MM:CIN

Hi Gurus,
I configured every settings for CIN in ECC 6.0,
Now while creating Material 'Excise data is not coming in Foreign Trade Import tab' infact I maintained same in J1ID............now I created PO ..........tax procedure is taxinn........all conditions are reflecting in PO but at the time GR Excise data Tab is not coming
this is same for vendor master creation
Plz tell me what to do in above case?

Hi,
Even though this functionality is available in enterprise version, a small configuration step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
1. SPRO > Logistics General > Material Master > Configuring the Material Master > Define Structure of Data Screens for Each Screen Sequence (OMT3B)
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is "Foreign Trade: Import Data". Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 - 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade - Import, Excise related subscreen appears.
And To get Excise tab during MIGO;
Go to SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Incoming Excise Invoices > Specify Which Movement Types Involve Excise Invoices > Here specify movement type "101" for RG23A Register.

Similar Messages

Error Reading Header File When Creating a CIN

Hello everyone. I am a college student new to LabView and Im using the
software to create a real time data acquisition system for EMG signal
analysis for a research project. However, Im having difficulty building
a CIN for my C code. I am using Microsoft Visual Studio.NET 2003 and
running LabView 7.1 on Windows XP. I am using the "Using External Code
in LabView" (April 2003 Edition) manual and I am attempting to do the
steps located in section 3-15 under Visual C++ IDE. However, I keep
getting fatal error C1083: Cannot open include file: 'extcode.h': No
such file or dir. I have followed all of the directions in the manual
and even explicitly tried adding extcode.h to my project but I
still get this error. My version of Visual Studio is different then the
one described so I was wondering if there is something different that I
have to do in this process. Any help would be greatly appreciated.
Thanks for your time.
Pat

Is there a particular reason you're not using a Call Library Function Node to call a DLL instead of using a CIN? Calling DLLs from Call Library Function Node are usually a much more user-friendly process, which I would recommend, unless you need to take advantage of the extra features listed on page 1-4 of Using External Code in LabVIEW.
Jarrod S.
National Instruments

How do I use the WriteToMemoryXX functions in a CIN?

I'm getting a linker error "unresolved external reference _WriteToMemory16" when I compile the C code that contains the calls to the WriteToMemory16 function. I've installed the accesshw files and am including the accesshw.h file in my C-code CIN. It would seem that I need to compile-in the code for the WriteToMemory function, which I assume resides in accesshw.c.
My application calls for some direct hardware i/o that falls in the "too messy to do in a block diagram" catagory. I'm using Labview 5.1.1 and talking to a Keithley Metrabyte PIO-96 card.
Thanks very much for any assistance.

Ben,
Thank you for the response. I looked at the examples you mentioned, but unfortunately I'm still unsure what to do. As mentioned, I downloaded the accesshw.zip file and installed the files in order for me to use InPort and OutPort VIs in my program on an NT box, which I'm doing and is working fine. Also, I downloaded the example, "PCI-DIO using AccessHW_DLL.c". This C file contains calls just like the ones I want to use (calls to WriteToMemoryXX) in my CIN C code to basically do the same operations as are done by the InPort and OutPort VIs. Is there a makefile available for that C file? Maybe if I knew how to build that file into a CIN, it would be the same process for me to build my file into a CIN. There is an include file in the "PCI-DIO using AccessH
W_DLL.c" file that I don't have (ansi_c.h), but I don't get a compiler error when not including this file in my C file so
I assume I don't need it. I've got the accesshw.dll file in the same directory as my .c file, as instructed to do on the accesshw.zip download page.
I'm developing the CIN using MSVC++ 4.0 if that helps.
Thanks very much,
Jeff

