MM_SPTOCK - Problems when Material assigned to more than one Batch Id

Hi Experts,
We are using MM_SPSTOCK object for archiving Batch Records. While executing this Archiving object ,Suppose we have a case where there exists a material assigned to more than one batch .Lets Say B1 and B2 for Material M1. If we are interested to archive the Batch record M1 B1 then M1 B2 also getting archived even though the batch B2 is not specified in the selection criteria of MM_SPSTOCK .This leads to Data inconsistency.Is there anything that we need to do in order to save the second batch record getting archived.Please suggest.Let me know if you need any information
Kind regards,

Hi All,
Let me know if you come across this situation anytime and have a work around for this.

Similar Messages

TS4123 This is not correct solution. I have fresh copy of Windows 7 64 bit and I have the same problem. Autorun only shows the Bonjour service. It started when try to sync more than one iphone.

This is not correct solution. I have fresh/new copy of Windows 7 64 bit and I have the same problem.
Autorun only shows the Apple Bonjour service. It started when try to sync more than one iphone over WiFi. I have two iphones and an iPad. I turned off syncing over WiFi and still has high CPU utilization. One of the CPU's is pegged at 100%. It is the AppleMobileDeviceService.exe process.

For the record, I then followed the suggestion of MarcDCMB in https://discussions.apple.com/thread/4291206 of just manually restarting the Apple Mobile Device service in Windows services.msc once each time after starting iTunes and the service no longer hogs CPU after that service restart. Not too painful as a work-around, and apparently an effective one, but clearly not a solution to the problem. Again, as above, all the other solutions didn't work for me and I have no conflicting software as far as I can tell. So you'd have to say this Apple's problem.
Also FTR, I am still on the 5.2.0.6 version of the Apple Mobile Device Support MSI and I don't know if that is relevant to this work-around working but my sense is that it is NOT relevant. I'll report back on this thread if I re-upgrade and the problem returns in spite of the service-restart approach.

How to add the rows formatted as table headings, Tables headings are repeated when a table spans more than one page.

Hi all,
i am facing problem while generating Test Result word document after successful execution of TestStand.
The Problem is :
i want to add rows Formatted as table headings, table headings are repeated when a table spans more than one page(marked as Red).
Example:
Page No. 1
|     Test case Number | Test Step number      |
|      100                         |            100                   |
Page No. 2
|     Test case Number | Test Step number      |
|      200                         |            300                   |
Test Result word document should generate with Table headings(marked as Red) in every pages of the document, but i am not getting as per above example.
Please through light on this.
Regards,
Susa.

Hi Santiago,
Thank you very much for your valuable reply.
i want to generate MS-word report for TestStand after successful testing using MS-word2000.
Test report contains Actual values, Expected values and Pass/Fail status.
In my program i have customized all fields i can able to generate test report which contains Verification engineer name , test mode, test date, start time, end time Actual values, Expected values and Pass/Fail status.etc....
To put all values of test case number, Test step number, Actual values, Expected values and Pass/Fail status in to table for each time, i will
insert a row into table every time values arrives, once the table exceedes its page size it moves to the next page, next page should start with table row header but it start with values of above said parameters.
so i'm not able to repeat table row header for each page.
Please find the attached file for your reference.
Attched file expected.doc :   This file contains what i wanted to generate MS-word report. Here table row header "Test Case Number and Test Step Number " is repeated in second page.
Attached file Actual output from source code.doc   : This report generated from the source code. Here table row header "Test Case Number and Test Step Number" is not repeated in second page.
Do you know any property to set "repeat as header row at the top of each page" using MS-word ActiveX in CVI/Labwindows.
i think this information is sufficient for you,
Still if you need some information please ask me.
Thanks
Susa.
Attachments:
Actual output from source code.doc ‏25 KB
expected.doc ‏26 KB

Plant assignment to more than one sales org

We have a business process where certain products made in one plant have to be sold to two sales organizations depending on certain conditions defined in the sales view of the material master. How can this be achieved? Currently system does not allow for plant assignment to more than one sales org?

Hi,
Have you checked in OVX6 ? You can assign a given plant to different Sales Org. - Distribution Channel.
Select the Sales Org. - Distbn. Channel, click on Assign & in the pop-up box select the plant.
Regards,
Vivek

Workflow task Assignment to more than one agent

Hi
Does anyone know about Workflow task Assignment to more than one agent.
This mena at one point there will be more than one approver..
Regards,
Anand

Hi,
Have you checked in OVX6 ? You can assign a given plant to different Sales Org. - Distribution Channel.
Select the Sales Org. - Distbn. Channel, click on Assign & in the pop-up box select the plant.
Regards,
Vivek

Can a personnel area be assigned to more than one company code?

