MM - PO - what is the meaning of this button?

Dear friends,
Could anybody help me with one question.
There is a strange button in a Purchasing Order on the Account Assignment tab page on this screenshot (it is marked with red color).
Screenshot below
http://content.foto.mail.ru/mail/raiden87/81/i-84.jpg
What is the meaning of this button? When it is used for?
I hope that anybody knows the meaning =)

hi raiden,
as for as i have gone through the issue I have come to know that:
If you want to use multiple account assignment for a line item in PO then at that moment you will have to first press the "repeat on " button. only after that multiple account button will be active that is just before your "repeat on " button.
Steps:
1:Save your PO.
2:Go to transaction code ME22N to change the PO.
(Here you will firstly see that the multiple a/c assignment button is firsty gray.It will become active only after when you press the "repeat on" button).
I hope It will be helpfull for you.
regards,
Aslam Ansari.

Similar Messages

So I have an iPad with the smart cover, and it's usually supposed to turn on the iPad when u open it, but it's no doing that for me. Nor is it turning off without pressing the button. What is the meaning of this?

So I have an iPad with the smart cover, and it's usually supposed to turn on and off the iPad when u open it and close it, but it's not turning on for me. Nor is it turning off without pressing the button. What is the meaning of this?what caused it to be this way? Is there someway that I could fix it?

Wait a sec did this just start?
You set up the smart cover function in settings (you did that, right?) so, if you did that and it's failed you make an appointment at your nearest Genius Bar now.

What is the meaning of this column in the pricing procedure?

Dear Gurus,
What is the meaning of this column in the pricing procedure?
thanks..

subtotal field : Subtotal field is used to pass the value to some other field in PO .
for ex: using value 9 you pass the value to field komp-brtwr. so that this can be used in any other routine in the pricing procedure.
requirement field: if there is a scenario that condition type should come in pricing on some condition like vendor country is india. in that case use create the requirment and attached this requirement.in this requirment you put logic and set the sy-subrc value 4 or 0.

What's the meaning of this error message?

I regularly receive from different AEBS the following error
message:
| Sep 16 11:33:06 15a6.net.pasteur.fr 15a6-net-pasteur-fr dot11: Deauthenticated with station 00:11:24:2d:39:a6 (received invalid class-3 frame).
What is the cause of this error?
What is an invalid class-3 frame?
dan

Hello,
If you found that in your Airport Express log, then seems that can be caused (at least one option is:) streaming iTunes music through the AE.
Solution: Deactivate DHCP on the Express via the Aiport Management Utility, and fix it's IP and DNS settings to something coherent with your network. Save the settings to the Express, it reboots and your are done.
(If you continue monitoring the logs, the "Deauthenticated..." message above keeps on happening, but the Express now recovers fast enough so that iTunes never notices)
So just avoid DHCP if that is your scenario and all will come back normality.
Please let me know if all is OK after this.

What's the meaning of this error?

Hi,
I've tried to load data to ODS.
But i got this error, "Error4 while loading data" or "Error1 while loading data".
Whats the meaning of both of this error?
Regards,
Arun.M.D

Dear Arun,
The transfer rules transform and clean up the data from the PSA into ODS. Please check if you have correct data in PSA and transfer/update rules are correct.
Note:
It is also possible to schedule the activation of ODS object data and the update from the ODS object into the related InfoCubes or ODS objects.
The individual steps, including the ODS object processing, are logged in the Monitor. Logs detailing the activation of the new records from the existing request in the ODS object, are also stored in the Monitor.
Reward if it helps.
Regards,
Naveen.

What does the meaning of this error in udump?

I solved my RMAN backup slowness problem. But I noticed that during the backup process, it generated an error file in udump as
$ more mybk_ora_651394.trc
/oracleapp/admin/mybk/udump/mybk_ora_651394.trc
Oracle Database 10g Release 10.2.0.1.0 - 64bit Production
ORACLE_HOME = /oracleapp/oracle/product/10.2.0/db_1
System name: AIX
Node name: mybk
Release: 3
Version: 5
Machine: ##########
Instance name: mybk
Redo thread mounted by this instance: 1
Oracle process number: 34
Unix process pid: 651394, image: oracle@mybk (TNS V1-V3)
*** 2007-01-19 16:30:15.302
*** ACTION NAME:(0000037 STARTED111) 2007-01-19 16:30:15.285
*** MODULE NAME:(backup incr datafile) 2007-01-19 16:30:15.285
*** SERVICE NAME:(SYS$USERS) 2007-01-19 16:30:15.285
*** SESSION ID:(539.666) 2007-01-19 16:30:15.285
*** 2007-01-19 16:30:25.862
*** ACTION NAME:(0000063 STARTED111) 2007-01-19 16:30:25.862
*** MODULE NAME:(backup archivelog) 2007-01-19 16:30:25.862
What does it mean? Every "control autobackup" will produce such error file in udump.
Message was edited by:
user508054

