MM PO Layout problem

Hello MM gurus,
I seem to have a peculiar MM issue which I am not able to figure out. Whenever I display a Purchase Order using ME23N in the QA system, I am able to see field column such as Tracking Number in the Item overview (not Item details). When i try to view the same PO in the Production system, i do not see that column at all.
I have already
a) Checked the customizing settings " Define Screen Layout at doc level" between QA and production. No Anomalies there. (I have checked NBF and PTOF field groups)
b) checked if there are any variants present in the PO layout - Everything Standard. No Variants at all.
c) Checked if is it because of any personalised settings in the PO and again could not find anything interesting there.
d) Checked prior postings for a similar problem in Sapfans and couldn't find any.
So my fellow MM'ers, any help that you could offer would be greatly appreciated.
Regards,
Arvind

Hello,
I had already tried whatever you had suggested. I cannot see the "Administrator" button when i login to Production. This could probably be an access issue. But what baffles me most is that when i view the settings in production by looking at the entries in TCVIEW table, the check in the Invisible column for this field (BEDNR) is not there. which means it is visible. But when i display in the PO it is not visible. I tried to very carefully hover my mouse over these fields so that i can catch it and expand it. But to no vain.
Regards,
Arvind

Similar Messages

  • CSS Layout Problem?

    Can someone please help me with a layout problem.
    As far as I can tell the page looks as it should in Netscape,
    Firefox, etc., but IE6 and 7 refuse to work correctly.
    The page I am working on is:
    http://www.vmtampademo.com/localangler/testpage.html
    Most of the picture caption and headline of the middle column
    is behind the picture. I attempted to force the info with a
    seperating div which seems to work sometimes. I doubt that this is
    the correct solution. What am I doing wrong?
    Thank you for the help!

    It looks fine in Firefox 2.0.0.1, Opera 9.10, and IE 7.

  • Layout problem in PDF conversion

    Hi all,
    i am downloading spool data using the function module CONVERT_ABAPSPOOLJOB_2_PDF. But i am facing layout problem. e.g. RFBILA00(financial statement generation program) has written balancesheet data to the spool. This spool data has some 6 columns. but CONVERT_ABAPSPOOLJOB_2_PDF is writing only first 3 columns to the generated PDF file. i used 'GET_PRINT_PARAMETERS' function module also with values like layout as 'X_65_132' and 'X_90_120'. but no success. if anybody knows the answer, please let me know.
    Thanks in advance,
    Naveen

    Hi All,
    i am following the below approach to download the information from spool.
    program/spool output is an ALV List output data having 8 columns. but below approach is converting only first 5 columns in to PDF format. other 3 columns are getting truncated.
    FUNCTION /ngl/download_spoolinfo_as_pdf.
    ""Local Interface:
    *"  IMPORTING
    *"     REFERENCE(I_SPOOL_REQUEST) LIKE  TSP01-RQIDENT
    *"     REFERENCE(I_FILENAME) LIKE  RLGRAP-FILENAME
    *"  EXCEPTIONS
    *"      DOWNLOAD_ERROR
      TABLES tsp01.
      DATA: mtab_pdf LIKE tline OCCURS 0 WITH HEADER LINE,
            mc_filename LIKE rlgrap-filename.
      DATA: mstr_print_parms LIKE pri_params,
            mc_valid(1) TYPE c,
            mi_bytecount TYPE i.
      CALL FUNCTION 'GET_PRINT_PARAMETERS'
        EXPORTING
          copies                 = '1'
          cover_page             = space
          destination            = 'locl'
          expiration             = '1'
          immediately            = space
          mode                   = space
          new_list_id            = 'X'
          no_dialog              = 'X'
          user                   = sy-uname
          line_size              = 200
          line_count             = 65
         layout                 = 'X_65_200'
          layout                 = 'X_90_120'
          sap_cover_page         = 'X'
        IMPORTING
          out_parameters         = mstr_print_parms
          valid                  = mc_valid
        EXCEPTIONS
          archive_info_not_found = 1
          invalid_print_params   = 2
          invalid_archive_params = 3
          OTHERS                 = 4.
      IF sy-subrc EQ 0.
        CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
          EXPORTING
            src_spoolid              = i_spool_request
            no_dialog                = 'X'
            dst_device               = mstr_print_parms-pdest
          IMPORTING
            pdf_bytecount            = mi_bytecount
          TABLES
            pdf                      = mtab_pdf
          EXCEPTIONS
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed  = 11
            OTHERS                   = 12.
        IF sy-subrc EQ 0.
          mc_filename = i_filename.
          DATA: lv_filename TYPE string.
          lv_filename = i_filename.
          CALL FUNCTION 'GUI_DOWNLOAD'
            EXPORTING
              bin_filesize = mi_bytecount
              filename     = lv_filename
              filetype     = 'BIN'
            TABLES
              data_tab     = mtab_pdf
            EXCEPTIONS
              OTHERS       = 22.
          IF sy-subrc EQ 0.
            WRITE:/ mc_filename, 'CONVERTED TO PDF AND DOWNLOADED'.
          ELSE.
            WRITE:/ 'PROBLEM WITH DOWNLOAD'.
            RAISE download_error.
          ENDIF.
        ELSE.
          WRITE:/ 'PROBLEM WITH PDF CONVERSION'.
          RAISE download_error.
        ENDIF.
      ELSE.
        WRITE:/ 'PROBLEM GETTING PRINT PARAMETERS'.
        RAISE download_error.
      ENDIF.
    ENDFUNCTION.

