MM: PO Not Picking up PR Having Multiple Line Items
Hi All,
When Creating PO with Reference to PR Having multiple line items, not picking up the line items and also the vendor and also the where in we have to select input tax code.
CASE1: Created PR 760001340 with single line item and also could able to create PO.
Case2: Created PR 760001341 with multiple line items, When creating PO with reference to PR the line items and Vendor are not picking Up.
Plz. Advise a solution.
Thanks in Advance.....
Regards
Sudheer
HI SHWN,
Thanks for prompt response.
ERROR Message: When referencing a requisition, please also enter a requisition item no.
Regards
Sudheer
Similar Messages
-
Single/ Consolidated GR/IR entry for a PO having multiple line items
Hi,
In a PO there are couple of line items for materials of similar type and class. While making the Goods Receipt, the Accounting Document is making two no of line items for GR/IR accounts as credit and two no of inventory accounts as debit. Same is happening to GR/IR account while making Invoice Receipt document also.
Informatively, both the materials above have been assigned to one GR/IR account in the OBYC table.
My question is, is it possible to consolidate the value of both these materials and post one line item for GR/IR account. This is required as in our case in a PO, normally, we do have multiple line items and hence it is resulting multiple no of GR/IR and inventory accounts in a single accounting document. As we are getting details of the line item from PO history, we do not require it in the accounting document.
Requested to kindly help.
Regards
B.MohantyHi
This is not possible (you will compleet los the link between the Invoice and GR)
The reason is that when you receive an invoice that this is based on a G/R line and the way arround when you receive first the invoice(s).
The system need this for the automatecly clearing from the G/R - I/R account, that is based on PO an PO line item number. -
Creation of Blanket PO having Multiple Line items using Bapi_po_create1
Hi
How to create a Blanket Purchase ordetrs using Bapi BAPI_PO_CREATE1. The PO has multiple line items.
Regards
LakshmanMaybe this will help:
[blanket purchase order (MM)|http://help.sap.com/saphelp_srm30/helpdata/en/35/26c019afab52b9e10000009b38f974/content.htm]
Rob -
Profit Centre not picking in customer and vendor line items
Hello
When we are posting the entries for customer and vendors and when i want to check the balances of customers & Vendors profit center wise it is not showing any balance but if i will check the same transaction in the P & L A/C it shows me the balance there Profit Center Wise
Can we please tell me where i have to maintain the settings so that i can get the balances of customers and vendors Profit Center Wise
SunilHello,
Unless you are on New GL with document splitting functionality, no items on vendor and customer will be posted with Profit Center.
You run 1KEK periodically to transfer the receivables and payables to PCA.
Regards,
Ravi -
Hi Gurus,
i am creating ecatt with TCD recording. My requirement is if i record a sales order with one line item can i use the same ecatt for multiple line items.
for example if i create a test script z_va01 in this i record a sales order having one line item. For this i created test data and configaration. Can i use same ecatt to create a sales order having multiple line items.
Thanks in advace
anilHi guys,
I know it has been a long time since this thread was opened, but I'm facing with the same problem.
I created the sales order with SAPGUI REC, and added a loop for line item creation and schedule line creation.
*LINE ITEM NUMBER
DO ( V_LNIT_NO ).
SAPGUI ( VA02_2010_STEP_2 ). --> Adding line item
V_LI_ROW = V_LI_ROW + 1.
ENDDO.
And i amended the line item selection Guielement ID - (Changes are in bold)
'wnd[0]/usr/tabsTAXI_TABSTRIP_OVERVIEW/tabpT\02/ssubSUBSCREEN_BODY:SAPLJ3AD:2930/ssubSUBITEM_L2:SAPMJ3AS:2001/tblSAPMJ3ASTCTRL_LINE_ENTRY/ctxtJ_3ASZDI-MATNR[3,<!V_LI_ROW!>]'
so that the loop will make the line item selection to the next line.
My requirement is to upload the data through a excel file, so I created a test configuration with the relevant variables. But the data from the excel line wont populate the loop data, it only repeats the data from the same line over and over again.
How can I fix this? Please help.
Ps - I have tried to make the the MATNR_D to a table by adding [], --> MATNR_D[] - Table. And it becomes a <INITIAL>, and by clicking on the value column cell, it goes in to parameter I_MATNR (I defined this)
and you can add Parameter 1, 2, 3 etc and within the parameter you can add table-line. I read that this is the solution but, the variable is not recorded on the excel sheet as a column. Please help -
How to use parallelism in RMAN script having multiple lines
Gurus,
Need your advice on using parallelism in 'BACKUP AS COPY DATAFILE' script having multiple lines.
I have a script like below:
CONFIGURE DEVICE TYPE DISK PARALLELISM 10;
backup as copy datafile '/data1/oradata/PROD/data01.dbf' format '+DATA';
backup as copy datafile '/data2/oradata/PROD/data02.dbf' format '+DATA';
backup as copy datafile '/data3/oradata/PROD/data03.dbf' format '+DATA';
backup as copy datafile '/data4/oradata/PROD/data04.dbf' format '+DATA'; and so on ......
If I run this script, it runs sequentially. How can I parallely copy the required data files ?
I have to selectively copy few files in ASM.
I want to use a single script.
Please advise.
Best regards,
Santosh
Edited by: 966454 on Oct 18, 2012 11:59 PM
Edited by: 966454 on Oct 18, 2012 11:59 PMUnfortunately, this will not help my case. It may not always be '+DATA'
I want to know if there is any way to parallelise the multiple statements.
