MM Drill down on any line on the report ME2N the line defaults to item 10
We have recently upgraded to ECC 6.0 EHP5 .
When you drill down in ME2N on any line on the report, it takes you to the tab of line item 10 and not on the line
where drill down was initiated .
Thank you in advance .
was this different in your older release?
If you are sure it was, then you should open a call at SAP directly and ask for a fix.
I am on EHP4 and I get as well to the first item in a PO, whatever item I click in ME2N.
But I cannot remember that this was different in any release in the past.
Edited by: Jürgen L. on Feb 7, 2012 8:29 PM
Similar Messages
-
How we can drill-down, sorting, traffic lights, in ALV report
hi gurus ,
how we can drill-down, sorting, traffic lights, in ALV report .
please any one suggest that...
regards,
praveenCheck the sample code for drill-down, sorting, traffic lights, in ALV report.
REPORT YMS_COLOURALV NO STANDARD PAGE HEADING.
TYPE-POOLS: SLIS, ICON.
DATA: FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: BEGIN OF IMARA OCCURS 0,
LIGHT(4) TYPE C,
MATNR TYPE MARA-MATNR,
MTART TYPE MARA-MTART,
MAKTX TYPE MAKT-MAKTX,
COLOR_LINE(4) TYPE C,
TCOLOR TYPE SLIS_T_SPECIALCOL_ALV, "cell
END OF IMARA.
DATA: XCOLOR TYPE SLIS_SPECIALCOL_ALV.
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM WRITE_REPORT.
FORM GET_DATA.
WRITE ICON_GREEN_LIGHT AS ICON TO IMARA-LIGHT.
IMARA-MATNR = 'ABC'.
IMARA-MTART = 'ZCFG'.
IMARA-MAKTX = 'This is description for ABC'.
APPEND IMARA.
WRITE ICON_YELLOW_LIGHT AS ICON TO IMARA-LIGHT.
IMARA-MATNR = 'DEF'.
IMARA-MTART = 'ZCFG'.
IMARA-MAKTX = 'This is description for DEF'.
APPEND IMARA.
WRITE ICON_RED_LIGHT AS ICON TO IMARA-LIGHT.
IMARA-MATNR = 'GHI'.
IMARA-MTART = 'ZCFG'.
IMARA-MAKTX = 'This is description for GHI'.
APPEND IMARA.
LOOP AT IMARA.
IF SY-TABIX = 1.
IMARA-COLOR_LINE = 'C410'. " color line
ENDIF.
IF SY-TABIX = 2. " color CELL
CLEAR XCOLOR.
XCOLOR-FIELDNAME = 'MTART'.
XCOLOR-COLOR-COL = '3'.
XCOLOR-COLOR-INT = '1'. " Intensified on/off
XCOLOR-COLOR-INV = '0'.
APPEND XCOLOR TO IMARA-TCOLOR.
ENDIF.
MODIFY IMARA.
ENDLOOP.
ENDFORM. "get_data
FORM WRITE_REPORT.
DATA: LAYOUT TYPE SLIS_LAYOUT_ALV.
LAYOUT-COLTAB_FIELDNAME = 'TCOLOR'.
LAYOUT-INFO_FIELDNAME = 'COLOR_LINE'.
PERFORM BUILD_FIELD_CATALOG.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FIELDCAT
TABLES
T_OUTTAB = IMARA.
ENDFORM. "write_report
FORM BUILD_FIELD_CATALOG.
DATA: FC_TMP TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
CLEAR: FIELDCAT. REFRESH: FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Status'.
FC_TMP-FIELDNAME = 'LIGHT'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '4'.
FC_TMP-ICON = 'X'.
APPEND FC_TMP TO FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Material Number'.
FC_TMP-FIELDNAME = 'MATNR'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '18'.
APPEND FC_TMP TO FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Material Type'.
FC_TMP-FIELDNAME = 'MTART'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '10'.
APPEND FC_TMP TO FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Material'.
FC_TMP-FIELDNAME = 'MAKTX'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '40'.
APPEND FC_TMP TO FIELDCAT.
ENDFORM. "build_field_catalog -
Please Help Urgently to refresh the report on the change in data
We want to refresh report at runtime for the Drill Down report if any user changes the Data. We changes the data from the form which is called from the report and we want to this effect on the report on the prompt.
Is there any method to close the report while it is in the queue of Background Engine? Can we refresh the report ? Please help urgently.
