MM-SRV:  CAT2 Posting to Network Activities for external employees

Dear All
I am working on an ECC6.0 implementation and trying to post CAT2 timesheet data to a Network Activity for external employee.  I have used this process extensively on 4.6c and it works fine, even though SAP Note 653209 says this is not possible.
Before I contact SAP directly I wondered if anyone else out there has overcome the problem of booking to a NWA for external employee.  My error messages are LR103 “Enter an account assignment”.  Strangely, if the plant is different the posting is allowed but no NWA assignment is transferred during CATM.
Thanks for any help anyone can give.
Jules

Hi,
In control key (PS02 for ext. act.) settings, Tcode: OPSU, you can define confirmation parameter. Generally it is maintained as "Confirmation possible but not necessary".
You are already aware about this setting and there is no specific different setting for ext. act. in CATS entry profile.
Reward points if useful.
Regards
Edited by: Shrikant Rakate on Dec 19, 2007 8:23 AM

Similar Messages

  • CAT2 duplicate PS network activities showing in personal template

    Hello,
    We are using SAP_APPL 4.7, support pack 22 and SAP_HR 4.7, support pack 10. 
    I don't know much about CATS & PS, but I provide our end user support.
    We are using transaction CAT2 to report hours worked against PS network activities.  We have run into a glitch when using the 'Save as Template' feature which creates a personal template.  In our situation a person will add a network activity in the data entry area of CAT2.  After they input their time they press the 'save as template' icon.  Then when they enter CAT2 the following week to report their time, the network activity is still listed in the data entry area for them to enter their time.  This part is working fine. 
    Now let's assume someone goes into project systems (CJ20N) and changes the network activity description (which shows in CAT2 as a informational output field).  The person entering time then goes into CAT2.  Their template is showing the network activity in the data entry area with the old description.  When they input their hours and press enter, the new network activity description is pulled in on the time sheet, overlaying the old original description.  At this point they still see one entry in their time sheet.  Now here is the glitch - if the person goes in the following week to enter their time, they see two entries in the data entry area - one with the old description and one with the new description.  Both records show the same network activity number, but now 2 records are appearing in their template because the description changed.
    Our 'work around' has been to have people delete their personal template and recreate it from scratch if they see these 'double entries' due to a description change.  Does anyone know a better way to handle this or if there is 'fix' that we can apply to correct this issue so we don't see two records?  I did some looking in OSS, the only duplicate entry reference I could find was OSS note 1058293, however it was related to WBSs and was not for our release.  Can anyone help? Thanks!

    Hi Debbie.
    When writing into CAT2 screen data is pulled when pressing enter. If a person has a wrong cost center, e.g., this cannot be changed by changing the persons cost center only. All the hours have to be deleted and rewritten for CAT2 then pulling the correct cost center.
    Considering this behaviour of the system it would be a consequence that CAT2 pulls the new text but lets the existing entries unchanged.
    You have not said anything about the written hours. Are these duplicated as well? If you open an OSS because of this I'd be curious to hear about the answer.
    Best regards.
    Jens

  • How to remove a network activity for one employee from the worklist?

    Hi,
    We are using the SAP project system where project resources are assigned network activities. In the worklist in the ESS timesheet, the assigned network activities are displayed for the employee. The problem is when several employees are assigned for a network activity, and one of them no longer should register hours on this activity. How can you remove the assignment (using dates etc.) for only one person so that the network activity no longer is present in his worklist in the timesheet?
    Regards,
    Petter

    Well for this pernr you need to have a special coding to check for network and pernr.
    other would be a simple way using cats0003 to validate data an employee records here you can have a individual check
    for this pernr that he doesnt record for this activity and throw an error when he does! this is simpler

  • PS ; Network Activities (Internal & external) monitoring or evaluation

    Hi
    Can any one guide me how to  pull out a std report for viewing the dates maintained in Activities (Internal & external) in Network, planned dates vs actual dates of confirmation of activities.
    Pl help
    Srihari

    Hi Shrihari,
    U can use CN41N to get dates maintained in Activities (Internal & external) in Network, planned dates vs actual dates of confirmation of activities.
    Thanks & Regards,
    Jatinder Bansal

  • Creation of Multiple Activities for same Employee,same day and same time

    Hi Experts,
    In CRM 2007 I am creating an Activity(e.g Customer Visit) for a particular day for a particular employee. I am selecting the Option "Whole Day".
    When again I am creating another Activity same day and for same employee the ideally system should not allow me to create further activities as I have already scheduled for the whole day but its is allowing me to create as many activities i want irrespective of Time frame.
    I want to block overlappped activities created for  same emloyee same time.
    Can you please suggest me with your ideas inorder to achieve same???
    Regards
    Arup