Hi experts,
Can a personnel area be assigned to more than one company code?
Regards,
Anita George

Yes, as Siva said it is not possible.
Between personnel area and company code -
many to one mapping is allowed but one to many is not allowed. That is you can map more than one PA to 1 company code but 1 PA can not be map to more than one company code.

Material Master in more than one plant /purchasing group/Valuation Class

Hi All,
How to maintain a Material Master in more than one plant /purchasing group/Valuation Class......
Points shall be awarded accordingly,
Regards,
Rounak

in mm01 u can extent the material for new plant
first creat all the views say purchasing accounting basic view etc for one plant
the go to MM01 put same materal code and select the views purchasing and accounting
now put the other plant number
enter
and put the purchasing and valuation class etc asd save
thuis u can extend the material to other plant
reward if usefull
Message was edited by:
Umakant Bhangale

Asset Master to be assigned to more than one WBS element

Hi Guys
I have a scenario in which a Asset should be assigned to more than one Project, i.e. WBS Element.
Is it possible by any way to assign a asset to more than one WBS element.
Warm Regards
Bala

Hi Vijay Kumar
Your right, but my situation is different.
Take an example, i have server in a software company, that will be used for more than one project. In this case the asset number is the same as the same asset is used for different project at a given point of time
Warm Regards
Bala

When I update applications more than one account appears. How do I delete second account

when I update applications more than one account appears. How do I delete second account?

I'm wondering if you have to Apples IDs or iTunes IDs and have puchased apps on both accounts.I have the same issue, and must supply both accounts' passwords in order to update apps. From my research here, there's no way to merge the two accouts. It is aggrivating, indeed.

Running more than one batch on the same resource at the same time.

Dear all,
as i'm working in paper industry , i have to release more than one batch at the same time using batchable resource , but i have problem in declaring the resource usage , if i run 3 batches on the same resource for i hour , what is the resource usage for each batch and how the system will help me to know that.
Regards.

Hi
My question is If I run 3 batches on the same resoures......what do you mean
Assume you have 3 batches names b001/boo2/boo3
for B001 you have planned resoues as 1, but Actual resouce count is 2
for B002 you have planned resourse as 3 but Actual resource count is 3
for B003 you have planned resourse as 2 but actual resouree count is 2
Here the the Acutal resource usage will calculate as per the actual count and that too within Batch only. And it will not consolidte Batches altogehter.
Rgds
Raj

Syncing Issues when trying too sync more than one thing

since the 8.0.2 update syncing has been real glitchy for me lately when i try too sync my iphone and ipod. for whatever reason, i cant sync more than one thing at the same time. for example if i have my iphone still plugged in, then plug in my ipod too update it, soon after the itunes would give me a unknown error then lock up. specifically this error. http://img407.imageshack.us/my.php?image=unknownituneserrorjq3.jpg
sometimes it would say iphone, sometimes it would say ipod.. that error would just depend on which was plugged in first.
its just weird, windows detects both drives fine. and if i have them in one at a time itunes will be able to read and sync that device. unless this is a direct problem with my computer which i dont think, i dunno. both devices work in any usb port. it just doesnt like them both being in at the same time.
this happening with anyone else?

See this support doc, iPod for Windows: Only works with one iPod at a time. The title pretty much says it all. If it's worked for you before then it's more likely by luck than design.
tt2

Reader X shuts down when trying to open more than one pdf, or when clicking certain categories in settings

Until a few weeks ago I have never had a problem opening more than one pdf at a time. Now Reader just shuts down when I try to do so. The same thing happens when I click on the yellow highlighted categories in settings. All the other categories open fine.
Appreciate the help of anyone who can help me solve this.

I guess you didn't know, but yes you can close more than one app at a time. You can close up to 3 apps at a time in the new IOS7 on the iPhone. Try opening at least 3 apps and then double click the main button to see what apps are opened. Then swipe to the left to see the three of them on your screen. Your not gonna see the ones on the side entirely but you can still put all three fingers on them, then simply swipe them up and it closes them up.
The thing is, when you have let say 10 apps open, and you start using this trick, some of them will stay open meaning you swiped them up to close them down but the bottom icon stays there. When you come back to your main IOS desktop and then go back to close the programs that you have opened, you can see that those apps are still opened. There is only like 2 or three out of all the 10 you had opened that stayed open, but none the less it's a bug in the system I presume.
You also asked about the icon at the bottom. When you are seeing what apps are opened, there is always a small icon at the bottom and on top you have a representation of what you were working on, and that is the part you swipe up. But often time the bottom icon will stay opened after swiping 2 or 3 of the apps to close them.

