MM period extention

Hi Friends,
I have one requirement from the client.
My current period is April, as we know system allows any MM posting in March and april only. We have missed few transactions of Feb. Is it possible to extend the posting period from the current posting period of only 2 months?Is there any option in customizing to increase the posting periods for inventory from 2 months to 3 months????
Your early response will be highly appreciated.
Thanks & Regards
Satya

Hi,
MMRV: to check which period is open & also set back posting allowed,
MMPV: to open the period.
It is possible to re-open a previously closed period. However, it is NOT advisable to do so because the valuation data of the previous period could be affected.
In general, it is only safe to reopen a previously closed period when no material postings have been done after the period shifting to the new period.If there has already been a posting after the period shifting to the new period, reverting the period back will cause database inconsistencies in the history tables.
If you decide to proceed with this process, you can use the program RMMMINIT, but, please review the documentation of this program first!! and the check the SAP notes 487381 (for the error message that you are receiving) and the 369637 (for an explanation about the inconsistencies that will be generated.
Thanks,
AMIT

Similar Messages

Valid period date of Cost Element

hi,
i have problem in cost element.actually my fiscal year is Jan.1.2011 to Dec31.2011.i create some cost element in 01012011 to31122011 (valid period )this period is system allow to enter the transaction.but i create some cost elements in 01.09.2011 to 31.12.2011(valid period) this period is not allowed.system showing error message.ie cost element valid period extented.
finally my question is How to Change the Cost Element Valid period from 01.09.2011 to 01.01.2011.?can you help me this problem.
thanking you.,
Regards,
P.Pratap

It will allow! I just tried it. Make sure you have the validity from to (in the initial screen of KA01) as I stated below - 01/01/2011 to 31/08/2011. Also, check in table CSKB what are the validity periods for your cost element(s).

CAN we upload data periodically in LSMW?

HI Expert,
                 In LSMW , maintain object attributes step , there is periodic option if we select that option then would the data transfer periodically?How does it differ from periodic in BDC?
LSMW we can not schedule updation write?
we have extracting data from legacy system into flat file
now we want to map legacy format data into inputfile ( sap format data). how could we do that?
Further i have to use BAPI to upload

To a limited extent, the LSM Workbench also supports periodic data transfer. Preconditions are:
u2022     The LSMW object has been created and tested completely.
u2022     The "source application" periodically makes available one or several files on the SAP application server.
u2022     The LSMW object does not access files on the frontend. (Files on the frontend cannot be read in batch mode.)
If all these conditions are met, you can set select button "Periodic" in step "Maintain object attributes". Then, step "Control program for periodic data transfer" is displayed in the overview of work steps. This program carries out the following steps in sequence:
     Read data
     Convert data
     Import data
This program (name: /SAPDMC/SAP_LSMW_INTERFACE) can be used according to your requirements.

After renaming a file extention from .jpeg to .jpg I can no longer type ...

After renaming a file extention from .jpeg to .jpg I can no longer type in any of the finder related editable fields/boxes. I can still type in my open applications fields.
This problem also happens when I happen to find a file that has been named, for instance, 2008jpg. When I add the period to have the file read correctly as 2008.jpg, a warning box appears asking - {*Are you sure you want to change the extention from ".jpeg" to ".jpg"?* If you make this change, your document may open in a different application.} Two radio buttons are available within this warning box that read - 1 - {Use .jpg}(it is not color coded, which means it must be selected manually. - 2 - {Keep .jpeg}(it is colored w/my Blue highlight color, which means it will be selected if the Enter Key is used.
The warning box does Not appear if I remove the period from a file and not again when i re-add the period to that same file.
After trying to make these types of edits to the name of any file, with any of the various extentions available for files in our digital world, I usually get an anomaly where myability to type in the Finder ceases to be a possibility.
I have found that I can Force Quit the Finder for a quick fix, but, I'm not sure that this Typing problem should have to be dealt with at all by this quick fix. Is this an issue with the Indexing in Spotlight, which seems to be giving many users problems?

