MM consigment stock : how to do statistical GR
dear all
we are in the process of prototyping an MM consigment route. we have done the following
1. Info record created with Info type as consigment
2. PO created with Item category as K
3. GR with Movement type 101 done with Category K
the part is shown as Vendor stock in K ( In mmbe)
for selling the same in SD route, i want that stock to be visible.
thus i need to do the statatistic GR after step 3
does any one has a solution for statistical GR
or does any one has a better solution ?
dear all
very sorry for the confusion
the company does not want to take it into its stock, but still sell the goods.
that is the key requirement
i heard that there is an statistical GR option will show the stock details but no liablitity is generated.
once i sell the goods thru SD route. i shall do the MRKO to generate the accounts paybale.
plz help me in understanding the statisticall GR part
rgds
Similar Messages
-
MM COnsigment stock: Unable to issue against reversation
dear all ,
we are trying to prototype a MM consigment stock process.
we have done the following
1. Purchase info record is created as consigment
2. PO is created. while creating the PO, the net price is coming as Zero.
3. Migo was possble with item category as K and movement type as 101
4. Created a reversation
5. finally tried to do a goods issue with special indicator as K
we are getting error PO has zero price.
we have tried all known settings and the net price in PO is still coming as zero.
kindly let us know where the issue could be . what setting need to be modified.
regardsDear Friend,
when the matl is in consignment sstores, it is not belongs to company. Vendor is the legal owner of the matls.
you have to transfer from consignment stores to company stock using 411-K mvt type( T-code= MB1B).
*you can not do two transactions at single shot( i.e. both transfer posting and issue a matl against Resevastion)*
In ur case upto 3rd step is OK.
then,
1.0 Transfer the matl to companys stock.
2.0 Create a reservation against a cost center.
3.0 issue a matl against ur reservation.
OR
**u can issue a matl directly to cost center using mvt 201-K in T- code= MB1A.**
*By that time if u see the matl do. u wil see that stock changes from 101(K-) to 201(K+), but can not issue against reservation*
It will solve ur problem.
If u have any doubts, plse revert back.
Reward if useful.
Regards
Viru -
The key J is stock, how do I fix it please
Hi, this morning the key J is a bit stock, how can I repair it please?
Thanx
HugoAny spills?
Is the Speech System Preference turned on?
Is your keyboard repeat System Preference turned on? -
How to create statistical graph?
Could any of you give me some suggestion on how to create statistical graph (line)?
Is there any documentation or reference about this?
Thank you so much for your help.I would like to create a chart using swing.
The chart is a line plot and it should be able to be printed.
Could you give me some suggestion?
Thank you very much. -
Hi guys,
I have a problem with MRKO for Consigment Stock.Some of the materias come with zero price(it is actually no price at all sap dont see it as a zero ) after i try to settle the consigment SAP automaticaly rejects these materials.
That error occurs to a random type of consigment materials that previously had no problems.
All the materials even one with the zero prices are done with moving type 261 K
Please HelpI'll check the info record but i doubt its from that because we have 20 EA a material 2 EA are with zero price and the other 18 are fine.This thing occurs every month with different materials.
Other thing i noticed is that all the documents with zero price materials are created by one and the same user.I suspect that user is not correctly moving the material. -
Report Painter - How to identity statistical orders in a Cost Center Report
Hello,
currently I am in the process of building a cost center report based on reporting tabel CCSS.
This report should list all primary and secondary costs which are charged to a specific cost center/cost center group .
The cost center or cost center group is given in the general data selection.
All direct primary cost postings are identified in rows like this:
- Cost Element (SET): cost element group A1, A2,...Axx
- Business Transaction Type: COIN
All primary cost postings deriving from (real) internal orders are identified like this:
- Cost Element: 1 to 9999999999
- Business Transaction: KOAO
- Partner object number: 0 to 99999999
Now here is the problem:
The controlling department requests to identify all primary cost postings to the given cost center which have been postet to a statistical internal order at the same time. The most part of the primary costs have been directly postet to the cost center in the Additioanal Account Assignments. But some have been posted to the cost center and at the same time to a statistical internal order.