Thanks in Advance.Pritesh,
Reports goes out to the database and fetches the data (not a snapshot) and returns the information, formats it and displays it. The only way to refresh, is to rerun the report.
If your are running from the server, you need to make sure you are not fetching from cache (you determine this from destype and set the life of the cache in the servername.ora file).
I am unaware of any way to programatically close the report once displayed. The user must take action to close the report (unless you call the operating system to kill the display). When you rerun the report from Oracle Forms, you will get fresh data.
Regards,
The Oracle Reports Team jls -
Missing line in Sales Report that does not have customer item info
I have to say first is that I love this forum.. just by reading I have figured out how to resolve several issues I was stumped on. THANK YOU!!
I am using Crystal Reports version: 11.5.12.1838 with Dynamics GP and it's on Windows 7 O/S.
I have set up a sales picking ticket using the following tables: IV00101, SOP10100, SOP10106, SOP10200, and SOP60300.
On the report I have our product number (SOP10200.ITEMNMBR) and our product description (SOP10200.ITEMDESC)..I also have the customer product number (SOP60300.CUSTITEMNMBR) and customer product name (SOP60300.CUSTITEMDESC).
The issue is when an item only has our product number and description without the customer information the line does not show up on the report.
The tables are linked as such:
SOP10200.ITEMNMBR u2192 IV00101.ITEMNMBR
SOP10200.SOPNUMBE u2192 SOP10100.SOPNUMBE
SOP10200.SOPNUMBE u2192 SOP10106.SOPNUMBE
SOP10200.ITEMNMBR u2192 SOP60300.ITEMNMBR
SOP10100.CUSTNMBRu2192 SOP60300.CUSTNMBR
I would really appreciate any help you can give me with this.
Thank you,
CynthiaIf you want to get even the product details irrespective of customer details exist or not then you may need to look into the join condition used between the table
Check whether you are using inner join this may not help.....you will have to use some other join like left OJ or Right OJ or something like that
Thanks,
Ganesh -
ABST2 - How to take the report for the previous fiscal year
Hi,
For FI-AA reconciliation, my scenario is this: The current fiscal year is 2009 and the system (server) date is 16-Apr-2009. My fiscal year period is: Mar-Apr. In ABST2, it does not accept Fiscal year. When I take the report, it displays for fiscal year 2009, which I don't want because I want it for the fiscal year 2008 to reconcile between FI and AA. The fiscal year 2008 is not yet closed in both FI and AA, so I want the report for 2008 only. But ABST2 always gives the report for the current fiscl year. Is there any way out to get the report for 2008?.
Thanks,
Kannan SThis report is based on the actual values. In the past this report was used for EURO conversions to see if the values are in line. When not it was not possible to do the euro conversion.
Normal it is a part from the fiscal year closing -
Report 6i/Webdb -Not able to display the report in the browser - rep- 3002 error.
Would someone tell what I missed, I have set up the following:
1) a report using report builder on NT
2) my database is in Unix
3) my report server is started in NT
4) I run webdb listener for the following code: http://myweb.com/cgi/rwcgi60.exe?server=repserver+report=myreport+userid=usid/pw/connect_string+destype=cache+desformat=html. Then, I receive this message:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Report Job has terminated with error.
Reports Server Replies:
REP-3002: Error initializing printer. Please make sure a printer is installed.
Why is it thinking I want to use the printer whereas I want to display the report in the browser?. Any help would be appreciated.
nullIt sounds like that your Web CGI did not configure right. To test if your CGI configuration is correct, type:
http://hostname:port/cgi-bin/rwcgi60exe?
If you get a help screen, then you should be able to bring up your report.
Regards,
Xiaoling -
Hi, my MacBook Pro cannot open Safari. It crashes and gives the message, ' Safari quit unexpectedly while using the librooksbas.dylib plug-in" the report details the exception code as 'EXC_BAD_ACCESS (SIGSEGV)' and exception codes as: 'KERN_INVALID_ADDRESS at 0x0000000920
Remove "Rapport" by following the instructions on this page.
Back up all data before making any changes. -
How to Download the report from the workitem?
Hi,
I have one typical requirement that is to download the report from the Workitem by the manager?
Would any body please give the solution and procedure?
If you have any sample code for that give it tome?
Early reply is appriciable.
Regards,
Chow.If it is an ALV report you don't have to do any coding. You don't say which report it is.