I downloaded and tried EasyFind. It works but it took 30+ seconds to complete finding 3 files that are on One of my Five 25+ Gb partitions of my 130 Gb Seagate Cuda(Really 160 Gb, but my Sawtooth will only recognize 130) I figured that if I ever got a better box, I could reformat it to see the whole 160 Gb. So, as far as I can see, Spotlight's indexing scheme which finds the files instantly is probably preferable. Spot light allows you to rename your files from within it's app window. I've always thought that was pretty powerful. Could my doing so be causing me any issues? As i said it is the inability to Type in the Finder that seemed to be caused from changing file Extentions that were mis-written. Maybe it was a delayed reaction to my renaming files in the Spotlight app? I've done both on occasion.
As for these .DS_Store files. Apparently you can NOT stop them from being written to any folder that you touch/open/view during a days session. But, as a function of the OS, are the essential to have in their respective folders Forever? I've looked at the .DS_Store terminator app briefly and assume that getting rid of these files won't hurt the regular operation of my OS. They will just be re-written if I ever have to go back to any particular folder again. But, apparently, some have said that if the plan on burning a CD or DVD of their data, they delete the .DS_Store files first and then do the burn.
I'm thinking from your having suggested this tremination app that you suspect that my having all of these ,DS_Store files could be a situation where any of them could have become corrupted and terminating them regularly should be part of my regular maintenance.
Does that sound like I'm understanding what I can do?
TIA

Message tracking log - time period

Hi,
How long are message tracking logs keeped on appliance?
How can i control message tracking logs.
Lots of HDD space available and I want 3 months of available Message Tracking logs.
When are Message traking logs deleted from the appliance?

Message tracking is based on the drive space available on the ESA appliance.
It is not possible to configure the # of days for retention of message tracking data. The set HDD storage allocation for message tracking data is limited. HDD storage allocation is set based on the hardware:
C1X0: 10G
C3X0: 20G
C6X0: 50G
X10X0: 50G
Your best solution in order to store mail logs/message tracking - would be to also have configured to store the mail_logs off to a syslog server --- that way you can determine the full extent/length of the retention period. (And also allows you to search/manipulate all mail_logs with a little easier access that may be available on the ESA.)
Hope that helps!
-Robert

Sql query to find out the space issues in not able to allocate next extent

hi,
i have oracel 11g on linux.
my datafiles are autoextend off. i am looking for query to make sure the segments does not stop growing by reaching the maximum segment allocated or no free contigous space available in allocating new extent,.
i need to know periodically the owner,object_name and object type (table or index) which are suffocating for space.
any ad-hoc sql query exists?
thanks in advance.

Connect as sysdba and try..
To list all objects >100M in size.
SQL> select owner, segment_type, segment_name, sum(bytes)/(1024*1021) from dba_segments
group by owner, segment_type, segment_name
having sum(bytes)/(1024*1021) > 100
For tablespaces ..
select tablespace_name, sum(bytes) tablespace_size
from dba_data_files
group by tablespace_name
union all
select tablespace_name, sum(bytes) tablespace_size
from dba_temp_files
group by tablespace_name
order by tablespace_name

Periodic Journals with impact in flow and balance accounts

Hi
We want to pass Journals in HFM on periodic basis (zero view of adjustments set to periodic). This will enable a journal passed in Month 1 to have impact for all months in YTD terms.
The issue that comes up is as follows:
- There are some Journals which have one leg in Flow and the other leg in Balance type accounts.
- So in subsequent months, we have a proper YTD figure for the FLOW account, but the balance account does not have the impact as required as BALANCE accounts do not carry fr the adjustements frm previous months like FLOW accounts
- This leads to an imbalance in Balance sheet to that extent.
Have ppl faced this issue and how can it be sorted.
To sort this, we have made all adjustements YTD and post recurring journals. But this creates a lot of journals to be posted and isnt an optimum solution.

Hi
This means there has to be a a movement created for all balance sheet accounts.
all journals get posted to the movement part in custom giving the closing balance for the GLs from journals.
This closing balance is then added to the normal upload balances to arrive at net total.
Rt?

