MM/ MB01 goods entries : the field WEMPF (recipient) is not available.

The message has been transfered from the SD to the MM forum :
MM/ MB01 goods entries : the field WEMPF (recipient) is not available.
Edited by: Vincent JAYET on Sep 23, 2011 3:59 PM

Than again why you are posting here. Continue all your queries in MM forum which is the right forum for your query.
G. Lakshmipathi

Similar Messages

Field WEMPF (recipient) in Purchase Requisition and Order

Dear All,
I noticed that the text in field WEMPF (recipient) in Purchase Requsition is not copied over when the PO is created from this Purchase Requisition. Also this field is not open for editiing in the PO. I'm not sure this is a standard setup? Any reason ?
Do you know of what I need to configuration to make sure that the value of field WEMPF in the Purchase Requisition is copy over to the Purchase Order.How to I open the field for editing in Purchase order?
Thanks

There is a OSS Note 118008 - MM-SRV: Goods recipient and unloading point missing
explaining:
You cannot display fields 'Unloading Point' and/or 'Goods Recipient' in the R/3 system. The reason for this is that every account assignment object for each service specification can have several unloading points and/or goods recipients.
In particular, only one cumulation for each account assignment object is possible and useful at purchase order item level.
As of Release 4.0, user fields are available in external services management.
You can name these user fields, for example, 'Unloading Point' and 'Goods Recipient'.
A user field belongs to the service line and is purely informative.

Adding search Help - In the transaction MIGO for the Field WEMPF.

Hi All,
In the Transcation MIGO there is a field - Good Recipient ( WEMPF ) -this does not have any F4 help.
Now i need to create a search help for this field.
Can any one suggest me how to proceed.
I am thinking about -- creating a search help - and assigning it to a data elemet(WEMPF) of that field.
is this a right way. if so please guide me the steps to do.
Thanks in advance.
Guru

hie
to add a search help to a particular field u need to get the table name where that field is located. secondly go to se11 and enter an appropriate name for your search help, allocate the table where values are going to be taken as well as the search criteria. Afterwards to the table where WEMPF is and on the search help enter your custom search help. save and activate and you shud try MIGO once more and the field WEMPF should have an F4 help.
regards
Isaac Prince

An entry in field Funds Ctr is not permitted for account 401000 Message no F5394

Hi Friends,
I have done Fund Management configuration and while posting the document through FB50, I am getting error message " An entry in field Funds Ctr is not permitted for account 401000 "Message no. F5394 and I also checked Field status and Posting keys for Gl account and everything looks fine..
Please help on this..
Thanks
Goutam

Hi,
please check the message the error will give you the table number or Programme name
go to SE38 for programme and for table SM30
system will show where is the exact error facing.
thanks

One of the field is disabled(input not possible) after upgrade in FPE1

Hi ABAP Gurus,
I am working on FPE1 Transaction Code and i just find out that after upgrade one of the field on screen is not input possible but before upgrade we have that field as input/output possible .
so now we want same functionality what we have before . so which path do i need to follow because its standard screen .
any suggestion is appreciated .
Thanks,
Jack
Edited by: jack troy on Jun 24, 2009 7:36 PM

Hi Ajay,
Thanks for your reply . My question is can we enable field for input using transaction variant .because if i go to screen layout for FPE1 , i can see that this field is only output possible .
Thanks,
Jack

My recipient is getting response that the file I sent is not available or they are unable to open any files that I send.

My recipient is getting response that the file I sent is not available or they are unable to open any files that I send. I did not have this problem in the previous version of Adobe Send.

Thanks for replying.
If he's reading the email in Outlook, that shouldn't break up the links.
Do you know: is your recipient clicking on the View File button or the URL link?
Lastly, if the file you're sending is not confidential, would you mind sharing it with me so that I can try to reproduce your recipient's issue? I will send you my email address privately.

Windows "Easy Connect" does not reply with the password / "Easy Connect is not Available"

