MM Doc no. and corresponding OD no. vice varsa

Dear experts,
Please help. i need to know OD - Outbound Delivery No. and related MM doc number ( movement type 601) from the table.
What is the table name .. is there any std. T-code for that?
Kindly help.
Thank you.
Best regards,
Zusen

Hi,
You can achieve this one by two ways.
1. Table : MSEG
    Give PO / Contract number and Document year in the selection screen & Execute.
    System will display all the linked documents ( Material documents & Outbound delivery (OD) documents).
    Because all these documents are linked by the PO/Contract number.
2. Table EKBE
   Give PO / Contract number in the selection screen & Execute
    System will display all the linked documents ( Material documents & Outbound delivery (OD) documents).
    Because all these documents are linked by the PO/Contract number.
In this manner you will get material document number fillowed by the Outbound delivery (OD) document based on the PO / Contract number.
Regards
KRK

Similar Messages

  • Understanding compile errors due to copying code from a doc file and not a txt file

    SITUATION:
    My instructor for my micro-controller class refuses to save sample code to a text file and instead saves it to a word document file instead. When I open up the doc file and copy/paste the code into my IDE "CodeWarrior" it causes errors upon compile time.
    I am having to rewrite all the code into a text editor and then copy/paste it into my IDE.
    MY UNDERSTANDING:
    I was told to always save code as a text file because when you save code as a word document file it will bring in unwanted characters when your copy/pasting the code into your IDE for compiling.
    Their are students in my class using the schools computers running "Windows" that copied and pasted the code into CodeWarrior and it compiled fine. This is not only frustrating but confusing. However, I know their are students in class with "PC's" running windows that had the same trouble I did so I know it's not a Mac issue. 
    Also I am running "Parallels" because my IDE for this micro-controller "Code Warrior" is not avaiable for my OS. I realize there are several IDE's out there that require "Windows OS" in general but I know this situation is not a Mac issue or Parallels issue or even a Windows issue. It's purly an issue of formatting that is done between the file being copied and the target program or so I'm understanding.
    Can someone exlain to me in better words or perhaps provide a resource, documentation or article that will enlighten me on this issue. I would like to better state my case next time. I'm tired of being told this is a MAC issue and that Windows is just plain better.

    The problem is (as you suggest) almost certainly a gremlin issue - characters that for one reason or another Code Warrior cannot interpret correctly. Why it happens to you and not others is a different matter. That could mean that the pofessor uses fonts that are not on your machine, or that he is using a different version of word, or it could be in how you access the data. For instance, if the prof posts this word doc on the web you may get different results if you download the file and open it in Word as opposed to opening it directly from a web browser.
    The sure-fire solution is to download TextWrangler and copy the code in there first. TW has a number of tools for finding and removing unpleasant characters. it adds a step, but... you could also try resaving the doc file as a plain text file from within word.

  • How do I write a javascript code to open InDesign File, import Doc, save and export to pdf?

    How do I write a javascript code to open InDesign File, import Doc, save and export to pdf?

    Hi hasvi,
    Need Template(.indt), textframes etc for the following script:
    var myFolderInd = Folder.selectDialog();
    var myFile = myFolderInd.getFiles("*indt");
    app.open(myFile)
    var myDoc = app.activeDocument;
    var myDocName = myDoc.name;
    var mySaveFile = app.activeDocument.save(myFolderInd.fsName + "/" + myDocName.split(".indt").join(".indd"));
    var myFolderDoc = Folder.selectDialog();
    var myFile1 = myFolderDoc.getFiles("*doc");
    mySaveFile.pages[0].textFrames[0].place(File(myFile1))
    //~ mySaveFile.place(File(myFile1))
    app.activeDocument.textPreferences.smartTextReflow = true;
    var myPDFFile = new File(mySaveFile.filePath + "/" + mySaveFile.name.split(".indd").join(".pdf"))
    myDoc.exportFile(ExportFormat.PDF_TYPE, File("~/Desktop/abc.pdf"));
    alert("Process Completed")
    Regards
    Siraj

  • Read a doc file and write back to a doc file

    How to read line by line from a doc file and then arrange it.
    Like-->
    amit
    sumit
    prem
    jeev
    these four names are present in the doc file. Now how to read by means of java program and sort these names and write back to a new doc file?????
    What packages and methods are to be used??
    Please help.....
    Edited by: Jaguar on Apr 11, 2011 12:16 AM

    Jaguar wrote:
    How to read line by line from a doc file and then arrange it.By 'doc' do you mean MS Word?
    these four names are present in the doc file. Now how to read by means of java program and sort these names and write back to a new doc file?????You seem to have a sticky '?' key and an unreliable shift key (to apply an upper case letter to the start of every sentence). Please fix them.

  • BAPI to update PO's and Corresponding line items numbers **URGENT**

    Hi All,
    I have a requirement to create a program which will take list of POs and corresponding line item number and update Final invoice indicator for the same. This should be updated in SRM as well as R/3.
    I think, it can be done by a BAPI. Do anyone have idea, which BAPI will be applicable for the same?? You can also share yours views on this.
    Regards,
    Parvez.