Script may have :
CONFIGURE DEVICE TYPE DISK PARALLELISM 10;
backup as copy datafile '/data1/oradata/PROD/data01.dbf' format '+DATA1';
backup as copy datafile '/data2/oradata/PROD/data02.dbf' format '+DATA2';
backup as copy datafile '/data3/oradata/PROD/data03.dbf' format '+DATA3';
backup as copy datafile '/data4/oradata/PROD/data04.dbf' format '+DATA4'; ........
or
backup as copy datafile 1 as '/data1/oradata/PROD/data01.dbf' ;
backup as copy datafile 2 as '/data2/oradata/PROD/data02.dbf' ;
backup as copy datafile 3 as '/data3/oradata/PROD/data03.dbf' ; ........
Regards,
Santosh
Edited by: 966454 on Oct 19, 2012 12:33 AM -
Multiple line items not coming in ME91F
Hi All,
I am facing a problem while doing ME91F for urging letters to vendor. I am maintaining multiple line items in PO but in ME91F PDF it is not coming multiple items, it is showing only single line item, Please help.
ThanksHi,
Cross check PDF/Smartform assigned to your PO message type and find logic on available in PDF/Smartform for showing line items in PO( discuss with ABAPer).
Also cross check other line items where material involved(which are not apperaing) and find the available of
Purchasing value key
1st Reminder/Exped.
2nd Reminder/Exped.
3rd Reminder/Exped.
Regards,
Biju K -
Itunes - how do i select multiple line items not in sequence ?
itunes - how do i select multiple line items not in sequence ?
Hold down the Command key and click each in succession.
To extend the selection across items that ARE contiguous, use the Shift key. -
LT12 TO confirmation error for multiple line items
Hi Experts,
We recently upgraded to ECC 6 DIMP EP6. We are not able to confirm TO with multiple line items. It is failing with an error message VL 198 that 0 quantity of material is available. We are able to confirm TO line items one by one. This TO is created for a delivery picking request. We tried with a configuration change for the delivery line item category availability check as Y as mentioned in this note 1653018. But still not working fine. Please let me know any relevant SAP note for this issue.
Thanks
RijilPlease run CO09 and enter material numbers to see the available quantity and see if there is some inconsistency there.
Also check MD04 for those materials to see if there is something wrong there.
If you can you can also post the screens here, if you are not sure about CO09 and MD04 interpretation. -
Mapping of Multiple Line Items
Hello All,
While trying to post a purchase order creation into R/3, there are several line items in the purchase order. Each has different quantity, GL account, cost center and unit price. So how should I map it to the target field.
Occurence of order detail
order detail 0..1
list of item details 1..1
Item detail 1..unbounded
base item detail 1..1
line item number 1..1
buyer line item num 1..1
So occurence of buyer line item number is not unbounded. so how can I duplicate this buyer line item number?
For example, In the XML source message I have 5 line items.....
for line item one, I have quantity A, GL account B, cost center C and unit price D,
for line item two, I have line item X, Quantity Y, GL account Z, Cost center M and unit price N, etc
When I am trying to map I am able to pick only the first line item. Can anyone throw some light on how I should map all the line items data?
If anyone can help me with mapping of this. A bit in detail please
Regards,
Neelima
CSCHi Neelima,
Check out this blog....
/people/claus.wallacher/blog/2006/06/29/message-splitting-using-the-graphical-mapping-tool ( with PO only)
Multiple line items are generated basically using Context.
Hope this will help.
Let me know if you need more details.
Nilesh -
Hi all,
I wana pass multiple line items thru bdc me21n....can any1 please help me .if u guys have some code can mail me at [email protected] will be rewarded.
my code below is not working for passing multiple items.
report y1_po_test
no standard page heading line-size 255.
tables: mara,
lfa1,
eina,
eine,
eban,
zdrgsah, zdrgsap,
zdrgsup,
t100,
ekko,
a004, zprice_grpsal, mvke.
*Internal Table to get the input Data
data: begin of i_input occurs 0,
matnr like ekpo-matnr,
asqty like ekpo-menge,
ebeln like ekpo-ebeln,
posnr(5),
posnr like zdrgsap-posnr,
invno like zdrgsap-invno,
invdt like zdrgsah-invdt,
netpr like zdrgsap-netpr,
cntno like zdrgsap-cntno,
shcnm like zdrgsah-shcnm,
apcno like zdrgsap-apcno,
spcno like zdrgsap-spcno,
werks like ekpo-werks,
lgort like ekpo-lgort,
matkl like ekpo-matkl,
pack(10),
mvgr2 like mvke-mvgr2,
dpric type p decimals 6 ,
gpric type p decimals 6,
end of i_input.
data: begin of i_inputxt occurs 0,
matnr(18) ,
asqty(13) ,
ebeln(10) ,
posnr(6) ,
invno(10) ,
invdt(8) ,
netpr(11) ,
cntno(11) ,
shcnm(10) ,
werks(4) ,
lgort(4) ,
matkl(9) ,
pack(10),
end of i_inputxt.
data: begin of i_error occurs 0,
prnum like eban-banfn,
pritm like eban-bnfpo,
inmat like mara-matnr,
prmat like mara-matnr,
asqty like zdrgsap-asqty,
prqty like eban-menge,
remak(100),
remark(255) type c,
end of i_error.
data : begin of i_error1 occurs 0,
prnum like eban-banfn,
pritm like eban-bnfpo,
asqty like zdrgsap-asqty,
prqty like eban-menge,
remak(100),
end of i_error1.
data : begin of i_zsap occurs 0,
ebeln like zdrgsap-ebeln,
posnr(5),
menge like zdrgsap-menge,
asqty like zdrgsap-asqty,
end of i_zsap.
data : v_ebeln like eket-ebeln.