Looking into BSEG I can quickly identify these line items as they have a value in BSEG-KOSTL and BSEG-AUFNR.
How can I select these items in a report painter report?
I would like to separate all items whith connection to statistical int. orders from those with no connection to internal ordes.
Thanks for your help!Dear Elli,
Dear SAP-Gurus,
once again, thank you for your quick reply.
You hints and remarks are very much appeciated.
My problem seems to be slightly more complicated than what I had expected.
All postings to the cost center/cost center group are actual postings. The cost center is the "real" cost element, there are no postings of value type 11 here.
Most postings have the cost center as the only cost element, but others additionally mention a statistical order.
My goal is to seperate those postings to the cost center [as (real) cost element] plus the statistical order from those with only the cost center.
I would also like to sort these postings by the order number.
I could easily write two reports:
One for the cost center and another one only for the statistical orders. The latter would use value type parameter 11 (as you proposed!). Unfortunately, I do not know all order numbers tied to the cost center. As table BSEG is not suitable for SAP Query, I run into deep problems here.
I know I have problem in the design of my report here and I would like to sort out, which options I have.
Is Report Painter a suitable tool for me here anyway?
Thanks again!
Karsten -
How to Generate Statistic Graph in Report??
Hi, i am developing an questionnaire program together with 19 question... i am able to get value for each value..
Now my problem is how to generate a statistic graph whenever user can check their report ??
Can anyone help?? Thank you very much......
from bscsThe easy way is to use your values to set the width or height of an image dynamically in HTML, but you can only do bar charts using this method.
For real reports and measures have a look at
http://www.jfree.org/jfreechart/index.php
http://www.jfree.org/jfreereport/index.php -
How to set Statistical wbs element?
hi,everyone. i'm a green hand in PS.
i know Statistical wbs element is different from normal wbs element from you guys.
but i don't know how to set a Statistical wbs element, i mean how to make a normal wbs element become a Statistical wbs element?
regards,
tiger wuYes, if you choose this (in which the Statistical check box is ticked) to create a project, all the WBS will be statistical.
To create a project in which some of the WBS are statistical and some are not, you don't need to configure this (check Box) in Project profile. You can create a project (CJ20N) and for WBS elements on control tab, you can check this or leave it.
Hope it helps.
Arya
Edited by: Arya Singh on Aug 30, 2008 8:09 PM -
Critical items on stock, how do i prevent running low ?
We have a few critical items on stock with unreliable replenish time.
Today i have reorder point at 2 and fixed lot at 4, how do i change this so that every time we take one out of stock one new will be reordered ?
These are expensive items so i want to plan it to minimize stock but still have a safe level, my goal is to have 4 onstock at all times, and never exceed 4.
Sorry if this is the wrong forum to post in, i'm new to sap and this forum
Regards,
DerlienHi,
I think in this case you should not use the reorder type planning.
You should maintain
MRP type PD
Lot size EX
safety stock 4.
Maximum lot size 4
Minimum lot size 1
Whenever you would consume this part and the stock would go down automatically system will plan for that.
I hope it solve your problem.
Regards
Vivek -
MM Consigment stock : Need to sell without getting into stock
dear all
we have a unique problem.
we have done the following
1. created inforecord for vendor the type consigment
2. PO created with type K
3. GR done with 101 with Type K ( the stock is Vendor stock)
we need to sell that product without getting our stock
is this advisable.
is this possible.
as per our requirement, the stock should not be taken inside the plant.
regardsyou can sell directly from vendor consignment stock.
1) config the stock determination (MM -> Inv. Mgmnt -> stk detem). define you want to issue own stock first or consignment first.