    Hi
    We have done this.. This is easily possible using BAPIs.
    Try using SRM BAPIs
    META_PO_GETLIST
    META_PO_GETDETAIL
    <u>Note - SRM system calls BAPI in R/3 backend using RFC Call</u>
    In R/3 backend
    BAPI_PO_CREATE1
    BAPI_PO_CREATE
    BAPI_PO_CHANGE
    Hope this will definitely help.
    Regards
    - Atul

  • Is there any way to add PO no and  corresponding line item of PO in VL32N?

    Hello,
    The scenario is, we have created the IBD and deleted one of the line item and saved it.
    We went to VL32N and added the missing line item to IBD but PO number and corresponding item number of PO field of newly added line items are grayed out. We are not able to add PO number in VL32N screen.
    Is there any way to add PO number and corresponding line item of PO in VL32N screen of IBD? Our client does not want to create new IBD for same PO. He wants to add the line item in same IBD.
    Thanks,
    Milind
    Edited by: Csaba Szommer on Aug 27, 2011 4:52 PM

    Hello,
    This thread is pending since long time. No body has answered my question. Can any body suggest me?
    Thanks
    Milind

  • I saved a Pages doc yesterday and today I can't open it because I get a message that the doc is missing an index.xml file. Help!

    I saved a Pages doc yesterday and today I can't open it because I get a message that says "can't open doc because an index.xml file is missing."  Help!

    Pages v5 documents do not have an internal index.xml file. When you attempt to open one of these with the older Pages '09, you will get that dialog. Double-click the document icon, or right-click, and open with Pages v5 to access the document contents.

  • Initially I had downloaded Document 2 (Free) application to view my doc, ppt and xls files. I was not able to edit the files so there was an option for upgrade the Document-2 free to paid version. I have upgraded the Document 2 application.

    Initially I had downloaded Document 2 (Free) application to view my doc, ppt and xls files. I was not able to edit the files so there was an option for upgrade the Document-2 free to paid version. I have upgraded the Document 2 application. But on my iPad now there are to application present Docemnt-2 (Free) and Document-2. I am not able to open any existing document using the upgraded version of application. How do I connect all the existing txt,PPT,XLS doccument to the new upgraded Document-2 application and then to edit it on my iPad.

    As suggested I had deleted the free application and did a hard restart the iPad. I have again copied the document using iTunes. But I am not able to edit any document using this app. Document 2 (paid version) supports editing features of the txt/ xls /ppt files. Is there any problem while loading the Document 2 app. If I reload then do I need to purchase again?

  • HT1692 not able to sync exchange calendar events on iPad made from my computer or iPhone. It works fine when I make an event from iPad, it shows on computer and iPhone but not vice-versa.

    I have an iPhone, Ipad and a Laptop. They all are configured to company's exch.I am not able to sync calendar events on iPad made from my computer or iPhone. It works fine when I make an event from iPad, it shows on computer and iPhone but not vice-versa.

    -Me again - it also won't upload the few new pictures I have on the computer onto the iPad without deleting all the photos that are already there....

  • How2specify Amount in Doc Currency and Amnt in LOCL Curr4same item in FBB1?

    Hi Experts,
    I need to specify some amount (say, 100) in doc currency and some amount(say, 70) in Local currency for the same line item(say, 0001) of a acct doc in FBB1 transaction........so, let me know that, How proceed in FBB1 tx to meet above requirement? I mean, navigation......because, I hv FBB1 tx input screen, MENU, push buttons, but i did not find any such input fields!! if this is not supports, then Wht is the other tx to meet my requirememt?
    thanq

    ur correct......thats why am struggling from yesterday that, I hv requiremet that, in the input file, both AMOUNTS are providing, i mean, amount in doc curency and amount in local currency for the same line item.......so, i need to upload this input file to SAP, inturn both amounts to the same line item.....they dont want calculate by the system, they want to hv it explicitly, i was used couple of FMs, no use!! u might hv seen my posts, INTERFACE_DOCUMENT also not meeting my requirement!!
    any clue? appreciated.

  • Doc splitting and new Gl a/c

    Hi All,
    can any one tell me the difference between doc splitting and new gl concept. and explain me how will it useful in preparing profit center wise balance sheet.
    and pls explain me the configuration steps.
    Thanks In advance
    Sarayu

