MM configurations for SAP AFS System

Hi,
        I'm working in MM configuration for SAP AFS production system, After uploading AFS Materials successfully and also created Purchase order to make a stock for that material, but PO created successfully but not able to do Goods receipts for created PO.
       Errors : Purchase order xxxxx has no items,
Once created sales order for the same material again we got the error while GR but error is different.
      GR is not possible for this PO number.
But material type is ROH , and its external procurement only.
Please let me know when we will get this type of errors.
Thanks and regards
Nisar.

Hi Nasir;
Some possible causes are;
1.     Defining inbound delivery (Or kind of a confirmation) in the PO LI level and not maintaining the document subsequently
2.     Not releasing the PO before the GRN
3.     Creating the PO with a material with Grids (AFS Basic Data Screen) and not maintaining the grid value at item detail level of the PO
Azwath Mohammad
http://www.sapafs.net

Similar Messages

  • Error in the configuration for sap logon tickets

    Hi Forum,
    I use Tcode crmd_order_bp to see the BP cockpit and the error message displays as
    <b>Error in the configuration for SAP logon tickets</b>
    But if I click "Yes", system displays cockpit.
    How can I avoid this error.
    Thanks in advance
    Regards
    Shridhar

    You will still need to configure SSO (either by logon ticket or username/password). The data source access is done using the username/password configured in the UM Config dialog box.
    I can see where you're coming from with your thinking, however logon-ticket-based SSO is probably the best approach.
    Cheers,
    Darren.

  • Hi, what's the impact of creating sites through configuration in Sap retail System?

    Hi Experts,
    Business requirement is to have a production plant created through config in retail system and then ship the finished product to DC using STO's and Dc will be created as master data in retail system. please share your experience on business impact on this integartion of production plant and site in Retail?
    Thanks in Advance !

    Hi Govind,
    In SAP Retail system, the options for creating plant from configuration is disabled. Means in SPRO screen, the execute button is not there for these options. So you will not be able to create plant through configuration in SAP Retail system where the retail switch is activated.
    All the Retail related features will not support that plants.
    To the best of my knowledge, Site created in Retail system using WB01 transactions can be used for production cycle to implement manufacturing scenario. Using article to article stock transfer you can transfer the stock of Finished Goods articles to trading articles and so on.
    Various processes are available for this.
    Let me know if you need any more information.
    Regards,
    Amit

  • Message "Creation of DataSources for SAP source system is not permitted"

    Hi,
    I am in DW Workbench: Modeling and I need to copy a DataSource.
    It's impossible, beacause I have this Message "Creation of DataSources for SAP source system is not permitted"!
    What can I do?
    Thks

    Hii.
    You can not copy the standard datasource to any other source system it will not allow you to do that.
    But if you want to copy you can copy it to PC FILE source system.
    It will allow you to copy there.
    Right click in Datasource->Copy-> Give Target datasource name -
    > intarget Source system tab -
    >Give Source system for File.
    Thanks
    Mayank
    Edited by: Mayank Chauhan on Sep 4, 2009 5:41 PM

  • ChaRM for SAP BI systems?

    Hi!
    We would like to implement ChaRM functionality for our SAP system landscape.
    Among others we have 3 SAP BI systems.
    Does some one experience with set up of ChaRM for SAP BI systems?
    Do we have here a different approach as for other systems (e.g. SAP ERP 2005)?
    Thank you very much!
    regards
    Thom

    Hi Thom,
    we are using a ECC landscape, a BI landscape, a Solution Manager landscape, and a CRM landscape within CHaRM. All landscapes are separate transport landscapes, and there is a transport domain link from SolMan Production system (as this is the transport domain controller).
    To answer your question: The approach is all the same for any landscape (as long as they are just ABAP systems). The approach is different for Dual-Stack of Java systems, you would need CTS+.
    Best Regards,
    Holger

  • Releted to h\w and s\w  configuration for SAP B1

    HI 
    please tell me exat hardware and software configuration for SAP
    B1
    becouse  i am going to implement on (bled server) so is it     possible?
    please replay  with  configuration
    regards 
    sandip

    Hi,
    If you are authorize to sign in with Service partner portal you can download the sizing guide thru' the following link.  You need S-user id (given to partner)
    You can down load sizing guide for B1 vesion 2005 X version from the Document resource center.
    https://websmp103.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000706510&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&
    Regards,
    Venkatesan G.