data : begin of i_a004 occurs 0,
matnr like a004-matnr,
knumh like a004-knumh,
kbetr like konp-kbetr,
end of i_a004,
i_a0041 like i_a004 occurs 0 with header line.
data : begin of i_konp occurs 0,
knumh like konp-knumh,
kbetr like konp-kbetr,
konwa like konp-konwa,
end of i_konp.
data : begin of i_konp1 occurs 0,
knumh like konp-knumh,
kbetr like konp-kbetr,
konwa like konp-konwa,
end of i_konp1.
data : begin of i_netpr occurs 0,
ebeln like eket-ebeln,
ebelp like eket-ebelp,
matnr like ekpo-matnr,
menge like ekpo-menge,
netpr like ekpo-netpr,
kbetr like konp-kbetr,
end of i_netpr.
data : begin of i_grpsal occurs 0,
pcode like zprice_grpsal-pcode,
fact like zprice_grpsal-fact,
wfact like zprice_grpsal-wfact,
end of i_grpsal.
data : begin of i_domsal occurs 0,
pcode like zprice_grpsal-pcode,
fact like zprice_grpsal-fact,
wfact like zprice_grpsal-wfact,
end of i_domsal.
data : begin of i_zsap1 occurs 0,
ebeln like zdrgsap-ebeln,
posnr(5),
asqty like zdrgsap-asqty,
end of i_zsap1.
data: begin of bdcdata occurs 0.
include structure bdcdata. " Batch input: New table field
data: end of bdcdata.
messages of call transaction
data: messtab like bdcmsgcoll occurs 0 with header line.
data: i_mara type mara occurs 0 with header line,
i_eina like eina occurs 0 with header line,
i_eine like eine occurs 0 with header line.
data : begin of i_inferr occurs 0,
matnr like eina-matnr,
infnr like eina-infnr,
werks like eine-werks,
end of i_inferr.
data : begin of i_inferrc occurs 0,
matnr like eina-matnr,
end of i_inferrc.
*Data declaration.
data: v_file type string, " Variable for uploading file
v_item(5) type c, " Line item number
v_itno(2) type n,
p_wkurs like zdrgkurs-wkurs,
v_matnr(20) type c,
v_menge(20) type c,
v_banfn(20) type c,
v_bnfpo(20) type c,
v_bednr(20) type c,
v_werks(20),
p_lifnr(10) ,
v_flag,
p_lifnrtxt(10),
p_wkurstxt(9),
p_bsartxt(4),
v_posnr(5), n type i,
v_quant(13),
v_asqty(13),
v_prqty(13),
v_apcno(6),
v_spcno(4),
v_itm(11),
v_cnt type i,
v_cntno(4),
v_pack(10),
v_order(15),
v_lifnr(10),
v_invdt like sy-datum,
v_waers like ekko-waers,
v_podat like ekko-bedat,
v_docdt1 like sy-datum,
v_docdt(10),
v_fnam(132).
data : begin of i_test occurs 0,
bnfpo like eban-bnfpo,
matnr like eban-matnr,
menge like eban-menge,
bsmng like eban-bsmng,
end of i_test.
data : begin of i_mvke occurs 0,
matnr like mvke-matnr,
mvgr2 like mvke-mvgr2,
end of i_mvke.
data : begin of i_invno,
ebeln like ekko-ebeln,
angnr like ekko-angnr,
end of i_invno.
data : i_final like zinvdiff occurs 0 with header line.
Constants
constants : c_pd01 like eine-werks value 'PD01'.
*Selection Screen Declarations
selection-screen begin of block b1 with frame title text-010.
parameters: p_invno like zdrgsah-invno obligatory,
p_bsart like ekko-bsart obligatory.
selection-screen end of block b1.
start-of-selection.
To Upload the data into Internal table.
perform f_upload_data.
To Validate the input data.
perform f_check_data.
if i_error[] is not initial or i_error1[] is not initial.
To display the error message
perform f_display_errors.
else.
To create PO
perform f_process_session.
endif.
perform f_check_calc_price.
perform f_display_data.
perform f_update_zinvdiff.
*& Form f_get_filename
text
form f_get_filename.
endform. " F_get_filename
*& Form f_upload_data
form f_upload_data .
select matwa as matnr asqty ebeln posnr b~invno invdt netpr cntno
shcnm apcno spcno into table i_input
from zdrgsah as a join zdrgsap as b on
a~invno = b~invno
where b~invno eq p_invno.
select ebeln
posnr
menge
asqty
from zdrgsap into table i_zsap
where invno = p_invno.
loop at i_zsap.
concatenate i_zsap-posnr(4) '0' into v_posnr.
i_zsap1-ebeln = i_zsap-ebeln.
i_zsap1-posnr = v_posnr.
i_zsap1-asqty = i_zsap-asqty.
collect i_zsap1.
clear i_zsap1.
endloop.
delete adjacent duplicates from i_zsap comparing posnr menge .
delete adjacent duplicates from i_input comparing ebeln posnr.
loop at i_input.
p_werks = i_input-werks.
v_invdt = i_input-invdt.
call function 'CONVERT_DATE_FORMAT'
exporting
i_date = v_invdt
importing
e_calc_date = v_invdt.
if i_input-apcno is initial.
v_apcno = '0000'.
else.
v_apcno = i_input-apcno.
endif.
if i_input-spcno is initial.
v_spcno = '0000'.
else.
v_spcno = i_input-spcno.
endif.
if i_input-cntno is initial.
i_input-cntno = '0000'.
endif.
concatenate v_apcno v_spcno into i_input-pack.
concatenate v_pack v_cntno into v_order separated by '-'.
i_input-order = v_order.
clear : v_itm, v_cnt, v_cntno, v_pack, v_apcno, v_spcno, v_order.