Hello,
I have posted a related question some time ago, which was eventually resolved. However, after some time a problem with Easy Connect (used for MSRA) came back:
Whenever I arrive at the point in setting up a MSRA session where Easy Connect is needed, I get the reply: "Easy Connect is not Available". Here is an example of the problem:
Start MSRA
--> as expected, a window with "invite someone to help you" and " Help some who has invited you" appears
Select "invite someone to help you"
--> as expected, a window with "Who do you want to get help from" appears
Select "Invite someone to help you"
--> as expected, a windows with "How do you want to invite your trusted helper?" appears
Select "Use Easy Connect"
--> as expected, the temporary "Create invitation window / checking network capabilities" window appears
Next, I would expect this windows to close a new window to provide me with the Easy Connect password. However, instead I get the window "Easy Connect is not available".
I cannot continue. (I have screenshots so can repost with them if that would clarity my question)
Any suggestion how to resolve would be appreciated.
(Please do not reply with the 3 suggestions from the FAQ (both computers must run windows 7 / Access to internet is limited / your router does not support Easy Connect - doesn't help)
More background information and things I have tried:
The "Easy Connect is not available" window offers the "Tell me more about how to fix this problem" which I have tried, but those suggestions do not help
If I use the other MSRA option: "Help someone who has invited you" (this would be my typical use case), followed by "help someone new" and than select "Use Easy Connect", I also get the "Easy Connect is not available"
window instead of the expected option to enter the Easy Connect password. I believe this is that same problem.
This happed with both the 32 as well as the 64 MSRA versions
I'm using Window 7 Ultimate, 64 bit with all the latest updates
This desktop PC is wired to the internet via an Edimax gigabit switch, a Dlink DIR-855 wireless router and a fiber modem in bridge mode
The W7 desktop has a single active network connection only
I'm using Windows Firewall and Windows Security Essentials
Disabling the firewall on the PC did not help
Network discovery is enabled in Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings (that’s UPnP – right?)
The Internet Connectivity Evaluation Tool does not seem to be available anymore from MSFT sites
Restarting "Peer Name Resolution Protocol" did not help
Restarting "Peer Networking Identity Manager Properties" did not help
Starting up with a "Clean Boot" (disabled all non-Microsoft services using MSConfig) did not help
I would also be interested to understand how I can check on the status of the "Easy Connect" service. Is this a service hosted somewhere, or??
Thanks!

Dear Andy,
Thanks a lot for your reply. Let me answer your questions:
Q: Could you use the other methods: save this invitation as a file and use e-mail to send invitation?
A: yes, that way I can establish a MSRA connection
Q: Have you disable other network connections, including disable all virtual network card?
A: if I check with ‘Device Manager/Network Adapters’ (or Control Panel/Network and Internet/Network Connections) I see two network adapters (my Asus motherboard has two network connectors). Both are available, but only one is used. I have
disabled one. Unfortunately, this does not solve the problem. I will leave it disable for now.
Q: To find detailed information about this issue, please locate to event view and find the logs about remote assistance.
A: I have to admit that the Event Viewer is unfamiliar territory for me. So, I’m not sure where and what to look for. However, as suggested, I found "Event Viewer (local)/Applications and Services Logs/Microsoft/Windows/Remote assistance/Operational".
Each time, I attempt to use MSRA/Easy Connect, it seems two entries are added. As I cannot seem to upload files with this post, here are just the two entries:
“Diagnosis Repro Attempt resulted in a failure.”
“Remote Assistance troubleshooting has confirmed the problem: Remote Assistance Easy Connect isn't available.”
If you need more details, please suggest what to forward or check. I'm eager to find a solution!
W.

I updated to Yosemite. iPhoto says I need to update to the latest version. The app store says the version I need is not available in the US. Thus iPhoto won't work or even open at this point

I updated to the yosemite system. My iPhoto says I need to update to the latest version for it to work with yosemite. The app store searches and then states the version I need is not available in the US. Currently I cannot use iPhoto. Suggestions?

Csound1,
Thanks for the hint about not emptying the trash. I will try to work on this tonight or tomorrow morning and let you know if "this helped me".
Russell,
If you go into the iLife support forum for iPhoto, there are a couple good threads. Basically, iPhoto can't be downloaded by anyone anywhere in the world unless the app store has it listed in your "purchases" list. The threads contain a lot of steps and it looks like this could be difficult for novices like me.
Rysz,
I will also look at the link you provided before I get started. Thanks.

"The requested resource (/hello) is not available" Error of Servlet

Hello all,
I get HTTP STATUS 404 Error which states "The requested resource (/hello) is not available" even thought according to me I am doing everything perfectly.
Here is more information. If you can find out where the proble might be please
let me know because I am working on this for more than 9 hours.
I AM USING-<br>
TOMCAT 5.5.26 <br>
JRE 6 <br>
J2SDK 1.4.0 <br>
</B>
<BR><BR>
SYSTEM VARIABLES :<br>
<B>
CLASSPATH
</B>
C:\apache-tomcat-5.5.26\common\lib\servlet-api.jar <BR>
<B> JAVA_HOME</B> D:\j2sdk1.4.0
<BR>
<B>JRE_HOME</B> C:\Program Files\Java\jre6
<BR>
<B>TOMCAT_HOME </B>C:\apache-tomcat-5.5.26
<BR>
<P>
I have placed my hello.class file inside
<b>C:\apache-tomcat-5.5.26\webapps\ROOT\WEB-INF\classes</b>
also, i have modified web.xml file as<br>
<b>
<servlet>
<servlet-name>hello</servlet-name>
<servlet-class>hello</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>hello</servlet-name>
<url-pattern>hello</url-pattern>
</servlet-mapping>
</b><br><br>
But still I am not able to access my servlet when i type
http://localhost:8080/hello
I get the error I mentioned above.