  • Do we have a separate forum for SAP Project Systems?

    hi
    do we have a separate forum for SAP Project Systems?
    regards
    kish

    hi all
    i got the answer
    its the PLM forum ie. product life cycle management
    Expert Forums  » SAP Solutions  » Product Lifecycle Management (PLM)
    cheers
    kish

  • SAP DMS - How to do an external DMS configuration for the existing system ?

    Hi All.
    Greetings.
    Request help and understanding.
    Am new to the world of SAP. And request SOME clarity for understanding of DMS.
    We are wanting to put an external DMS server and wish to configure for the same.
    So that the load on the production SAP R/3 database is reduced.
    We are now wanting to test the same on Dev environment.
    From SDN Link :
    I understand that :
    DMS basically has a content server. which stores documents.
    That can be accessed through Web, SAP R/3 Gui , SAP Portal.
    I have gone thro various links and the following links i have found to be informative and helpful :
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c31a243c711d1893e0000e8323c4f/frameset.htm
    http://wiki.sdn.sap.com/wiki/display/PLM/DMS+Customizing
    http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
    However, would like to know the following because am not getting the clarity :
    1) Is there any supported platform / compatibility guide for DMS ?
    if yes, can someone send me the link?
    2) We have oracle 11g as our for SAP R/3 backend.
    Windows 2003 server 64 bit system.
    When i check the system status on the dev server of sap.
    It says. ECC 6.0 Rel 7.00 update 20 (hOpe am reading it correctly)
    After much search on the SMP site,
    we finally discovered and downloaded the DMS software for unicode and / 64 bit.
    Which we saw under the maintenance components separately seen for DMS 7.0
    Now for this DMS content server which we would like to make it external for storage of documents -
    do we need to have a separate database for this purpose as a repository.
    If i run a setup of DMS - will that automatically install any default repository for this or
    will it allow me to choose any other repository for the same ?
    Can anyone advise on this.
    Because this link says content server is based on Instance of MAXDB : http://help.sap.com/saphelp_nw70/helpdata/en/59/fba637fcf7dc39e10000009b38f8cf/frameset.htm
    3) I read some thing like this on some of the SDN links :
    P40 - Integration of DMS
    P62 - R&D Document Manage¬ment and Workflow
    P71 - Document management
    What are they referring to.
    4) We would be accessing these thro web, gui, customised portal.
    This content server configuration is a bit confusing.
    5) Is SNC configuration required to be done for the separate DMS server setup.
    If yes, how to do that ? any configuration link for that please ?
    Can anyone advise on the things to do.
    Steps to do.
    What all are the pre-requisites to check, before we start the set up of DMS.
    Can anyone help me understand this whole thing regarding the DMS installation and configuration.
    Step-wise.. from the start to end.
    Because it gives me a lot of uneasiness without having everything in place before we could say we could start the whole process of configuration / installation.
    Many thanks for your help in advance.
    Wishing you a happy and relaxed weekend.
    Kind regards
    Indu

    Thanks christoph & pradeep kumar.
    did a few more research and atleast have come to understand that.
    DMS server installation has content server which works only with MAXDB.
    So my understanding is correct.
    And what we see as Easy DMS is a client installation.
    which probably i would look at at a later stage.
    Found this link to be a little more informative :
    http://www.sapfans.com/forums/viewtopic.php?f=12&t=330558
    I really wish. That life were to be so easy. To call a consultant and finish it off
    Wishful thinking
    thanks and cheers
    indu

  • Managed System configuration for SAP NW Java system in Solution Manager 7.1 SP10

    Hi All,
    I am doing Managed system configuration for my SAP NW 7.01 Java system and getting below error in step 6 create users SAPSUPPORT & SM_COLL_SID.
    "An unexpected error occured. An error occured while processing the UME command READ_USER from agent <hostname> : Server returned: 302 Found "
    I have checked my DAA as well as host agents are up and running fine. My Solution Manager is 7.1SP10.
    Please suggest.
    Regards,
    Manish

    Manish,
    Which UME you are using? portal/ABAP/LDAP
    Are you using the SOLMAN_ADMIN user while configuring.
    Also check the below forum.
    https://scn.sap.com/thread/1167282
    Regards,
    Raja. G

