MM - Daily Report of the materials received from other plants

Hello
I want  the daily report of all the materials received from other plants i,e by stock transfer. Is there any way to get this information from the standard reports
regards
Ravi Pal

Dear Prashant
i checked with this transaction but the problem is that this gived the report for only the GR taken against STO with SD Delivery i,e with or with out billing. the system is not picking the STO with MM delivery whan we enter the supplyiny plant as u said
pl check this
thnaks
regards
ravi pal

Similar Messages

  • Good receipt for job work from other plant

    Dear Experts:
    1.Material Received from Other Plant for job work with challan and how to bring the Material into Stock at receiving plant.
    The same material stock number available in this plant also.
    Regards,
    Sridhar.N

    Hi,
    You could use serial number concept or bacth managment here to separate within the material code.
    Regards

  • SSRS in SharePoint2013:Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModule

    SSRS in SharePoint2013: There is a report in SharePoint and it contains a sub-report and the sub-report hyperlink. When I click the hyperlink to go to the sub-report, after >10min, I click the "Back to.." button
    on IE to go to the previous page. Then it catch the error as:
    Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled.
    Details: Error parsing near '
    <!DOCTYPE html PUB'.
    I am using SQL2012 and Sharpoint2013.

    Hi Alisa,
    Thanks for your reply, I changed the web.config, but the issue did not resolved. 
    I add the codes in two parts of the web.config as below, you can find in by keywords “aspnet:MaxHttpCollectionKeys”
    This issue can not reproduce on Chrome only occur on IE.
    So, do you have some details suggestion for me to fix it?
    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <configuration>
    <configSections>
    <sectionGroup name="SharePoint">
    </sectionGroup>
    <location path="_layouts/15/TA_AppMonitoringDetails.aspx">
    <appSettings>
    <add key="ChartImageHandler" value="storage=memory;timeout=20" />
    </appSettings>
    </location>
    <location path="_layouts/15/ReportServer/RSViewerPage.aspx">
    <appSettings>
    <add key="aspnet:MaxHttpCollectionKeys" value="10000" />
    </appSettings>
    </location>
    <system.net>
    <defaultProxy />
    </system.net>
    <appSettings>
    <add key="aspnet:MaxHttpCollectionKeys" value="10000" />
    <add key="aspnet:RestrictXmlControls" value="true" />
    <add key="FeedCacheTime" value="300" />
    <add key="FeedPageUrl" value="/_layouts/15/feed.aspx?" />
    <add key="FeedXsl1" value="/Style Library/Xsl Style Sheets/Rss.xsl" />
    <add key="ReportViewerMessages" value="Microsoft.SharePoint.Portal.Analytics.UI.ReportViewerMessages, Microsoft.SharePoint.Portal, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
    </appSettings>

  • In CS6 my created and then saved jpegs do not have the same icon as jpegs I receive from others. Whe

    In CS6 my created and then saved jpegs do not have the same icon as jpegs I receive from others. When attached to email they don't actually attach but appear embedded in the email and vertically squished. Any ideas?

    It could be as simple as having two different file extentions jpg vs jpeg. As for the emails, that may depend on how you are attaching them to the email.
    In most email programs you can open a new document then choose file attach or file import. Former would be attachments or links and the latter would be embedded.
    On windows systems you can also send images to the email app, in the explorer right clicking and sending would open a small app that will resize the image to reduce the file size. This app could in theory squish the image.

  • How to submit a report ,Passing the internal tables from parent report

    How to submit a report ,Passing the internal tables from the parent report ?

