MM Configuration for integration with SAP SNC
Hi,
I need to make MM configuration required to support PO collaboration and SMI process integrating with SAP SNC.
ANy kind of information would be very much helpdull
Thanks
Vikas
Hi Vikas,
MM configuration for PO collaboration is depend upon the your requirements. e.g. You want to upload the confirmations send by the supplier from SNC web UI to your R/3 system you have to use confirmation control key while creating PO in R/3 and make corresponding supplier confirmation control either optional or mandatory in SNC configuration. Default provided by SAP is optional.
Remember supplier can create confirmations only if ther either optional or mandatory.
Regards
Pravin
Similar Messages
-
IFbA capabilities for integration with sap business workflow
Hi Everybody,
Here I have some questions concerning to IFbA needing your kind help ASAP:
1, Adobe compatibility with 46C
Any sample of solution on this, better with Business workflow running in 4.6C
2, Content management
How to manage a IFBA big file and attachment in workflow environment?
3, Portal integration
If IFBA could be integrated into IBM portal and how?
4, Partialy data input and authorization control
As to the IFbA used in a workflow,is it possible to set form properties and rights so that only permited users at some stage can see/change some specific fields. Here it should have some dynamic adaptability to different users, that is different users will have different experience to the same form.
Thanks in advance!
DavidI would like to know as well about this, did you get an answer?
Thanks for any pointers. -
Mix of SAP Gateway and non SAP Gateway for Integration with SAP
Hello,
I am looking for a document on where SAP NW Gateway fits in as part of an integration overall strategy. So, for example, my understanding it is primarily for Mobile app integration. I hear some customers talking about using Gateway for what we normally think of as EAI core integration. So, it does not seem right to me in many typical SAP integration requirements would be handled via Gateway. Other traditional SAP integrations via PI or another ESB leveraging enterprise services, SAP API like BAPIs and IDOCS would be more appropriate in many non-mobile type situations.
Does anyone have general guidance on the above integration advice, thxA good discussion..If I can add few things
1) PI REST Adapter is planned, should be available sometime in near future..
I do not think every integration scenario should be handled in Gateway (rather oData style) just because it can or it might work thinking. Doing it odata style means you need to re-write all functionalities as Web Based Services (eSOA anyone??)
2) Gateway (oData Services) - should be used in User to System scenario ( mobile, browser light weight type) , where you would want to transfer minimal data to the user and back
3) PI - System to System as you mentioned. e.g. Master Data/Customer Synchronization between ecc & crm etc. Doing them in oData style seems like overkill to me when you can use the IDOCs/ALEs and you do not need the data to be transferred over HTTP.
Both Gateway and PI are targeted for different scenarios and have their own place, and as such the right product should be evaluated carefully for each scenario.
Just my two cents.
Sandip -
SAP SNC Supplier Network Collaboration integration with SAP ERP via BizTalk - experiences?
Hello,
had anybody experience in integration of SAP SNC Supplier Network Collaboration with SAP ERP via BizTalk Server?
Versions: SAP ECC 6.0 Ehp5 SPS11, SAP SNC current version (7.0?)
We will have to integrate following processes:
Master Data integration, PO Purchase Order, Forecast, SMI Supplier Managed Inventory
Usually SAP takes an SAP PI middleware for this, where the full implementation can be downloaded from the SAP marketplace, but we want to avoid having an additional Integration Platform with maintenance etc.
Are there experiences, success stories, pitfalls, issues to be known, recommendations, known efforts in this forum?
Thanks in advance.
JensHI Jens,
In our forum, we discussed topic about BizTalk & SAP Integration before, hope it helps you.BizTalk
& SAP Integration
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Plz send step by step process for Outlook integration with SAP
Hi Basis experts
Plz send step by step process for Outlookexpress integration with SAP.
plz send if anybody have at the earliest.
advance Thanks& regards to all
SupriyaDear Supriya,
If it is in SAP then please go through the below mentioed site
http://www.duet.com/
please tell me where in you want to integrate?