If it is a report that uses write statements you can also export to a spreadsheet, but of course the cell matching is not quite as for ALV reports since the report creator decides the alignment. Use the menu item "System" => "List" => "Save" (the menu item names may be a little different since I have translated them from Norwegian). -
Hello,
I've inherited the ReportClass.
public class PReport : CrystalDecisions.CrystalReports.Engine.ReportClass
protected DataSet dataSet;
public override void Export(CrystalDecisions.Shared.ExportOptions exportOptions)
base.Export(exportOptions);
this.Customize(exportOptions);
public override void SetDataSource(DataSet dataSet)
base.SetDataSource(dataSet);
this.dataSet = dataSet;
public void main()
PReport report = myObject.CreateReport();
report.SummaryInfo.ReportSubject = this[CriteriaName].StringValue; <<< exception
in the debug mode, when passing the line, I obtain:
- report.SummaryInfo 'report.SummaryInfo' threw an exception of type 'CrystalDecisions.CrystalReports.Engine.LoadSaveReportException' CrystalDecisions.CrystalReports.Engine.SummaryInfo {CrystalDecisions.CrystalReports.Engine.LoadSaveReportException}
Unable to find the report in the manifest resources. Please build the project, and try again.
I have rebuit the project bat the behavior didn't change.the same exception message I obtain when calling
public override void SetDataSource(DataSet dataSet)
base.SetDataSource(dataSet); <<< here -
Hi,
I have a report which is calling a stored procedure..
Stored procedure exceutes 4-5 stored procedure and then returns the count each procedure it ran using union all statement... The stored procedure takes around 3-4 hrs to run because it is looking at quarterly data and YTD data.
So once the report is kicked off and the procedure behind it runs and runs how will communicate to the report to show the final data... the final data will just be 5 rows with counts.
I think we are running into a issue where the stored procedure runs and runs and then the report goes into la la land and has no clue what to do...
Can you please shed some light on this..
Thanks
KarenHi Karen,
When we render a report, the report would process the following procedures:
Open connections to data source and reading data rows from data extensions for all datasets, means retrieve data. Then process the engine requests, including the tablix, grouping, sorting, filtering, aggregations and subreport processing, means process report.
Finally, render the report, including the pagination modules and on-demand expression evaluations.
So the report rending has to wait until the stored procedure is executed. To improve the performance, we can consider the three aspects:
Improve the performance of the stored procedures. Such as index and join. For better support, I suggest you can post a new thread about this issue in Transact-SQL forum at:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=transactsql. It is appropriate and more experts will assist you.
Simplify the report. For example, avoid including a reference to [&TotalPages] or any complex expressions in the page header and page footer. For more details, please see the following document:
http://technet.microsoft.com/en-us/library/bb522806(v=sql.105).aspx
Using cashing if you have a long-running query that cannot be tuned further. For more details, please refer to the following article:
http://msdn.microsoft.com/en-us/library/ms159241(v=sql.110).aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
The number of display columns in the report reached the limit" Interactive Report
I get the error message of "The number of display columns in the report reached the limit" when trying to display less than 100 (100 is limit) columns when an aggregate has been created. This does not happen when an aggregate has not been added to the IR report. It seems to happen because I have a control break on as well. When I turn off the control break it works but is not the result that we want. Interesting enough, if I filter the results down to 500 rows it works just fine. Does oracle treat aggregates as columns!? This is a really odd issue that I really need to clear up.
Oracle 11g
apex 4.1.0.33
Thanks in advance,
Shawn.Hi,
i have set up a small test case on apex.oracle.com and I receive the same error if I use download format.
I have a table
test_blob (id number, name varchar2(10), blobcont blob)
If I create IR like
select
id,
name,
blobcont
from test_bloband then I define download format I hit the error.
If you want this to work you have to change your query to
select
id,
name,
dbms_lob.getlength(blobcont) blobcont
from test_blobAnd then again define download format for blob on blobcont column.
Regards,
Aljaz -
BIP not able to open the reports from the catalog
Hi everyone,
I am trying to open the existing reports from the catalog. When i try to expand the folders am getting all the subfolders and evrything and when i am trying to open a particular report am unable to open it, am not getting the data. For all the reports in the catalog am getting the same pbm. What might b the pbm for that, Could anyone pls ans my question bcoz i am having requirement on BIP which am new to it.,,,,
Regards
LalithaHi,
I am trying to open the reports from the shared folders. But am unable to expand the content of that folders and reports. I am using the database as TERADATA. Do we need any security changes for that to acess all the content from the shared folders from BIP side. I am working with the administrator role.,
Regards -
Two commands in the report using the same parameter - fail under Java
I have a report that contains 2 SQL commands.