    The SUBMIT statement executes a report from within a report. i.e. you could have a drill-down which
    calls another report. Can only execute reports of type '1'.
    *Code used to execute a report
    SUBMIT Zreport.
    *Code used to populate 'select-options' & execute report
    DATA: seltab type table of rsparams,
          seltab_wa like line of seltab.
      seltab_wa-selname = 'PNPPERNR'.
      seltab_wa-sign    = 'I'.
      seltab_wa-option  = 'EQ'.
    load each personnel number accessed from the structure into
    parameters to be used in the report
      loop at pnppernr.
        seltab_wa-low = pnppernr-low.
        append seltab_wa to seltab.
      endloop.
      SUBMIT zreport with selection-table seltab
                                    via selection-screen.
    *Code used to populate 'parameters' & execute report
    SUBMIT zreport with p_param1 = 'value'
                    with p_param2 = 'value'.
    Other additions for SUBMIT
    *Submit report and return to current program afterwards
    SUBMIT zreport AND RETURN.
    *Submit report via its own selection screen
    SUBMIT zreport VIA SELECTION-SCREEN.
    *Submit report using selection screen variant
    SUBMIT zreport USING SELECTION-SET 'VARIANT1'.
    *Submit report but export resultant list to memory, rather than
    *it being displayed on screen
    SUBMIT zreport EXPORTING LIST TO MEMORY.
    Once report has finished and control has returned to calling
    program, use function modules LIST_FROM_MEMORY, WRITE_LIST and
    DISPLAY_LIST to retrieve and display report.
    *Example Code (Retrieving list from memory)
    DATA  BEGIN OF itab_list OCCURS 0.
            INCLUDE STRUCTURE abaplist.
    DATA  END OF itab_list.
    DATA: BEGIN OF vlist OCCURS 0,
            filler1(01)   TYPE c,
            field1(06)    TYPE c,
            filler(08)    TYPE c,
            field2(10)    TYPE c,
            filler3(01)   TYPE c,
            field3(10)    TYPE c,
            filler4(01)   TYPE c,
            field4(3)     TYPE c,
            filler5(02)   TYPE c,
            field5(15)    TYPE c,
            filler6(02)   TYPE c,
            field6(30)    TYPE c,
            filler7(43)   TYPE c,
            field7(10)    TYPE c,
          END OF vlist.
    SUBMIT zreport EXPORTING LIST TO MEMORY.
    CALL FUNCTION 'LIST_FROM_MEMORY'
      TABLES
        listobject = itab_list
      EXCEPTIONS
        not_found  = 4
        OTHERS     = 8.
    CALL FUNCTION 'LIST_TO_ASCI'
      EXPORTING
        list_index         = -1
      TABLES
        listasci           = vlist
        listobject         = itab_list
      EXCEPTIONS
        empty_list         = 1
        list_index_invalid = 2
        OTHERS             = 3.
    IF sy-subrc NE '0'.
      WRITE:/ 'LIST_TO_ASCI error !! ', sy-subrc.
    ENDIF.
    Submit report as job
    *Submit report as job(i.e. in background)
    data: jobname like tbtcjob-jobname value
                                 ' TRANSFER TRANSLATION'.
    data: jobcount like tbtcjob-jobcount,
          host like msxxlist-host.
    data: begin of starttime.
            include structure tbtcstrt.
    data: end of starttime.
    data: starttimeimmediate like btch0000-char1.
    Job open
      call function 'JOB_OPEN'
           exporting
                delanfrep        = ' '
                jobgroup         = ' '
                jobname          = jobname
                sdlstrtdt        = sy-datum
                sdlstrttm        = sy-uzeit
           importing
                jobcount         = jobcount
           exceptions
                cant_create_job  = 01
                invalid_job_data = 02
                jobname_missing  = 03.
      if sy-subrc ne 0.
                                           "error processing
      endif.
    Insert process into job
    SUBMIT zreport and return
                    with p_param1 = 'value'
                    with p_param2 = 'value'
                    user sy-uname
                    via job jobname
                    number jobcount.
      if sy-subrc > 0.
                                           "error processing
      endif.
    Close job
      starttime-sdlstrtdt = sy-datum + 1.
      starttime-sdlstrttm = '220000'.
      call function 'JOB_CLOSE'
           exporting
                event_id             = starttime-eventid
                event_param          = starttime-eventparm
                event_periodic       = starttime-periodic
                jobcount             = jobcount
                jobname              = jobname
                laststrtdt           = starttime-laststrtdt
                laststrttm           = starttime-laststrttm
                prddays              = 1
                prdhours             = 0
                prdmins              = 0
                prdmonths            = 0
                prdweeks             = 0
                sdlstrtdt            = starttime-sdlstrtdt
                sdlstrttm            = starttime-sdlstrttm
                strtimmed            = starttimeimmediate
                targetsystem         = host
           exceptions
                cant_start_immediate = 01
                invalid_startdate    = 02
                jobname_missing      = 03
                job_close_failed     = 04
                job_nosteps          = 05
                job_notex            = 06
                lock_failed          = 07
                others               = 99.
      if sy-subrc eq 0.
                                           "error processing
      endif.