MM period opening/closing in CIN

Dear All,
After go live the users are entering the backlog date of the pervious months.
the data of August is still not complete so the periods are not closed and they want to making entries in Sept.
if we allow back period posting and close the august month and open the sept month, what will be the issues-
especially in CIN.
the sales activities are still pending.
the client is forcing for this. can anybody guide on this issue or have sap documentation on this can forward me at;
[email protected]
thanking you in advance
regards
ramprasad

thank you very much vikas,
any impact on utilisation, excise registers enteries and internal serial number in register
what i see is say somebody is posting excise invoice for the month of august and system has taken the number as 5. say afterwards somebody post for the month of sept. then it will get internal excise number as 6.
so the sequence of excise invoices captured will not remian as per month.
if you can visualise anything more ,for advice will be of great help.
regards

Reqd. T-code in which list of customers display with CIN Details

Dear All,
Is there any t-code in which the List of Customers with cin details Display?Like the MKVZ,
this is the t-code for List of Vendors Display.
Thanks,
Sumit.

Dear Sir,
I have found another t-code VCUST for customer detail but in this CIN DETAILS are not there.
so pls. suggest something...
Thanks,
Sumit.

Batch Selection config. in Excise Invoice Creation (J1IJ) at Depot in CIN

Hi,
In the business scenario that I have to map in SAP system stock transfer occurs from Plant to Depot. Then the batch is split at the Depot and minor changes are made to characteristic. These individual small batches and then sold to the end customer from depot.
Problem: If the batch number is kept the same at depot as the incoming batch number, system is able to find the incoming invoice in J1IJ. If the batch number is changed (to mark individual characteristic) then the system in not able to idetify the incoming batch.
Please help...
In SAP help link http://help.sap.com/erp2005_ehp_02/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm I could find mention that "You can also automate this procedure, using the batch selection program (J_1IJCHK), by making the appropriate Customizing settings in the Country Version India (CIN) Implementation Guide (IMG)." Can anyone help by elobarinting what specific configuration is to be made for batch selection?
Thanks
Rajat

Hi,
SAP has released a SAP note 1001446 which can be implemented for your requirement. There is an user exit J_1I7_USEREXIT_BATCH_CHK_FLAG which has the parameter NO_BATCH_CHK_FLAG. If you pass the value ' X' to the parameter NO_BATCH_CHK_FLAG then the batches will not be checked during J1ij. you can implement this user exit through SE37.
Regards,
Murali

CIN - BED, AED & SED for the excise item is ZERO

DEAR ALL,
I am testing the CIN scanario with tax procedure TAXINJ.
While making GRN at excise invoice tab message is coming " BED, AED and SED for the excise item is zero" adn no any values for BED, AED and SED are flowing,
Value for BED is maintained in J1ID for the chapter ID. Also Tax code is created with JMO1 - IN: A/P BED deductible and value mainatained is 14 %.
PLease confirm me where I amd doing wrong ? Also please tell in TAXINJ on what paramaters the excise flows and shows the values while GRN OR whil posting a excise invoice ?
Regards,
Rakesh

Dear ALL,
Below are the steps / settings I have done,
01. Copied TAXINJ to create tax procedure say ZAXINJ and assigned to country IN.
     - Please confirm what needs to be AltCty & AltCBV for JMO1, JMOD, JMOP ?
02. Excise defaults maintained as per TAXINJ for ZAXINJ.
03. Acces sequenece maintained for JMO1, JMOP, JMOD is MWST - Tax code.
04. Then created Tax code say T1 - and % maintained as below
       JMO1 - 100 %
       JMOP - 100 %\
05. J1ID - maintained for vendor, plant, material etc.
05. Excise rate maintained in J1ID for chapter ID as 14 %.
06. Chapter ID maintained in material master.
07. PO created for the material with tax code T1 for the said vendor.
Still while GRN message comes "BED, AED & SED for the excise item is ZERO" and BED is not getting populated for BED.
Please confirm where I went.
Waiting eagerly for the valuabale inputs..
Regards,
Rakesh

CIN process to enter Excise Invoice for Return Delivery

Folks
I would like to know How to process excise invoice for return delivery. We have return sales order, return delivery created and product is received into inventory Customer return Blocked stock (movement 657).
Where and How can i enter Excise invoice for this return (Credit Memo)?
I tried J1IH transaction--> Other Adjustments
I am getting following error.
GL account has not been assigned for RG23ASED in customization
Message no. 8I447
Diagnosis
GL account has not been assigned for the excise a/c in customization
Procedure
Assign GL a/c for the excise a/c in CIN customization under : Accounting -> Assign GL accounts to excise groups and transaction types"
Please help