Problems installing SSL certificates for more than one alias on iMS 5.2

I have a problem to getting encyption on IMAP/HTTP/SMTP when they are on the same server. I only getting one SSL certificate installed by the Netscape console wizard, and therefore only one alias.
Let's say I have 3 aliases to the same server just for the scalability, imap.vxu.se, smtp.vxu.se and mail.vxu.se for http (https). Then I can only have one certificate installed at the same time, for example https://mail.vxu.se. And the others, like (S)IMAP I getting a dialouge that says the hostname doesnt is the same as the registred in the certificate. How do I solve this? Is there some possibillity to install more than ONE certificate, so I can have one certificate for each alias?
Environment: Full 420R, Solaris 8, iMS5.2
Thanks in advice

Although I completely agree the comments that suggestion this is not a great configuration idea, the error you are seeing ("...bean not found...") likely has nothing to do with the configuration - at least not as mentioned. My first guess is that if you are running the same exact form (FMX) as you ran for your first test then there should be no error. The only way such an error would appear is if the proper jar files are not being pulled to the client JRE or if the fmx was not properly generated. Be sure you are including config=webutil in the URL or that you have added the Webutil configuration info to your own named configuration section of formsweb.cfg
Regardless, if this is a Windows machine, the probability of having problems with multiple installations of the same version is high. Consider that the system PATH, CLASSPATH, ORACLE_HOME and various other system variables needed by the server side of the installation will overlap for each installation. This will cause problems. On the client side, attempting to download jars of the same name from the same server, but which are not actually the same files will confuse the JRE. If the JRE detects that a file which it has already cached is coming from the same server (host) then it will not attempt to pull it again. This will be a problem if the jars are not exactly the same in both installation. Making the problem worse is that you may not be able to easily determine from which installation the jars (or any files) were obtained.
So. as a general rule, regardless of whether multple installations can co-exist, I would not recommend it. This is especially true on a Windows platform.

Some apps stay open when trying to close more than one app at a time in ios 7

I tried closing down 2 or 3 app at a time in IOS7 and there's always one or two that stay open. The icon at the bottom is still there but I've already swiped it up to close it. When I go out of the closing function and come back I see that they are still open and I need to close them again. I tried this on many ipads, iPhones and ipod touch and they all act the same way.
Chris

I guess you didn't know, but yes you can close more than one app at a time. You can close up to 3 apps at a time in the new IOS7 on the iPhone. Try opening at least 3 apps and then double click the main button to see what apps are opened. Then swipe to the left to see the three of them on your screen. Your not gonna see the ones on the side entirely but you can still put all three fingers on them, then simply swipe them up and it closes them up.
The thing is, when you have let say 10 apps open, and you start using this trick, some of them will stay open meaning you swiped them up to close them down but the bottom icon stays there. When you come back to your main IOS desktop and then go back to close the programs that you have opened, you can see that those apps are still opened. There is only like 2 or three out of all the 10 you had opened that stayed open, but none the less it's a bug in the system I presume.
You also asked about the icon at the bottom. When you are seeing what apps are opened, there is always a small icon at the bottom and on top you have a representation of what you were working on, and that is the part you swipe up. But often time the bottom icon will stay opened after swiping 2 or 3 of the apps to close them.

Auto creation of child requests when parent request has more than one group

Hi,
I have created a request dataset which has a child form for AD Group. While raising a request, if I add more than one group, how to process the approval flow. Because I will be having different different approvers for different different groups. Is there any way to create child requests automatically when we submit a request with more than one group? I am using OIM 11.1.1.5.0.
I know in OIM 11g, whenever user raises request for more than one beneficiary/target-resource then OIM breaks that request into Child Requests. But this is not happening when I add more than one group in the same resource. Do I need to write my own code for DataValidator to split parent request into child requests upon validating child form? If so, is it going to impact the existing feature which is creating child request when parent has more than one user/resource.
Please let me know.

No not possible OOTB in current version. Check {thread:id=2318652} for more information.
-Bikash

MM_SPTOCK - Problems when Material assigned to more than one Batch Id

Similar Messages

Maybe you are looking for