    Hello,
    If there is no standard solution you can implement the BADI : CRM_ORDERADM_H_BADI
    Here you can see when a new activity is created, and then maybe you can cancel the creation or even replace the new activity by the existing one.
    Regards,
    Benoî

  • Mapping Network Drive for external user does not work

    I want to map a beehiveonline.oracle.com network drive. I am using https://beehiveonline.oracle.com/content/dav/# as mentioned in the FAQ.
    Using https://beehiveonline.oracle.com/content/dav/ (without the #) does not work either.
    I am able to map this network drive when using [email protected] as user.
    However when trying to do this for the user [email protected] I am not able to map the drive.
    I am testing this in order to simulate the client to map the network drive.
    Logging on the beehiveonline with the user id [email protected] works fine.
    Your help will be greatly appreciated.

    Ah, We have had one other case of this where an account can access BeehiveOnline OK but cannot get the webDAV to work.
    I did notice a few login failuers stating your account did not exist on the system. This can sometimes happen if there is a conflict between username and loginid - I have set them to be the same and this may help.
    Try again and let me know how it goes.
    Phil

  • Network location for external table's file

    Hi,
    I am trying to import data from a csv file in oracle 10g database. I can successfully upload data from a csv file located on server itself using external table. But when I redefine directory object on a folder on network location, it doesn't work. Is that a limitation with external tables to access data from a file on network location.
    Any clarifications and suggestions would be highly appreciated.
    Thanks,
    Aniket

    Hi Nicolas,
    I created a directory object pointing to a folder on a system(Other than Oracle 10g server) in the network. This folder is shared and can be accessed from the Oracle 10g server. When I create an external table with the default directory as the shared folder it couldn't read the csv file from that folder ( Shared folder on another system).
    But when I redefined the directory object on a local folder which was on Oracle 10g server, it could read from csv file in the local folder using external table.
    My understanding is using external tables, one can only read files that are on the local machine i.e. Oracle 10g server and not on a different system.
    Please correct me if i am wrong. Any further suggestions would be highly appreciated.
    Regads,
    Aniket

  • Just FYI, new blog post "New and Revised Networking Technologies for Windows Server Technical Preview"

    Just FYI, new blog post "New and Revised Networking Technologies for Windows Server Technical Preview" at
    http://aka.ms/xb9l0w
    Thanks -
    James McIllece

    Hi,
    Thanks for your good sharing.
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Re: Pre & Post activities for homogeneous system copy

    Dear All,
    can any body help with pre & post activities for homogeneous system copy
    Thanks in advance
    Best regards,
    khan

    Hi,
    Use Oracle Database specific method to perform homogeneous system copy.
    Along with this reference official [system copy guide|https://websmp209.sap-ag.de/~sapidb/011000358700000416402008E.PDF], You can also refer this [useful doc|http://www.basisconsultant.com/component/remository/Sytem-Copy-Guides/Homogeneous-System-Copy-using-OnlineandOffline-Backup/] for the same to have all required pre-post activities information with more details.
    Regards,
    Bhavik G. Shroff

  • Update User Status as FIU in CJ20N for Networks & Activities

    Hi Friends,
       I need to Update the User Status as FIU for all Networks & Activities under a WBS Element
    I am executing the function module I_CHANGE_STATUS and able to set the status in Database level
    but when i am opening that particular Network in CJ20N and watching the Status
    it is not updating to FIU
    Please Guide me ASAP
    Thanks,
    Ganesh

    hi dinakar,
    Am using the TCODE : RECN, when i update or modify the real estate contract  ex: name to name1 when i save... the status shoud shoud change from create to modify as i have modified.
    i have seen your answer and i am sure that you can help me in this case.
    your help is much appreicated....as it is SAP STANDARD i have a badi called BADI_RE_CN_CN. can i use this badi... if so where can i change and add my code... as i am new to badis your detailed info will be really helpful.
    looking for ur valuble answer,
    thanks,
    pasala.

  • Programme for uploading the network activities & activities relationship.

    Hi Experts,
    Is there any Programme for uploading the network activities & network activities relationship.
    Regards,
    Gagan

    hi,
    if you could stick to several   standard Project templates, use BDC program to uplaod projects referring project standard templayte
    Hope this would help u.
    Regards,
    Sam L.

