MM stock vaule help req?

hi
I need to develop a reprot for the stock for a material/plant/month.
The selction-screen:1.material,2.plant,3.purch grp,4.month
output:PLANT,MATERIAL,PURCH GRP,OPENING BAL(Total Stock avaible/month),ISUUE STOCK VALUE(/month),CLOSING BLANCE(Total Stock availabele/month).
This reprot has to display the monthly data for the material's stock available & issued per month.
I don't hv much knowlegde for stock related tables & fileds.
can any one help me in this regards,to get th data frm whcih tables,filed..so that i can start the reprot.i had seen the TCODE:MC.9,got some info frm it,but still not clr very much.
PLZ reply accordingly.
rgds
Vipin

Hi!
The actual stock can be read from table MARD.
For historical data, you can use MARDH.
The purchasing group and the othere material master data stuff can be read from MARA, or MARC tables.
Regards
Tamá

Similar Messages

How to create STPR(Stock Trasnsfer Pruchase Req) in MRP Run

Hello PP Guru ,
I am running MRP in various branch-plant .I maintained Special Procurement Key 40 for all the material in branch-plant .Here we have one supply plant .We run MRP at Supply plant once all our other branches(plant) completes their MRP run .My requirement is
1.How to create STPR/STPO while running MRP at branches ? I did not find any option in MD01 to create STPR/STPO while executing MRP at plant level.Is there any configuration seting required?
2.How to create PR/PO in Supplying plant (Central plant) so that it will consider all the branches STPR/STPO and show List of PR in MD04 ?
Thanks and regards
Jia

Hi Jia,
Yes, there is some special setup for Stock Transport orders. There are some business decisions you must make first. Pls refer to [Stock transport orders|http://help.sap.com/saphelp_erp60_sp/helpdata/EN/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm] for basic functionality in helping you to make your decisions.
For configuration settings, refer to
[Purchasing IMG|http://help.sap.com/saphelp_46c/helpdata/en/32/72369adc56d11195100060b03c6b76/frameset.htm] then Purchase Order>Set up Stock Transport order.
and
[Purchasing IMG|http://help.sap.com/saphelp_46c/helpdata/en/32/72369adc56d11195100060b03c6b76/frameset.htm] then Purchase Requisition>Set up Stock transport Requisition.
These steps can be reached in IMG>MM>Purchasing>Purchase order>Set up Stock transport order, and
IMG>MM>Purchasing>Purchase Req>set up Stock transport requisition.
For question 2, there is no special setup. Once your STOs/STRs are properly set up, you will see new requirements in your central plant, which represent the un-fulfilled requirements from the branch plants. Assuming that you already have set up MRP in the central plant, MRP will create new proposals (pureqs or plndords) just as if all of these new requirements were new sales orders.
Rgds,
DB49

Special stock indicator in req type

Hi all,
Can anyone tell where is the settings given for the special stock indicator E in Req type KE...
Regards,
Joseph.

Dear Joseph,
I guess this material must be planned using the planning strategy 20,for which after taking a MRP run,the system proposes a
planned order of order type KD and account assignment category as with E.
check the configuration settings for the account assignment category in T.code OPPS for the planning strategy 20.
and for this planning strategy planned materials the system creates planned order for the order type KD - individual customer
order.
Check and revert back.
Regards
Mangalraj.S

0IC_C03 Inventory stock- Please help

Dear all.
We have compressed the cube 0IC_C03 with the "No Marker Update" option selected. Now we found out that our stock reports are not working fine any more.
we are not sure if running the compresion with this tick is the one causing the issue. Is it a problem to do it so when our reports use the non-agregated keyfigures?
Is there any way to reset the Mark up so that it is reacalculated based on the new situation (compressed requests) of the cube.
I would appreciate any answer since our users are not able to report correct figures any more.
Thanks a lot in advance for any help.
Best regards,
Alfonso.

