MM - ECC 6.0 Certification
Hi All,
I want to go for Certification in MM - ECC 6.0. So please tell me tips and If you have any sample or certification questions please send me to '[email protected]'
Points will be rewarded
Thanks,
Naveen
Hi,
The MM exam:
1) The examination questions are grouped together on topic-wise and evaluated accordingly. You can see at the beginning of the first book some plus marks against each topic. So don't treat the questions as 57 right answers out of 80. For example from "solution manager" two or three questions will be there but it is a topic i.e. if you answer all the questions out of it you will get 100% in that topic. All the topics are evaluated separately and the overall is taken as the final result. Check with your tutor or someone for more awareness.
2) Decimal marks will be there and marks will be given proportionately for the questions you attend. No negative marks.
3) For single answer type, there will be only radio buttons so that you can select only one.
4) For multiple answer (where more than one answer is correct) type, against each statement (answer) there will be two buttons for true and false so that you can (have to) select one.
5) Read and be familiar with the books as much as possible. Group discussions will be very much useful.
6) Once you attend th exam, you will find it easier than you expected.
Prepare well, be relaxed, best of luck.
The Do and Don't
Don't look for dumps as you will find none in whole world .Go by each word , sentences and get familiar of all the screen that comes while doing excercise.
SAP certification is not like microsfot or CISCO certifications where one can easily get the dumps.
You need to complete the chapter end exercises thoroughly at least you expect 7 - 10 questions in your certification exams .
Purchasing II books carries 30 questions in certification.
Read all the 4 books at least 4-6 times at least not less then that .
Don't concentrate much on week end exams.
Don't loose patience as you will tend to feel that you don't know anything as exam dates get closer, feel free and relax and sleep at least for 10 hours before exam .
pls go through this link also:
http://www.sap-img.com/mm015.htm
All the very best.
Reward if useful
Chandru
Message was edited by:
CHANDRAMOHAN NATARAJAN
Message was edited by:
CHANDRAMOHAN NATARAJAN
Similar Messages
-
MODERATOR: All points have been UNASSIGNED and the thread LOCKED. Please do not share email addresses or links to copyrighted or company confidential information on these forums. If you have some information, please consider posting it to the [Wiki|https://wiki.sdn.sap.com/wiki/display/ERPFI/Home] rather than sharing via email. Thank you for your assistance.
Hi Guys,
Could anybody please suggest me the books & materials for SAP ECC 6.0 Certification. I am taking exam for "SAP Certified Solution Consultant Financials - Financial Accounting with SAP ERP 2005"
Also how to get these materials: TFIN50, TFIN52, ERP001, ERP020, SAP125, SM001
Thank You...Hello!
I would also like the materials ERP001, ERP020, SAP125...
Could anyone please send them to me at my gmail address: tonia.antonopoulou
thanks in advance!!! -
Phasing out ECC 6.0 Certification
Hi,
From my resources i come to know that SAP is phasing out there ECC 6.0 Certification w.e.f 31st dec 2010. Is this true, wat if someis just enroll in the course and will not able to give the exam by december.
Regards,
Kapil.Hi Kapil,
Yes its tru that ECC 6.0 is phasing out and only tfin52_64 based on the enhancement pack wil be available for certification from now on.
And as far as the certification goes, all the institutes have got prior guidelines from SAP itself in the month of november, as not to give anymore enrollments into that module as one needs to complete 200 hrs. of training.
In case u are talkin about the e learing part in which a student has 5 mnths to prepare and has enorlled for the same but hv nt givn the certification yet, he must have been given prior deadlines by the institute to appear for the same.If still not appearing then a fresh new enrollment needs to be done onto the newer version.
Rgds,
Prashant -
SAP HR ECC 6.0 certification materials
Hi HR gurus,
Iam working as ABAP HR consultant more than 3 years, Now i planned for get certification on SAP HR ECC 6.0 by myself.
Please give me some inputs that where can i download certification materials for SAP HR ECC 6.0 .
If somebody already have, please share it.
Thanks in advance.
Regards,
Ranjith
Edited by: Ranjith Karuvadiyil on Jan 4, 2009 12:30 PMhttp://www.learnsap.com/config/hcm_certification.doc
-
ECC 6 - SAP Certification Material - Controlling
hi
If anybody has SAP Certification material for Controlling for ECC 6. Kindly send to the E-mail Id - [email protected]Hello
SAP Certification material is very tough to get.