  • ISSUE: "This domain controller must register a DNS SRV resource record, which is required for replication to function correctly"

    so we currently have three domain controllers set up, two of them on 2012r2 and one of them on 2008r2. prior to any of these domain controllers being added to the domain there was only one, running on 2003r2. the 2003r2 server was up and running when the
    first 2012r2 was added and that's when running 'dcdiag /e /c /v' would yield an issue with "_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local" in the DNS portion of the diagnostics, specifically:
    TEST: Records registration (RReg)
    Network Adapter [00000010] Microsoft Hyper-V Network Adapter:
    Error:
    Missing SRV record at DNS server 192.168.22.4:
    _ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local
    after adding the second 2012r2 to the domain, this issue is still there... adding the 2008r2 server to the domain and running BPA it gives the following:
    Title:
    This domain controller must register a DNS SRV resource record, which is required for replication to function correctly
    Severity:
    Error
    Date:
    7/3/2014 11:24:48 AM
    Category:
    Configuration
    Issue:
    The "DcByGuid" DNS service (SRV) resource record that advertises this server as an available domain controller in the domain and ensures correct replication is not registered. All domain controllers (but not RODCs) in the domain must register this record.
    Impact:
    Other member computers and domain controllers in the domain or forest will not be able to locate this domain controller. This domain controller will not be able to provide a full suite of services.
    Resolution:
    Ensure that "DcByGuid" is not configured in the "DnsAvoidRegisteredRecords" list, either through Group Policy or through the registry. Restart the Netlogon service. Verify that the DNS service (SRV) resource record "_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local", pointing to the local domain controller "CM-DC4-NY01.cmedia.local", is registered in DNS.
    More information about this best practice and detailed resolution procedures: http://go.microsoft.com/fwlink/?LinkId=126968
    I've tried scanning and then re-scanning every single entry in DNS Manager and do not see any reference to this specific GUID mentioned, nor do I see any other domain controllers referenced that should not be in there. The two 2012r2 and the 2008r2 domain
    controllers are the only ones listed in DNS Manager... the 2003r2 mentioned earlier failed and was removed.