Hi..Thanks for all those who have replied earlier. I feel I should add some more information.
I dont know what PACKAGE NAME you are talking about
I am pasting contents of my XML file located in :
**apache-tomcat-5.5.26\webapps\ROOT\WEB-INF\web.xml**
-->
- <web-app xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd" version="2.4">
<display-name>Welcome to Tomcat</display-name>
<description>Welcome to Tomcat</description>
- 
- <servlet>
<servlet-name>org.apache.jsp.index_jsp</servlet-name>
<servlet-class>org.apache.jsp.index_jsp</servlet-class>
</servlet>
- <servlet-mapping>
<servlet-name>org.apache.jsp.index_jsp</servlet-name>
<url-pattern>/index.jsp</url-pattern>
</servlet-mapping>
- 
</web-app>
web.xml file located in
apache-tomcat-5.5.26\webapps\servlets-examples\WEB-INF
is given below:
<?xml version="1.0" encoding="ISO-8859-1"?>

<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
version="2.4">
<display-name>Servlet 2.4 Examples</display-name>
<description>
Servlet 2.4 Examples.
</description>

<filter>
<filter-name>Servlet Mapped Filter</filter-name>
<filter-class>filters.ExampleFilter</filter-class>
     <init-param>
     <param-name>attribute</param-name>
<param-value>filters.ExampleFilter.SERVLET_MAPPED</param-value>
     </init-param>
</filter>
<filter>
<filter-name>Path Mapped Filter</filter-name>
<filter-class>filters.ExampleFilter</filter-class>
     <init-param>
     <param-name>attribute</param-name>
<param-value>filters.ExampleFilter.PATH_MAPPED</param-value>
     </init-param>
</filter>
<filter>
<filter-name>Request Dumper Filter</filter-name>
<filter-class>filters.RequestDumperFilter</filter-class>
</filter>

<filter>
<filter-name>Set Character Encoding</filter-name>
<filter-class>filters.SetCharacterEncodingFilter</filter-class>
<init-param>
<param-name>encoding</param-name>
<param-value>EUC_JP</param-value>
</init-param>
</filter>
<filter>
<filter-name>Compression Filter</filter-name>
<filter-class>compressionFilters.CompressionFilter</filter-class>
<init-param>
<param-name>compressionThreshold</param-name>
<param-value>10</param-value>
</init-param>
<init-param>
<param-name>debug</param-name>
<param-value>0</param-value>
</init-param>
</filter>

<filter-mapping>
<filter-name>Servlet Mapped Filter</filter-name>
     <servlet-name>invoker</servlet-name>
</filter-mapping>
<filter-mapping>
<filter-name>Path Mapped Filter</filter-name>
     <url-pattern>/servlet/*</url-pattern>
</filter-mapping>





<listener>
<listener-class>listeners.ContextListener</listener-class>
</listener>
<listener>
<listener-class>listeners.SessionListener</listener-class>
</listener>

<servlet>
<servlet-name>CompressionFilterTestServlet</servlet-name>
<servlet-class>compressionFilters.CompressionFilterTestServlet</servlet
-class>
</servlet>
<servlet>
<servlet-name>hello</servlet-name>
<servlet-class>hello</servlet-class>
</servlet>
</servlet>
<servlet>
<servlet-name>HelloWorldExample</servlet-name>
<servlet-class>HelloWorldExample</servlet-class>
</servlet>
<servlet>
<servlet-name>RequestInfoExample</servlet-name>
<servlet-class>RequestInfoExample</servlet-class>
</servlet>
<servlet>
<servlet-name>RequestHeaderExample</servlet-name>
<servlet-class>RequestHeaderExample</servlet-class>
</servlet>
<servlet>
<servlet-name>RequestParamExample</servlet-name>
<servlet-class>RequestParamExample</servlet-class>
</servlet>
<servlet>
<servlet-name>CookieExample</servlet-name>
<servlet-class>CookieExample</servlet-class>
</servlet>
<servlet>
<servlet-name>SessionExample</servlet-name>
<servlet-class>SessionExample</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>CompressionFilterTestServlet</servlet-name>
<url-pattern>/CompressionTest</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>HelloWorldExample</servlet-name>
<url-pattern>/servlet/HelloWorldExample</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>RequestInfoExample</servlet-name>
<url-pattern>/servlet/RequestInfoExample/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>RequestHeaderExample</servlet-name>
<url-pattern>/servlet/RequestHeaderExample</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>RequestParamExample</servlet-name>
<url-pattern>/servlet/RequestParamExample</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>CookieExample</servlet-name>
<url-pattern>/servlet/CookieExample</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>SessionExample</servlet-name>
<url-pattern>/servlet/SessionExample</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>hello</servlet-name>
<url-pattern>/servlet/hello</url-pattern>
</servlet-mapping>
<security-constraint>
<display-name>Example Security Constraint</display-name>
<web-resource-collection>
<web-resource-name>Protected Area</web-resource-name>
     