J1IIN is intended only for outgoing sales and not for returns.
For updation of excise related sales returns, run J1IH and do the following:-
Customer Credit
Choose the Additional excise input the original excise invoice reference, document year, company code, plant and excise group and execute. There input manually what value you need to give credit and save.
Cenvat Debit
Choose Other Adjustment and here also, maintain the datas whatever you input as above and save.
G. Lakshmipathi

Central Excise and WHT Settings in CIN Version for 4.6C

hi sap gurus,
i need urgent support from your end regarding Central Excise and WHT Settings in CIN Version for 4.6C. I am new to CIN Version, and now i deputed to the same.
can any body give the configuration of the Central Excise and WHT Settings in CIN Version for 4.6C.
kindly revert back asap.
thanks and regards,
raghav

Hi
Go to transaction code J1iln you get all the details on CIN or you can go to logistics general > tax on Goods Movement in SPRO
Anand

Cin-no enough balance for utilization---excixe invoice

hi gurus,
when i am updating excise registers using t.code J1I5
i am getting the following error
*Not Enough Balance for utilisation*
Message no. 8I578
Diagnosis
The balance in the Account is not enough to carry out the current transaction.
Procedure
You need to increase the balance by either taking credit or depositing into PLA.
kindly help me
how to update the registers?
thanks and regards
munichandra babu
sloution1
Are you sure you are getting this when you do J1I5? You can deposit some amount to the register you are trying to update the material into through J1IH > Additional excise.
Please check if you have set any default in the table "Utilisation determination" (SPRO >LG >India > Business transaction > Outgoing excise > utlisation determination") If you have set 100% utilisation to happen from PLA then you have to upload some balance into PLA a/c through J1IH > TR6C , else use J1IH > Additional excise for Rg23A and C.
Sloution2
If you use J1i3 tcode for creating excis einvoice then the system will go for immediate utilization of the cenvat account and if there is no enough balance ie; cenvat from purchase is less then u will end with the above error message.
So in that case we cn go for J1iin tocde for creating exciose invoice.
Then the utilization will be done at the end of the month while submitting the returns to excise authorities.
and also just check out the procedure that is followed in ur company and go accordingly.
If they wanna go for immediate utilization then check whether they have made any TR6 challan payment and do the posting in system in tocde j1ih ---tr6 challan and increase the PLA BED balance and then do J1i3.
Sloution3
Hope u r updating the RG1 register. As there is no enough balance while creating outgoing excise , do the J1IH - TR6 Challan posting or J1IH - Additional excise to take credit entries of Cenvat.
Sloution4
Check the Configuration of CIN.
IMG >> Logistic General >> Tax on Goods Movement >> India >> Business Transaction >> Utilization ....
Sloution5
The details are very clear.
what is the balance do u want to carry out.
The error clearly mentioned the avilable balance is not enought to carry out the current transaction.
Please increase the balance by either taking credit or deposting into Personal Ledger Account.
hi gurus,
while creating excise in voice using the t code j1iin
i am getting the following error
Excise modvat accounts not defined for TR6C transaction and 2 excise group
Message no. 8I402
kindly help me
munichandra babu
sloution1
hi,
go to this path : Logistic Genral==> Tax on Goods Movement ==>India ==> Account determination == > Specify GL Acounts per excise transaction..
here u have to maintain ur Excise Grp, TR6C, Company code, chat of A/C and correct GL account.
I created a excise invoice for factory sale. While updating the register
J1I5 Update the RG 1 and Part I registers
it is not simulating. Why is there any customization setting i have to do or what?
kindly help in this matter
Sloution1
Hi,
You need to set the movement types that are relevant for various registers.
spro -> Logistics general ->Tax on goods movement -> India -> Business transaction -> Incoming excise invoices ->Specify which movement types invoilves excise invoices.
Please check that.
Sloution2
First create receipt entry for Classification Key "RMA" for movement type 101 and then create for Goods Issue with Key "IDH" for movement type 601
Also check in SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Incoming Excise Invoices > Specify Which Movement Types Involve Excise Invoices > Here specify 101 and 601 for RG1 Register.
While creating excise invoice. the invoice not picking up the value aed,bed . In billing document the condition is appearing
I put H in PR00 still it is happening like that
kindly help in this matter
Sloution1
pls check the condition type defined at the step, is it the same as used in Billing doc where the excise value is coming.
SPRO > Logistics - General > Tax on Goods Movements > India > Determination of Excise Duty > Maintain Excise Defaults
Sloution2
You need to check two things if condition values are not copied to the excise invoice.
1. Go to Logistics General>Tax on Goods movements>India >Basic Settings>Determination of Excise Duty>Maintain Excise Defaults
Here you need to maintain your condition types of your BED, Ecess, SHE cess in A/R BED cond, A/R Ecess cond and A/R AT1 cond. Then try to cerate excise invoice.