    Just to chime in, I noticed that you said you have one 2008 R2 DC, and two 2012 DCs.
    I also noticed in the ipconfig /all that all DCs are pointint to themselves for DNS. We usually like to see them point to a partner, then itslelf as the second entry, w hether loopback or by its own IP.
    Based on that, what I suggest to level the playing field by choosing the WIndows 2008 R2 DC as the first DNS on all DCs and only administer DNS using that DC. The reason I chose that is because of the least common denominator is what we rather use so we
    don't invoke any new features in the newer 2012 DNS console that 2008 R2 may not understand.  After that's done, on each DC run (and you can use a PowerShell window to run this):
    Rename the system32\config\netlogon.dns and netlogon.dnb files by suffixing ".old" to the file.
    ipconfig /registerdns
    net stop netlogon
    net start netlogon
    Then re-run the dcdiag /e /c /v.
    Post your results, please.
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.
    I thought the DNS entries were supposed to be the other way around? point to themselves first and a partner as secondary? regardless, as requested, I've changed it to what you've prescribed where they point to the 2008r2 server as the primary with themselves
    as the secondary. I've also followed the steps to what seems like refreshing the DNS? on each of the DCs. Here's the output from dcdiag /e /c /v
    Directory Server Diagnosis
    Performing initial setup:
    Trying to find home server...
    * Verifying that the local machine CM-DC1-NY01, is a Directory Server.
    Home Server = CM-DC1-NY01
    * Connecting to directory service on server CM-DC1-NY01.
    * Identified AD Forest.
    Collecting AD specific global data
    * Collecting site info.
    Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=cmedia,DC=local,LDAP_SCOPE_SUBTREE,(objectCategory
    =ntDSSiteSettings),.......
    The previous call succeeded
    Iterating through the sites
    Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia
    ,DC=local
    Getting ISTG and options for the site
    * Identifying all servers.
    Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=cmedia,DC=local,LDAP_SCOPE_SUBTREE,(objectClass=nt
    DSDsa),.......
    The previous call succeeded....
    The previous call succeeded
    Iterating through the list of servers
    Getting information for the server CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
    ,CN=Configuration,DC=cmedia,DC=local
    objectGuid obtained
    InvocationID obtained
    dnsHostname obtained
    site info obtained
    All the info for the server collected
    Getting information for the server CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
    ,CN=Configuration,DC=cmedia,DC=local
    objectGuid obtained
    InvocationID obtained
    dnsHostname obtained
    site info obtained
    All the info for the server collected
    Getting information for the server CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
    ,CN=Configuration,DC=cmedia,DC=local
    objectGuid obtained
    InvocationID obtained
    dnsHostname obtained
    site info obtained
    All the info for the server collected
    * Identifying all NC cross-refs.
    * Found 3 DC(s). Testing 3 of them.
    Done gathering initial info.
    Doing initial required tests
    Testing server: Default-First-Site-Name\CM-DC1-NY01
    Starting test: Connectivity
    * Active Directory LDAP Services Check
    Determining IP4 connectivity
    * Active Directory RPC Services Check
    ......................... CM-DC1-NY01 passed test Connectivity
    Testing server: Default-First-Site-Name\CM-DC3-NY01
    Starting test: Connectivity
    * Active Directory LDAP Services Check
    Determining IP4 connectivity
    * Active Directory RPC Services Check
    ......................... CM-DC3-NY01 passed test Connectivity
    Testing server: Default-First-Site-Name\CM-DC4-NY01
    Starting test: Connectivity
    * Active Directory LDAP Services Check
    Determining IP4 connectivity
    * Active Directory RPC Services Check
    ......................... CM-DC4-NY01 passed test Connectivity
    Doing primary tests
    Testing server: Default-First-Site-Name\CM-DC1-NY01
    Starting test: Advertising
    The DC CM-DC1-NY01 is advertising itself as a DC and having a DS.
    The DC CM-DC1-NY01 is advertising as an LDAP server
    The DC CM-DC1-NY01 is advertising as having a writeable directory
    The DC CM-DC1-NY01 is advertising as a Key Distribution Center
    The DC CM-DC1-NY01 is advertising as a time server
    The DS CM-DC1-NY01 is advertising as a GC.
    ......................... CM-DC1-NY01 passed test Advertising
    Starting test: CheckSecurityError
    * Dr Auth: Beginning security errors check!
    Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
    Checking machine account for DC CM-DC1-NY01 on DC CM-DC1-NY01.
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local
    * SPN found :LDAP/CM-DC1-NY01
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia
    * SPN found :LDAP/a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/a29d12f1-2869-44bf-8e43-adf7ddf33865/cmedia.local
    * SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC1-NY01.cmedia.local
    * SPN found :HOST/CM-DC1-NY01
    * SPN found :GC/CM-DC1-NY01.cmedia.local/cmedia.local
    [CM-DC1-NY01] No security related replication errors were found on this DC! To target the connection to a
    specific source DC use /ReplSource:<DC>.
    ......................... CM-DC1-NY01 passed test CheckSecurityError
    Starting test: CutoffServers
    * Configuration Topology Aliveness Check
    * Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC1-NY01 passed test CutoffServers
    Starting test: FrsEvent
    * The File Replication Service Event log test
    ......................... CM-DC1-NY01 passed test FrsEvent
    Starting test: DFSREvent
    The DFS Replication Event Log.
    Skip the test because the server is running FRS.
    ......................... CM-DC1-NY01 passed test DFSREvent
    Starting test: SysVolCheck
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC1-NY01 passed test SysVolCheck
    Starting test: FrsSysVol
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC1-NY01 passed test FrsSysVol
    Starting test: KccEvent
    * The KCC Event log test
    Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
    ......................... CM-DC1-NY01 passed test KccEvent
    Starting test: KnowsOfRoleHolders
    Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