    Hi
    Document splitting enables a complex display of documents. Line items are split here for selected dimensions. This ensures that you can draw up complete financial statements for the selected dimensions at any time. Below example would further clear :-
    Suppose a vendor invoice containing the following items is entered:
    Posting Key Account Segment Amount
    31 Payable 100.00-
    40 Expense 0001 40.00
    40 Expense 0002 60.00
    Document splitting then creates the following document in the general ledger view:
    Posting Key Account Segment Amount
    31 Payable 0001 40.00-
    31 Payable 0002 60.00-
    40 Expense 0001 40.00
    40 Expense 0002 60.00
    Settings for Splitting are as follows :-
    In the IMG, choose Financial Accounting (New)->General Ledger Accounting (New)-> Business Transactions-> Document Splitting.
    1. Classify G/L Accounts for Document Splitting - You need to classify the individual document items so that the system knows how to handle them. You do this by assigning them to an item category. The item category is determined by the account number. In this IMG activity, you need to assign the appropriate accounts.
    2. Classify Document Types for Document Splitting - Every business transaction that is entered is analyzed during the document splitting process. In this process, the system determines which splitting rule is applied to the document. To enable the system to determine the splitting rule, you need to assign a business transaction variant to each document type.
    3. Define Zero-Balance Clearing Account - Here you define a clearing account for account assignment objects for which you want to have a zero balance setting when the balance is not zero.
    4. Define Document Splitting Characteristics for General Ledger Accounting - Here you specify to which document splitting characteristics document splitting applies, for example, profit center or segment. The characteristics that you specify should be maintained in at least one of your ledgers. You determine which characteristics are maintained in your ledger by assigning scenarios or customer fields to your ledgers.
    You also define how this characteristic is to be handled by specifying, for example, whether you want to apply a zero balance setting, whether the field is a required entry field, and the appropriate partner field.
    5. Define Document Splitting Characteristics for Controlling - Here you specify which additional characteristics you want to apply in document splitting. The additional characteristics are not relevant for General Ledger Accounting. Instead, they are relevant for components in Controlling that use documents transferred from General Ledger Accounting.
    6. Define Post-Capitalization of Cash Discount to Assets - Here you define whether the cash discount that is applied in the payment of an asset-relevant invoice should be capitalized to the asset. When you select this setting, the cash discount amount is not posted to the cash discount account in the payment document, but instead directly to the asset.
    7. Edit Constants for Nonassigned Processes - Here you define default account assignments (for example, a default segment) for specific line items in processes for which it is not possible to derive the correct account assignments at the time when the document is posted. This is the case if the required information is not yet available when the posting occurs.
    8. Activate Document Splitting - In this IMG activity, you activate document splitting. The splitting method used is that delivered by SAP as standard, which contains the splitting rules for the different business transactions. If this splitting method does not meet your requirements, you can first define and then select your own method in Customizing for document splitting (see the next step).
    Settings for Extended Document Splitting
    Here you define your own rules for document splitting and make the necessary settings so that the system applies the rules you defined and not the SAP standard rules.
    9. Define Splitting Method - Here you define your own method for document splitting. A splitting method contains the rules governing how the individual item categories are dealt with.
    10. Define Splitting Rule - Here you define the splitting rules for document splitting. You assign one or more business transaction variants, the account key for the zero balance setting, and the leading item categories for cross-company code transactions to a splitting method.
    11. Assign Splitting Method - Here you assign the splitting method to be used for document splitting after activation. If you want to activate your own splitting method, replace the standard method with your own method.
    12. Define Business Transaction Variants - Here you can define business transaction variants for the business transactions in document splitting.
    Regards,
    R.Ramakrishnaraj

  • Which table stored the Inbound ASN IDOC # and corresponding In.B Delivery#

    Hi,
    May i know which table stored the inbound ASN IDOC# and corresponding created Inbound Delivery number??
    Thanks!!

    Dear Hoo Laa,
    You may find the Sales Organisation/Distribution Channel details in PO itself (Shipping Tab). Table where you can get Sales Organisation/Disribution Channel is EKPV.
    Regards
    Samier Danish

  • Lost al .pages and .numbers docs , iphoto and office programs won't open after changing: auto startup in: startup with password. all personal settings are also gone

    After i changed this setting: autologin. into login with password i restarted the computer.
    it started up with a blank personal surrounding. also my .pages and .numbers documents were gone, personal settings gone, iphoto won't open and office programs wo'nt open.
    in finder i can find several .doc documents and i can see that all my pictures are still on the system, But i can't open them.
    i was so stupid not to use time machine. But is there way to recover the system with my documents or something??
    please help.
    System Imac i5 intel 21.5 inch
    Software  Mac OS X Lion 10.7.3 (11D50b)

    Nope, without any backup they're probably gone for good. If you want you can purchase some data recovery software such as Data Rescue. I hope this may be a lesson why it's critical to backup your system, Time Machine is a good place to start.
    BTW when posting please use proper grammar, it's difficult to read a post when no caps are used.
    Good luck!

  • I need to select and upload a image and corresponding url from an external website using file upload control in MVC4. Please help

    I need to select and upload a image and corresponding  url from an external website using file upload control in MVC4.
    Please help
    Latheesh K Contact No:+91-9747369936

    This forum supports .NET Framework setup.
    As your issue appears to have nothing to do with .NET Framework setup, please ask in the MVC forums for best support.
    http://forums.asp.net/1146.aspx/1?MVC

  • List of roles and corresponding transactions and infotypes

    Hi Friends,
    I want to prepare baseline list of roles and corresponding transactions and infotypes that we have access to in Production system. Please let me know easiest way.
    Thanks,
    Ankitha

    In [this thread|Security - HR Authorizations; you'll find a similar question and some suggestions. Once you've got your roles it should be fairly easy to determine which transactions are in them.
    Jurjen

Maybe you are looking for