2. Go to Logistics General>Tax on Goods movements>India >Basic Settings>Determination of Excise Duty>Condition-Based Excise Determination>Classify Condition Types
Here you need to assign your condition types of BED total Ecess total and SHE cess total if you are using totals condition types. Otherwise you leave it blank.
Let me know still you have peoblem in this.
Sloution3
All Excise Component and Cess Totals (JEXT,JEAT,JEST and JECT) must have Statistical Checkbox marked in V/08.For the Condition records totals, select the Key Combination: Sales Organization with value: 100%.
Can you specify what Key combination for Basic Excise Duty (JEXP) you are using? I prefer the Country/Plant/Control Code/Material combination.
It is not out of context to mention here, that whatever your Condition Type for Basic Price (PR00 - ZPRI in my case) is, it must have the 'Condition Category' as H - Basic Price in V/06. This is an extremely important setting until made this setting,all Excise Calculations will go into a tizzy.
Check out the above and let me know.
Best regards,
Sloution4
The condition type which you are using as base value should have the condition category as H.....check this out and let me know...
Cheers
Sloution5
pls also check the configuration setting done at :
SPRO > Logistics - General >Tax on Goods Movements > India > Basic Settings
Sloution6
Thats means you need to have a balance for utilisation.
To solve this you can do one of the two things.
Create some puchase orders in MM. Whenever you purchase the excise duty is credited into your Rg23A part2. This will show in your utilisation balances in J2iun.
Or else you can post some amounts into PLA accounts in J1IH transaction using JVs.
I hope your configuration on all these accounts in LG- Tax on goods - Account determination is in place. If not you may have to do that before this.
Sloution7
If you use J1i3 tcode for creating excis einvoice then the system will go for immediate utilization of the cenvat account and if there is no enough balance ie; cenvat from purchase is less then u will end with the above error message.
So in that case we cn go for J1iin tocde for creating exciose invoice.
Then the utilization will be done at the end of the month while submitting the returns to excise authorities.
and also just check out the procedure that is followed in ur company and go accordingly.
If they wanna go for immediate utilization then check whether they have made any TR6 challan payment and do the posting in system in tocde j1ih ---tr6 challan and increase the PLA BED balance and then do J1i3.
Sloution8
are you sure you are getting this when you do J1I5? You can deposit some amount to the register you are trying to update the material into through J1IH > Additional excise.
Please check if you have set any default in the table "Utilisation determination" (SPRO >LG >India > Business transaction > Outgoing excise > utlisation determination") If you have set 100% utilisation to happen from PLA then you have to upload some balance into PLA a/c through J1IH > TR6C , else use J1IH > Additional excise for Rg23A and C.
Sloution9
Hope u r updating the RG1 register. As there is no enough balance while creating outgoing excise , do the J1IH - TR6 Challan posting or J1IH - Additional excise to take credit entries of Cenvat.
Please maintain the customizing settings for automatic utilization
Excise modvat accounts not defined for TR6C transaction and 2 excise group
Message no. 8I402
Sloution1
Go to IMG Path -- Logistics-General --> Tax on Goods Movements --> India --> Basic Settings --> Maintain Series Groups.
Here for the combination of your Series Group and Excise Registration, select the box Imm util This will solve your first issue
For your second issue, again select the next tab Account Determination and click on Specify Excise Accounts per Excise Transaction. There maintain as follows:-
ETT::SubTmTy::::DC Ind:::::::::::Account Name
TR6C::::::::::::CR Credit::::::PONHLD PLA on hold account
TR6C::::::::::::DR Debit:::::::PLAAT1 PLA AT1 Account
TR6C::::::::::::DR Debit:::::::PLABED PLA BED account
TR6C::::::::::::DR Debit:::::::PLAECS PLA ECS Account
TR6C::::IP::::::CR Credit::::::ONHOLD CENVAT on hold account
TR6C::::IP::::::CR Credit::::::PONHLD PLA on hold account
TR6C::::IP::::::DR Debit:::::::PLAAT1 PLA AT1 Account
TR6C::::IP::::::DR Debit:::::::PLABED PLA BED account
TR6C::::IP::::::DR Debit:::::::PLAECS PLA ECS Account
TR6C::::IP::::::DR Debit:::::::RG23BED RG 23 BED account
TR6C::::IP::::::DR Debit:::::::RG23ECS RG 23 ECS Account
Once you maintained the above, click on next level Specify G/L Accounts per Excise Transaction. Here for the combination of Excise Group, Excise Transaction Type (TR6C) and Company Code, maintain the relevant G/Ls and save.
Sloution2
Create the Excise Group and assign the Modvat a/cs.
Sloution3
go to this path : Logistic Genral==> Tax on Goods Movement ==>India ==> Account determination == > Specify GL Acounts per excise transaction..
here u have to maintain ur Excise Grp, TR6C, Company code, chat of A/C and correct GL account.
Sloution4
go to this path : Logistic Genral==> Tax on Goods Movement ==>India ==> Account determination == > Specify GL Acounts per excise transaction..
here u have to maintain ur Excise Grp, TR6C, Company code, chat of A/C and correct GL account.
STILL I AM GETTING THE SAME PROBLEM
KINDLY HELP ME
WHERE I HAVE TO MAINTAIN THE BALANCE FOR PLA A/C
t.code or path
THANKS AND REGARDS
munichandrababu