Outlook Configuration with SAP-EP is a PPT file.
please mail me your id i will send it accross. -
Brief discussion on SAP XI and its' Integration with SAP MDM.
Hi,
I have never worked on SAP XI.
I am discussing it on brief, please give your valuable replies.
SAP XI consists of System Landascape Directory(SLD).
SLD Consists of Business System and Techinical System.
Technical System contains all information about the software
component. The Business System consists of Inbound and Outbound Business
System which are used as logical names for data transfer.
There is communication Channel for Receiver and Sender Business System and n agreement
is signed between Sender and Receiver.
Outbound Interface defined for Business System Outbound and Techical System associated
with the Business System,
Inbound Interface defined for Business System Inbound and Techical System associated
with the Business System.
In SAP NetWeaver XI Integration Directory, we have defined the Integration Scenarios,
Actions, Interface Objects, Mapping Objects, Adapters Objects.
Mapping Object defines the Structure and Value Mapping.
Adapter Objects defines the Adapter program which implements RFC Adapter, FTP Adapter logic.
FTP Adapter is used for XI-MDM Communication.
RFC Adapter is used for XI-ECC Communication.
Integration Repository: Both Outbound and Inbound Interfaces are Mapped with Value mapping and
Structure Mapping inside Integration Repository.
The File Adapter takes the File from the Outbound port of MDM System
and sends it as IDOC to Receiver Business System.
Value Mapping must be done between Sender and Receiver interfaces.
Value Mapping is done by XSLT or Java based program.
SAP NetWeaver XI Integration Server at runtime:
Message Split, Interface Determination, Receiver Identifaction, Mapping, Techincal Routing
and Call Adapter Proccess are done.
In SAP XI 3.0 and MDM 5.5:
Step 1: Create busines system as service.
Step 2: Create communication channel for each business service. If the system can communicate
through different channels, then create all possible channel types if necessary.
Step 3: Create receiver agreement between the systems.
Step 4: Interface determination:
- Here you see for the first time the software component mentioned;
there are some special requirements regarding this software component in relation to the customizing ID mapping.
- To modify this software component, the customer needs to copy the SAP standard delivered software component
into its own namespace. The customer is able to modify to create archives
for the customized ID mapping.
Receiver determination.
Configure an FTP Server on the MDS.
Create a send folder for outbound messages using outbound port(s) for
remote systems(s).
Create receive folder inbound messages using inbound port(s) for remote systems.
This ia all about concept of SAP XI Infractsture and its' Integration with SAP MDM 5.5.
Regards
Kaushik BanerjeeHi Kaushik,
You must be aware of File types that MDM Import Manager can Import i.e. we have XML, Excel etc. Now there are two transactions to extract data from R3
1. MDMGX -
- For lookup table extraction
- Output in XML format which MDM can import without using XI.
- FTP can be configured to put the file in the desired folder which will be then picked by Import Server.
2. MDM_CLNT_EXTR -
- For Main table records.
- Output is in Idoc format which MDM doesn't understand hence we need XI in between which converts Idoc file received from R3 into XML which can then be imported using Import Manager or Import Server. For this we need to implement XI Scenario that consists of Source System, Receiver System, Type of Data etc.
Just a basic understanding...
Regards,
Jitesh Talreja -
MS Word integration with SAP CRM: can a PDF be created from the MS Word doc
21/11
Gurus,
I know have a better understanding of the topic but still have 2 open questions.
I now know that StreamServe cannot read .DOC files but can read and work with .PDF files.
Since we are in a SAP forum and not a StreamServe forum,
1/ I am wondering if SAP CRM 2007 can convert the MS Word generated and populated documents into .PDF. Possibly immediatly.
2/ Can the MS Word generated and populated documents be saved by SAP CRM 2007 as .XML files?
Thanks again.
Dear All,
On my project, there is a requirement to generate ad-hoc and amendable letters in CRM (2007).