I think I need more investigation about this. I found two papers last night:
http://www-128.ibm.com/developerworks/linux/linux390/perf/tuning_rec_database_OracleRec.html
http://www.netapp.com/library/tr/3408.pdf
with a previous online paper mentioning to alter the maxservers of aio0. Although this is an alternative, I tried to increase the value to 300 (500 at this moment) and it does not seem to work. On other hand, with change of the disk_asynch_io, it will hinder the exp/imp pump. So I really don´t know what to say.
Apparently the disk_asynch_io needs to be FALSE in order to speed up the backup. just verified again, even with my maxserver=500 did not help.
Message was edited by:
user508054
Use the expdp to dump my db with the asynch_io in FALSE. It looks OK, no delay.
Message was edited by:
user508054

What's the meaning of this HRESULT code?

Hi all....
Programming language: Visual C++ 6.0
Well... I have a problem making this call,
OraParametersPtr piParameters = m_piDatabase->Parameters;
piParameters->Add(lpszName, *pvarValue, nDirection, nType, _T(""));
When calling Add method, an exception is thrown using a comerror instance. The
m_hresult member is 0x800403b8. I tried to search for an explanation of that
code but without success.
The actual call is,
piParameters->Add(OLE2T(sName), &varValue, nDirection, nType);
where sName is the name of parameter (as BSTR), varValue is the value (as
VARIANT), nDirection is 0 (paramMode value) and nType is 0 too (serverType
Value)
The IDL for the Add method is (present in OIP9.TLB):
HRESULT _stdcall Add(
[in] BSTR Name,
[in] VARIANT initval,
[in] int IOtype,
[in, optional] short varType,
[in, optional] BSTR objectname);
As you see, varType and objectname parameters are optional, notwithstanding, if
I don't use them when calling Add method, compiler sends an error. Since those
parameters aren't VARIANT, I cannot call the method using &vtMissing, so I pass
varType explicitly as a determined value, and objectname as _T("").
So, the questions are:
- Can you know what means 0x800403b8 error?
- If the error is produced by the calling of parameters, how can I call that
method without passing the optional parameters?
This object (OraParametersPtr) is part of the Oracle Objects for OLE, and the
error isn't an Oracle error, since an exception occur. If it were an Oracle
error, an HRESULT code will be returned by the Add method.
Any help will be greatly appreciated.
Thanks
Jaime

I suspect it is a bug. Make sure you are on the latest patch release. I think the latest 9.2 patch is 9.2.0.4.8.

What`s the mean by this messages?(about soarise install) please hlep ~

6 Configuring Kernel Parameters
Verify that the following kernel parameters are set to values greater than or equal to the recommended value shown:
Parameter Replaced by Resource Control Recommended Value
noexec_user_stack NA 1
semsys:seminfo_semmni project.max-sem-ids 100
semsys:seminfo_semmns NA 1024
semsys:seminfo_semmsl project.max-sem-nsems 256
semsys:seminfo_semvmx NA 32767
shmsys:shminfo_shmmax project.max-shm-memory 4294967295
shmsys:shminfo_shmmin NA 1
shmsys:shminfo_shmmni project.max-shm-ids 100
shmsys:shminfo_shmseg NA 10
Note:
If the current value for any parameter is higher than the value listed in this table, then do not change the value of that parameter.
To view the current value specified for these kernel parameters, and to change them if necessary, follow these steps:
To view the current values of these parameters, enter the following commands:
# id -p // to verify the project id
uid=0(root) gid=0(root) projid=1 (user.root)
# prctl -n project.max-shm-memory -i project user.root
# prctl -n project.max-sem-ids -i project user.root
If you must change any of the current values, then follow these steps:
To modify the value of max-shm-memory to 6 GB:
# prctl -n project.max-shm-memory -v 6gb -r -i project user.root
To modify the value of max-sem-ids to 256:
# prctl -n project.max-sem-ids -v 256 -r -i project user.root
Note:
When you use the prctl command (Resource Control) to change system parameters, you do not need to restart the system for these parameter changes to take effect. However, the changed parameters do not persist after a system restart.
quesiton:
how can i setup it??this message what`s mean?

Use the section immediately after that Note in the documentation (Configuring Kernel Parameters on Solaris 10) to ensure the values remain in affect after a restart of the server.