Hi Munichandra Babu,'
Goto J1IH and select TR6C and then select the accounts for which you want to post the amount. Enter the amount and Save. Before saving dont forget to post the cumulative accounts amount in PLA on Hold Account.
Best Regards
Sri

Unit of measure conversion for CIN is not relevant for pricing

During creation of Ad item type order, when we enter the planned ad size e.g. A CO (Columns) x B IN (Inches), the system is showing a message "Unit of measure conversion for CIN is not relevant for pricing" and pricing is not determined in the Billing Data Set. However if the planned ad size is maintained as A CO (Columns) x B MM (Millimeters), there is no impact to pricing conditions.
Any light how to fix this issue?
Thanks,
Suseela. V

Dear Suseela,
You need to maintain Unit of conversion using transaction code JH51. You have to follow the path Logistics-Advertising Management-Master Data-Conditions-Order/Billing Document-UM for Pricing.
Here you can maintain combination using Booking Unit, Content Component, Design type and assign Unit of Measure to get relevant pricing into billing set conditions.
Hope it will help. Thanks!
Regards
Indra

Does CIN work on Win8.1 32bit ?

Works fine for Windows 7 32bit.
LabVIEW 2013 SP1 32bit.
PS. Old CINs. not creating new one.
George Zou
http://webspace.webring.com/people/og/gtoolbox
Solved!
Go to Solution.