Both of these commands use one parameter X of type Number in their 'WHERE' clause.
When i'm viewing the report in CR 2008, i'm asked for a value of this parameter and all data is filled in the report - OK
The problem occurs when the same report is printed through Crystal Java Runtime:
Report is printed without data! - it's empty.
What we noticed in the debug information thrown by the Crystal libraries is that parameter value is set only in one of these commands:
Original statement 1:
select a.something
from ANM_T a
where a.anmid = {?PARAMETER01Id}
Original statement 2:
SELECT * from ANM_T a
WHERE a.anmid={?PARAMETER01Id}
OUTCOME of Statement 1:
select a.something
from ANM_T a
where a.anmid = 0
OUTCOME of Statement 2:
SELECT * from ANM_T a
WHERE a.anmid=9825
In above example we may see that crystal set the value only in the second statement - first one got 0 - i suspect its some default value.
Parameter in the Java code is set in the right way. In case of using only one statement it works. If we use two separate parameters (whose values are equal ) it also works.
// we have also the loop over the parameters
ParameterFieldController paramFieldController =
report.getDataDefController().getParameterFieldController();
paramFieldController.setCurrentValue( "", paramName, paramValue );
What is strange for me is that Crystal Reports enables to use the same parameter in two commands but if you edit one of them you may change the type of this parameter for a command ( for example from Number to String) but the parameter type in the second command remains unchanged ( it's strange because in my opinion it is the same parameter). In the Field Explorer under the Parameter Fields i still see one parameter of type used in the second command.Hello all,
We have prepared some sample code to illustrate the issue.
We have modified the sample application (Link: [http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/c07fec3e-3e11-2c10-1991-8c0fb0b82b75]) to that it also changes the parameter value. Parameter is used in two commands saved in report.
The code changing the parameters value looks like this:
private static void changeParameters(ReportClientDocument reportClientDoc) throws ReportSDKException {
DataDefController dataDefController = reportClientDoc.getDataDefController();
Fields fields = dataDefController.getDataDefinition().getParameterFields();
for( int i = 0; i < fields.size(); i++ ){
Field field = (Field)fields.getField( i );
if( field.getKind() == FieldKind.parameterField ){
setParameter( ((ParameterField)field).getName(), "9825" , reportClientDoc);
private static void setParameter( String paramName, String paramValue, ReportClientDocument document ) throws ReportSDKException {
ParameterFieldController paramFieldController =
document.getDataDefController().getParameterFieldController();
paramFieldController.setCurrentValue( "", paramName, paramValue );
We have tried the following codes to change the connection info used in commands:
Attempt 1
Tables tables = databaseController.getDatabase().getTables();
//Set the datasource for all main report tables.
for (int i = 0; i < tables.size(); i++) {
ITable table = tables.getTable(i);
//Keep existing name and alias.
table.setName(table.getName());
table.setAlias(table.getAlias());
//Change connection information properties.
IConnectionInfo connectionInfo = table.getConnectionInfo();
//Set new table connection property attributes.
connectionInfo.setAttributes(propertyBag);
//Set database username and password.
//NOTE: Even if these the username and password properties don't change when switching databases, the
//database password is *not* saved in the report and must be set at runtime if the database is secured.
connectionInfo.setUserName(DBUSERNAME);
connectionInfo.setPassword(DBPASSWORD);
connectionInfo.setKind(ConnectionInfoKind.SQL);
table.setConnectionInfo(connectionInfo);
//Update old table in the report with the new table.
databaseController.setTableLocation(table, tables.getTable(i));
//databaseController.setTableLocation(tables.getTable(i), table);
Attempt 2
newConnectionInfo.setAttributes(propertyBag);
connectionInfo.setUserName(DBUSERNAME);
connectionInfo.setPassword(DBPASSWORD);
//preserve subreport links
SubreportController src = doc.getSubreportController();
Map<String, SubreportLinks> linkMapper = new HashMap<String,SubreportLinks>();
for(String subreportName : src.getSubreportNames()){
linkMapper.put(subreportName,
(SubreportLinks) src.getSubreportLinks(subreportName).clone(true));
//If this connection needed parameters, we would use this field.