We might have +150 letters so I am thinking about using MS Word integration with SAP CRM to deliver this.
With SAP CRM 2007, I understand that it is indeed possible to generate WebServices that will then be consumed by Word templates through the mail merge functionality. So agents will not have to enter BP name, address and so on. All this can be done by configuration which is great.
My point of concern is how to integrate this design to StreamServe for printing purpose (we do not want to go into local printing)
Can StreamServe collects the Word generated document?
Should this Word document be converted as PDF before or can StreamServe do it?
Should StreamServe exploits the XML contents within the Word generated document?
Thanks for your help and insights about this.
Brice.
Edited by: Brice Vialle on Nov 21, 2008 9:26 PM
Edited by: Brice Vialle on Nov 21, 2008 9:34 PMHi Chris,
Your advice helps me a lot, thank you.
I upload an XML-Format template Word Doc to server as a MIME Object.
When OfficeControl is started in Web Dynpro, OfficeControl automatically open the XML-Format template.
For the first time, I get the XString-type Context attribute bind to the content of the Word Doc,
then translate it to string, I got the XML-format content, it's great!
However, after the first time, when I input any new contents in MS Word in Web Dynpro,
no matter I execute "Ctrl + S" or click the "savedocument" button,
when I translate the XString Context attribute to String, I got messy code. (but the first time, it is good plain text)
I use the function module: ECATT_CONV_XSTRING_TO_STRING (good for first time, dump after first time),
SCMS_XSTRING_TO_BINARY, SCMS_BINARY_TO_STRING (good for first time, messy code after first time).
My Demo source code is in: (system) SMV --> (local object) zhaode --> (Dynpro Component) ztest_office_control
core source code is as:
clear itab.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
BUFFER = lv_datas
IMPORTING
OUTPUT_LENGTH = lv_length
TABLES
binary_tab = itab.
CALL FUNCTION 'SCMS_BINARY_TO_STRING'
EXPORTING
input_length = lv_length
mimetype = 'text/plain; charset=utf-8'
IMPORTING
text_buffer = lv_datas_string
output_length = lv_data_len
TABLES
binary_tab = itab.
Can you give me some advice?
Best Regards,
Derek -
BOXI 3.0 integration with SAP Portal
Hi All,
May I know how to integrate BOXI 3.0 reports with SAP portal 7.0/7.1?
Best Regards,
RiteshHi,
Please find a thread to understand BOXI integration with SAP portal.
Configure BO with SAP Portal
BO integration kit for SAP is available at
https://boc.sdn.sap.com/node/18962
Best Regards,
Ritesh -
SAP E - Recruitment Integration with SAP PA ES Module
Hi all,
I have SAP Recruitment Application to be integrated with SAP PA_ES Module (SAP HR) through XI..
Now I have 2 questions;-
1.Does SAP recommends both the above mentioned applications on same SAP BOX ie the system will have both the application with the different clients on SAP system or a sort of addon...If yes , how the integration can made?
2.What is recommended/Suggested scenario for integration i.e. which adapters shall be used for this configuration??
it would be really very helpful if someone could throw some light on this
Regards,
AshwinMAswin
Why dont you check the following thread for more info
E-Recruitment
regards
krishna -
Third Party Recruitment Software integration with SAP HR
Dear Experts ,
Iam given a scenario where in the client wants the Erecruitment software Taleo to be integrated with SAP HCM.The HR recruiters/Managers are currently hiring them into the taleo software and from there the data need to be pushed to the SAP employees's infotypes.
In Addition to this the benefits infotype need to be maintained automatically in the system.Is there any way to automatically default the benefit infotype also
Kindly suggest a solution for this.
Regards
GopaYou will need interface(s) between Taleo and SAP....If Taleo is your recruiting system...then they may want...
Outbound from SAP: Interface that sends them vacant position data from SAP (you need this so that when Taleo sends you finally an employee data after hiring they can send you the position data with it).