concatenate i_input-posnr(4) '0' into v_posnr.
select single lifnr into p_lifnr from zdrgsup
where shcnm = i_input-shcnm.
v_lifnr = p_lifnr.
if sy-subrc <> 0.
message e000(zcnc) with text-002.
endif.
select single * from eban
where banfn eq i_input-ebeln
and bnfpo eq v_posnr.
if sy-subrc eq 0.
move eban-werks to i_input-werks.
move eban-lgort to i_input-lgort.
move eban-matkl to i_input-matkl.
move eban-bnfpo to i_test-bnfpo.
move eban-matnr to i_test-matnr.
move eban-menge to i_test-menge.
move eban-bsmng to i_test-bsmng.
modify i_input.
if not i_input-matnr eq i_test-matnr.
move i_input-ebeln to i_error-prnum.
move v_posnr to i_error-pritm.
move i_input-matnr to i_error-inmat.
move eban-matnr to i_error-prmat.
i_error-remak = 'Material does not match'.
append i_error.
clear i_error.
endif.
v_quant = i_test-menge - i_test-bsmng.
read table i_zsap1 with key ebeln = i_input-ebeln posnr = v_posnr.
if not i_zsap1-asqty <= v_quant.
move i_input-ebeln to i_error1-prnum.
move i_zsap1-posnr to i_error1-pritm.
move i_zsap1-asqty to i_error1-asqty.
move eban-menge to i_error1-prqty.
move v_quant to i_error1-prqty.
i_error1-remak = 'Material Quantity does not match'.
append i_error1.
clear i_error1.
endif.
select single matnr infnr from eina
into corresponding fields of i_eina
where matnr eq i_input-matnr
and lifnr eq p_lifnr.
if sy-subrc = 0.
append i_eina.
check not i_eina[] is initial.
select single * from eine
into i_eine
where infnr eq i_eina-infnr
and werks eq eban-werks.
if sy-subrc <> 0.
move i_input-matnr to i_inferr-matnr.
move i_eina-infnr to i_inferr-infnr.
move eban-werks to i_inferr-werks.
append i_inferr.
clear i_inferr.
endif.
else.
move i_input-matnr to i_inferrc-matnr.
append i_inferrc.
clear i_inferrc.
endif.
clear : i_eina, i_eine.
clear : i_zsap, i_zsap1, i_input, v_posnr,
v_quant, i_test.
endif.
endloop.
delete adjacent duplicates from i_error1 comparing prnum pritm.
perform chk_info_rec.
endform. " f_upload_data
*& Form f_check_data
form f_check_data .
if not i_input[] is initial.
select * from mara
into table i_mara
for all entries in i_input
where matnr eq i_input-matnr.
endif.
loop at i_mara.
read table i_input with key matnr = i_mara-matnr.
if sy-subrc <> 0.
write : 'Following Part Numbers are not found in MARA'.
write : / i_input-matnr.
endif.
endloop.
if i_mara[] is initial.
loop at i_input.
format color col_heading intensified off.
write : 'Following Part Numbers are not found in MARA'.
format color col_normal intensified off.
write : / i_input-matnr.
endloop.
endif.
select single wkurs into p_wkurs from zdrgkurs
where invno = p_invno.
if sy-subrc ne 0.
message e000(zcnc) with text-s11.
endif.
call function 'CONVERSION_EXIT_ALPHA_OUTPUT'
exporting
input = p_lifnr
importing
output = p_lifnr.
p_lifnrtxt = p_lifnr.
p_wkurstxt = p_wkurs.
p_bsartxt = p_bsart.
loop at i_input.
move-corresponding i_input to i_inputxt.
append i_inputxt.
endloop.
select single ebeln
angnr from ekko
into i_invno
where angnr = p_invno.
if sy-subrc = 0.
perform display_err.
endif.
endform. " f_check_data
*& Form f_process_session
text
form f_process_session.
v_docdt1 = sy-datum.
write v_docdt1 to v_docdt using edit mask '__.__.____'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MEDOCTYPE'.
perform bdc_field using 'BDC_CURSOR'
'MEPO_TOPLINE-BSART'.
perform bdc_field using 'MEPO_TOPLINE-BSART'
p_bsartxt.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'MEPO_TOPLINE-SUPERFIELD'
p_lifnrtxt.
perform bdc_field using 'BDC_CURSOR'
'MEPO1222-BUKRS'.
perform bdc_field using 'MEPO1222-EKORG'
'SBAP'.
perform bdc_field using 'MEPO1222-EKGRP'
'PG1'.
perform bdc_field using 'MEPO1222-BUKRS'
'SBA'.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=TABHDT2'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'MEPO_TOPLINE-BSART'
p_bsartxt.
perform bdc_field using 'MEPO_TOPLINE-SUPERFIELD'
p_lifnrtxt.
********************conditions***************************************
perform bdc_field using 'BDC_CURSOR'
'KOMV-KSCHL(08)'.
perform bdc_field using 'KOMV-KSCHL(07)'
'zot1'.
perform bdc_field using 'KOMV-KSCHL(08)'
'zinc'.
perform bdc_field using 'KOMV-KSCHL(09)'
'ziv1'.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=V69A_KOAN'.
perform bdc_field using 'BDC_CURSOR'
'KOMV-KSCHL(01)'.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'KOMV-KSCHL(02)'
'zca1'.
perform bdc_field using 'KOMV-KSCHL(03)'
'zfa1'.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=TABHDT7'.
perform bdc_field using 'BDC_CURSOR'
'KOMV-KSCHL(09)'.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'MEPO1229-IHRAN'.
perform bdc_field using 'MEPO1229-ANGNR'
p_invno.
