MM - LIV Stochastic Block for Invoices at MIRO

Dear friends ,
Does anyone know the correct function of " Stochastic Block" in the Logistic Inovice Verification customizing ?
Path:SPRO> Materials Management > Logistics Invoice Verification > Invoice Block > Stochastic Block > ...
> Activate Stochastic Block
> Set Stochastic Block
How it works ?
Best regards,
Ale

Please use this link,hope it will help you to understand :
http://help.sap.com/saphelp_47x200/helpdata/en/a8/b99560452b11d189430000e829fbbd/frameset.htm
Prashant
Edited by: Prashant Prasad on May 11, 2009 1:24 PM
Edited by: Prashant Prasad on May 11, 2009 1:26 PM

Similar Messages

Avoid blocking for Payment after MIRO

Hi Experts,
How to avoid this blocking for Payment after MIRO is posted
As our Invoice receipts are going to Blocked for Payment for every Invoices we posted in MIRO
If the Invoice Receipt matches with the PO price then it should not block,No need for blocking the Payment.Otherwise everytime we need to run MRBR to release this blocked invoices.
We want Only for Upper/Lower tolerances,the system should block for Payment.
rgds
Swamy

Hello Swamy ,
"Variances are allowed within predefined tolerance limits. If a variance
exceeds a tolerance limit, however, the system issues a message
informing the user. If an upper limit (except with BD and VP) is
exceeded, the invoice is blocked for payment when you post it. You must
then release the invoice in a separate step. If the tolerance limit for
BD is exceeded, the system cannot post the invoice."
The system will check the lower limit but an invoice will never
be blocked if the lower limit is exceeded. The system will only
display a warning message. In the standard system invoices will only be
blocked if the upper limit is exceeded because normally one
wants to prevent to pay more than expected.
Also you may review user exit exit_saplkont_002, enhancement MM08R002
for blocking.
Regards ,
Jerin Ipe John .

Set Up Material Block for Invoice Verification

Hi,
Please share your experience for customization setting under General settings for material management "Set Up Material Block for Invoice Verification".
When should we use " Material is bloked at first read" and "Material is blocked when invoice is posted".
Does it improve MIRO transaction performance if we chnage the setting from " Material is bloked at first read" to "Material is blocked when invoice is posted"?
Thanks & Regards,
AG

Hi,
Set Up Material Block for Invoice Verification
Use: -
   In this step, you specify at what point materials are blocked in Invoice Verification:
   o   During the allocation phase, all materials present in the invoice are blocked.
   o   During simulation or posting, materials whose stocks are to be changed are blocked and are read again.
   o   Materials whose stocks are to be changed, are blocked and are read again when you post.
   When you post directly to a material, the given material is blocked immediately in all settings.
Standard settings: -
In the standard system, materials are blocked during the allocation phase.
It is suggested to block materials during allocation phase itself, so that user has not to enter all the details and then get block error at the time of Simulation or Posting. Also it improves the performance since all these transactions need not to be carried out and system informs initially that materials are blocked.
Also refer SAPNote 210828 - Material blocks in logistics invoice verification

Billing block for invoices and credit notes on Sold-tou00B4s level

Hi All
can we have billing block for invoices and credit notes on Sold-to´s level.
please advice.
Thanks
Tushar

Hi
The bellow way at document level.
One more way to maintian the billing block in the functionality of sales document types in VOV8
In VOV8 , Maintain proper value in billing block field.
So that , when you create the order or credit memo request system automatically pick the billing block.
Once remove the block of billling then only system allow to create the billing or credit memo.
Thanks,
KP
Edited by: phanik2503 on Mar 2, 2010 6:46 AM

Field Selection for - Invoice Verification (MIRO)

Dear Experts,
Can anybody please explain how make Field selection for INVOICE VERIFICATION (MIRO).
I want BUSINESS AREA field mandatory in MIRO.
Thanks in Advance

Hi,
Business area is linked to other organizational units (plant, division,
distribution chanel, cost center). It can be defined using assigments
(e. cost centers to the business area) or combinations of information
(like plant and division determination).
It is usually derived from the account assignments of the cost items
and inherited from there into the vendor line item.
For MIRO,to automatically fill the business area it must be able to
uniquely identify a business area.
This means that for multiple materials each one must have the same
business area for IV to fill the vendor line item.
This is the way the system is designed.
The business area can be set as 'optional' field and is not 'mandatory'
by design.It can be customised according to the individual needs.
Please check the field status in tr OB41/OB14 and OB23 for the vendor.
Best Regards,
Arminda Jack

Unlimited qty item blocked for invoice payment

Hi All,
I am facing problem in invoice payment.The items has been already assigned for overdelivery tolerance as unlimited quantity, but even then they get blocked for invoice payment telling as because of quantity variance they have been blocked.
Kindly guide for some debugging or parameters to be looked upon.
Regards
Dinesh Singh

Vadim,
You are a real fellow !!!
There is a copyright on myposts !!!
You could at least change a word...
Re: confirmation over PO quantity not possible despite TOG tolerances
Dinesh,
Have you checked all tolerance keys in SRM ?
There are some tolerance key for GR qty, and some for INV amounts.
Rgds
Christophe

Regarding Tolerance Keys for Invoice Block For Payment in MIRO

Hi all,
In customizing, I have defined Tolerance Keys for Invoice Block for Payment. I have defined all tolerance keys for my company code ...... with Absolute as well as Percentage Limits. But whenever I am doing MIRO & testing for my Block Codes effectiveness, i am finding that everytime my Invoice gets Blocked by Tolerance Key PP(Price Variance) or by date......but not by any other like BD, BW, KW etc. Can anyone help me as how I should check for this. I even tried to study the documentation part available in customizing, but was unable to understand the term like Order Price Quantity units.......Can anyone help me in understanding this thing ........
Regards.....

