MM:Price Change did not Carry forward from previous to current period

Hi Gurus,
Client has Reported that the Weighted Average Cost (WAC) was automatically  reset to Zero in a particular Period and didn’t carry over from the previous period , The initial analysis was done and it was found that there is a configuration for “Price Change in Previous Period and not in current Period” which has to be maintained for the company code
The question is whether this configuration (“Price Change in Previous Period and not in current Period”) impacts both the Standard Price and
WAC or does this impacts only Standard price
Any pointers will be helpful, Will also Award Points
Regards

Hi Gurus,
Client has Reported that the Weighted Average Cost (WAC) was automatically  reset to Zero in a particular Period and didn’t carry over from the previous period , The initial analysis was done and it was found that there is a configuration for “Price Change in Previous Period and not in current Period” which has to be maintained for the company code
The question is whether this configuration (“Price Change in Previous Period and not in current Period”) impacts both the Standard Price and
WAC or does this impacts only Standard price
Any pointers will be helpful, Will also Award Points
Regards

Similar Messages

  • Carry forward from previous month

    Experts
    I want to carry forward from the closing flow of last month but the system copy the value from the last month of previuos year if I use the BPC copy opening business rule.
    Any way to achieve this?
    I am on BPC 10.
    Thanks

    Hi,Johnson
    In the Category dimension, there are two properties for
    this.
    OPENING_YEAR: blank or year from which to
    read the opening balances from (absolut value like « 2006 » or relative value
    like « -2 »,« +3 »). If blank, the balances are taken over from the last year
    OPENING_PERIOD: blank or specific period from which to read the opening balances from
    (absolute value like « MAR », or relative value like « -1 », « +4 »). If blank, the balances are taken from the last period of the year (December).
    To achieve this,set OPENING_YEAR to be +0 and OPENING_PERIOD to be -1.
    Have a  try.

  • Balance not carried forward when changing fiscal year in Report Painters

    Hello guys,
    Im using report painter (FGI3) to create my financial statement report, when i change to fiscal year 2009, the balance in my balance sheet is not carried forward to year 2009, its only shows the the movement.
    Assume, the total asset in dec 2008 is 10million, transaction in januari is -900.000,
    the total asset in januari 2009 should be 9.1 million, but it only shows -900.000
    Sorry my english not so good
    Anyone can help..
    Thanks.
    Edited by: rama dazkia on Feb 2, 2009 3:16 AM

    Thanks for the reply,
    I've already doin the year-end activities, if i see the balance in F.01 it is correct
    but in my report painters especially in january 2009, it only shows the difference
    FYI, i using report painters FGI3, FGI5
    Thank you

  • HT201240 I have a new macbook pro that did not have a disk, OS X was pre installed  so how can i change the administrators name and password, it did not migrate properly from my hard drive.., so how do i

    I have a new macbook pro that did not have a disk, OS X lion 7.3.4 was pre installed  so how can i change the administrators name and password, it did not migrate properly from my hard drive.., now there is some mysterious administrator name and or password??

    See #5
    Step by Step to fix your Mac

  • G/L account balance not carried forward next year

    Dear All Expertise fourm,
    I found in my report(S_alr_87012277) some G/L account is not carry forward into 2009 from 2008. But in 2008 there has balance.
    It should come in 2009 "Bal carried Fwd". I had done some process for this but nothing change.
    I did block input G/L account from FS00
    I execute program RFSEPA01
    But not any change.
    Can anybody advice me?
    Thanks & B/R
    Bishnu

    Hi
    Do the Balance Carry Forward once again, some times it may not CarryForward the Balances.
    Balance Carry Forward for General ledger -->F.16/FAGLGVTR
    If New GL is activated kindly do with FAGLGVTR
    Regards
    Venkat

  • I recently dropped my 4th gen ipod touch and i want to know how much it will cost to get it replaced by apple. PS i did not buy it from apple i bought it on ebay so it doesnt have a warrenty

    I recently dropped my 4th gen ipod touch and i want to know how much it will cost to get it replaced by apple. PS i did not buy it from apple i bought it on ebay so it doesnt have a warrenty

    You can find the replacement costs by Apple here: http://www.apple.com/support/ipod/service/prices/

  • Just upgraded Elements 9 to 10.  my Neat Image plugin did not carry over.  Can anyone help me?

    Just upgraded Elements 9 to 10.  My neat image plugin did not carry over.  Can anyone help me?