<url-pattern>/jsp/security/protected/*</url-pattern>
     
     <http-method>DELETE</http-method>
<http-method>GET</http-method>
<http-method>POST</http-method>
     <http-method>PUT</http-method>
</web-resource-collection>
<auth-constraint>

<role-name>tomcat</role-name>
     <role-name>role1</role-name>
</auth-constraint>
</security-constraint>

<login-config>
<auth-method>FORM</auth-method>
<realm-name>Example Form-Based Authentication Area</realm-name>
<form-login-config>
<form-login-page>/jsp/security/protected/login.jsp</form-login-page>
<form-error-page>/jsp/security/protected/error.jsp</form-error-page>
</form-login-config>
</login-config>

<security-role>
<role-name>role1</role-name>
</security-role>
<security-role>
<role-name>tomcat</role-name>
</security-role>


<env-entry>
<env-entry-name>minExemptions</env-entry-name>
<env-entry-type>java.lang.Integer</env-entry-type>
<env-entry-value>1</env-entry-value>
</env-entry>
<env-entry>
<env-entry-name>foo/name1</env-entry-name>
<env-entry-type>java.lang.String</env-entry-type>
<env-entry-value>value1</env-entry-value>
</env-entry>
<env-entry>
<env-entry-name>foo/bar/name2</env-entry-name>
<env-entry-type>java.lang.Boolean</env-entry-type>
<env-entry-value>true</env-entry-value>
</env-entry>
<env-entry>
<env-entry-name>name3</env-entry-name>
<env-entry-type>java.lang.Integer</env-entry-type>
<env-entry-value>1</env-entry-value>
</env-entry>
<env-entry>
<env-entry-name>foo/name4</env-entry-name>
<env-entry-type>java.lang.Integer</env-entry-type>
<env-entry-value>10</env-entry-value>
</env-entry>
</web-app>
My program hello.java is given below
import java.io.*;
import javax.servlet.http.*;
import javax.servlet.*;
public class hello extends HttpServlet {
public void doGet (HttpServletRequest req,
HttpServletResponse res)
throws ServletException, IOException
PrintWriter out = res.getWriter();
out.println("Hello, world!");
out.close();
}

The folder you selected is not available

Hi,
We have Ex2010 and Outlook 2010. When we send calendar sharing invitation to one of user and she try to open it or do YES OR NO...the following error pops up
The folder you selected is not available
It is working fine in OWA but not in outlook. Tried to change profile, tried on different computer but same error. What is wrong?
Hasan

Hi Hasan,
Please select the recipient from Globle Address List (GAL) instead of autocomplete list. Then re-send the calendar sharing invitation to have a try. For detailed information, please refer to:
http://www.slipstick.com/outlook/sharing/folder-sharing-available-error/
Regards,
Winnie Liang
TechNet Community Support
Hi Winnie,
This is not working. Same error.
Hasan

With PS 7 create new Place two objects on the new file then you may cut copy and paste Cs2 create new place two object on the new file Cut is not available how does one cut and paste in new file

With PS 7
create new
Place two objects on the new file
then you may cut copy and paste
Cs2
create new
place two object on the new file
Cut is not available how does one cut and paste in new file

If your using File>Place then photoshop cs2 creates what's known as Smart Objects, which photoshop 7 didn't have.
In photoshop cs2 you can rasterize the smart objects and that should make the Cut function available.
Select both placed layers, right click on the area to the right of the tumbnail and select Rasterize Layers.
If in photoshop cs2 you to Help>Photoshop Help and look under Layers>Smart Objects, that should give you a good overview of what smart objects are.

Office 2013 and SharePoint 2013 server properties - The required term set is not available.