2) maintain the material master with the stock determination group accordingly
3) create consignment info. record and price
create sales order, doing pick for outbound. system will use 601K movement type.
after PGI. it debit GR/IR a/c and credit COGS a/c
in this case, the material cost is not hitting your inventory a/c at all.
regards
Matthew -
How to move statistical postings to the regular section of Cost Ctr
Hi All,
Can any one, please, tell how can I move postings from the statistical section to the regular section of a Cost Ctr? I am talking about cost ctr report S_ALR_87013620 where we have two sections, one for the regular and other for the statistical section. We have some postings gone to the Statistical section incorrectly. Now we want to move them to the Regular section.Hi,
As Suraj has rightly said, the real posting would have gone to some internal order and hence a statistical posting to the cost center.
As far as I understand, you can not transfer a posting from statistical to real section within a cost center.
Please note that postings, statistical or real, will be available in cost center report. But you can not distribute or assess statistically posted costs to other cost centers.
I suggest you to check the accounting documents through the document environment to identify other accounting documents and to know where the real posting has gone. Then if required, you can process your future postings with real postings to cost center.
As far as the present postings are concerned, the only way is to reverse the relevant financial accounting documents, if small in number, and post with account assignment as cost center (ensure that it will be a real posting).
Hope the above will be of use to you.
Cheers. -
Stocks: How to add Dow Jones Index?
This is quite strange.
After clicking the + sign and typing 'dow' in Yahoo Finance, there isn't a listing for the Dow Jones Index. The closest is the Industrial Average.
How do I add it?Stewie Grif.,
The iPhone gets the stock information from Yahoo's data feeds. If you are in doubt what symbol to use for an index or a specific fund, searching for it on Yahoo Finance will give you the symbol to use.
Hope this helps,
Nathan C. -
Iphone4 screen shows a summary of weather and stocks how do I turn on?
Sometimes the scren shows a summary of multiple apps like local weather and stocks scroll at the bottom of the screen. This happens randomly. How can I "turn on" this effect. To turn it off I click the bottom button.
Swipe from the top of your screen down...Settings>Notifications>In Notification Center...adjust here.
-
How to exclude statistic using Data Pump API?
How to exclude all statistics while exporting data using Oracle Data Pump API (DBMS_DATAPUMP package)?
You would call the metadata filter api like this:
dbms_datapump.METADATA_FILTER(
handle = your_handle_here,
name = 'EXCLUDE_PATH_LIST',
value = 'STATISTICS');
Hope this helps.
Dean -
How to clear Statistical Postings from Cost Center
Hi All,
Is there a way to clear the statistical postings from the cost center it has been incorrectly posted to and be moved to the correct cost center?
I think there is a way to do it by making debit and credit entries to the G/L account where the postings initiated, but I am not sure about the whole process.
Any help is appreciated.Hi Pradeep,
I think u can use T.code KB15N for the issue ur facing.
Regards,
Shivguru Prasad
Maybe you are looking for
-
I just bought a new Ipod ios from a friend and she didn't reset it before she gave it to me and when I try to connect it to my laptop it keeps saying "Ipod is disable, connect to itunes"and it says to put in the correct passcode but I don't know what
-
Lightbox Gallery: Can larger photos fit to screen height?
I am using the lightbox from the Dreamweaver Widget Browser. Example: http://www.gulfwebservices.com/klb/portfolio/caloosa/ Currently, the photos are very large. I have made them so large because I would like each photo to fit the height of each user
-
NOW after my final cut pro x lost all of my work, now it won't open at all! What is happening here? Good thing this is only a trial because all these errors are making me NOT want to buy this software.
-
HT4623 Need to remove Candy Crush from Iphone
Trying to remove Candy Crush and other King games from Iphone3 but can't figure out how to do it. After the apps jiggle, there is no "x" in the app to delete. Can anybody tell me how to get rid of unwanted apps?
-
How accurate a trim can you do on an M2V file?
Needed to make a change to the beginning of a 30 minute video. Did not want to encode the whole thing again. Imported new open (as M2v) into Encore and placed at head of timeline. Can't trim video to the frame where I want clip to end - smallest imcr