    =Sites,CN=Configuration,DC=cmedia,DC=local
    ......................... CM-DC1-NY01 passed test KnowsOfRoleHolders
    Starting test: MachineAccount
    Checking machine account for DC CM-DC1-NY01 on DC CM-DC1-NY01.
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local
    * SPN found :LDAP/CM-DC1-NY01
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia
    * SPN found :LDAP/a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/a29d12f1-2869-44bf-8e43-adf7ddf33865/cmedia.local
    * SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC1-NY01.cmedia.local
    * SPN found :HOST/CM-DC1-NY01
    * SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia
    * SPN found :GC/CM-DC1-NY01.cmedia.local/cmedia.local
    ......................... CM-DC1-NY01 passed test MachineAccount
    Starting test: NCSecDesc
    * Security Permissions check for all NC's on DC CM-DC1-NY01.
    The forest is not ready for RODC. Will skip checking ERODC ACEs.
    * Security Permissions Check for
    DC=ForestDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    DC=DomainDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    (Schema,Version 3)
    * Security Permissions Check for
    CN=Configuration,DC=cmedia,DC=local
    (Configuration,Version 3)
    * Security Permissions Check for
    DC=cmedia,DC=local
    (Domain,Version 3)
    ......................... CM-DC1-NY01 passed test NCSecDesc
    Starting test: NetLogons
    * Network Logons Privileges Check
    Verified share \\CM-DC1-NY01\netlogon
    Verified share \\CM-DC1-NY01\sysvol
    ......................... CM-DC1-NY01 passed test NetLogons
    Starting test: ObjectsReplicated
    CM-DC1-NY01 is in domain DC=cmedia,DC=local
    Checking for CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
    n 3 servers
    Object is up-to-date on all servers.
    Checking for CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
    n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
    Object is up-to-date on all servers.
    ......................... CM-DC1-NY01 passed test ObjectsReplicated
    Starting test: OutboundSecureChannels
    * The Outbound Secure Channels test
    ** Did not run Outbound Secure Channels test because /testdomain: was not entered
    ......................... CM-DC1-NY01 passed test OutboundSecureChannels
    Starting test: Replications
    * Replications Check
    * Replication Latency Check
    DC=ForestDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=DomainDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    ......................... CM-DC1-NY01 passed test Replications
    Starting test: RidManager
    * Available RID Pool for the Domain is 16109 to 1073741823
    * CM-DC1-NY01.cmedia.local is the RID Master
    * DsBind with RID Master was successful
    * rIDAllocationPool is 4609 to 5108
    * rIDPreviousAllocationPool is 4609 to 5108
    * rIDNextRID: 4629
    ......................... CM-DC1-NY01 passed test RidManager
    Starting test: Services
    * Checking Service: EventSystem
    * Checking Service: RpcSs
    * Checking Service: NTDS
    * Checking Service: DnsCache
    * Checking Service: NtFrs
    * Checking Service: IsmServ
    * Checking Service: kdc
    * Checking Service: SamSs
    * Checking Service: LanmanServer
    * Checking Service: LanmanWorkstation
    * Checking Service: w32time
    * Checking Service: NETLOGON
    ......................... CM-DC1-NY01 passed test Services
    Starting test: SystemLog
    * The System Event log test
    A warning event occurred. EventID: 0x0000002F
    Time Generated: 07/08/2014 13:19:14
    Event String:
    Time Provider NtpClient: No valid response has been received from manually configured peer 0.ca.pool.ntp.org
    after 8 attempts to contact it. This peer will be discarded as a time source and NtpClient will attempt to discover a n
    ew peer with this DNS name. The error was: The peer is unreachable.
    Found no errors in "System" Event log in the last 60 minutes.
    ......................... CM-DC1-NY01 passed test SystemLog
    Starting test: Topology
    * Configuration Topology Integrity Check
    * Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC1-NY01 passed test Topology
    Starting test: VerifyEnterpriseReferences
    ......................... CM-DC1-NY01 passed test VerifyEnterpriseReferences
    Starting test: VerifyReferences
    The system object reference (serverReference) CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local
    and backlink on
    CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
    correct.
    The system object reference (serverReferenceBL)
    CN=CM-DC1-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on
    CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
    ia,DC=local
    are correct.
    The system object reference (frsComputerReferenceBL)
    CN=CM-DC1-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
    ......................... CM-DC1-NY01 passed test VerifyReferences
    Starting test: VerifyReplicas
    ......................... CM-DC1-NY01 passed test VerifyReplicas
    Testing server: Default-First-Site-Name\CM-DC3-NY01
    Starting test: Advertising
    The DC CM-DC3-NY01 is advertising itself as a DC and having a DS.
    The DC CM-DC3-NY01 is advertising as an LDAP server
    The DC CM-DC3-NY01 is advertising as having a writeable directory
    The DC CM-DC3-NY01 is advertising as a Key Distribution Center
    The DC CM-DC3-NY01 is advertising as a time server
    The DS CM-DC3-NY01 is advertising as a GC.
    ......................... CM-DC3-NY01 passed test Advertising
    Starting test: CheckSecurityError
    * Dr Auth: Beginning security errors check!
    Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
    Checking machine account for DC CM-DC3-NY01 on DC CM-DC1-NY01.
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local
    * SPN found :LDAP/CM-DC3-NY01
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia
    * SPN found :LDAP/5e9d1971-39ca-484c-922d-411c2364c96e._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e9d1971-39ca-484c-922d-411c2364c96e/cmedia.local
    * SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC3-NY01.cmedia.local
    * SPN found :HOST/CM-DC3-NY01
    * SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia
    * SPN found :GC/CM-DC3-NY01.cmedia.local/cmedia.local
    Checking for CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
    n 2 servers
    Object is up-to-date on all servers.
    [CM-DC3-NY01] No security related replication errors were found on this DC! To target the connection to a