  • Layout problem - multiple repeating frames

    Hi, I have a layout problem, pls help!
    Short report description:
    - Repeating Frame1 - gives 1 record, contains all other frames, variable vertical elasticity
    - - Frame2 - contains all frames beneath - variable vertical elasticity
    - - - Frame3 - variable vertical elasticity
    - - - - some boilerplates
    - - - - Repeating Frame 2 - various number of records, fixed vertical elasticity, height 100
    - - - - Repeating Frame 3 - various number of records, fixed vertical elasticity, height 30
    - - - - .. other repeating frames ..
    When reaching the bottom of a page, and there is not enough room to print a record for Repeating frame 2, a record from Repeating frame 3 is printed in the bottom.
    Next page starts with the remaining records from Repeating frame 2.. and then the remaining records from Repeating frame 3.
    For example:
    Page 1:
    Rep frame 2 - Record 1
    Rep frame 2 - Record 2
    Rep frame 2 - Record 3
    Rep frame 3 - Record 1 -- not enough space to print Record 4, so this record is printed
    Page 2:
    Rep frame 2 - Record 4
    Rep frame 2 - Record 5
    Rep frame 3 - Record 2
    How can i ensure that all records from Rep frame 2 is printed before records from Rep frame 3?

    Hi, thanks for helping me out!
    I tried to use anchors, but they had no effect when connecting top of 3 to bottom of 2, got the same layout.
    I then tried to create frames with vertical elasticity expand around both rep frame 2 and rep frame 3, and it seems to do the job.
    - Repeating Frame1 - gives 1 record, contains all other frames, variable vertical elasticity
    - - Frame2 - contains all frames beneath - variable vertical elasticity
    - - - Frame3 - variable vertical elasticity
    - - - - some boilerplates
    - - - - Frame 4 - vertical elasticity expand
    - - - - - - Repeating Frame 2 - various number of records, fixed vertical elasticity, height 100
    - - - - Frame 5 - vertical elasticity expand
    - - - - - - Repeating Frame 3 - various number of records, fixed vertical elasticity, height 30
    and so on..
    Thanks again

  • Layout Problem in swings

    I have an Layout problem. My Applications consists of a label and a panel in which some more labels are present.
    The panel should contain the scrollbar in order to view all the label that excced the size of the panel.This label and a panel should be adjacent to each other.
    My problem is, I am not getting the scroll bar to the panel when I am adding the label that excced the size of the panel, when I am adding the label adjacent to this label.

    Did you use JScrollPanel? If not, use it.

  • [solved] layout problem in amarok 2.02

    Hi,
    Here, I have a bad layout problem with amarok 2.02. Amarok does not fit on my screen which is 1400 pixels large! I cannot reduce the part where the collection is shown. So that it is really unpractical to use.
    I uploaded a snapshot to illustrate the problem (it is the full screen!):
    emmanuelfavrenicolin.free.fr/Public/Sna … ok202.jpeg
    Someone have the same problem ?
    I tried to install svn version but I stopped after 3 hours of compilation, it is quite a big application.
    Last edited by manouchk (2009-05-23 06:28:43)

    Well, I tried amarok2-devel 2.0.90-1 but the problem of graphic layout remains similar, no improvement. Is it normall? Maybe amarok is only available for computer with screen >= 1600x1200  or is there an hidden configuration file where I could tweek this?
    Last edited by manouchk (2009-05-18 02:41:03)

  • Urgent: Layout problem in "light inner page"