Reg:Tax code validity period

Hi All
For the condition type jmop for the key combination tax code i'm not getting the validity period
I have checked the
1. condition type jmop (val dt from & Val dt To)
2.access secequence
In Fv11 i'm not getting it
Plz guide me

> 1. How to check tax code validity period?
No tax code doesn't have any validity period
But when we maintain condition record for tax calculation that condition record has validity period which we maintain in FV11
> 2. Is condition records mandatory for calculation of taxes.
If you are working with TAXINN which is condition record based tax procedure maintenance of Condition record is mandatory
With formula based TAXINJ procedure no need to maintain,
For more on this Topic read
http://wiki.sdn.sap.com/wiki/display/ERPLO/DifferencebetweenTAXINJandTAXINN
If this is mandatory , then how tax calculated for non material master items?
It all depends what access sequence you have assigned to your tax condition type
Lets take an example for Excise duty which is determined at material level
Ex1 >Condition type for Basic Excise duty is JMOP here we assign access sequence JTAX
Now to maintain condition record for JMOP you will find material,vendor.Plant (all defined in access sequence JTAX)
Ex 2>Now Say service tax condition type JSER (or what ever) which is not dependent on Material (as even Po without material master can have service tax)
So for service tax condition type we assign access sequence as MWST
which is defined only at country level
You can find all these settings under T.code OBYZ
I hope it clarifies your doubt at least to some extent
Revert back for any further clarification

Suitable Apple Extention for a PC video

I own a CD Rom of a video that can only be opened by WIndows 95 or higher, PC format only. It is part of a course on vocal improvement. A friend has a PC, and thinks he can copy the video for me, but he is not current with Apple requirements, and has asked me to tell him an extention to save it, then he can duplicate it for me.
I really don't think it will play on my iMac. I can open the CD itself for the lists, and the items that will not open - are called: vssver.scc and autorun.inf and browsercall.exe
I think my question is - I need to know the letters to put after the period, that Apple can run, like 'exe' above. What does Apple use. My PC friend called this an extention.
Thanks

.EXE files are simply like Mac OS X applications, but designed only to run in Windows.
What you need to know is the CD format, and the document format of the video, and version of the document format. If you know those three, you know what will allow a Mac to read it. See my FAQ*:
http://www.macmaps.com/macosxnative.html#WINTEL
Unfortunately the iMac G5 will have a hard time running .EXE files due to the requirement for emulation. Video files that have no DRM are usually pretty easy to convert to a format the iMac G5 will read. CDs of the Joliet format are not as easily read as ISO 9660 CDs. A FAT16 or FAT32 flash drive should mount on the iMac G5 just fine.
The SCC file is a file that can be read by a program called Annotation Edit:
http://www.versiontracker.com/dyn/moreinfo/macosx/31486&vid=528692
You'll need the video of the file converted to Windows Media version 9 or earlier without DRM or Quicktime.
Contact the developer of Annotation Edit to see if they can help with this conversion.
- * Links to my pages may give me compensation.
Message was edited by: a brody

.eps file extention missing

Hello: I have a pc with Windows 7 Home Premium Edition, 64 bit and a Raedeon (<sp?) processor.
Recently I downloaded a trial period for Adobe Photoshop CS6.
I made a New Folder when I downloaded the software ~ if that means anything. Please bare with me as I am a New Newbie to computers in general as well as Ps.
My problem is that I need to save files as .eps but when I go to Save As it is not listed. I checked the list of extensions and Ps does have it available. So, I am beside myself wondering why it is not in my drop down list of extensions.
Maybe something isn't pointing to something?? lol .... yup, that's the extent of my computer knowledge.
I have searched the FAQ's to no avail. However, I am not certain I have been asking my question in a manner in which I would be able to narrow down a relative result. So, I am sorry if someone else has already asked this question.
Your time is greatly appreciated.
Thank You!
Murph

Glad it worked out for you, yes there is a lot to learn and I have been using Photoshop since version 5 - long before CS5 and learn something all the time.
I always save my master with all the layers and channel, then flatten the image, and in some instances have to check to see if there are any alpha channels floating around. I use one application outside of Photoshop that dumps an Alpha Channel, it is supposed to be there to help cover up stitching errors, so that gets dumped as well. Then I save as a new file ready for the customer. I learned the hard way sending a client an image with all the layers intact, and my hard work and technique went out the door, when the client sent the image to someone else; usually my output is 16 bit TIFF.
Well sounds like you are having fun, and this forum is great for getting answers
Cheers
MK

Every time I start up Firefox, it always prompts me to reisntall the same pile of add-ons and extentions; I install them; still happens; why?