What is the meaning of this line of code

hi
we have time.xls file
on file the first
Time A , B , C
07:00 07:47 08:48 09:35
and in java we have
if (courseType == COURSE_OLD)
            return generateTimes(startingTime, 53, 2 * 60, 2 * 60 + 53, 0);what is coding 's meaning??
Thank you

the whole java class in here
import java.util.Calendar;
import java.util.Date;
public class StartingTimeUtils {
    public static int COURSE_OLD = 0;
    public static int COURSE_NEW = 1;
    public static int COURSE_EDEN = 2;
    public static String[] getSummerSixMinute23BallRule(int courseType, Date startingTime, boolean title) {
        if (title) // return titles only
            return commonCourse1(courseType);
        } else {
            if (courseType == COURSE_OLD)
                return generateTimes(startingTime, 47, 60 + 48, 2 * 60 + 35, 0);
            if (courseType == COURSE_NEW)
                return generateTimes(startingTime, 60 + 59, 2 * 60 + 47, 0, 0);
            if (courseType == COURSE_EDEN)
                return generateTimes(startingTime, 24, 60 + 19, 2 * 60 + 30, 3 * 60 + 6);
        return new String[]{"", "", "", ""};
    public static String[] getSummerSevenMinute34BallRule(int courseType, Date startingTime, boolean title) {
        if (title) // return titles only
            return commonCourse1(courseType);
        else
            return commonTime1(courseType, startingTime);
    public static String[] getSummerEightMinuteAnyGame34BallRule(int courseType, Date startingTime, boolean title) {
        if (title) // return titles only
            return commonCourse1(courseType);
        else
            return commonTime1(courseType, startingTime);
    public static String[] getWinterSixMinute23BallRule(int courseType, Date startingTime, boolean title) {
        if (title) // return titles only
            return commonCourse1(courseType);
        else
            return commonTime2(courseType, startingTime);
    public static String[] getWinterSevenMinuteAnyGameRule(int courseType, Date startingTime, boolean title) {
        if (title) // return titles only
            return commonCourse1(courseType);
        else
            return commonTime3(courseType, startingTime);
    public static String[] getWinterEightMinuteAnyGameRule(int courseType, Date startingTime, boolean title) {
        if (title) // return titles only
            return commonCourse1(courseType);
        else
            return commonTime3(courseType, startingTime);
    /* Add each time and return as time string eg 12:55 */
    private static String[] generateTimes(Date startingTime, int i, int j, int k, int l) {
        Calendar cal1 = Calendar.getInstance();
        cal1.setTime(startingTime);
        cal1.add(Calendar.MINUTE, i);
        String time1 = "";
        if (i > 0)
            time1 = StringFormater.formatTime(cal1.getTime());
        Calendar cal2 = Calendar.getInstance();
        cal2.setTime(startingTime);
        cal2.add(Calendar.MINUTE, j);
        String time2 = "";
        if (j > 0)
            time2 = StringFormater.formatTime(cal2.getTime());
        Calendar cal3 = Calendar.getInstance();
        cal3.setTime(startingTime);
        cal3.add(Calendar.MINUTE, k);
        String time3 = "";
        if (k > 0)
            time3 = StringFormater.formatTime(cal3.getTime());
        Calendar cal4 = Calendar.getInstance();
        cal4.setTime(startingTime);
        cal4.add(Calendar.MINUTE, l);
        String time4 = "";
        if (l > 0)
            time4 = StringFormater.formatTime(cal4.getTime());
        return new String[]{time1, time2, time3, time4};
    private static String[] commonTime1(int courseType, Date startingTime) {
        if (courseType == COURSE_OLD)
            return generateTimes(startingTime, 53, 2 * 60, 2 * 60 + 53, 0);
        if (courseType == COURSE_NEW)
            return generateTimes(startingTime, 2 * 60 + 27, 3 * 60 + 6, 0, 0);
        if (courseType == COURSE_EDEN)
            return generateTimes(startingTime, 27, 60 + 30, 2 * 60 + 50, 3 * 60 + 30);
        return new String[]{"", "", "", ""};
    private static String[] commonTime2(int courseType, Date startingTime) {
        if (courseType == COURSE_OLD)
            return generateTimes(startingTime, 46, 60 + 42, 2 * 60 + 28, 0);
        if (courseType == COURSE_NEW)
            return generateTimes(startingTime, 2 * 60 + 5, 2 * 60 + 39, 0, 0);
        if (courseType == COURSE_EDEN)
            return generateTimes(startingTime, 23, 60 + 15, 2 * 60 + 23, 2 * 60 + 58);
        return new String[]{"", "", "", ""};
    private static String[] commonTime3(int courseType, Date startingTime) {
        if (courseType == COURSE_OLD)
            return generateTimes(startingTime, 51, 60 + 55, 2 * 60 + 46, 0);
        if (courseType == COURSE_NEW)
            return generateTimes(startingTime, 2 * 60 + 22, 3 * 60 + 10, 0, 0);
        if (courseType == COURSE_EDEN)
            return generateTimes(startingTime, 26, 60 + 27, 2 * 60 + 43, 3 * 60 + 22);
        return new String[]{"", "", "", ""};
    public static String[] commonCourse1(int courseType) {
        if (courseType == COURSE_OLD)
            return new String[]{"5 Tee", "� House", "14 Tee", ""};
        if (courseType == COURSE_NEW)
            return new String[]{"� House", "15 Tee", "", ""};
        if (courseType == COURSE_EDEN)
            return new String[]{"3 Tee", "7 Tee", "� House", "16 Tee"};
        return new String[]{"", "", "", ""};
}