      Go to Program Files or on 64 bit systems Program Files (x86) and find the file NeatImage.8bf in the PSE9 plug-ins folder. Copy it to the PSE10 plug-ins folder.
    Alternatively go to Program Files\Neat Image and copy the file from the source.
     

  • Change did not propagate to Standby

    Hi,
    Recently I re-sized my UNDO & TEMP tablespaces (created a new tablespace and deleted the old one) on a 4-Node cluster database running on Linux x64 with 10.2.0.4. This is a production database configured with a 4-Node Standy (with same configuration). Surprisingly, the change was implemented on the Primary cluster, but it did not propagate to the Standby. Any idea why!?
    I clearly remember from before, that when I deleted a normal tablespace from the Primary cluster, it got deleted from Standby cluster as well. But this time the change did not implement.
    Thanks in advance,
    Arindam

    We have ASM Storage system. And yup, the configuration is identical @ the PRIMARY & STANDBY end (both are 4-node RHEL Cluster running 10.2.0.4 RDBMS).
    Ravi - Below is the result of your queries.
    STANDBY:_
    SQL> select inst_id,process,status,thread#, sequence# from gv$managed_standby;
    INST_ID PROCESS STATUS THREAD# SEQUENCE#
    1 ARCH CLOSING 4 37059
    1 ARCH CLOSING 4 37060
    1 MRP0 WAIT_FOR_LOG 3 21524
    4 ARCH CLOSING 4 37061
    4 ARCH CLOSING 3 21521
    3 ARCH CLOSING 1 25087
    3 ARCH CLOSING 4 37063
    3 RFS IDLE 1 25088
    2 ARCH CLOSING 3 21523
    2 ARCH CLOSING 2 17502
    2 RFS IDLE 0 0
    INST_ID PROCESS STATUS THREAD# SEQUENCE#
    2 RFS IDLE 0 0
    2 RFS IDLE 0 0
    2 RFS IDLE 4 37064
    2 RFS IDLE 0 0
    2 RFS IDLE 2 17503
    2 RFS IDLE 3 21524
    SQL> select thread#,max(sequence#) from v$log_history group by thread#;
    THREAD# MAX(SEQUENCE#)
    1 25087
    2 17502
    3 21523
    4 37063
    SQL> select thread#,max(sequence#) from v$archived_log group by thread#;
    THREAD# MAX(SEQUENCE#)
    1 25087
    2 17502
    3 21523
    4 37063
    PRIMARY:_
    SQL> select thread#,max(sequence#) from v$archived_log group by thread#;
    THREAD# MAX(SEQUENCE#)
    1 25087
    2 17502
    3 21523
    4 37063
    Hope this helps.
    Arindam

  • HT1848 i formatted my computer and now i would like to sync my music from my iphone back to the computer, is there any way to do this? i don't want to loose my music. p.s. all my music that was on the computer was there privately, i did not get it from it

    i formatted my computer and now i would like to sync my music from my iphone back to the computer, is there any way to do this? i don't want to loose my music. p.s. all my music that was on the computer was there privately, i did not get it from itunes.

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Warning ALSB Statistics Manager BEA-473007 Aggregator did not receive statistics from ...

    Hi,
    I am using cluster with osb_server1 and osb_server2. While starting the servers, I am facing below error on Managed Server(osb_server2) but only warning on Managed Server(osb_server1).
    Warning on managed server1(osb_server1)
    <Warning> <ALSB Statistics Manager> <BEA-473007> <Aggregator did not receive statistics from [osb_server2] for the aggregation performed for tick 1855320.>
    Error on managed server2(osb_server2)
    <Nov 24, 2011 11:23:00 AM UTC> <Error> <ALSB Statistics Manager> <BEA-473003> <Aggregation Server Not Available. Failed to get remote aggregator
    java.rmi.UnknownHostException: Could not discover URL for server 'osb_server1'
    at weblogic.protocol.URLManager.findURL(URLManager.java:145)
    at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.getInitialContext(WlsRemoteServerImpl.java:94)
    at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.lookupJNDI(WlsRemoteServerImpl.java:54)
    at com.bea.wli.monitoring.statistics.ALSBStatisticsManager.getRemoteAggregator(ALSBStatisticsManager.java:291)
    at com.bea.wli.monitoring.statistics.ALSBStatisticsManager.access$000(ALSBStatisticsManager.java:38)
    Truncated. see log file for complete stacktrace
    Please provide your solutions here.
    Thanks