  • Naming changes for SAP business systems

    Hello
    I have developed my interfaces in which most of them are from SAP to third party. We have SAP configured with its SID as the business system (e.g. DC1). Now we are planning to change the name of all the business systems in SLD. I deleted the previous business system from the SLD and created the new one according to newer standard and configured receivers based on it.
    My problem is when I am posting the message through ABAP proxy its still taking the SID as the sender. As a result its not finding the receiver. Do I need to configure the sender in my source ECC system?
    Thanks in advance.
    Regards
    Rajeev Patkie

    Hi Rajeev,
    The Business system details like the client and logical system etc, help the proxy to know where it has to go.
    Not for the sender system from where you are executing the PRoxy will have a Business system .Please check if the information is for the Business system can be seen correctly in the ID>BS>service-->Adpater specific identifiers.
    Also you sender XI adapter is attched to this Business system.
    No what is your receiver? You haven't specified that?
    Also, you can just reactivate the PROXY once.
    Cache refresh??
    Regards
    Vijaya

  • Scot configuration for 4.6c systems

    Hi All,
    After having worked on Ecc 6 systems i am having problems understanding confog for 4.6c systems for SCOT for out bound mails.
    We have a requirement where we need to change the mailhost name.In Ecc we just need to change in scot but whereas in 4.6c how do we change it.Thanks.

    Hi Ambarish,
    You do not configure the mail host in SAPconnect or the IMG but rather in Sendmail or the "other" mail software you will be using. SMTP was not available in releases before 6.10 as the ICM was not available. I will explain the flow of a request below:-
    SAPConnect -> RFC -> Internet Mail Gateway -> Sendmail (or Sendmail equivalent) -> SMTP Mail Server
    As you can see you do not enter the mail host and listening port of the SMTP server as Sendmail is the actual SMTP server. The mail is not relayed via SMTP but RFC from the SAP system and SMTP mail is forwarded from Sendmail. Note that Sendmail is a fully functioning mail server ! This method was not perfect but worked with some configuration.
    Below is a "how to" that will enable you to setup mail routing from 4.6C to Exchange and all you have to do is enable Exchange to accept mails from the Sendmail clone (Emailrelay).
    http://it.toolbox.com/wiki/index.php/Email_from_SAP_-_4.6C_using_MS_Exchange_2003
    Using this method it is possible to send mails from 4.6C to Exchange via a hop via another SMTP server
    Hope this helps
    Michael

  • How to remove the complete ALE configuration for a given system

    Hello everybody,
    Through ALE ,data is transferred between a number of SAP systems and the necessary ALE setups are in place.
    Now,a particular SAP system,which used to be a receivor to the central SAP system,is to be retired.
    Hence,the associated ALE set up is to be completely removed from the central SAP system.
    Is the following sequence correct?If not and I have missed something,please enlighten me with the correct sequence.
    1.Removal of the receivor logical system  and its assignment to client ,through transaction SALE.
    2.Removal of partner profile, through transaction WE20.
    3.Removal of RFC destinations,through transaction SM59.
    4.Removal of transactional ports for the logical system,through transaction code WE21.
    5.Removal of Distribution model between the retiring system and the central SAP system.
          (a)Regarding distribution model,I have a question-if the distribution model is maintained such that it contains the linking relationships between the central system and several receivor systems(in addition to the one I wish to remove),then is it possible to remove only the desired linkage and not touch the rest?   
          (b)Through BD64,I have tried but I am able to delete only the entire distribution model  as a whole,while I would like to keep the distribution model and delete just one of the nodes,so as to cut  the connection between only central system and the retiring system.
    This is so because the other receivor systems are working fine,involving a lot of batchjobs and I am afraid that deleting the distribution model wholly will create unnecessary trouble.
    Any help will be appreciated.Thanks
    Papri

    HI Nicolas,
    I chatted with Rev-Trac support earlier today and here is what they have come back to me with.
    Assuming the change in question was carried out in the development  system. Changes to fields in tables should in most cases be captured in transports. Assuming it was a transportable change then go to the development system and execute transaction SE16 and query Rev-Trac table /RSC/T_MFM_4T filtering by TABLENAME.
    On executing the query you should see a list of transports involved with changes to the transport. You can then check to see if there is a recent transport associated with the change - if so then you can find out who created the transport by using standard SAP functionality."
    If you find this doesn't help, then please contact your Rev-Trac Administrator who can then log a support request on our support portal at www.xrsc.com
    Hope this helps, Rick