People spend hundreds of thousands for certification and it is a height to expect the prized material.
However, there could be people who are willing to part with the material. In case, you get it, place it in the forum, so that everyone else can down load it.
Reg -
Hi Friends,
Does some one have FI and CO certification material for ECC 5.0 ?
TFIN50 (Financial Accounting I),
TFIN52 (Financial Accounting II),
TFIN54 (Financial Accounting III (Case Study)
If so please send it to [email protected]
Thanks,
KripaHi
These are the websites which give you good material for certification.
http://www.sapfans.com/sapfans/sapfaq/sapcert.htm
http://www.sap-img.com/sap-fi.htm
http://www.sapprofessionals.org/?q=125_fi_questions_for_certification
http://www.sap-img.com/zf006.htm
http://www.suvendu.com/sap-encyclopedia.html
http://www.amazon.com/FICO-Interview-Questions-Answers-Explanations/dp/1933804106
http://www.sapcert.info
FICO Certification
http://www.sap-img.com/financial/sap-fi-co-sample-questions-answers-2.htm
Hope this helps
Regards
Jyostna -
FI ECC 6.0 certification
MODERATOR: All points have been UNASSIGNED and the thread LOCKED. Please do not share email addresses or links to SAP copyrighted information on these forums. If you have some information, please consider posting it to the [Wiki|https://wiki.sdn.sap.com/wiki/display/ERPFI/Home] rather than sharing via email. Than you for your assistance.
Dear friends,
I would like to know any of you just taken the FI Certification in year 2007? I Would really appreciate if someone can send me the material for FI certification (TFIN50 and TFIN52) to my email: [email protected]
Please help and thank you so much.
Regards,Muralidharan,
Look these links below:
http://www.sap.com/services/education/certification/index.epx
http://www.sap-img.com/zf006.htm
http://www.suvendu.com/sap-encyclopedia.html
http://www.amazon.com/FICO-Interview-Questions-Answers-Explanations/dp/1933804106
http://www.sapcert.info
http://www.sap.com/trainingcatalog
http://service.sap.com/certification
http://www.sap.com/asia/education/
http://www.sap.com/asia/education/
http://www.sap.com/trainingcatalog
http://www.sap.com/asia/services/education/centres/partners.epx
I am sending a e-mail with others materials.
Assign points if I helped you. -
SAP-Ceritification Material-ECC-5.0
Dear All,
I wish to do the certification for FI / CO module - ECC 5.0 version.
If any of you are having the documentation, Please forwad
my email id is [email protected]
Regards
AnilkumarHi,
Can anyone send SAP FI ecc 6.0 certification material/ pdf files to my mail id:
[email protected]
regards, -
Changing user who calls Enterprise Service dynamically
Hello all,
I'd like to call Enterprise Service as Portal logon user.
As you know Enterprise Service is implemented on ECC, it always requires ECC's user/password when I access it.
Off the top of my head I may use logon ticket, but it does not work well for Enterprise Service.
I've already done the system configuration to use logon ticket - setting profile parameters of ECC, importing client certification and so on.
What I tried:
1. Create Destination at "Web Services Configuration: WS Destination"with following parameters:
Destination Type: WSDL
URL: http://<hostname>:<port>/sap/bc/srt/xip/sap/ECC_SALESORDERCRTRC?sap-client=800&wsdl=1.1
Authentication: HTTP Authentication, Logon Ticket
2. Try to test ES at "WS Navigator"
-> When I search ES in destination which I created, the following error occurred:
Invalid Response Code: (401) Unauthorized. The requested URL was:"http://<hostname>:<port>/sap/bc/srt/xip/sap/ECC_SALESORDERCRTRC?sap-client=800&wsdl=1.1"
When I changed destination's settings as follows, testing ES at "WS Navigator" succeeded.
Authentication: HTTP Authentication, User ID/Password(Basic), apply fixed user
But I'd like to change user who calls ES dynamically, because I want to set the user who creates sales order to Portal logon user.
Could you give me any advice?
Ikuehi lkue,
Please see my weblog @ https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/7891. [original link is broken] [original link is broken] [original link is broken] When you create SM59 HTTP destination, select "send logon ticket" or "logged in user id /password" . This will automatically use logged in user id dynamically.
Hope it helps you and solves your problem.