    Hi,
    I am using cluster with osb_server1 and osb_server2. While starting the servers, I am facing below error on Managed Server(osb_server2) but only warning on Managed Server(osb_server1).
    Warning on managed server1(osb_server1)
    <Warning> <ALSB Statistics Manager> <BEA-473007> <Aggregator did not receive statistics from [osb_server2] for the aggregation performed for tick 1855320.>
    Error on managed server2(osb_server2)
    <Nov 24, 2011 11:23:00 AM UTC> <Error> <ALSB Statistics Manager> <BEA-473003> <Aggregation Server Not Available. Failed to get remote aggregator
    java.rmi.UnknownHostException: Could not discover URL for server 'osb_server1'
    at weblogic.protocol.URLManager.findURL(URLManager.java:145)
    at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.getInitialContext(WlsRemoteServerImpl.java:94)
    at com.bea.alsb.platform.weblogic.topology.WlsRemoteServerImpl.lookupJNDI(WlsRemoteServerImpl.java:54)
    at com.bea.wli.monitoring.statistics.ALSBStatisticsManager.getRemoteAggregator(ALSBStatisticsManager.java:291)
    at com.bea.wli.monitoring.statistics.ALSBStatisticsManager.access$000(ALSBStatisticsManager.java:38)
    Truncated. see log file for complete stacktrace
    Please provide your solutions here.
    Thanks

  • I would like to update Pages from 4.1 to 4.2. I did not purchase it from the App Store but installed it with iWorks. How do I complete the upgrade?

    I would like to update Pages from 4.1 to 4.2. I did not purchase it from the App Store but installed it with iWorks. How do I complete the upgrade?

    The iWork 9.2 updater is for those using Mountain Lion. Why do you want to update to Pages 4.2 if you're still running Lion? There is no benefit & many users have had problems.
    That being said, you must make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. All three applications must be in the iWork '09 folder in Applications. That iWork folder must be named iWork '09. If it doesn't have the '09 Software Update won't find them & the updaters won't work.
    Now, choose Software Update from the Apple menu, from System Preferences or launch the Mac App Store & click Updates. You should get a window similar to this screenshot. Now click the Update button next to iWork 9.2.
    Alternatively, you can download the standalone update here.

  • Aggregator did not receive statistics from [sb03] for the current view

    I'm receiving a warning message in a BEA Aqualogic Service Bus console "Aggregator did not receive statistics from [sb03, sb05, sb06, sb04, sb02, sb01] for the current view".
    I don´t have any idea what is the root cause of this issue.
    Thanks,
    Norberto Enomoto

    Norberto,
    I've found this link with a list of SB Runtime Messages.
    http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/messages/alsb/kernel/l10n/ServiceDomainMBean.html
    One of this refer to the problem you're having:
    BEA-473051
    Error: Aggregator did not receive statistics from servers for the current view
    Description
         There is a communication failure between Aggregator server and other managed servers. One of the managed servers failed to send statistics to the managed server on which Aggregator is running.
    Cause
         Communication failure between managed servers.
    Action
         Wait for some time and try again.
    Att.
    José Compadre Junior
    Edited by: user10076953 on 22/03/2010 11:09
    Edited by: user10076953 on 22/03/2010 11:09

  • ThinkCentre m58 did not start booting from usb!!

    heloo ..
    i have ThinkCentre m58 , i tray to format it by usb bootable windows but the pc did not start booting from usb!!
    my usb have windows insid it.

    Thanks for your effort!!
    I deleted solaris and I'll continue to use Debian

  • My Photoshop CS6 Extended did not transfer properly from Macbook to iMac. I am being asked to 'buy' it.

    My Photoshop CS6 Extended did not transfer properly from Macbook to iMac. It was treated as a trial and now I am being asked to 'buy' it.

    I have run into this before. Click on "license this product" on the Trial countdown screen.
    Sign in if asked with your Adobe ID/Password  The Cloud is an option for those who do not have a serial number license. It isn't mandatory.
    Then look for the "I have a serial number" option.
    And enter it from there and activate. Your trial should convert to Photoshop Standard or Extended depending on the serial number.
    Of course migrating or restoring from Time Machine does break licensing.
    So aside from uninstall, run the Cleaner tool Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    and use Disk Utility to verify your disk and run a "Repair Permissions" before install.

  • Cannot download update: am told it is installed on my mac and i did not buy it from the apple store--i did. any help there?

    cannot download update: am told it is installed on my mac and i did not buy it from the apple store--i did. any help there?a

    see this thread
    App store won't let me update Final Cut Pro X

Maybe you are looking for