  • NewLine Character in the String received from Interactive Adobe Form

    Hello Experts,
    Following is the issue we have with interactive Adobe Form
    We have a text area within the form. User enters the text in multiple lines in this text area.
    We are calling a backend function module designed in SE37 that accepts and process the data from the adobe form.  We are also processing the string data user enters in the text area.
    When we receive the string from the form, the newline character within the string is displayed as '#' in the debugger. We tried splitting this string using cl_abap_char_utilities=>newline and cl_abap_char_utilities=>cr_lf  but NO luck. Though in the debugger we see cl_abap_char_utilities=>newline  as '#'  in the debugger and also '#' is present within the string, for some reason when string is processed to find cl_abap_char_utilities=>newline, we can find/locate it.
    Because ABAP code is not able to identify the newline character within the string received from Adobe form, we are not able to maintain the formatting of the string as it was entered in the form.
    Any help to resolve this issue is appreciated.
    Thanks in Advance.
    Regards,
    Bhushan

    Hi Bhushan,
    I was going through your issue, and I feel this is something you can do with scripting. Basically you should read whole string and find the new line character and replace with a space or comma, as per your requirment.
    Do like following:
    In the exit event of the field select java script and write following code:
    var strng = this.rawValue;
    strng.replace(/\n/g, " ");
    above im reaplcing new line with a space.
    I think it should work I have not tested it. Pls update if you test it .
    Regards,
    Ravi.D

  • The Data Received from the server running AD RMS didn't match the expected format.contact your system administrator for further investigation.

    Hi All,
       We Have implemented AD RMS in our organisation recently.But the Problem we are facing here many users those are Ms office 2013 we will get the error"The Data Received from the server running AD RMS didn't match the expected format.contact
    your system administrator for further investigation." and those who are in Ms office 2010 Professional it says  
        "The service is Temporally unavailable.Ensure the you have   connectivity to this server.This error could be caused if you are working offline.Proxy setting are preventing your connection or intermittent network issue."
      Below are the workaround did,
    1.Able to reach to Our pipeline ADRMS cluster.
    2.We have a valid Certificate.
    3.if we type https://adrms.ourdomain.com its working fine.
    4.Manually put the registry setting for effected computers.
    5. Applied the Hotfixes:MicrosoftFixit50903,KB2627273.
       Kindly help or suggest us to resolve the above issue as many computers in domain are not working with IRM.
    Thanks and reqard,
    Mohammed Siddiq.

    Hi Mohammed,
    Were you able to fix the issue with CRL disablement?
    Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

  • My employer and I both have iPhone 5.  We both recently updated as recommended.  Now we can no longer text each other.  I can text and receive from other iPhone users.  Any ideas??

    My employer and I both have iPhone 5.  We both recently updated as recommended.  Now we can no longer text each other.  I can text and receive from other iPhone users.  Any ideas??

    Well, that didn't work since I am already using my appleID for both FaceTime and iMessage but i did see the option to send as SMS when iMessage not available.  so I am now able to send to him  but I don't know if he can send to me.  It's a start.  It is only with his phone.  His wife has a Galaxy and they are both on AT&T and she can send and receive.  I am on sprint.  If that info helps

  • On my iPad I can only send email and messages to apple products.how can I send and receive from other devices other than Apple?

    On my iPad I can only send email and messages to apple products.how can I send and receive from other devices other than Apple?

    Vallakat wrote:
    On my iPad I can only send email and messages to apple products.
    There is a huge difference between sending email and sending messages.
    Yes, I believe you when you say you can only send messages to other Apple products.  The iPad is not a telephone, and therefore, it cannot text message.  It can only iMessage, which means it can send and receive messages to/from other Apple products if they are on WiFi or an iMessage capable cellular network.
    Email, however, is a whole different category.  I don't really think you can only exchange email with other Apple products only.  Make sure you have correctly identified the symptoms.

  • Using the Import utility from other users and going to a different schema

    I has a user today with rights
    Insert into XXXX.TABLE values(); Works just fine for another schema's table which has select,insert,update,delete.
    We tried to utiile the import utility from OTHER USERS
    Insert failed ORA-00942
    Do you want ot ignore all errors
    Even though we have rights to the schema under OTHER USERS.
    When connected as the owner it works fine.

    I've be trying to find a work-around to this issue & found this old post -- I'm having the same problem.
    I'm using Oracle 11g and SD 2.1.1.64.
    I have user A with a table that grants select,insert,update, and delete privs to user B. Logging into user B I, of course, can do inserts, deletes, etc. on the the table in user A's schema.
    When I use the import data feature to load data from a CSV file I can't get it to work while logged into user B. It does work fine if logged into user A. It looks like the issue may be that it doesn't put the schema prefix of "A." on the insert statements.
    Has anyone found a way to get around this issue yet?