    specific source DC use /ReplSource:<DC>.
    ......................... CM-DC3-NY01 passed test CheckSecurityError
    Starting test: CutoffServers
    * Configuration Topology Aliveness Check
    * Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC3-NY01 passed test CutoffServers
    Starting test: FrsEvent
    * The File Replication Service Event log test
    ......................... CM-DC3-NY01 passed test FrsEvent
    Starting test: DFSREvent
    The DFS Replication Event Log.
    Skip the test because the server is running FRS.
    ......................... CM-DC3-NY01 passed test DFSREvent
    Starting test: SysVolCheck
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC3-NY01 passed test SysVolCheck
    Starting test: FrsSysVol
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC3-NY01 passed test FrsSysVol
    Starting test: KccEvent
    * The KCC Event log test
    Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
    ......................... CM-DC3-NY01 passed test KccEvent
    Starting test: KnowsOfRoleHolders
    Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
    =Sites,CN=Configuration,DC=cmedia,DC=local
    ......................... CM-DC3-NY01 passed test KnowsOfRoleHolders
    Starting test: MachineAccount
    Checking machine account for DC CM-DC3-NY01 on DC CM-DC3-NY01.
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local
    * SPN found :LDAP/CM-DC3-NY01
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia
    * SPN found :LDAP/5e9d1971-39ca-484c-922d-411c2364c96e._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e9d1971-39ca-484c-922d-411c2364c96e/cmedia.local
    * SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC3-NY01.cmedia.local
    * SPN found :HOST/CM-DC3-NY01
    * SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia
    * SPN found :GC/CM-DC3-NY01.cmedia.local/cmedia.local
    ......................... CM-DC3-NY01 passed test MachineAccount
    Starting test: NCSecDesc
    * Security Permissions check for all NC's on DC CM-DC3-NY01.
    The forest is not ready for RODC. Will skip checking ERODC ACEs.
    * Security Permissions Check for
    DC=ForestDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    DC=DomainDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    (Schema,Version 3)
    * Security Permissions Check for
    CN=Configuration,DC=cmedia,DC=local
    (Configuration,Version 3)
    * Security Permissions Check for
    DC=cmedia,DC=local
    (Domain,Version 3)
    ......................... CM-DC3-NY01 passed test NCSecDesc
    Starting test: NetLogons
    * Network Logons Privileges Check
    Verified share \\CM-DC3-NY01\netlogon
    Verified share \\CM-DC3-NY01\sysvol
    ......................... CM-DC3-NY01 passed test NetLogons
    Starting test: ObjectsReplicated
    CM-DC3-NY01 is in domain DC=cmedia,DC=local
    Checking for CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
    n 3 servers
    Object is up-to-date on all servers.
    Checking for CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
    n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
    Object is up-to-date on all servers.
    ......................... CM-DC3-NY01 passed test ObjectsReplicated
    Starting test: OutboundSecureChannels
    * The Outbound Secure Channels test
    ** Did not run Outbound Secure Channels test because /testdomain: was not entered
    ......................... CM-DC3-NY01 passed test OutboundSecureChannels
    Starting test: Replications
    * Replications Check
    * Replication Latency Check
    DC=ForestDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=DomainDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    ......................... CM-DC3-NY01 passed test Replications
    Starting test: RidManager
    * Available RID Pool for the Domain is 16109 to 1073741823
    * CM-DC1-NY01.cmedia.local is the RID Master
    * DsBind with RID Master was successful
    * rIDAllocationPool is 15109 to 15608
    * rIDPreviousAllocationPool is 15109 to 15608
    * rIDNextRID: 15110
    ......................... CM-DC3-NY01 passed test RidManager
    Starting test: Services
    * Checking Service: EventSystem
    * Checking Service: RpcSs
    * Checking Service: NTDS
    * Checking Service: DnsCache
    * Checking Service: NtFrs
    * Checking Service: IsmServ
    * Checking Service: kdc
    * Checking Service: SamSs
    * Checking Service: LanmanServer
    * Checking Service: LanmanWorkstation
    * Checking Service: w32time
    * Checking Service: NETLOGON
    ......................... CM-DC3-NY01 passed test Services
    Starting test: SystemLog
    * The System Event log test
    Found no errors in "System" Event log in the last 60 minutes.
    ......................... CM-DC3-NY01 passed test SystemLog
    Starting test: Topology
    * Configuration Topology Integrity Check
    * Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC3-NY01 passed test Topology
    Starting test: VerifyEnterpriseReferences
    ......................... CM-DC3-NY01 passed test VerifyEnterpriseReferences
    Starting test: VerifyReferences
    The system object reference (serverReference) CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local
    and backlink on
    CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
    correct.
    The system object reference (serverReferenceBL)
    CN=CM-DC3-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on
    CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
    ia,DC=local
    are correct.
    The system object reference (frsComputerReferenceBL)
    CN=CM-DC3-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
    ......................... CM-DC3-NY01 passed test VerifyReferences
    Starting test: VerifyReplicas
    ......................... CM-DC3-NY01 passed test VerifyReplicas
    Testing server: Default-First-Site-Name\CM-DC4-NY01
    Starting test: Advertising
    The DC CM-DC4-NY01 is advertising itself as a DC and having a DS.
    The DC CM-DC4-NY01 is advertising as an LDAP server
    The DC CM-DC4-NY01 is advertising as having a writeable directory
    The DC CM-DC4-NY01 is advertising as a Key Distribution Center
    The DC CM-DC4-NY01 is advertising as a time server
    The DS CM-DC4-NY01 is advertising as a GC.
    ......................... CM-DC4-NY01 passed test Advertising
    Starting test: CheckSecurityError
    * Dr Auth: Beginning security errors check!
    Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
    Checking machine account for DC CM-DC4-NY01 on DC CM-DC1-NY01.