Outbound from SAP: You may also need to send them terminations from SAP (optional - may be needed depending on your company process for handling rehires)
Inbound to SAP: This is the main file from Taleo after offer is accepted and employee is hired in Taleo. At this time Taleo will send you a file for which you can write an interface to hire these employees into SAP. You can do a BDC session with PA40 - you may have to determine if its a hire or rehire here. If you are processing payroll then its important to make sure you have all the payroll related info types (if they are not coming from Taleo then you should at least have them defaulted to what your client agrees).
The second part to your question
Creating benefits depends on how you are getting or determining benefits data.
1. Benefits configuration has something called automatic/default plans...
>>> "Automatic" plans are something employee is enrolled into and has no option to change them.
>>> "Default" plans are something employee is enrolled into on new hire and typically has 30 days to make changes...this is standard configuration for each plan and should be completed.
If it is controlled via benefits config then you just need to go through hire action...and typically as part of that hire action - IT0378/IT0171 will prompt you to go to benefits enrollment screen and enroll employee...into these automatic/default plans...plans will be pre-selected based on configuration. So all you do here is hit save and continue with rest of hire action. All this is recordable via BDC session.
2. If it is NOT controlled via configuration...and you are getting benefit plan details in the file then you just create them in the corresponding info types...IT0167/0168 etc. For processing sanity I would separate hire and benefits creation as two step process if all the data is coming via files...
Happy interfacing... -
SAP Sourcing 7.0 integration with SAP ERP - issue with SAP PI
Hi All,
We are integrating SAP Sourcing 7.0 with SAP ERP 6.0 with SAP PI 7.1 in middle. So the Sourcing will talk to PI and this intern will talk to ERP. Sourcing is on oracle 11g where as PI and ERP are on SQL 2008. All these 3 are on windows 2003 x64.
We are following the "Configuration Guide Integration of SAP ERP and SAP Sourcing 7.0" provided by SAP.
We have successfully configured Sourcing and PI systems as pe the document. In Sourcing, by using background jobs we are able to successfully generate files in "export" folder which is part of FTP directory.
However the issue is with PI, we configured the "configuration scenerio" in Integration builder and point all channels to the FTP folder in Sourcing. But PI is not picking up these files.
Is there any way to trigger this in PI system. Or do we need to do anything in sourcing itself.
Regards,
Siva.Hello Siva,
I am thinking that you may need to deploy FTP adapter in PI to get this process work fine but not sure.
Let's see what other experts suggest.
Thanks,
Siva Kumar -
How can SMART METER Technology be integrated with SAP ISU system?
At present the SMART METER technology is integrated with SAP ISU through a third party vendor. The idocs are sent to a third party and the readings are downloaded and sent back in idoc segments.
How can the integration be done without the third party intervention.HI
SAP XI needs to be used for 3rd party intervention to send and recive idocs..
or there are some thrid party softwareslike MDUS ,meter data utilisation system.which wil be again a interface between sap and ami system
so basically its like sap syst--sap xi3rd patry 4 ami comapnyami system
kr
raj -
User license query while integrating with SAP HR system
One of our clients wants to develop web based employee self service applications (web enabled modules) on their existing SAP HR suite.
Currently they are on SAP HR , ECC 5.0
Would they need to buy extra licenses for integration with the existing system or can the existing licenses be used concurrently?
I am not sure where to look for this piece of information. In case this question is inappropriate to this forum my apologies for the same.
Best Regards
YuvarajYuvaraj,
The best thing would be for your client to contact their SAP account representative and check how many and what type of users their existing licensing agreement with SAP includes.
Best Regards,
Alexandra -
Weighing Scale integration with SAP ( Packing Station)
Hi All,
We need to have our Weighing Scales integrated with SAP to capture the READINGS for parcels / cartons / shipments automatically.
I observe there is a provision for maintaining RFC connection , Scale Checkbox etc in SPRO--->Logistics Exec ---> Packing --->Set profile for packing w.r.t HUPAST tcode ...