  • Withdrawal from other plant- sales

    Hi dudes,
    suppose if i am using 70  special proc. key for semifinished materials and are planned in other plant gets consumed for FERT materials order in the main plant.
    suppose if i maintain the sales views for these semifinshed materilas in the main plant and can i do the PGI for sales order from other plant to main plant where the sales procesing is happening.
    thanks in advance
    Robert

    Special procurment key 70 is reservation from FERT plant to the supplyiong plant.
    Against this reservation you need to issue the material? Is it your scenario?
    As I know the material will be withdrawn duting backflush from the supplying plant directly
    If you want to sell the raw material from supplying plant to production plant, then you need to set up STO, in OMGN.
    Since usually we use it for inter company tranfer and billing, I am not sure whether you can do it for the plants with in the same company code.

  • PR should generated from only centralized plant not from other plants

    Hi Friends ,
    I am having 5 plants.
    Plant- A , B, C, D, E, F
    A is the centralized purchasing plant.
    Others are manufacturing and sales plant.
    So all my Purchase requisitions should be generated by plant A only. (Not from other plants) How can I make this?
    Regards,
    Mahesh.

    You can restrict PR creation in other plants by using authorisation object M_BANF_WRK.
    Activate this object via SU24 for transactions ME51 or ME51N and then create a role in PFCG with this object or add this object in your existing roles and then assign users to this role.
    Keep in mind do not link plants to this role which you dont want to used for PR.
    Hope this clears you.
    Njoy SAP...

  • Why were no attributes in the Error received from Adapter Framework (AF)?

    Hi All,
    We have a local processing scenario where we use the Integration Configuration through Advanced Adapter Engine to download attachment using Sender Mail Adapter from Lotus Notes Mail and Upload the file attachment into an FTP using Receiver File Adapter. As part of our testing we deliberately set the Sender Mail Adapter to produce error by changing the configuration like setting a wrong URL to simulate downtime on Lotus Notes.  The error shows up in the RWB CommChannel and an error record is received from AF to send Alert.  When the alert tries to find the alert rule it is unable to do so because the condition (Component, Interface and Namespace) values are empty "*Find rule for (From:::: To::::)" This is from the report SXMSALERT_LOGREADER.
    The (From:::: To::::) should contain the Sender Component, Interface and Namespace as FROM, and Receiver Component, Interface and Namespace as TO but they are not picked up from the Mail Adapter because there are no message/payload yet but I am expecting at least the Component to be included.
    The result of the empty (From:::: To::::) will be a "*No matching rule found" and no alert is sent.
    Do anyone had the same issue?  Is this a possible bug in PI?
    Please let me know if you need additional detail.
    Regards,
    Orlando

    Hi Orlando,
    When the sender channel reads any message, it would be able to determine the Sender service, Interface and namespace from Sender agreement. It is not dependent on the payload.
    To generate the alert for such, you can modify the alert rule to check only for the Sender serice, interface and namespace.
    Hope this helps.
    Regards,
    Sanjeev.

  • Capturing the response received from the WCF web service method?

    Hi,
    I am trying to call a WCF web service method with input parameters in an xml file and then receive the returned output data by the web service as response into an xml file.
    So far I am able to call the webservice method successfully and not sure how to capture the response data. I am able to see the response data in the tracked message event using the query expression search at the BizTalk group root.
    I may be missing something simple in my orchestration(image at http://social.msdn.microsoft.com/Forums/getfile/535971)  ?
    Steps in my orchestration are,
    1) Receive the xml file with input parameters
    2) Send to webservice using WCF-BasicHttp transport type
    3) Receive response from web service
    4) Send to xml file
    Not sure how I can have 2 receive shapes in series there. I have seen few related posts in the forum but could not resolve.
    Could someone please correct me?

    Hi Rachit,
    Thanks for your quick response. My orchestration is similar to the one in that post. In your post at step 7, how you are able to set 'Activate property' of the receive shape to true? as its the 2nd receive shape in series.
    I am unable to post any images or links at the moment. My orchestration is posted at this link  http://social.msdn.microsoft.com/Forums/getfile/535971
    I am able to access  the above link using chrome.
    Yes,  I did use the Request/Response port to communicate with the web service.  I
    am looking to achieve similar to the one in your post.
    Thanks.

  • Filling In PDF's received from other customers?

    I paid for this subscription thinking it would allow me to change/Fill In PDF's that receive from our vendors...How Can this be done?

    Hi,
    What service did you subscribe to?
    What type of forms does your vendor provide? Word files or PDF forms?
    If the forms are fillable PDFs forms, you can use the free Reader to fill them in. You can import them into FormsCentral for editing.
    If you want to edit a flat PDF form (one that doesn't have interactive fields) or convert a standard PDF into a fillable form, you can use Acrobat XI or the subsciption version, Acrobat Plus.
    Let me know a bit more about the type of forms you want to change and fill in.
    Thanks,
    Priscilla

Maybe you are looking for