Regards,
Arul -
Exam Content & Weighting Information
Dear Gurus
while taking the SD certification exams , we had a section called
"Exam Content & Weighting Information", which gives in terms of "++" the weightage of a category. where :-
Weighting Key in the Test:
+ = 1 - 10%
++ = 11 - 20%
+++ = over 20%
Can anyone post the same for a MM certification please.
Regards
Manoji got it from this link H:my documentspersonalCertification Requirements Documentation.htm
reward if helpful
SAP Consultant Certification
Solution Consultant SCM - Procurement with mySAP ERP 2005
Software components: SAP Enterprise Central Component (ECC) 6.0
Certification exam is included in course TSCM52 and is also offered in separate certification events at many SAP locations.
Certification ID (Booking code): C_TSCM52_05
Certification duration: 3 hours
Number of certification questions: 80
Required certificates for participation in this certification test: None
Consultant Academy courses for certification preparation: TSCM50 (Procurement I), TSCM52 (Procurement II (incl. Case Study)) and the e-learning courses SAP125 (Navigation), ERP001 (Management empowered by mySAP ERP), SAP210 (Procure to Pay), SM001 (Solution Manager Overwiew)
Alternative Project Team Training courses for certification preparation: SCM500 (External Procurement Processes), SCM525 (Consumption-Based Planning), SCM520 (Purchasing), SCM515 (Invoice Verification), SCM510 (Inventory Management and Physical Inventory),SCM550 (Customizing in Materials Management) and case studies from TSCM52 (Procurement II (incl. Case Study)) and the e-learning courses SAP125 (Navigation), ERP001 (Management empowered by mySAP ERP), SAP210 (Procure to Pay), SM001 (Solution Manager Overwiew)
Please note that you are not allowed to use any reference materials during the certification test (no access to online documentation or to any SAP system).
The certification test Solution Consultant SCM - Procurement with mySAP ERP 2005 verifies the knowledge in the area of the Procurement] for the consultant profile. This certificate proves that the candidate has a basic understanding within this consultant profile, and can implement this knowledge practically in projects.
The certification test consists of questions from the areas specified below:
Topic Areas
1. SAP Overview
SAP navigation
Management Empowered by mySAP ERP
Procure-to-pay
2. Procurement Process (++)
Purchase requisitions
Purchase orders
Requests for quotations
Procurement for stock
Procurement for direct consumption
Subcontracting
External services
Reporting
3. Master Data
Material master
Vendor master
Purchasing info records
Source list
Quota arrangement
Messages
4. Purchasing Optimization (++)
Contracts
Scheduling agreements
Invoicing plans
Document release procedure
Purchasing document configuration
5. Inventory Management (+++)
Goods receipts
Goods issues
Stock transfers
Reservations
Consignments
Physical inventory
Availability check
Transaction types
Messages
6. Valuation and Account Determination
Material valuation
Price control
Account determination
Split valuation
7. Material Requirements Planning
Reorder point planning
Lot-size calculation
Planning run
Planning result
8. Logistics Invoice Verification (++)
Invoices
Credit memos
Automatic settlement
Invoice verification in the background
Adjustments
Freight invoices
Blocked invoices
GR/IR clearing account maintenance
9. Configuration of the Enterprise Structure and the Material Master
MM organizational levels
Material type
Field selection
10. Solution Manager
Overview of the Solution Manager
11. Experience from Implementation (Case Study or Project)*
Design of enterprise structures (organizational levels in mySAP Business Suite)
Integration and dependencies
= Cross-subject implementation and integration knowledge is tested in subject area 11. Implementation and integration knowledge referring to a special subject (such as goods receipt) is tested in the relevant subject (such as inventory management).
Amount of questions by topic (as a percentage of the test):
+ = 1 - 10%
++ = 11 - 20%
+++ = over 20%
No responsibility is taken for the correctness of this information. Copyright © SAP AG 2006. -
Topics Included in ECC 5.0 SD Certification Test
Hi Everyone,
I' ve a fair idea of the certification acitivity and I have the SAP material for R/3 4.6B version.
Now I'm planning to appear for the direct test,ECC 5.0 version.
Request you to let me know what else are the topics apart from core SD.
I understand there is a section on Solution Manager too, but need to check with recently certified guys.