Fields<IParameterField> pFields = doc.getDataDefController().getDataDefinition().getParameterFields();
replaceConnectionInfos(doc.getDatabaseController(), newConnectionInfo, pFields);
IStrings strs = src.getSubreportNames();
Iterator<String> it = strs.iterator();
while (it.hasNext()) {
String name = it.next();
ISubreportClientDocument subreport = src.getSubreport(name);
pFields = subreport.getDataDefController().getDataDefinition().getParameterFields();
replaceConnectionInfos(subreport.getDatabaseController(), newConnectionInfo, pFields);
//reconnect subreport links since when using replaceConnection links are erased
for(String subreportName : src.getSubreportNames())
src.setSubreportLinks(subreportName, linkMapper.get(subreportName));
private static void replaceConnectionInfos(DatabaseController aDc, IConnectionInfo aNewConnInfo, Fields<IParameterField> aParameterField) throws ReportSDKException {
ConnectionInfos cis = aDc.getConnectionInfos(null);
for (IConnectionInfo oldConnInfo : cis)
aDc.replaceConnection(oldConnInfo, aNewConnInfo, aParameterField, DBOptions._useDefault
+ DBOptions._doNotVerifyDB);
In both cases, the observed problem occurred. In one query the parameter was set properly, while on the other it was set to 0 (or empty string in case of string parameters). What is more, no data appeared on the print.
Do you happen to know the reason of this issue?How can we fix the problem?
Best regards
Mateusz Błaż -
How can I print a label on the last page of the report in the margin
I would like to display a label on my report but has to appear only on the last page of the report in the margin area or as a footer. I have tried using the solution below that I came across in this forum. This solution only worked if I put the label as a report trailer and not in the margin of the main section of report. The problem of putting the label as a report trailer is that it will only appear at the end of the report on it's own page, i.e. on a new page. I would like the label to appear at the end of the report, on the last page which has the other report details and not to appear on a new page on its own. Could you please help? Thanks.
1. Create a dummy query, like
select 1 dummy
from dual
2. Create a package spec:
PACKAGE pkg_globals IS
totalPages number(3);
END;
2. Create a repeating frame and field for this dummy at the end of the report layout.
3. Create a format trigger for this frame:
function R_1FormatTrigger return boolean is
begin
SRW.GET_PAGE_NUM(pkg_globals.totalPages);
return (FALSE);
end;
4. Create a format trigger for your margin field:
function F_1FormatTrigger return boolean is
pagenum number;
begin
srw.get_page_num(pagenum);
if pagenum = pkg_globals.totalPages then
return (TRUE);
else
return (false);
end if;
end;user8655468 wrote:
I would like to display a label on my report but has to appear only on the last page of the report in the margin areaCreate a fixed frame at the bottom of margin area and inside the frame put your label.
set the frame print object on: Last page
Hope this works.. -
I want to fill the rows of the report from the loop
I want to fill the rows of the report from the loop
For example, in forms
cursor bdl is select code,decode(:global.user_lang,1,name,2,latin_name) name
from GL_ANALYSISHDR
begin
go_block('bdls');
clear_block;
first_record;
for rec in bdl loop
:bdls.code:=rec.code;
:bdls.name:=rec.name;
next_record;
end loop;
go_block('bdls');
first_record;
end;
I tried to use the REF CURSOR
But it return the values in one time and does not allow me to conduct and control ofWhy do you need to do it by a curesor loop? Can't you put the query in the datamodel of the report and simply pass the parameter to restrict the query?
Maybe you are looking for
-
No sound on my nokia lumia 1020
i'm having problems with my nokia. i am not getting any sound coming from it either from notifications like if someone is calling/texting me nor trying to play music or hear cortana etc. Just no sounds whatsoever. Is there anything I can do to rec
-
hi, I wrote the following statements: public static void main(String[] args) throws Exception String docname = "test.xml"; String sheetname = "test.xsl"; SAXBuilder builder = new SAXBuilder(); Document doc = builder.build(docn
-
802.1x Guest Vlan and Routed access layer design
Hi! For many reasons, I have to re-design my campus network in a more ISP like way. The plan is to move to a routed access layer in the next two years. I have 802.1x with guest vlan on my access ports(3750). I was reading on the subject and I found t
-
The itunes on My new iPad keeps going to podcasts and Not to music or videos
The itunes on My new iPad keeps going to podcasts and Not to music or videos?
-
Burning video to DVDs - what discs?
I just got my powerbook and have a lot of "Lost" episodes to move... both in AVI and iTunes format. What discs do I need, and what's the most efficient way to burn it so it'll read both on my computer and on a TV?