    Hi Experts,
    I am facing a problem in portal content area on external facing portal. I see a vertical scroll bar which restricts application from being displayed on entire screen.
    I am getting this problem after a patching of EP 7.0, before patching every thing was running fine.
    To me it looks like a layout problem in "light inner page", When I use "Light - 1: column (Full width)" layout I get a vertical scroll bar on portal. When I use default layout then this vertical scroll bar disappears but I see an empty navigation bar on left side which is not required.
    Can some one advise a solution for this.
    -Lave

    hi,
    Similar problem in this thread. check it out
    Desktop inner page lost
    Regardss,
    Ganesh N

  • Div layout problem

    Hi - stuck on what I think should be a fairly basic layout problem:
    I have 2 divs, equal widths but varying heights, one floated to the left and one to the right so that they appear next to eachother on the page.  The one on the left contains varying amounts of text, the one on the right contains a flash player so never varies.
    Where the text for the left div is long, I want it to start off next to the player, but then flow beneath it rather than continuing downwards at the same width as the div.  If I remove the width of the left div, so that it reverts to the container width, the player div positions itself below it, so I can't work out how to get the effect.
    Can anyone help?

    Hi,
    hope I understood in the right way: I used (translated from German DW) "modify table" and so I got one more row and two columns in your Main_Content. In one of the new columns I copied the image and beneath I took the text (you now can replace with image and text of your choice), like this:
    If that's not a help for your question, please ask me again.
    What concerns the width of the pictures, I would format them with PS or a similar program in the same wide.
    Hans-G.

  • Design/Layout Problem in OOTB SP "Docs I'm following" page

    Hello
    The "Docs I'm following" My Sites page in SP 2013 has the following layout problem:
    Long document titles overlap with other elements (see also screenshot).
    Note: This is default SP, i.e. we have not deployed any custom branding.
    I guess this is a problem which can easily be corrected even without having to wait for a SP update. Since I'm not very good with design changes I would be grateful if you could provide
    us with a quick fix, e.g. an updated css file.
    Thanks a lot.
    Best regards
    John

    Hi  ,
    For your issue, you can add the following code into your MySite MasterPage:
    <script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
    <script type="text/javascript">
    $(document).ready(function () {
    $(".ms-contentFollowing-itemTitle a").each(function(i){
    $(this).text(shorten($(this).text(),32));
    function shorten(text,maxLength) {
    var ret = text;
    if (ret.length > maxLength) {
    ret = ret.substr(0,maxLength-3) + "...";
    return ret;
    </script>
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Using null Layout - Problems

    Hullo - I've written a little app that, because of the nature of what it does, prettymuch requires the use of null layout. It works well enough, but there are a few points where it does strange things that I don't understand. I haven't been able to find any good docs anywhere for how exactly layout/rendering works. The Swing tutorial, for example, almost completely ignores the topic.
    Basically, I set the layout to null, add my components, use setBounds...but then nothing happens. In order for anything to be visible, I have to call pack() before I call show(). What is pack? What does it do? How can Sun's null layout examples work even though most of them don't use it?
    Second, if I create JFrame of a certain size, and add a component that goes off the bottom of the JFrame (on purpose), then expand the size of the JFrame to reveal the bottom part of that component, it doesn't paint - there's just a grey area. No amount of repaint() pack() or anything will cause it to show. The only way I've found to do it is to make the JFrame larger to begin with, add the component so that it's visible, then resize to the smaller size, which is kind of ugly and clunky.
    I basically do not understand why Swing is doing the things it does; why it paints sometimes and not other times, where it paints, when it paints, where it shows objects, how it packs them, etc. I would be very grateful if someone could englighten me!

    Hullo - I've written a little app that, because of the
    nature of what it does, prettymuch requires the use of
    null layout. It works well enough, but there are a
    few points where it does strange things that I don't
    understand. I haven't been able to find any good docs
    anywhere for how exactly layout/rendering works. The
    Swing tutorial, for example, almost completely ignores
    the topic.
    Basically, I set the layout to null, add my
    components, use setBounds...but then nothing happens.
    In order for anything to be visible, I have to call
    pack() before I call show(). What is pack? What
    does it do? How can Sun's null layout examples work
    even though most of them don't use it?
    Second, if I create JFrame of a certain size, and add
    a component that goes off the bottom of the JFrame (on
    purpose), then expand the size of the JFrame to reveal
    the bottom part of that component, it doesn't paint -
    there's just a grey area. No amount of repaint()
    pack() or anything will cause it to show. The only
    way I've found to do it is to make the JFrame larger
    to begin with, add the component so that it's visible,
    then resize to the smaller size, which is kind of ugly
    and clunky.
    I basically do not understand why Swing is doing the
    things it does; why it paints sometimes and not other
    times, where it paints, when it paints, where it shows
    objects, how it packs them, etc. I would be very
    grateful if someone could englighten me!Okay, I think you should call setVisible(true); instead of pack then show. Pack basically organizes the components so they take up the least amount of room, and then it shrinks the frame to as small as it will go without hiding any components. It think if you call revalidate() instead of repaint(), should solve your problem.
    The other thing to do, is (hehe) make your own components