Thanks and Regards,
HemantYou can try any of the links mentioned below
http://www.sapbrainsonline.com/TUTORIALS/FUNCTIONAL/SD_tutorial.html
http://www.sap-img.com/sap-books.htm
http://www.sapgenie.com
http://ittoolbox.com
Reward points if useful. -
ABAP certification only for people using ECC 5.0 version and above
Hi all,
I requested for the ABAP certification to SAP education india
They said that only if we have experience in ECC 5.0 then only we are allowed
Is it so..?
i am applying for certification through our company.
People working in 4.6 or 4.7 are not allowed to take up the certification..?
how can i take up the certification?
Please help....
Thanks
---Patil
Message was edited by:
Santhosh Patilrefer these links
<b>to get the people of SAP to answer</b>
https://www.sap.com/contactsap/index.epx
<b>to know details regarding SAP education</b>
http://www.sap.com/asia/services/education/index.epx
<b>to contact SAP in Asia-Pacific region</b>
http://www.sap.com/asia/services/education/contact/index.epx
<b>other contact details of SAP education in india</b>
http://www.sap.com/asia/services/education/centres/partners.epx
<b>for Course Schedule July - Dec 2007</b>
http://www.sap.com/asia/services/education/schedule/schedule_IN.htm
regards,
srinivas
<b>*reward for useful answers*</b> -
Certification for fi in Ecc 6.0
Hi
This is Amar i need some healp for certification, now i am doint certification for FI in Ecc 6.0.
some of them is saying most of the qustion will come from the dum qusation papers, so where can i fine
thouse dum-qusation papers. is possiable send ULR link.
Thanks,
AmarPlease go through the curriculum below:
https://training.sap.com/us/en/certification/c_tfin52_64-sap-certified-application-associate-financial-accounting-with-sap-erp-60-ehp4-g/#related-curricula
It is just not one book, you should go through all the books, at least not less than 5 times.
You must read
SAP129
SM001
TERP01
TERP21
TFIN50
TFIN52
https://training.sap.com/us/en/curriculum/fin_05_fi_acc_sol-solution-consultant-financials-financial-accounting-g-en
Thanks and Regards,
Ravi -
SAP SD certification ECC 6.0 marking scheme
Hi,
I am planning to sit for the SAP SD certification ECC 6.0.
Could you please advise whether part marks will be given for questions,
ex: If in a question we are asked to mark all the answers which are correct, of which there are 3 correct answers. we have marked 2 of those as correct, are we given any marks?
Also is the passing mark 70%?
Thanks,
KeshiI think the current pattern of the exam has changed. I passed all my certification under old valution method.
Now no partial credit will be given. SAP will tell you in advance how many correct answers are there.
Means, you need to identify the right answers. The pass percentage is 55%
Regards,
Ravi -
Siggestion needed : SAP Certification Program ECC 5.0 versions
hi could you please suggest where i could get good study material for this certification.
SAP Certification Program ECC 5.0 versions
thanks in advance,
Naval BhattHi,
I have answered this query in detail, please view the below link. Have also provided the link to download the required material for WAS 640 certification.
WAS Certification
rewards points if helpful.
Awaiz.
Maybe you are looking for
-
Trouble Connecting to Wireless Using Netgear VMDG280
Hi, I have fibre optic broadband from Virgin Media and they provided a Netgear VMDG280 router for wireless connection when it was installed. I was able to connect without any problems for about two months but this month I have had to run Network - Di
-
does the built-in DAC on my 2007 mid yr iMac support 96/24 audio as it supplies signal to the headphone jack? If so, is there a reason to export audio via optical jack then to an external DAC then to stereo?
-
Why is using Places in iPhoto 11 such a hairy hassle?
Here is the feedback that I just sent to Apple: "Why is defining a place such a hassle? Don't bother telling me the steps -- I know them too well. Tell me why, when I select a photo, type something in the teeny-weeny Assign a Place... dialog, then
-
[SOLVED]Network Manager Applet and nmcli failing after GCC upgrade
Hi All, So I went to update my system today and there were only like 8 or 9 updates. Like many other people I had an issue with gcc and pacman. To fix this I ran pacman -S gcc Then I ran: pacman -Su which updated pacman itself. On reboot though I not
-
How to define field of number type in ecs file
Hi B2B Experts, I need some help. In the detail record of my ecs file, i need to define a filed as number. Basically the data coming in the data file is a dollar amount. It is a number type. The number length maximum length is 6, The spec file says t