Hey George,
I just tested out an old example using a Code Interface Node on a computer running Windows 8.1 with 32-bit LabVIEW 2013, and it worked just fine.
Thanks,
Myriam
Applications Engineer
National Instruments

Free of Charge Process in CIN Version

Hello CIN gurus
My CIN experience is little rusted. I have a question around Free of charge process CIN specific.
When I use item category YANN (copy of TANN) and the Pricing field is blank the table J_1iexcdtl is not updated with the BED . However if it is flagged as "B" the BED is updated in the table.
I am not convinced that this is the solution as we have the free goods functionality for other countries and it would impact those processes.
Any idea how I can achieve this requirement in CIN without the flag"B"?.
Thanks a lot
Sunny

Hi,
As per my openion don't use the TANN item categeory. Define new pricing procedure there please keep price statistical and use R100 condition type with G/L assignment (expenditure).
Hope you got Idea.
Thanks

CIN for credit memo and debit memo

HI
I have manufacturing scenario with excise(CIN) where i need to issue credit and debit memo to customers
Please let me know how this has to be handled in excise point of view,how excise document has to be created,
What is the ETT for credit and debit memo and what is the accounting entries for this

Please search the forum. This has been discussed many times in the forum.
thanks
G. Lakshmipathi

CIN: Return STO process

Hi All,
I have the scenario regarding to Return STO process.
Step1: Creating the return STO process.
Step2: Negative goods receipt through MIGO. The movement type is 161.
Step3: Creating delivery through VL10B. When iam doing the Post goods receipt (Negative post goods issue) through VL02N iam getting below error.
Error: Purchase Order XXXX does not contain items for a stock transfer
CIN related issue: How to handle the CIN ACTIVITIES. What transactions we have to use for updating or adjusting the Cenvat accounts. And what documents we have to use as references.
Please help me to solve these issues.
Thank you
Regards
Lakshmikanth

Hi All,
Any ideas please?
Regards
Lakshmikanth

Cin in sales and distribution

hi,
can any one tell me the role of CIN in sales and distribution, if possible
post some material regarding CIN configuration.
my e-mail id: [email protected]
thank you.

