilitated my RIM on this Ticket whcih i rasied.
1) I bought a new tablet in last november in 2 months i had a Charger issue
2) They said this charger issue we cannot replace with new tablet and gave me a refurbished Tablet to me .
3) Which also had same charging issue and they exchanged 2 more tablets and the last tablet which was given to me by RIM have a safety concern
- 1 Small mesh of wire is poping out from the Tablet
- Power Button is very hard and its not that easy to press,
So i raised the above ticket and was esclated internally with RMA as well and i got an update from the esclation agents that we will reply back in 2 Days i waited almost 3 weeks and called 2 times in this 3 weeks for an Update asking for a new tablet so that atleast once in all i can jeep a good 1 Tablet.
But they never bothered to call me and today i called them again and RIM gave me a call back mentioning we cannot give a new tablet we can again check this tablet repair it and give it back , If we cannot repir then give a replacement new/Old tablet,
I was wondering how can a tablet from RIM can go out without such safety concern ? How a mesh of wire can comeout of tablet so what safety norms RIM is follwoing for customer.
AM i not humilitated? since after taking all these struggle tto get a good tablet i have been considered as bad.
What RIM have to say for this, I am planing to take this to Legal department to follow how i can get a justice for this.

I would have deleted this but can't find a delete?
At any rate. got the Blackberry going again but it reset it and lost all the info, pictures and so forth.. oh well. at least it is still working.
Thanks.

Error message in a BADI getting displayed in a popup instead of status bar

Hello All,
I have implemented a BADI in ECC6 to prevent the change of formula in ERP from transaction O3I8.
The BADI gets called on clicking 'Save' from transaction o3I8.
Within the BADI i am giving an error message using the following command:
Message e000(ZABC) .
However , the message gets displayed in a pop up instead of the status bar .
The same is for information and warning messages.
Any suggestions on how to display them in the status bar ?
TIA
Regards,
Vartika

Hi Brad,
The checkbox to display messages in pop-up is already switched off.
Still themessages are getting displayed in pop-up.
Regards,
Vartika

Error message from a BAD PDF

I am using Adobe Reader to render PDF documents as a part of a process and then convert it into TIFF. Some of the documents that come in are corrupt PDF documents and cannot render itself in the reader and hence cannot be converted. This is the error that the reader throws:
ADobe reader could not open "test.PDF" because it is either not a supported file type or because the file has been damaged(for example, it was sent as an email attachment and wasn't correctly decoded)
Now, the process is automated with no human intervention. with the advent of this error message, since there is a modal dialog box waiting for a response from the user, the process is interrupted and needs human intervention.
My question is simply this. Is there an API i could use where i can figure out beforehand if the PDF is bad so i can reject such files early on? research shows that using the adobe forms server which has the PDF utility services, there is a query "Is a PDF document" that is available. I do not want to use a server product.
Is there any other ADOBE product that exposes something similar?

I guess i forgot to add that piece of information. WE do not create the PDFs. We receive PDFs from external sources over which we have absolutely no control and that explains why we get such corrupt documents in the first place. I was just wondering if there was a simple API event/method/means attached to any ADOBE product which is compatible with .net that tells me if the PDF is corrupt UPFRONT.

Error while transporting infospoke with BADI in BW7.0

Hi:
We have an infospoke with Transformation ( ie with BADI) in BI7.0.
While transporting to Quality box it gives error.
"Transfer structure /BIC/CZZTXXXXX3 could not be generated
Error when activating InfoSpoke ZTXXXXX3.
Message no. RSOH010 "
Could you please help in rectifying the error.
PS: we tried transporting BADI first and then the infosoke but still its failing.
Regards!
Saniya

Hi
Check the forum link below
Transport Problems with Spokes that have BADIs
Thanks

IPod can no longer sync or charge, bad pin connectors?

I've got an iPod touch thats a year old now that suddenly no longer will charge/sync to anything. I'm thinking maybe the pins are bad?
I've had difficulty inserting chargers into it since I got it, I've been careful to not handle it too roughly but it does take a strong push to get the charger in there. Of all the ipods I've had (and i had the first gen iPod touch before this too) over the years, never had that problem.
Before I get a bunch of "just reset it" kinds of replies, it is functioning properly other then that. Last night I did have it hooked up and synced to my Mac so it fully charged, but just now I went to connect it and now it refuses to connect at all. I've tried 2 cords, and with the same cords I plugged my iPhone in as well and it all worked fine, so it's definitely not my other hardware. iPod software is also up to date as well.
I haven't had a real issue of it not syncing with my computer before today, but in the past month it's had issues staying properly synced to my car radio (play it through USB). It would sometimes drop off or glitch up and not want to work correctly, though in the past week it started working more normally again.
I listen to my ipod as much as humanly possibly, so I'm wondering if this something I can take to the Apple Store and see if its fixable or replaceable. I've been looking for a great excuse to get the new red ipod touch but I've been unemployed since August.. Of course it has to break before I get a new job
Has anyone else had the issue of having difficulty getting the sync cords into their ipod touches/problems where the pins just die?
EDIT: Nevermind. My imac suddenly wont sync my iphone either but I plugged the ipod into the iphone charger and it synced immediately. It's something on my computer's end.
Message was edited by: Arei