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local
    * SPN found :LDAP/CM-DC4-NY01
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia
    * SPN found :LDAP/37830012-1f10-43c9-a0ff-2a0e8a912187._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/37830012-1f10-43c9-a0ff-2a0e8a912187/cmedia.local
    * SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC4-NY01.cmedia.local
    * SPN found :HOST/CM-DC4-NY01
    * SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia
    * SPN found :GC/CM-DC4-NY01.cmedia.local/cmedia.local
    Checking for CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
    n 2 servers
    Object is up-to-date on all servers.
    [CM-DC4-NY01] No security related replication errors were found on this DC! To target the connection to a
    specific source DC use /ReplSource:<DC>.
    ......................... CM-DC4-NY01 passed test CheckSecurityError
    Starting test: CutoffServers
    * Configuration Topology Aliveness Check
    * Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC4-NY01 passed test CutoffServers
    Starting test: FrsEvent
    * The File Replication Service Event log test
    ......................... CM-DC4-NY01 passed test FrsEvent
    Starting test: DFSREvent
    The DFS Replication Event Log.
    Skip the test because the server is running FRS.
    ......................... CM-DC4-NY01 passed test DFSREvent
    Starting test: SysVolCheck
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC4-NY01 passed test SysVolCheck
    Starting test: FrsSysVol
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC4-NY01 passed test FrsSysVol
    Starting test: KccEvent
    * The KCC Event log test
    Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
    ......................... CM-DC4-NY01 passed test KccEvent
    Starting test: KnowsOfRoleHolders
    Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
    =Sites,CN=Configuration,DC=cmedia,DC=local
    ......................... CM-DC4-NY01 passed test KnowsOfRoleHolders
    Starting test: MachineAccount
    Checking machine account for DC CM-DC4-NY01 on DC CM-DC4-NY01.
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local
    * SPN found :LDAP/CM-DC4-NY01
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia
    * SPN found :LDAP/37830012-1f10-43c9-a0ff-2a0e8a912187._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/37830012-1f10-43c9-a0ff-2a0e8a912187/cmedia.local
    * SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC4-NY01.cmedia.local
    * SPN found :HOST/CM-DC4-NY01
    * SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia
    * SPN found :GC/CM-DC4-NY01.cmedia.local/cmedia.local
    ......................... CM-DC4-NY01 passed test MachineAccount
    Starting test: NCSecDesc
    * Security Permissions check for all NC's on DC CM-DC4-NY01.
    The forest is not ready for RODC. Will skip checking ERODC ACEs.
    * Security Permissions Check for
    DC=ForestDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    DC=DomainDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    (Schema,Version 3)
    * Security Permissions Check for
    CN=Configuration,DC=cmedia,DC=local
    (Configuration,Version 3)
    * Security Permissions Check for
    DC=cmedia,DC=local
    (Domain,Version 3)
    ......................... CM-DC4-NY01 passed test NCSecDesc
    Starting test: NetLogons
    * Network Logons Privileges Check
    Verified share \\CM-DC4-NY01\netlogon
    Verified share \\CM-DC4-NY01\sysvol
    ......................... CM-DC4-NY01 passed test NetLogons
    Starting test: ObjectsReplicated
    CM-DC4-NY01 is in domain DC=cmedia,DC=local
    Checking for CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
    n 3 servers
    Object is up-to-date on all servers.
    Checking for CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
    n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
    Object is up-to-date on all servers.
    ......................... CM-DC4-NY01 passed test ObjectsReplicated
    Starting test: OutboundSecureChannels
    * The Outbound Secure Channels test
    ** Did not run Outbound Secure Channels test because /testdomain: was not entered
    ......................... CM-DC4-NY01 passed test OutboundSecureChannels
    Starting test: Replications
    * Replications Check
    * Replication Latency Check
    DC=ForestDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=DomainDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    ......................... CM-DC4-NY01 passed test Replications
    Starting test: RidManager
    * Available RID Pool for the Domain is 16109 to 1073741823
    * CM-DC1-NY01.cmedia.local is the RID Master
    * DsBind with RID Master was successful
    * rIDAllocationPool is 15609 to 16108
    * rIDPreviousAllocationPool is 15609 to 16108
    * rIDNextRID: 15609
    ......................... CM-DC4-NY01 passed test RidManager
    Starting test: Services
    * Checking Service: EventSystem
    * Checking Service: RpcSs
    * Checking Service: NTDS
    * Checking Service: DnsCache
    * Checking Service: NtFrs
    * Checking Service: IsmServ
    * Checking Service: kdc
    * Checking Service: SamSs
    * Checking Service: LanmanServer
    * Checking Service: LanmanWorkstation
    * Checking Service: w32time
    * Checking Service: NETLOGON
    ......................... CM-DC4-NY01 passed test Services
    Starting test: SystemLog
    * The System Event log test
    Found no errors in "System" Event log in the last 60 minutes.
    ......................... CM-DC4-NY01 passed test SystemLog
    Starting test: Topology
    * Configuration Topology Integrity Check
    * Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC4-NY01 passed test Topology
    Starting test: VerifyEnterpriseReferences
    ......................... CM-DC4-NY01 passed test VerifyEnterpriseReferences
    Starting test: VerifyReferences
    The system object reference (serverReference) CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local
    and backlink on
    CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
    correct.
    The system object reference (serverReferenceBL)
    CN=CM-DC4-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on
    CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
    ia,DC=local
    are correct.
    The system object reference (frsComputerReferenceBL)
    CN=CM-DC4-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
    ......................... CM-DC4-NY01 passed test VerifyReferences
    Starting test: VerifyReplicas
    ......................... CM-DC4-NY01 passed test VerifyReplicas