Hi,
After creating new document from ribbon with the new document function on any template the managed metadata based server properties cannot be selected and properties boxes are grayed out. Mouse over displays "The Required term set is not available".
Works fine when using it form resource (SharePoint) domain both with user domain and resource domain accounts.
There is a two-way trust btw domains.
SPNs are done for AppPools.
AppPool accounts have delegations and are set to impersonate with GPO.
SharePoint Web Application is on kerberos authentication.
There is no difference when sites are using user or resource domain AppPool accounts.
The WFE and SQL Server have computer delegations.
Server env: Windows Server 2008 R2 with all updates, SQL Server 2008 R2 with all updates, on-prem SharePoint Server 2013 with no CU.
User env: Windows 7 ENT, IE10 and Office 2013 with all updates.
There is no internet connection and internet connection is not possible. The internet connection is cheated with two DNS A record setting for
www.msftncsi.com and dns.msftncsi.com. Also registry changes "ActiveDnsProbeContent" ip- address for Win7 is done via GPO to private IP. This is done because otherwise check-in/check-out does not work.
Last things on IIS log are:
2014-01-24 10:38:36 192.168.n.n PROPFIND /TestDoc - 5445 0#.w|userdomain\test3-user 192.168.51.51 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 207 0 0 639
2014-01-24 10:38:37 192.168.n.m OPTIONS / - 5445 0#.w|userdomain\test3-user 192.168.51.51 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 842
2014-01-24 10:38:54 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 15
2014-01-24 10:39:25 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 0
2014-01-24 10:39:56 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 15
2014-01-24 10:40:27 ::1 POST /_vti_bin/sharedaccess.asmx - 5445 - ::1 Microsoft+Office+Word+2013+(15.0.4551)+Windows+NT+6.1 200 0 0 15
What I missed.
Br,
-timo-

Same problem here!. Giving the computer network access allows the control to be populated. Then I disabled and restarted and it seems to be ok....

I am trying to install windows on my mac via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available.

I am running OSX 10.6.8 Snow lepard I am trying to install windows on my intel imac 20in late 2006 via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available. I bought the Imac secend hand and did not get the install dvd's with it What can I do?

You don't need to download the Windows support software, because in Snow Leopard, they are only available as a download for the Late 2010 MacBook Air.
Instead, you have to buy Mac OS X Snow Leopard. The Snow Leopard disc contains the Windows drivers for your Mac, so you have to install them after finishing the Windows installation

I'm trying to load video file into CS6 I keep getting error message: 'Could not complete you request because the DynamicLink Media Server is not available.' No Idea what to do next. Help please.

I'm using CS6 Extended. My OS is "Windows 7 home premium.
Can no longer load video files into CS6 for edited I keep getting error message:
'Could not complete your request because the DynamicLink Media Server is not available.'
Don't know what this means. Until just now I was able to load videos without any problems. Now I'm getting this message. Any thoughts?

Hi Mylenium,
upfront:
I hope I won't be marked as spam now, since I am posting on a few relevant discussions now to this topic.
However, I really would like to ask the people who have experienced this problem to see if they were able to solve it.
Now the real deal:
I posted a question in this discussionDynamicLink Media Server won't let me import video for video frames to layers anymore.
The linked discussion is a lot younger, which is why I posted there first.
I also put in information on the steps that I have tried and my computer specifications.
I am experiencing this problem for a while now and hope you and jones1351may be able to help out.

How to populate the Language Key description is not available

Hi,
Question: How to populate the Language Key description is not available in the Customer text table
The problem is ;
Customer no : 0012345
For this Customer no description is maintained only in EN, JA ,FR from R3 side.
EN : HP International Ltd
JP:HP の国際的な株式会社
FR: Ltd International de HP
There is no value for Language ES.
BW side:
User is login into language Key ES and executing the report based on this Customer no. There is no Customer text value maintained in language Key ES. It should populate the text value empty. BW system - Language ES is installed.
I have a Reporting requirement is - I need to populate the text value for this customer No: HP International Ltd when the user login to language Key ES and execute his reports.
/BI0/TCUSTOMER Customer text table I am able to see the description for the EN, JP, FR text values.
EN: HP International Ltd
JP: HP の国際的な株式会社
FR: Ltd International de HP
If the Customer text is not available in the text table of customer for language key ES - I have to populate the any one of the existing customer text values into the language key ES - example
0012345 ES HP International Ltd
Simplest solution if we maintained ES customer description in R/3 should be ok.
Is their any other logic which I can implement in BW.

Hi,
If you are opting to load Customer Text, there are two options:
1. R/3 maintained.
2. Generic Extraction using Flat Files.
Hope it helps..
Regards,
GPK.

MM/ MB01 goods entries : the field WEMPF (recipient) is not available.

Similar Messages

Maybe you are looking for