*all the songs are there, but there are shown in light grey and not able to be high lighted.*
*I'm also not able to play from my ipod list, only from my itunes??*
Grey text when you look at the content and a lock symbol at the bottom of the screen just indicates that the iPod is set to sync automatically with iTunes. If you want to play the iPod songs through iTunes, delete songs from the iPod, drag songs from iTunes, add playlists to the iPod etc. you need to change the update setting to "manually manage songs and videos" as per the link above. The text will change from grey to black and everything will be directly accessible through iTunes
*I have seen a friend plug his ipod into some one elses computer and the same thing happened, it showed all the content but he was not able to access it, or modify it.*
Again that's most likely because the iPod was set to auto-sync with his home library. If you want to connect and use an iPod on more than one computer or with more than one library you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply. The content of iTunes and the iPod are not syncronised in this mode so the two can be different. You can directly access the content of the iPod and play it through iTunes and you can drag and drop whatever you want to the iPod from either library:
Using iPod with Multiple computers
*Before I backed up my itunes libary from my external hard drive, and itunes was empty, it would not allow itunes to be copyied from my ipod?*
iTunes will only give you the option to copy your iTunes Store purchases directly from an iPod to the computer, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
For everything else (music from CDs, other downloads etc) there are third party utilities that you can use to retrieve the music files and playlists from your iPod.

IPod Touch 5.1.1 no longer sync'ing w/ iTunes 11.1.3(8). . . .Bad Battery ???

Three day ago my iPod began acting up in a major way. The battery charging symbol within the battery indicator is no longer showing the iPod being charged when plug in to my MacBook Pro 5.1 via one of my two USB ports. A new Apple iPod cable was purchased thinking it was a bad wire or pin not making the proper contact with this device. The same conditions are happening with this new cable. I have several other peripheral devices and those devices are working and are connecting to my MBP's USB port without any issues. I have noticed for the past six months my iPod Touch 3rd Gen has been showing signs in needing longer charging times and seems to drain quicker than it used too. The iPod for the past two nights have been charging for more than eight-hours each night and is sporadic as if it deciding "I'm I fully or 30% charged?" Although subtle, It seems to jump within the sliding battery scale when the device is powered off for a while. Sometime showing 80% charged when used for a few hours to 30% charged when used for ten minutes. My iPod is now over three-years old and I think it is time for a new battery!
But, in all honesty, not sync'ing with iTunes is it more than just have a new battery professionally installed? Or are there other electronical problems/components going bad with these devices? What else can be wrong other than a new battery or will a new battery fix all what is mentioned above? Please be very honest and technical if needed, Thanks!

Apple will exchange your iPod for a refurbished one with a new battery for $79. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the bttery for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the battery yourself if you are up to it. You can purchase a replacement battery for about $10
iPod Touch Repair – iFixit

Reg. Exit/BADI for changing item data of PO in ME22N

Hi all,
My requirement is to update the field LABNR (Order Ack.) of few specific line items of a PO, in the Transaction ME22N, using Exit/BADI.
I have tried the BADI ME_PROCESS_PO_CUST. But the PROCESS_ITEM method of this BADI processes only the line item which has been changed/inserted in ME22N transaction. But my requirement is to update line items irrespective of whether that line item was "changed/not changed" during the process in ME22N screen.
Could you please suggest me some suitable Exit/BADI for this requirement.
Regards,
Anbarasan K

Thanks Martin.
Problem solved by implementing the method Process_Header.
1. Get the items from Header                              - im_header->get_items
2. Loop the item list and get the line item record   - re_item-item->get_data
3. <- Logic to Update the line item - >.
4. Update the line item                                       - re_item-item->set_data
Thank you very much.. Martin.
Regards,
Anbarasan K

User Exit/ Badi for Changing Quant parameters during TO Creation

Hi Gurus,
Could you please guide me to advice the User Exit/Badi which can be used for changing Quant Data during TO Creation.
User Requirement: Using "Recepient Field" in MIGO as a Key Value for FIFO in WM during goods issue. Receipient is copied into TR and TO (Standard SAP Functionality). For the purpose of Stock Removal based on Receipient Value, we need to copy this value into Quant Data field named Certificate Number ("LQUA-ZEUGN").
I will highly appreciate reply from Gurus.
Regards,
Gupta M

Hi manish,
Use the Exit MWMTO001 for this purpose and modify the table accordingly. This will solve your problem.
Thanks,
Shibashis