Hi Ganesh,
below is the user exit where you can check the tolarance and put the Block according to the your requirment.
User Exit name - MM08R002 -User exit for tolerance checks
in the above user exit you have to use the below Function exit.
1) EXIT_SAPLMRMC_001
2) EXIT_SAPLMRMP_001
we implemented the above user exit to put the payment block based on the checks.
You can find the documentation of the above exit in the system.
Thanks
Naresh

Invoice Blocked for Payment in MIRO tcode

Dear All,
After posting the invoice in MIRO, i am getting the message as Invoice posted, Blocked for payment. Where we need to do the settings for this ? In this case again i need to release this doc in MRBR, if i don't want this means, what i need to change ?
regds,
CB

HI CB,
While posting a invoice by MIRO, if you come across the following message as block for payment than it is because of Three way matching. You can see three way matching status in purchase order status tab in transaction code ME23N and in purchase order history in item detail.
Generally invoice is blocked for payment because of two issues:-
u2022 Price difference: - Price in invoice is higher than purchase order (above tolerance limit).
u2022 Quantity difference: - Quantity in MIRO is higher than MIGO (or good receipt).
Once invoice is blocked for payment you need to release it for payment via transaction code MRBR. For next time while posting an invoice through MIRO you should post invoice within tolerance limit.
You can display and change tolerance limit for invoice verification in customizing with help of transaction code OMR6.
Regards,
Anand

Blocking of Service Entry for Invoice Varification(MIRO) after acceptance

Let me know is it possible for service entry,aftet it acceptance, for Invoice Varification.
Regards,
Sanjay

hi,
you can reverse/invoke the acceptence of service entry sheet, in transaction code. ML81N.
hope this may help you,
regards,
srinivas

PO BLOCK FOR INVOICE VERIFICATION

Hi,
we have created asset po with A/C assignment category as 'A' and completed GR also.
we want to block this po for invoice verification. Hence, i went to item detail-->invoice--
>activated' FINAL INVOICE'.
still system is accepting for invoice verification.
plz suggest how to block this po for invoice verification.

hi
go to me22n select all items and click on lock button just below it ur items will be locked for further processing
and when u want to do the miro just unlock them
regards
kunal
award if helpful

How to Remove the default Block for payment in MIRO

Hi,
In MIRO after posting the document message is coming,
"Document no. 5105600184 created (Blocked for payment)"
But our requirement is to remove the default "Block for payment"
What is the necessary setting to be done to remove it.
Thanks
Prasant

Hi
Thanks for your reply.
But in vendor master "Payment Transaction Accounting View"
I have selected the check box" free for payment".
still the message is coming in MIRO
Prasant

Material Under Quality - Block for invoice/payment

Dear all,
When the material is lying under quality inspection the user should not be able to do invoice posting or posting.By standard its allowing once GR is done.How to do this
Regards,
Milton.I

Dear Vijay,
There was similar requirement from my client for the same. At that time contacted the OSS.
The message no.280 is there but you can not configure it.
Not allowing to post the external document like Invoice as it comes leads to so much descripency in real time.
The best solution what SAP has given is in QM control key just tick the Invoice and when the invoice of that perticular material comes for posting you can post but that will be blocked for the payment if the material is not cleared from the Quality.
As the material cleared from Quality, you can release the Invoices and if the material is rejected can raise the credit memo.
This is what we did after consulting the OSS
Thanks And Regards,
Krishna Reddy

Quantity Variance block for Invoice

Hi All,
In one scenario I have ordered 27,000KG Materials for 90 per 1000 KG.I did the GR for whole quanity( 27,000 ).
But while doing Invoice I booked for 27 KG as quantity and amount as 2430. Instead of 27,000 KG i did booked Invoice for 27KG with the total amount.Invoice got block with reason price variance.
Here my question is why system is only blocked for price variance ? it should have blocked for Quantity varaince why it is not?
I maintained l tolerance key (DQ) for Quantity variance with higher & low limits.Still it is not blocked with quantity reason.
I have noticed that it is blocking invoice with quantity variance when I entered more quantity than delivered quantity.But why it is happening when I entered less quantity.Can any one explain what could be the reason.
Thanks in advance.
Regards,
Srikanth P.

The lower tolerances generally don't produce a block. They are warning or informational only.
You don't really want a block either. If 100kg are received as 2 x 50kg but you only get an invoice for 50 but at the correct price, you don't want a block. You simply expect another invoice for 50kg.
Regards,
Nick

Block for payment in MIRO if there is blocked stock in quality inspection

Hi all,
In quality inspection, if they put some quantity into blocked stock, then i should go for payment block in MIRO . Here
the QA status may be Pass or Fail.
my payment block will depend upon blocked stock in quality inspection but not on QA status.
Thanks
babu

Hi Pabitra
If the material is taken to QI, then no liability is created for the vendor during GR. Now if you pass it in QA, then the stock moves to Unrestricted stock. Now if you transfer from Unrestricted stock to blocked stock, this will not block MIRO, as the GR/IR has already been hit.
if you bolck payment for these type stock, then you can take help of User Exit, in MIRO
Regards

MIRO : User-exit to block an invoice

Hello,
I try all miro user-exits and badi and nothing works.
I need to block some invoices in MIRO. The badi is good but no export parameters (I try dynamic assignment but it dumped !!)
I you've any idea, I will reward
Thanks

Hi Fabrice,
Please take a look at these threads..
User Exit for FB60 ( Enter Vendor Invoice )
Please help me find a User exit to block a Vendor
cheers,
Prashanth
P.S : Please mark helpful answers

MM - LIV Stochastic Block for Invoices at MIRO

Similar Messages

Maybe you are looking for