perform bdc_field using 'MEPO1229-IHRAN'
v_invdt.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MEV4001BUTTON'.
perform bdc_field using 'BDC_CURSOR'
'MEPO1229-IHRAN'.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MEV4000BUTTON'.
perform bdc_field using 'BDC_CURSOR'
'MEPO1229-IHRAN'.
perform bdc_field using 'DYN_6000-LIST'
' 1'.
loop at i_inputxt.
concatenate i_inputxt-posnr(4) '0' into v_posnr.
concatenate 'MEPO1211-EMATN(' v_itno ')' into v_matnr.
concatenate 'MEPO1211-MENGE(' v_itno ')' into v_menge.
concatenate 'MEPO1211-BANFN(' v_itno ')' into v_banfn.
concatenate 'MEPO1211-BNFPO(' v_itno ')' into v_bnfpo.
concatenate 'MEPO1211-BEDNR(' v_itno ')' into v_bednr.
concatenate 'MEPO1211-WERKS(' v_itno ')' into v_werks.
v_item = v_item + 10.
endif.
v_itno = v_itno + 1.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
v_matnr.
perform bdc_field using v_matnr "'MEPO1211-EMATN(01)'
i_inputxt-matnr.
perform bdc_field using v_menge "'MEPO1211-MENGE(01)'
i_inputxt-asqty.
perform bdc_field using v_banfn "'MEPO1211-BANFN(01)'
i_inputxt-ebeln.
perform bdc_field using v_bnfpo "'MEPO1211-BNFPO(01)'
i_inputxt-posnr.
perform bdc_field using 'DYN_6000-LIST'
v_itno.
loop at i_inputxt .
v_itno = sy-tabix.
clear v_fnam.
concatenate 'MEPO1211-EMATN(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-matnr.
clear v_fnam.
concatenate 'MEPO1211-MENGE(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-asqty.
clear v_fnam.
concatenate 'MEPO1211-BANFN(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-ebeln.
clear v_fnam.
concatenate 'MEPO1211-BNFPO(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-posnr.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
endloop.
loop at i_inputxt from 6.
v_itno = sy-tabix.
clear v_fnam.
concatenate 'MEPO1211-EMATN(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-matnr.
clear v_fnam.
concatenate 'MEPO1211-MENGE(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-asqty.
clear v_fnam.
concatenate 'MEPO1211-BANFN(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-ebeln.
clear v_fnam.
concatenate 'MEPO1211-BNFPO(' v_itno ')' into v_fnam.
perform bdc_field using v_fnam
i_inputxt-posnr.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
endloop.
perform bdc_field using 'BDC_CURSOR'
'MEPO1320-SLFDT(01)'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=TABHDT2'.
perform bdc_field using 'DYN_6000-LIST'
' 2'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=V69A_KOAK'.
perform bdc_field using 'BDC_CURSOR'
'KOMV-KBETR(05)'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MECHECKDOC'.
perform bdc_field using 'BDC_CURSOR'
'KOMV-KSCHL(01)'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_CURSOR'
'04/03'.
perform bdc_field using 'BDC_OKCODE'
'=&ONT'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MEV4000BUTTON'.
perform bdc_field using 'BDC_CURSOR'
'MEPO_TOPLINE-BSART'.
perform bdc_field using 'DYN_6000-LIST'
' 2'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'KOMV-KBETR(08)'.
perform bdc_field using 'KOMV-KBETR(03)'
' .54'.
perform bdc_field using 'KOMV-KBETR(08)'
' .54'.
perform bdc_dynpro using 'SAPLMEGUI' '0014'.
perform bdc_field using 'BDC_OKCODE'
'=MESAVE'.
perform bdc_field using 'BDC_CURSOR'
'MEPO1211-NETPR(01)'.
perform bdc_transaction using 'ME21N'.
endform. "f_process_session
*& Form bdc_transaction
text
-->P_0464 text
form bdc_transaction using tcode.
data: l_mstring(480).
data: l_subrc like sy-subrc.
data: v_mode type c.
v_mode = 'A'.
refresh messtab.
call transaction tcode using bdcdata
mode v_mode
update 'S'
messages into messtab.
l_subrc = sy-subrc.
WRITE: / 'CALL_TRANSACTION',
TCODE,
'returncode:'(I05),
L_SUBRC,
'RECORD:',
SY-INDEX.
loop at messtab.
select single * from t100 where sprsl = messtab-msgspra
and arbgb = messtab-msgid
and msgnr = messtab-msgnr.
if sy-subrc = 0.
l_mstring = t100-text.
if l_mstring cs '&1'.
replace '&1' with messtab-msgv1 into l_mstring.
replace '&2' with messtab-msgv2 into l_mstring.
replace '&3' with messtab-msgv3 into l_mstring.
replace '&4' with messtab-msgv4 into l_mstring.
else.
replace '&' with messtab-msgv1 into l_mstring.
replace '&' with messtab-msgv2 into l_mstring.
replace '&' with messtab-msgv3 into l_mstring.
replace '&' with messtab-msgv4 into l_mstring.
endif.
condense l_mstring.
if messtab-msgtyp eq 'E' or messtab-msgtyp eq 'W'.
write: / messtab-msgtyp, l_mstring(250).
endif.
search l_mstring for 'SEA'.
if sy-subrc = 0.
write: / messtab-msgtyp, l_mstring(250).
endif.
else.
write: / messtab.
endif.
endloop.
endform. " bdc_transaction
Start new screen *
form bdc_dynpro using program dynpro.
clear bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
append bdcdata.
endform. "BDC_DYNPRO
Insert field *
form bdc_field using fnam fval.
if fval <> space.
clear bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
append bdcdata.
endif.