Regarding Firefox 16.0.2. Every time I start up Firefox, especially after a period with my comp in standby mode, I am always asked to install several add-ons and extentions. Always the same ones, and always several. I install them, again and again, yet I am still always prompted to reinstall every time I start Firefox. I've always had this batch installed, but I don't know why it keeps telling me to reinstall them.

Some security software has virtualization or sandbox features that may cause problems by protecting and restoring files in the Firefox profile folder.
It is possible that there is a problem with the file(s) that store the extensions registry.
Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.org/kb/Profiles
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.org/kb/Unable+to+install+add-ons
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to check if there is a compatibility update available.
If this hasn't helped then also try to delete the addons.sqlite file.
If you do not keep changes after a restart then also see:
*http://kb.mozillazine.org/Preferences_not_saved

Import and/or export for actionscript without extention?

I have a project in which I need to import several hundered png images.
When I import them into the library, then select all the images, then view the properties, I Check the export for action script and the export in frame 1.
Now, all my images have class names that I can access though my code, however, it included the file extensions in the class names, thus making invalid class names.
Is there any way I can import and/or set class names so they do not include the file extensions without having to do it manually for EVERY file?

My actual project has something like 9200 images in it.
if my main project, let's call it "main.fla", was to contain every one of those images, every time I tried to run or debug it, it would take FOREVER to compile... as a work around that I discovered in a previous project was to put all my graphics and media into an swc file. (Let's call it MyLibrary.swc)
While I was trying to get the swc working, I discovered that while my media in the swc was indeed setup to be exported for actionscript with unquie classes and everything, when I compiled and built my project, I could not get any of those media elements using the getDefinitionByName function.
After alot of reading and trail and error I found that the only way to get it to work was to have someplace in my code, an actual reference to the objects that I was trying to get with getDefinitionByName. It turned out, that without instantiating the object in the code, the compiler was omitting it.
Now, but instantiate, I mean doing this:
var bm:BitmapData = new MyImage();
Where MyImage.png is in my swc and has a class defined as "MyImage"
Once I do that, then I can do this
var classRef:Class = Class( getDefinitionByName("MyImage") );
But without that line above SOMEWHERE in my code (even if it's not actually executed), the getDefinitionByName returns an error saying it can't find the class.
Now, here's the problem.
When I import all my images into my swc library they get named with the file extention... "MyImage.png" and when I select all the images that Imported and batch set the export for actionscript, they get automatically assigned a class name equal to their library name, so the class name is "MyImage.png"
so if I wanted to use getDefinitionByName to access the class, I would need to instantiate it in my code by doing this:
var bm:BitmapData = new MyImage.png();
BUT, that is erronous as the period causes an error and the adobe docs says right in it that class names can't use periods or any other non-alphanumeric character.
So while the getDefinitionByName function DOES actually work with classes with periods in them, because my media is external of the main.fla, I can't load it unless it's instantiated first, which leaves me right back where I was.... having to to manually rename over 9000 classes manually one at a time.
I did some searching and found the "Flash Library Renamer" extension, but it requires me changing all my class names to be sequenial, which the vast majority is not.
Is there a way that I can import the files into the library and have it omit the file extension?
if not, is there a way that I can set the class names in a batch and not have it use the file extentions?
if not, is there an Flash Extention or plug in that will allow batch renaming using regular expression or wildcards?

Tax code validity period

Hi,
1. How to check tax code validity period?
2. Is condition records mandatory for calculation of taxes.
If this is mandatory , then how tax calculated for non material master items?
Please advice.
Thanks