  • Help needed with a layout problem

    I'm trying to build a JTabbedPane where each tab has a grid of buttons. The number of buttons is variable, and I'd like the buttons to flow sort of like with FlowLayout, with four columns. I need all the buttons to be the same size, even across tabs. I tried GridLayout, which doesn't work when I have too few buttons to fill a row. It fails in different ways, depending on how I set things up. If I try to set the layout to GridLayout(0, 4) (four columns), then if one tab has one row and another has two, the buttons on the one-row tab expand vertically to the height of the two-row tab. If I try GridLayout(2,4), then if a tab has only one button, it expands horizontally to the maximum width of any of the tabs. (It also has the further problem that if the maximum number of buttons on any tab is 6, they are placed in a 2x3 array; I'm trying to get them to be 4 buttons on the first row and 2 on the second.)
    I'm hoping there's a standard layout manager that can do the job, but I'm not too familiar with the Swing manager classes. Can I get what I want without writing my own layout manager?
    Thanks,
    Ted Hopp
    [email protected]

    I didn't think it was specifically a Swing question.Well, its either Swing or AWT, people who develop GUIs are the ones who are going to have experience using layout managers.
    but if someone can point the way to how to do this with GridBagLayout, nested containersSince you finished reading the tutorial, what have you tried? You've explained your problems using a single layout manager, so what problems are you having using nested layout managers?
    If you need further help then you need to create a [Short, Self Contained, Compilable and Executable, Example Program (SSCCE)|http://homepage1.nifty.com/algafield/sscce.html], that demonstrates the incorrect behaviour.
    Don't forget to use the Code Formatting Tags so the posted code retains its original formatting. That is done by selecting the code and then clicking on the "Code" button above the question input area.

  • Help needed with Layout problem

    Hello everybody
    I need to insert components such as buttons in a JPanel using absolute positioning
    I still cant dot this
    even if I used the method setLocation for the component
    I wanna know if I have to change the default layout for JPanel or whatever
    thanks a lot

    i found this quite useful:
    http://java.sun.com/docs/books/tutorial/uiswing/layout/visual.html#border
    dont know if it will specifically help with your absolute positioning problem.

  • Layout problems in IE only

    Here's the portfolio I'm making: http://jakemakesthings.110mb.com/gallery.html
    It's my first website outside of Flash, and the only websites I will be making will be my own Portfolio's so I've made it with tables in the design view since I'm not capable of doing the whole thing in code.
    I've tested it in Chrome, Firefox, Safari and Opera and the layout seems fine - it's only when I test it in Internet Explorer 8 that the jump menu and image description are both pushed right down.
    I think that the problem may be with the cells since it's pushed down next to the thumbnails, which is where the cell had originally been split (the jump menu and description are both inside a merged cell).
    Any help is greatly appreciated, thank you.

    Try to add proxy via registry
    [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings]
    "ProxyEnable"=dword:00000001
    "ProxyServer"="10.35.60.137:8080"
    "ProxyOverride"="http://*.internal.lan;https://*.internal.com;<local
    or try to check this document below
    http://blogs.msdn.com/b/asiatech/archive/2014/05/12/how-to-apply-the-content-of-ie-settings-in-gpo-which-used-iem-ie-maintenance-before-ie10-to-ie10-version-since-iem-has-been-deprecated-begin-from-ie10.aspx

  • Layout problem in screen painter

    hi all,
            the screen is not appearing when i click 'layout' button in screen painter when i am enabling a wsp client proxy server. Is there any solution?

    some times SAP Gui behaves like this, in my case i faced this problem many times, some times after shutdown my sap logon pad. and restart the sap , go to se51 , it will open the Screen painter normally. But some cases i uninstalled the Gui, and re installed .then only it opens properly. select all components when installing.

  • Report layout problem

    i am facing very strange problem,
    some times in report layout the field ,frame etc movement not exactely accoring to the
    cursor movement(this happend only in some reports others work properly),
    due to this ,layout designing is difficult
    bye
    siddharth

    Hi,
    Please try with latest Report Ver 6.0.8.19.0. you will not face the problem.
    Thanks,
    Puvan.

Maybe you are looking for