endform. "BDC_FIELD
*& Form f_display_errors
form f_display_errors .
if i_error[] is not initial.
format color col_heading intensified off.
uline .
write :/ 'PR No ',
(10) 'Item No',
(20) 'PR Part No',
(30) 'Invoiced Part No',
(60) 'Remark'.
uline .
loop at i_error.
perform f_display_color.
write :/ i_error-prnum,
(10) i_error-pritm ,
(20) i_error-prmat,
(30) i_error-inmat,
(60) i_error-remak.
clear i_error.
endloop.
endif.
if i_error1[] is not initial.
format color col_heading intensified off.
uline .
write :/ 'PR No ',
(10) 'Item No',
(20) 'PR Quantity',
(30) 'Invoiced Quantity',
(60) 'Remark'.
uline .
loop at i_error1.
perform f_display_color.
if not i_error1-asqty is initial.
v_asqty = i_error1-asqty .
v_prqty = i_error1-prqty.
write :/ i_error1-prnum,
(10) i_error1-pritm ,
(20) v_prqty,
(30) v_asqty,
(60) i_error1-remak.
clear : v_asqty, v_prqty.
endif.
clear i_error1.
endloop.
endif.
endform. " f_display_errors
*& Form f_display_color
form f_display_color .
if v_flag = 0.
format color col_normal intensified on.
v_flag = 1.
elseif v_flag = 1.
format color col_normal intensified off.
v_flag = 0.
endif.
endform. " f_display_color
*& Form display_err
text
--> p1 text
<-- p2 text
form display_err .
format color col_heading intensified off.
write (120) text-006.
uline .
write : 'PR No ',
(15) 'Invoice No',
(30) 'Remark'.
uline.
format color col_negative intensified off.
write :/ i_invno-ebeln,
(15) p_invno ,
(30) 'Invoice Already Exists'.
endform. " display_err
*& Form f_check_calc_price
text
--> p1 text
<-- p2 text
form f_check_calc_price .
data : d_pric type p decimals 6 ,
g_pric type p decimals 6,
v_exch type p decimals 4 value '0.1049'.
select single ebeln
waers
bedat
from ekko into (v_ebeln , v_waers , v_podat)
where angnr eq p_invno.
loop at i_input.
concatenate i_input-posnr(4) '0' into v_posnr.
select single p~ebeln
p~ebelp
matnr
p~menge
netpr
into i_netpr
from eket as t inner join ekpo as p
on t~ebeln eq p~ebeln
and t~ebelp eq p~ebelp
where t~ebeln eq v_ebeln
and t~banfn eq i_input-ebeln
and t~bnfpo eq v_posnr.
if v_waers eq 'JPY'.
i_netpr-netpr = i_netpr-netpr * 100.
endif.
if not i_input-netpr eq i_netpr-netpr.
append i_netpr.
clear : i_input, i_netpr, v_posnr.
else.
clear : i_input, i_netpr, v_posnr.
endif.
endloop.
delete adjacent duplicates from i_netpr comparing ebeln ebelp matnr.
modify zinvdiff from table i_final.
if i_netpr[] is not initial.
select matnr
knumh
from a004
into table i_a004
for all entries in i_netpr
where matnr = i_netpr-matnr
and kschl = 'ZPR0'
and vkorg = 'SBAP'
and vtweg = 'DD'
and ( datab <= sy-datum and datbi => sy-datum ).
select matnr
knumh
from a004
into table i_a0041
for all entries in i_netpr
where matnr = i_netpr-matnr
and kschl = 'ZPR0'
and vkorg = 'EXPT'
and vtweg = 'BR'
and ( datab <= sy-datum and datbi => sy-datum ).
select matnr mvgr2 from mvke
into corresponding fields of table i_mvke
for all entries in i_netpr
where matnr = i_netpr-matnr
and vkorg = 'SBAP'
and vtweg = 'DD'.
if i_a004[] is not initial.
select knumh
kbetr
from konp
into table i_konp
for all entries in i_a004
where knumh = i_a004-knumh.
loop at i_a004.
read table i_konp with key knumh = i_a004-knumh.
i_konp-kbetr = i_konp-kbetr / 10.
move i_konp-kbetr to i_a004-kbetr.
modify i_a004.
clear : i_konp, i_a004.
endloop.
endif.
if i_a0041[] is not initial.
select knumh
kbetr
from konp
into table i_konp1
for all entries in i_a0041
where knumh = i_a0041-knumh.
loop at i_a0041.
read table i_konp1 with key knumh = i_a0041-knumh.
move i_konp1-kbetr to i_a0041-kbetr.
modify i_a0041.
clear : i_konp1, i_a0041.
endloop.
endif.
if i_mvke[] is not initial.
select pcode
fact
wfact
into table i_domsal
from zprice_grpsal
for all entries in i_mvke
where pcode = i_mvke-mvgr2
and vkorg = 'SBAP'
and vtweg = 'DD'
and lifnr = v_lifnr.
select pcode
fact
wfact
into table i_grpsal
from zprice_grpsal
for all entries in i_mvke
where pcode = i_mvke-mvgr2
and vkorg = 'EXPT'
and vtweg = 'BR'
and lifnr = v_lifnr.
endif.
loop at i_input .
read table i_mvke with key matnr = i_input-matnr.
if sy-subrc = 0.
move i_mvke-mvgr2 to i_input-mvgr2.
endif.
read table i_domsal with key pcode = i_input-mvgr2.
if sy-subrc = 0.
d_pric = i_domsal-fact / i_domsal-wfact.
i_input-dpric = i_input-netpr * d_pric * ( 112 / 100 ).
endif.
read table i_grpsal with key pcode = i_input-mvgr2.