Hello Sriram,
CIN in other words "Country Version India" is basically used for taxation purposes. Every country has its own tax system..........so SAP has come up with its own country versions for taxation like CIN for India.
The following is the detailed notes on CIN:
Basically Cin is divided in to two types:
1. TAXINJ - Is a Routine Based that is used in the condition types. it will work on the logic what ever is there in the Routine.
2. TAXINN: - Is a condition Record based. Means we have to create condition records for each and every condition type that you are going to use in the Pricing Procedure.
Since Version 4.7 this TAXINN came into picture and start using this.
And one of the important point is since 4.6 c CIN comes a separate package. But after introduction of 4.7 Version, CIN is coming the SAP Package itself and even in the Customer Master Record also we will find the CIN Icon.
Basically 4 types of Pricing Procedures are used in CIN and are as follows:
1.JDEPOT - Depot Sales
2.JEXPOR - Export Sales
3.JFACT - Factory Sales
4.JSTKTR - Stock Transfer
Country Version India comes with four pricing procedures as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID, and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess)
Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
this start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilization
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
You enter the exchange rate type to store different exchange rates.
Example
You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
Specify whether it is a manufacturing site or a depot.
Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, multiple credits
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to avail the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no creates' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock.
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity, you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
Specify the conditions in the sales order that are used for excise rates.
Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
IndiaMake for Logistics General, by choosing Taxes on Goodsthe settings in Customizing Basic Excise Duties Using Condition Technique and Movements Account Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose.
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Maintenance screen, which you can MasterExcise Rate access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.Data
You maintain the following types of data:
Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
Customer master data
similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
Material master data
each material is assigned a chapter ID.
Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use : In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
For taxes on purchases, use the condition types contained in the tax procedure.
For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
You have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
VS1 (basic excise duty)
VS2 (additional excise duty)
VS3 (special excise duty)
VS5 (sales tax setoff)
MWS (central sales tax)
MW3 (local sales tax)
ESA (service tax)
ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use subtransaction types, enter the accounts for each subtransaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for alltransactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
Logistics General 1. Go to IMG Define Structure of Data ScreenMaterial Master Configuring the Material master Screen Sequence. for each
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade Import, Excise related subscreen appears.
MASTER MAINTENANACE.:
Transaction Code : J1ID
1. Chapter id Description Master : - Excise chapter id and description as per law will be maintained in this master. With out maintaining the chapter id in this master we can not proceed to other masters. Maintain the chapter id in format xxxx.xx
2. Material / Chapter id combination :- Excisable materials with chapter id details for a plant is maintained in this master. In case of Raw and Packaging materials we will be maintaining for branch plant only. But in case of FG even CPs details will be maintained. If the material is a base material used for subcontracting then give a tick in the check box in the coloumn subcontrs. Choose relevant material type from drop down menu. In the coloumn GR-xref, select Multiple GR for one Excise invoice-Multiple credit from the drop down menu. Enter 1 in the declared coloumn. With out this value in this coloumn the material will not be subjected to excise procedures.
3. Material assessable Value:- In this master, plant wise (including CP plants) assessable values for FG are to be maintained. MRP per CBB and per ATC will be enetred in Net dealer price coloumn. Assessable value per CBB and per ATC will be given in Assessable value coloumn with effective date in the valid from coloumn. Since it is not possible to maintain differential MRP for the same SKU in this master, the MRP and Assessable value details for despatches from branch plant will be maintained in SD module. In this case we should not maintain the details in this master for branch SKUs and details will be maintained only for CPs.
4. CENVAT determination :- Plant wise MODVAT input materials will be listed in this master with one of the FG as the out put material. This master will be maintained for branch plants only. If the input material is not maintained in this master MODVAT credit can not be availed.
5. Vendor Excise details: - Vendor Excise details such as ECC no, reg no, Exc.range, Exc.div, Exc.coll, CST, LST nos, PAN no will be maintained for all Excisable materials vendors. In the coloumn Exc.ind.ve enter 1. With out this value in this coloumn the MODVAT procedure will not take place. We are not maintaining SSI status in this master.
6. Customer Excise details:- For such of those customers for whom invoices are to be raised from branch plant details are to be maintained in this master. The excise details can be blank for customers bur CST and LST no are to be entered. In the coloumn Exc.Ind.Cus. Enter 1. With out this value in this coloumn, Excise invoice will not be generated for the customer.
7. SSI rate: - We will not be maintaining this master. At the time of capturing the MODVAT details we can enter actual duty details as per the Excise invoice received from the Vendor.
8. Excise indicator for Plant:- Excise details such as ECC no, Range etc. for the branch plant will be maintained here. In the coloumn Exc.ind.co maintain a value1
9. Excise indicator for plant and vendor and Excise indicator for plant and customer: - Initial Configuration masters need not be maintained by users.
10. Excise tax rate: - Chapter id and tax rates combination is maintained in this master. In the ExcInd coloumn enter1.
11. Cess rate:- Cess rate if applicable will be maintained in this master.
12. Exceptional material excise rates:- If differential excise rates are applicable for a material falling under same chapter id , this master will be maintained.
13. Quantity based AED & SED: - If applicable the details will be maintained here.
Some of the check points pertaining to Masters.
For raw materials, the assessable value will be picked up from PO.
For FG, the assessable values only for CPs are to be maintained in this master.
Excise indicator in Vendor / Customer excise details is mandatory.
Chapter ID, material Chapter ID and Excise tax rates - should contain all the relevant tax details.
CENVAT determination correlates the raw material to finished goods. All new materials are to be added without fail.
Material Chapter ID - for conversion activity (only base matl.) sub-contracting indicator has to be checked.
Material Chapter ID- excise indicator is to be ticked.
For removals from branch plant (raw material/finished goods), CST/LST numbers have to be given in the customer masters, which is used in Excise invoice printing
Path is : IMG - Logistics General - Tax on goods movement - India
http://help.sap.com/saphelp_47x200/helpdata/en/5a/d34a9f544811d1895e0000e8323c4f/frameset.htm
Reward if helps
Regards,
Sai

MM:CIN

Similar Messages

Maybe you are looking for