  • How can generated EWA for SAP Portal system

    Hi Guru there,
    Usually generate EWA should maintenan RFC, We have SAP Portal systems ( prod PP1 and test PT1 and dev PD1), but they are not appeared at saplogon and no general SAP interface, only operationing system level we can start/stop SAP system and database and from the operating system browser can see the portal work normal ( 50000 port) or not.
    How can I generate EWA from solman?
    waiting for your kind reply!
    best regards,
    WEI

    Hi Wei,
    Do you already know SAP Note <a href="http://www.service.sap.com/sap/support/notes/976054">976054</a>?
    This SAP Note describes the setup of EWA for NON-ABAP Components.
    Please see the description and the attachments.
    Best regards,
    Ruediger

  • Charm configuration for a 4 system landscape

    Hi Experts,
    We are planning to implement charm for a 4 system landscape: Development Server, Integration Server, Quality Server and Production Server.
    We could configure TMS related steps, activated Charm in Solution Manager, created a maintenance project in solar_project_admin.
    However, the standard delivered transaction types like Normal correction and Urgent Correction are not working in a 4 system landscape.  They are only working for 3 systems (DEV, QAS and PRD).
    Are there any documents or blogs that would specially explain all the steps required for 4 systems? Any kind of help would be highly appreciated.
    Thanks,
    Ravali

    Development --> Integration --> Quality --> Production.
    First, I will import the transport of copies into integration
    Yes, and you test the changes here.
    Second, the whole transport is released and imported to Integration - in the Test phase of the maintenance cycle and NC status being consolidated.
    Third - Now, keeping the maintenance cycle in the TEST phase and NC phase in consolidated, will I be able to schedule the transport into quality server?
    Nope. You consolidate your normal correction, which releases your original transport and import them into Integration, and then immediately into Quality (you already proved it worked in Integration) BEFORE you set the phase to Test. Otherwise the original transports are NOT released. And if you set your phase to Test before importing the originals, you'll get a message that you cannot import transports into Quality during this phase.
    If you need to get transports into Quality for break fixes during the Test phase you need to use a Test Message and these are imported during Go-live as well.
    Fourth - if the above process works, I will then change the MC to Go Live and schedule the import to Production.
    With the corrected process mentioned above, yes, you will then change the phase to Go-live and it will import everything that was brought into Quality. 
    Hope this helps.

  • SMSY-Diagnostic Configuration for SAP SRM 5.0

    Hi!
    I would like to set up the Diagnostics for SAP SRM 5.0.
    SAP SRM 5.0 has ABAP and J2EE stack as well (and TREX).
    When I define the system as SAP SRM 5.0 in tcode SMSY and assign the Java system component of type SAP NetWeaver/SAP NetWeaver 04/Application Server Java:
    Unfortunately when I start SMD Setup wizard no java relevant components are visible.
    Furthermore I do not get any data under Workload Analysis and receive:
    The solution / systems you selected do not contain any software components currently supported by E2E Workload Analysis
    My question is:
    What is the right definition of SAP SRM 5.0 for Solution Manager Diagnostics?
    Thank you very much
    regards
    Thom

    Before you can move forward with SMD, you need to make sure the following components are working....
    1. SLD is running on Solution Manager and SMSY is able to read from it.
    2. The SCM system is registered with the SLD
    3. You created a landscape which has a leading role that correlates to the role for your SCM system in SMSY.
    4. You've installed the SMD agent on the CM system
    Please confirm that you have completed the above.

Maybe you are looking for

  • Anyway of determing which canon cameras use avi files for its video?

    my computer does not support mov files. it is vista software. i dont want to download conversion software for mov to avi. looking for a simple way of going thru canon's cameras to find the ones that uses avi.

  • Is there a bug affecting the app store in Mountain Lion?

    I upgraded yesterday to OS 10.8.2. The app store is unreachable because I don't have an internet connection, according to the app store panel; but internet is working fine for mail and browser. When I select "software update" in the apple menu, the a

  • Icon Composer Problem

    When I try to make grey/black icons, Icon Composer think theres nothing there and puts nothing in the box when I drag the image in. Any way to fix this/ any other program like Icon Composer?

  • GuiXT - Usage

    Hi all, Somebody please give a link of a documentation to GUIXT and its usage. Thanks aRs

  • Feedback: technical style for unit preferences

    in Preferences>Units & Rulers, simply write a unit label in terms of singular rather than plural. with reference to technical styles for writing units, a unit label of 'mm' for millimeter is clear and usable. likewise for a unit label of 'cm' for cen