FM Call in BADI during replication of BP from R/3 to CRM causes problem

Hello all;
I am trying to change the BPKIND of the partner in CRM which is created in R/3 with the PARTNER_UPDATE BADI. But the FM called in the BADI causes the BP hang in SMW01 with intermediate state. May you please advice me somthing about this?
METHOD if_ex_partner_update~change_before_update.
DATA: lt_but000_old           TYPE STANDARD TABLE OF but000,
         lt_but000_new           TYPE STANDARD TABLE OF but000,
         ls_but000_new           TYPE LINE OF bup_but000_t,
         lv_objnr                TYPE crmt_object_guid.
CHECK sy-uname = 'ERP_RFC'.
CALL FUNCTION 'BUPA_GENERAL_CALLBACK'
    TABLES
      et_but000_old = lt_but000_old
      et_but000_new = lt_but000_new
    EXCEPTIONS
      OTHERS        = 0.
READ TABLE lt_but000_new INTO ls_but000_new INDEX 1.
ls_but000_new-bpkind = '0001'.
REFRESH lt_but000_new.
APPEND ls_but000_new TO lt_but000_new.
INSERT but000 FROM TABLE lt_but000_new.
* CALL FUNCTION 'ZBBP_BUP_UPDATE'
**    TABLES
**      t_but000 = partner_attrib.
ENDMETHOD.

Kindly check the partner function whether that partner function of customer in ECC, is defined in CRM. If it is not defined then it will not copy to IBase while data transfer.
Reward points if helpful.

Badi in standard tranction BP in CRM module

Hi,
i have to impliment badi in tranction BP, for field postal code and city i have to valdidate this 2 fields can u help me to know which badi i have to use and in which
interface i have to use this,
thanks,
Tanveer

hi sonali
this is the normal problem faced with the BADI which u r using,yeah it will definitelty give u solution but some ifs and buts are there
just refer the note 663905
also try using BAdi COM_PARTNER_BADI
but i should tell you that
COM_PARTNER_BADI is for business transactions, not for BP creates/changes. BUPA_FURTHER_CHECKS is usable for customer checks and it provides all of the customer information in the BADI interface, but it's only called by the BP BAPIs, not by the BP transaction.
For BP updates at create/change save time, the BUPA_UPDATE BADIs need to be used. The interface only provides the GUID of the not yet created BP or the GUID of the changed BP, not a bunch of parameters that you can change before save. However, you can call the BUPA_CALLBACK series of function modules to get the info you need about the BP, and use a field symbol to directly access the data in the memory stack i.e., (SAPLBUD0)MEM_BUT000[] and change the values. I am using this technique to add an authorization group to certain BP type at create save time.
best regards
ashish

Custom exit or badi for changing the user fields in operation of process order

Hi all
    I want to find a exit or badi to set default value to the user fields in operation of process order when COR1.
    I have tried exit 'PPCO0001', but this exit is call after commit work, so I can not change any thing
    I also tried to use badi 'workorder_update', 'before_update', but all parameters in this BADI are importing, can't be changed, I've tried to change it and then program dump.
    Do you have any solution for this question?
Thanks

Do a Implicit Enhancement at the PBO of this subscreen.

BADI/user exit for transcation code "BP" in CRM

Hi Experts,
Is there a BADI / user exit that is triggered after successful saving/updating of Business Partner using transaction code "BP"?
We want to send general infos such as partner number, Name, Birth date, etc. about the business partner being created/updated using IDoc.
We are using CRM WinClient 4.0.
If you know the steps on how this requirement will be done, kindly post them.
Thank you very much.

I don't have any CRM system at hand, but I'm sure there are some BAdI's for this. Look in SE18 for BP or BUS, and i'm sure you will find something.
One suggestion though: Before going for the BadI, try and see if CRM also uses change pointers for sending Idoc's . This case you wont need any user exits / badis, an probably no programming at all.
Transaction
BD50: Activate Change Ptrs for Mess. Type
BD61: Activate Change Pointers - Generally
and use report RBDMIDOC for triggering IDoc.

BADI/EXIT/Enhancement spot in during creation of PO to edit Vendor partner

Hello,
I am looking for BADI/EXIT/Enh. spot to edit the vendor partner during creation of a PO.
Due to some business requirement we maintained multiple vendor partner( for same role like goods supplier) in the vendor master and for such cases during creation of PO it throws a pop-up to choose one of the partners. However, in some cases, I have to select a particular vendor partner based on some other field value, and suppress the pop-up. So to choose the right vendor partner I need a suitable location where I can put my program logic.
Looking forward to your replies...
Thanks in advance.
Best Regards,
Amarjit Singh

By now I am unable to test this BADI to see which data is retrieved and the moment that this happens. But the popup that you mentioned is a Z routine ?? If yes couldn't you put your logic there?
Regards,
Felipe

MM BAdI's

Similar Messages

Maybe you are looking for