if sy-subrc = 0.
g_pric = i_grpsal-fact * i_grpsal-wfact.
i_input-gpric = ( i_input-netpr * ( 112 / 100 ) ) / g_pric .
endif.
modify i_input.
clear i_input.
clear d_pric.
clear g_pric.
endloop.
endif.
endform. " f_check_price
*& Form f_display_data
text
--> p1 text
<-- p2 text
form f_display_data .
loop at i_netpr.
move i_netpr-ebeln to i_final-ebeln.
move i_netpr-ebelp to i_final-ebelp.
move i_netpr-matnr to i_final-matnr.
move i_netpr-netpr to i_final-poprc.
move i_netpr-menge to i_final-asqty.
move p_invno to i_final-invoice.
append i_final.
clear i_final.
endloop.
loop at i_final.
move v_podat to i_final-podat.
read table i_input with key matnr = i_final-matnr.
move i_input-netpr to i_final-invpr.
move i_input-dpric to i_final-dcalclp.Dear Santosh,
I haven't gone through your piece of code.
But I can suggest a way out, while handling multiple line-items.
The following code sample elucidate the use of multiple line-items. This is just an example for your understanding.
FORM BDC_OPERATION .
DATA: LV_ARBPL(15) TYPE C,
LV_ROWNO(2) TYPE N.
LOOP AT IT_TABDATA INTO WA_TABDATA.
CLEAR: LV_ARBPL
LV_ROWNO = SY-TABIX.
CONCATENATE 'PLPOD-ARBPL' '(' LV_ROWNO ')' INTO LV_ARBPL.
PERFORM BDC_DYNPRO USING 'SAPLCPDI' '1400'.
PERFORM BDC_FIELD USING 'BDC_CURSOR' LV_ARBPL.
PERFORM BDC_FIELD USING 'BDC_OKCODE' '=PICK'.
PERFORM BDC_FIELD USING LV_ARBPL WA_TABDATA-ARBPL.
ENDLOOP.
ENDFORM. " BDC_OPERATION
Regards,
Abir
Please don't forget to award points * -
URGENT: Delivery with multiple line items for a STO
Hi Gurus,
We ar ecreating deliveries using VL10b for a STO. Teh TSO has 40 - 50 line items. But the delivery is created with one line item only an dit creates a delivery for each line item. How cna we allow the inclusion of multiple line items in delivery?
We are using delivery type NL an ditem categor is NLN.
Geratly appreciate any help in that.
Thanks,
KHANThe problem you face is called 'Delivery split'.
For the STO scenario, one common cause is different delivery dates (in the past) in the STO line items. If so, then you should refer to SAP Note 377501 (from where I quote below):
You can implement the source code specified in the correction instructions in copy routine 301 (or a copy of this routine in the customer namespace). This correction ensures that when you transfer data form the preceding document, backlogged delivery dates or goods issue dates are set to the current date. This prevents the system form performing a delivery split.
Then a rescheduling of the delivery occurs. Since forward scheduling occurs for backlogged delivery items (that is, the picking date or the transportation planning date is set to the current date), the manipulation of the delivery date or goods issue date in the copy routine does not affect the result of the scheduling.
If the dates are not the problem, then this Note refers to other Notes which deal with this problem, and should definitely solve your problem.
Regards
Nikhilesh -
BDC for VA01 with multiple line items
Hi,
My client is 4.6c version, I have created a BDC program for transaction VA01 which will have multiple line items. I'm able to enter 12 items in the first instance, then 12 items next time. But I'm not doing any P+..System is automatically taking me to first item after reaching item 12 every time.
But I have a doubt in production system also I will have only 12 items every time to enter..If not my program may not work..
I'm calling BDC using following statment..
CALL TRANSACTION 'VA01' USING BDCDATA
MODE 'N'
UPDATE 'S'
MESSAGES INTO lt_message.
Please suggest me the solution.
Regards
Jaker.I had a similar problem with goods movements in a CO11N BDC I wrote. Here's how it was fixed:
DATA: lcl_opt TYPE ctu_params.
lcl_opt-defsize = 'X'.
CALL TRANSACTION 'CO11N' USING i_bdctbl OPTIONS FROM lcl_opt
MESSAGES INTO messco11n.
The option "defsize" makes sure that the screen always contains the same number of lines as it goes through the BDC. That way, you can write in the paging logic without having to worry about the number of lines that appear on a user's screen as it may vary depending on how their screen resolution is set up. -
Setting the value of a single attribute for multiple line items
Hi all,
I am working on a Web Dynpro application, I have created this applicaion for an accounting document so it has header data and multiple line item data. As per the requirement I have to put the following logic:
1. When a user enters a value in the field KBLNR on the line item, all the other fields like cost centerm fund, functional area should populate from a database table based on the value of the KBLNR. to get this I have put the following code:
TYPES: BEGIN OF t_kblp,
fipos TYPE kblp-fipos,
kostl TYPE kostl,
END OF t_kblp.
DATA lv_kblnr TYPE wd_this->element_t_bseg-kblnr.
DATA: lt_kblp TYPE STANDARD TABLE OF t_kblp,
wa_kblp LIKE LINE OF lt_kblp,
lt_bseg TYPE STANDARD TABLE OF bseg,
wa_bseg TYPE bseg.
DATA lo_nd_t_bseg TYPE REF TO if_wd_context_node.
DATA lo_el_t_bseg TYPE REF TO if_wd_context_element.