What's the meaning of this!!! (your user icon)

Okay, it is killing me. I simply must know why everyone picked their icons. Some of you have had discussions about them in random posts, but that is very hard to find.
Ben, Why the teddy bear with the sparkle?
Tst, are you thinking what I'm thinking? (yes brain, but where are we gonna find a all night tatoo parler on this side of town?)
I'll go first, I drew my monitor with the LabVIEW 8.x style splash screen.... not very creative, but when you stare at it for 8 hours a day it kinda gets embedded.
Matt Holt
Certified LabVIEW Architect

Diagonal is a great idea. How about a slight pan for that extra dynamic effect.
(I also think it is important to keep a long delay on the first frame to increase the surprise and make it less distracting. )
Message Edited by altenbach on 09-11-2007 12:03 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
target2.gif ‏4 KB

What's the meaning of this?? (runtime error)

Hey guys!!!
I've got a problem with a program consisting af several classes. I can compile it but when I wanna run it the following message appears:
[error] Exception occurred during event dispatching:
[error] java.lang.NullPointerException
[error]      at java.util.StringTokenizer.<init>(StringTokenizer.java:122)
[error]      at java.util.StringTokenizer.<init>(StringTokenizer.java:152)
[error]      at org.gjt.sp.jedit.GUIUtilities.loadMenuBar(GUIUtilities.java:75)
[error]      at org.gjt.sp.jedit.View.<init>(View.java:686)
[error]      at org.gjt.sp.jedit.jEdit.newView(jEdit.java:1671)
[error]      at org.gjt.sp.jedit.jEdit$1.run(jEdit.java:385)
[error]      at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:154)
[error]      at java.awt.EventQueue.dispatchEvent(EventQueue.java:337)
[error]      at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:131)
[error]      at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:98)
[error]      at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:93)
[error]      at java.awt.EventDispatchThread.run(EventDispatchThread.java:85)
Could anybody help me, please?!?
Cheers,
Tom

That my friend, is a gen-u-wine NullPointerException. What it means, is that you're trying to use an object(reference) that points to null.
Observe:Object o = null;
o.toString();        // Voila, a nullpointerexception for your convenience.

What's the meaning of this error code: -1073807195

I'd tried to connect my tektronix tds210 to my computer via gpib and get the error code: -1073807195.
What's wrong?

Hello,
I have the same problem with this error. I use counter HP 53131A to continuous count frequency to the laptop. I use USB/GPIB Interface 82357A from Agilent. Driver is OK, in Visa Assistant i could count frequency without problem. But when I try your simply example code for GPIB (in attachment), Labwindows show me this error I have Labwindows 8.0, NI-VISA 4.0, NI-VISA 4.0 Runtime and NI488.222 installed.
Please help me, I don't know, what can I do, I don't want to be kicked from the school Thank you, Martin.
Attachments:
gpib.c ‏2 KB

What's the meaning of this message when trying to update Mountain Lion? The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)

Trying to update Safarin from the App store. Got an error message.
"(NSURErrorDomain error-3001.)(102)

The file (Safari update) you wish to download cannot be found at the specified location.

What is the meaning of the dotted circle next to a song on a playlist?

Why is there a dotted circle next to certain songs on a playlist that reflect on my iPhone on iTunes and these same songs after syncing are not reflecting on my iPhone?

What is the meaning of this -
Object[] x = {new String[]{"a","b"}};
I have a function which takes Object[] as a argument.
And I have data structure like this -
Name = Zoolander
Name = Hansel
Name = Mugatu
I am not interested in the Name part. This has to be
converted to - Object[] x = {new String[]{"a","b"}}
It works if I hard code the values like this -
Object[] x = {new
String[]{"Zoolander","Hansel","Mugatu"};
Thanks in advanceI don't think you need the outer set of braces:String[] x = new String[]{"x","y","z"};will work, and does exactly what you expect it to do.
RObin

HT201442 why my iphone could not be restored ? and what is the meaning "this device isn't eligible for the requested build"

why my iphone could not be restored ? and what is the meaning "this device isn't eligible for the requested build"

Covered in this support article:
http://support.apple.com/kb/ts4451
Which, you used to get here. You need to read the article & go through the troubleshooting steps.

MM - PO - what is the meaning of this button?

Similar Messages

Maybe you are looking for