> 1. How to check tax code validity period?
No tax code doesn't have any validity period
But when we maintain condition record for tax calculation that condition record has validity period which we maintain in FV11
> 2. Is condition records mandatory for calculation of taxes.
If you are working with TAXINN which is condition record based tax procedure maintenance of Condition record is mandatory
With formula based TAXINJ procedure no need to maintain,
For more on this Topic read
http://wiki.sdn.sap.com/wiki/display/ERPLO/DifferencebetweenTAXINJandTAXINN
If this is mandatory , then how tax calculated for non material master items?
It all depends what access sequence you have assigned to your tax condition type
Lets take an example for Excise duty which is determined at material level
Ex1 >Condition type for Basic Excise duty is JMOP here we assign access sequence JTAX
Now to maintain condition record for JMOP you will find material,vendor.Plant (all defined in access sequence JTAX)
Ex 2>Now Say service tax condition type JSER (or what ever) which is not dependent on Material (as even Po without material master can have service tax)
So for service tax condition type we assign access sequence as MWST
which is defined only at country level
You can find all these settings under T.code OBYZ
I hope it clarifies your doubt at least to some extent
Revert back for any further clarification

Error while running a query-Input for variable 'Posting Period is invalid

Hi All,
NOTE: This error is only cropping up when I input 12 in the posting period variable selection. If I put in any other value from 1-11 I am not getting any errors. Any ideas why this might be happening?
I am getting the following error when I try and run a query - "Input for variable 'Posting Period (Single entry, mandatory)' is invalid" - On further clicking on this error the message displayed is as follows -
Diagnosis
Variable Posting Period (Single Value Entry, Mandatory) is used as a lower limit (X) and an upper limit () in an interval selection. This limit has the value #.
System Response
Procedure
Enter a different value for variable Posting Period (Single Value Entry, Mandatory). If the value of the other limit is determined by another variable, you can change its value also.
Procedure for System Administration

OK.
Well, if the variable is not used in any interval selection, then I would say "something happened to it".
I would make a copy of the query and run it to check if I get the same problem with period 12.
   -> If not, something is wrong in the original query (you can proceed as below, if changes to original are permitted).
If so, then try removing the variable completely from the query and hardcode restriction to 12.
   -> If problem still persists, I would have to do some thinking.
If problem is gone, then add the variable again. Check.
   -> If problem is back, then the variable "is sick". Only quick thing to do, is to build an identical variable and use that one.
If problem also happens with the new variable, then it's time to share this experience with someone else and consider raising an OSS.
Good luck!
Jacob
P.S: what fisc year variant are you using?
Edited by: Jacob Jansen on Jan 25, 2010 8:36 PM

Issue with Period Control 03 for Depri key MSTL with 6446

Hi Gurus,
We want to use mid-month calculation for Dep. key MSTL using period control 03 (i.e. 03/03/03/03). We are also using 6446 as year-depedent Fiscal year (i.e. Jan and Dec 6 weeks other rest 4 weeks). period control 03 is pro rata at mid period
period 12 for 2009 start 11/14/09 ends 12/25/09
period 1 for 2010 start   12/26/09 ends 02/05/10
as per period control 03 mid month is Dec-04-2009 (setup in OAVH)
When i acquire an asset on Dec-04-09, the dep start date is Nov-14-09 which is correct and all calculation is correct
however when i acquire an asset on Dec-06-09 the dep start date is still Nov-14-09 which is not correct infact it should start dep from next month which will be Dec-26-09 (This is 1st period of Fiscal year 2010)
As mentioned above we are using 6-4-4-6 fiscal year
When acquiring an asset with mid month concept at year end we are facing problem in depri start date and hence calculation.
The setting in OAVH for period control 03 are as below
FV   Period Control     Desc.                             Year   Month   Day    Period    MidMonth
NL        03              Pro rata at mid period          2009    12        4         12           ticked
NL        03              Pro rata at mid period          2009    12        25       12           ticked
NL        03              Pro rata at mid period          2009    12        31        1            ticked
NL        03              Pro rata at mid period          2010    1          15        1            ticked
Thanks in advance

Deepak,
Your period 12/2009 starts and ends between 11/14/09 ends 12/25/09. Now you acquire an asset on 12/4/2009. As per OAVH, you want depreciation calculation start mid-period. Then how is depreciation start date of Nov 14, 2009 for this case?
Then you acquire an asset on Dec6, 2009. This, as per OAVH, falls into period 12/2009. Then why should the calculation start from period 1/2010 for this case?
Thanks,
Asheesh

MM period extention

Similar Messages

Maybe you are looking for