Would you plz help me with some work-arounds ...???
Regards
JamnaHi Folks,
There is XMI technology available that can be potentially leveraged for this type of requirements in integrating any electronic gadgets talking to SAP ....
I think SAP XMI will be vry useful for this.
XMI is having ability to capture real time data from other system and update accordingly.
It has have connectors which will capture values from other system and pull in SAP.
How to Integrage Weigh Scale with OPC server via xMII 12.0
Hello Experts,
I am new to xMII. We want to integrate shop floor weigh scale into SAP PI Sheet to read the value from weight scale into PI Sheet. We have the infrastructure Ohaus weigh scale, xMII 12.0, SAP ERP 4.70, Kepware OPC Server, installed xMII framework for UDS and UDS 4.0. We are able to integrate the OPC Data tags into SAP PI Sheet successfully. But we need help to integrate weight scale with OPC server to read the scale value into OPC data tag.
Can any one give the steps to integrate weight scale with OPC server?
with best regards
K. Mohan Reddy
I know someone who have developed few applications on integrating weighing machines with R/3.
By: | 04 Dec 2008
i am working as a ABAPer in my company and developed DLL in VB6 on integrating weighing machines with R/3.
implemented and working in more than 10 sites.
By: | 12 Dec 2008
ERP-Scale from Pocket Programs provides a standardized u201Cplug & playu201D interface for weighing equipment. It is SAP Certified and can be used for integration of weigh-scales with the SAP Packing Station transaction (HUPAST) or with custom ABAP developments. Major international companies are already gaining benefit by implementing ERP-Scale in their plants worldwide.
By: | 04 Feb 2009
Re: Custom development for UDS
What have to say folks about the possibilities with the above ? But shouldnt SAP have some standard FM / RFC / BAPI owefully facilitating the same???
But the available FM HU_GET_RFC_DATA doesnt have any documentations attached to it ?
Regards
Jamna -
Issues in BO integration with SAP EP
Hi All,
integration of SAP EP 7 and BOexi3.1.
My requirement is to show the BO WEBI reports in portal. My scenario is like directly connecting to BO from EP using SSO with out connecting to BI.
For Bo,Only data is comming from BI , Roles and user creation are saperately is done in BO only. Is it possible to connect do sso between SAP EP and BO with out connecting to BI.
BO is not using any Active Directory., users and roles are created in its own database and Portal users are stored in ume data base. how to achive sso between SAP EP and BO.
Thanks
RajeevHi,
Go through the below link which gives great details on the BOXI integration with SAP EP.
http://wiki.sdn.sap.com/wiki/display/BOBJ/IntegrationofBOEXI3.1intotheSAPEnterprisePortal+7.x
You should be able to get the SSO details also here.
Regards,
Noor.
Maybe you are looking for
-
Hello, I'm trying to understand whether I'm the one who's crazy, doing something wrong, or whether Windows Firewall was designed to be broken (and stay that way through Windows Server 2008 R2!) When I go to Windows Firewall with Advanced Security fro
-
Upto how much I can set maximum Heap size for jvm?
I am running application on 8GB RAM Windows 64 bits machine. I am running out of OutOfMemory (Heap Space). I want to increase the Heap Size for my jvm. But can anybody please tell me what is the limit by which I can set the maximum size for heap? Tha
-
I just bought a new computer that uses Windows 7. I successfully restored my Elements Catalog. But when I click on a photo in the Organizer, then click on Edit, then on Edit with Photoshop, all that happens is I see a moving circle, then briefly an h
-
[solved] problems w/rich client component demo
Hello - I've been trying to run the rich client component demo as described in http://www.oracle.com/technology/products/adf/adffaces/11/doc/demo/adf_faces_rc_demo.html in TP2 of JDeveloper 11. I've run into a few problems. (I am assuming that the ar
-
What is the longest datatype for an integer
i tried to initialise an integer with a value 4000000000 i tried int and long... but keep having an error: integer number too large: 4000000000what should i do?