  • Uploading the Cost to Network - Activities in Cut over

    Hi All,
    As a part of Cut over activities, Is that possible to upload actual cost to Network - activities in Producion environment?
    As a best practice, till now in my projects, I have uploaded the Intial cost to WBS only.
    Regards
    Prabu K

    Hi Abdul,
    While using KAFD, we can post legacy or historical actual cost.
    The most important this is that, define one WBS element in your project structure and name it as Historical WBS element which will receive all your legacy costs. By doing so, we are posting all our legacy costs to One WBS element only.
    Here what you have to do is difine the Historical cost elements which are used only for these migrated projects and not for regular opeative structures.
    Input the current period - current period always be in which period project is being migrated.
    then input the Year - in our case we have not defined multiple years but as a lumpsum amount in current year (the year project is migrated)  that will stay as historical cost. You will not see any break up of historical costs in SAP but you can see break up of actual coss in legacy system.
    Hope this clarifies and let me know if you need any further inputs.
    Regards,
    PSR
    Edited by: PSR on Oct 10, 2011 4:09 PM
    Edited by: PSR on Oct 10, 2011 4:29 PM

  • Error occured while posting the job schedule for JDBCAdapter

    Hi Experts,
    In Application Log in Path: "/usr/sap/<SID>/DVExxxx/j2ee/cluster/server1/log", I see the error:
    #/Applications/ExchangeInfrastructure/AdapterFramework/Services/Util
    ##com.sap.aii.af.service.scheduler.SchedulerManagerImpl.postJobScheduleOthers(String, int)
    #J2EE_GUEST#0##n/a##f7956e1f6b4711e0b851001e0b5d3ac8#SAPEngine_Application_Thread[impl:3]_23##0#0
    #Error#1#com.sap.aii.af.service.scheduler.SchedulerManagerImpl#Plain
    ###error occured while posting the job schedule for JDBCAdapter_9f0584b1bcb33b94b67ada456233bcb8 with 2#
    Frequently are created Lock's and I need remove them in Visual Admin.
    Any idea about this error?
    Tks in advance.

    Hi,
    After applying the SP 23 Patch Level 08, LOCK JDBC problems stopped.
    But now when a network error or database error, the JDBC Sender Communication channels that were open to connection, are blocked.
    Even following the instructions in [SAP Note 1083488 - XI FTP_JDBC sender channel stop polling indefinitely (04_04S)|https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1083488] the problem continues.
    I've already set the parameter "taskTimeout" and selected the option "Disconnect from Database After Each Message Processing" but not resolved.
    Any ideas?
    Thanks in advance.

  • No Network given for transaction 0020

    While posting invoice (tcode MIRO) against PO, i am having error "No Network Given for transaction 0020". The PO is having account assignment "N" Network and 0020 is the activity number.
    Any idea how to resolve this.
    Regards,
    Shahzad Shakoor

    Have you provided the network number in the account assignment tab? Or is it not visible (in this case you need to check the configuration of account assignment category, it contains the field selection).
    Regards,
    Aroop

Maybe you are looking for