DATA: ls_t_bseg TYPE wd_this->element_t_bseg,
lo_api_controller TYPE REF TO if_wd_controller,
lo_message_manager TYPE REF TO if_wd_message_manager,
lo_nd_tbseg TYPE REF TO if_wd_context_node,
lo_el_tbseg TYPE REF TO if_wd_context_element,
lt_el_tbseg TYPE wdr_context_element_set,
lv_bseg TYPE bseg.
lo_nd_t_bseg = wd_context->path_get_node( path = `ZDATA.CHANGING.T_BSEG` ).
lo_api_controller ?= wd_this->wd_get_api( ).
CALL METHOD lo_api_controller->get_message_manager
RECEIVING
message_manager = lo_message_manager.
lo_nd_tbseg = wd_context->path_get_node( path = `ZDATA.CHANGING.T_BSEG` ).
lt_el_tbseg = lo_nd_tbseg->get_elements( ).
LOOP AT lt_el_tbseg INTO lo_el_tbseg.
lo_el_tbseg->get_static_attributes(
IMPORTING static_attributes = lv_bseg ).
IF lv_bseg-kblnr NE ' '.
SELECT belnr
fipos
kostl
PSPNR
geber
saknr
fkber
grant_nbr
gsber
FROM kblp
inTO corresponding fields of wa_kblp
WHERE belnr = lv_bseg-kblnr and
saknr = lv_bseg-saknr.
ENDSELECT.
lo_nd_t_bseg = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG` ).
* get element via lead selection
lo_el_t_bseg = lo_nd_t_bseg->get_element( ).
lo_el_tbseg->set_static_attributes(
EXPORTING static_attributes = wa_kblp ).
CLEAR: lv_bseg, wa_kblp.
ENDLOOP.
everything is working fine but now the problem is couple of fields that I have in wa_kblp are with different names in bseg table and hence they are not updating... I tried putting the following logic within the loop :
lo_el_t_bseg->set_attribute(
name = `PROJK`
value = wa_kblp-pspnr ).
but it's only setting the value of the first line item and not working for the multiple line items, can you please tell me how can do this?
Thanks,
Rajat Garg
Edited by: rajatg on Jun 24, 2011 5:09 PMHi Chris,
I tried your code and it worked fine but after I put this code I am getting another issue. within the loop I had a code to make the fields non modifiable on the screen and was working fine but now what's happening is it's making the all the lines uneditable except the one with data on it (which is completely opposite), this is what I have coded:
LOOP AT lt_el_tbseg INTO lo_el_tbseg.
lo_el_tbseg->get_static_attributes(
IMPORTING static_attributes = lv_bseg ).
IF lv_bseg-kblnr NE ' '.
SELECT belnr
fipos
kostl
PSPNR
geber
saknr
fkber
grant_nbr
gsber
FROM kblp
inTO corresponding fields of wa_kblp
WHERE belnr = lv_bseg-kblnr and
saknr = lv_bseg-saknr.
ENDSELECT.
move: wa_kblp-belnr to wa_bseg-kblnr,
wa_kblp-fipos to wa_bseg-fipos,
wa_kblp-kostl to wa_bseg-kostl,
wa_kblp-pspnr to wa_bseg-projk,
wa_kblp-geber to wa_bseg-geber,
wa_kblp-saknr to wa_bseg-saknr,
wa_kblp-fkber to wa_bseg-fkber,
wa_kblp-grant_nbr to wa_bseg-grant_nbr,
wa_kblp-gsber to wa_bseg-gsber,
lv_bseg-dmbtr to wa_bseg-dmbtr.
append wa_bseg to lt_bseg.
lo_nd_edit_property = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG.EDIT_PROPERTY` ).
get element via lead selection
lo_el_edit_property = lo_nd_edit_property->get_element( ).
lo_el_edit_property->set_attribute(
name = `EDIT_FIELD`
value = 'ABAP_TRUE' ).
lo_el_edit_property->set_attribute(
name = `EDIT_WBS`
value = 'ABAP_TRUE' ).
endif.
endloop.
o_nd_t_bseg = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG` ).
get element via lead selection
lo_el_t_bseg = lo_nd_t_bseg->get_element( ).
CALL METHOD lo_nd_t_bseg->bind_table
EXPORTING
new_items = lt_bseg.
Can you please see what I am doing it wrong here.... -
Production order from sales order with multiple line item(for one material)
Dear Gurus,
I am working in MTO scenarios. If there is several line item in a sales order for one material, multiple production order( same as no. of sales order line item) is getting created against each of the line item.My requirement is,since the material code is same in each line item and sales order is one, one production order should be generated for all line item. please tell me how to do it.
(Here for one material, multiple line item is required for some specific reason)
Regards
Rajib PathakHi,
This is not possible.
In Std SAP will create one production order for one sales order. The stock is also allocated to thet particular sales order only. Because each and every sales order may vary in any one of the parameters. Considering this, SAP has designed like this.
Regards,
V. Suresh
Maybe you are looking for
-
Hello, I'm trying to create an parameter and associated array for a record selection I would like to give the end user. I created a parameter field called "Incentives" and created a new formula field "IncentivesArray": If "*" in {?Incentives} then tr
-
Acura TSX 2007 - Bluetooth doesn't work correctly
I have an Acura TSX 2007. I can't initiate a call from my iPhone 3GS and have it connect via car's bluetooth, even though the iPhone and the car are paired. The call would connect but I can't hear the person on the other end, not through my car's spe
-
why ie-10/window 8/msn search is not upatable to adobe flash player 11.5.5?
-
Dear ALL I wonder how to get the MAC Address of a certain Machine PS: I read through of the Forums but did not find the answer to my question Hope you could Help
-
Hi Expert, I tried to upload the data in excel via 7KEX but encountered some problem. I have followed the below link and create the planner profile and layout and excel format. http://help.sap.com/saphelperp60_sp/helpdata/en/e9/254f2815b311d2a5610060