Dear All.
Thanks a lot to all for your answers, unfortunatelly noone gave me the answer I was waiting for, i guess because it is not available. I was expecting that SAP would have provided a program to fix this can of issues by allowing to recalculate fully the reference tabel based on some selections or criteria. Unfortunatelly looks like this is not the case (as always SAP providing great service).
For future reference of anyone, our final decision is to make a copy of the original cube, move all data to the new cube and compress there, and then delte the old cube. This is easelly done, thecnically no issues, the only problem you might find is that you have all your queires over the cube (they can also be easelly copied), not our case since we use multicube.
Other porposals i got were:
1.- Delete cube and reload all PSA (not realistic, more than 1700 request currently in the cube
2.- Reload from R/3. Rediculous, it would require downtime and huge amount of time to reload
3.- compres the rest of the request with "NO update marker" settin on, and then load stock initialization with BX . Possibel solution but will require downtime from R/3 again, we donñt use up to know BX so it will require additional develoment and testing.
Best regards,
Alfonso Gonzalez.

Stock book help needed - want to remove file names

Well, I'm trying to put together my first book from Aperture and chose the Stock theme for a book of family photos and I can't for the life of me figure out how to remove the file names which appear at the bottom of every image on the pages. Anyone able to point me in the right direction?

Hello Tom,
There may be a quicker way, but if you just click on the "Edit layout" button (which is along the toolbar just to the right of the writing "stock book", it is the square with the dotted outline). Once you click on this, you can change all sorts of things, including the size of photo boxes and, if you just click on the file names, the filename text box will appear and you can then just hit delete.
Hope this helps.
Best regards
Paul

BDC help req??

Hi
Can any one tell me to use 2 BDC simultaneously at a time in 1 single report.
I had an req like to make a BDC for MIGO & same time after its done the BDC for Tcode J1IEX has to be called,so can any one tell me some info for it.
As its a reprot programing,I need to disply the final data like GRN No. after MIGO had been done & Exc Invoice No after J1IEX had been done on a single page in an ALV form .
Please help me in this,I had made a reprot for it,but I am not able to make 2 BDC working at the same time.
So plz tell me how to do ??
Regds

Hi,
I had done in my previous project, that was production order creation, conformation and one more. You can check is there any BAPI's exist for you to update the data.
Rgds,
Bujji

SD Sales BOM and Stock Movement--Help please

Hi,
Scenario:
Client is dealing with Value packs. i.e. He creates a finish good by using 2 finish goods as components by creating Sales BOM.
Basic Requirement: To have component level treatment i.e. pricing delivery to be incorporated for components.
Item cat grp selected as LUMF for BOM parent Item in material master.
But the requirement is that stock movements should reflect for both parent as well as BOM materials upon PGI. Header stock is required to check the stock availibity.
By this approach no movements can be seen for parent which will give a wrong picture of the stock positions for Parent Material.
How this can be handled whereby we can see the stock movements for both Parent as well as components.
Please suggest
Regards,
manOO

Hi,
Please Use Two Different Item Categories and Schedule Line Categories in this Scenarios and Please ensure that both should be relevant for Delivery.
Hope this sloves your Puprose and Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Urgent help req : work item id not getting passed in the method

Hi ,
I have created a subtype zcats of business object CATS and delegated it .
I have created a new method Approve1 ( with attributes SYNCRONUS & DIALOG ) in zcats which is similar in coding to Approve method of CATS ( DIALOG) .
I have include the method Approve1 of business object zcats in a standard task .
The problem is that when the eorkflow gets triggered , the workitem id is not getting passed in the method APProve1 of zcats.
Can someone please help me with this .
Points would surely be awarded .

BEGIN_METHOD APPROVE1 CHANGING CONTAINER.
DATA: WORKITEMID_IMP LIKE OBJECT-KEY-ITEMID.
DATA: WI_CHCKWI LIKE SWWWIHEAD-WI_ID.
DATA: WORKITEM TYPE SWC_OBJECT.
   <u> WORKITEMID_IMP = OBJECT-KEY-ITEMID</u>.
    SWC_GET_ELEMENT CONTAINER '_WORKITEM' WORKITEM.
    SWC_GET_PROPERTY WORKITEM 'WorkitemReference' WI_CHCKWI.
    IF SY-SUBRC EQ 0 AND NOT WI_CHCKWI IS INITIAL.
      WORKITEMID_IMP = WI_CHCKWI.
    ENDIF.
    CALL FUNCTION 'CATS_WF_APPROVAL'
      EXPORTING
        WORKITEMID_IMP = WORKITEMID_IMP
      TABLES
        CONT_IMP = CONTAINER.
END_METHOD.
hi ,
the above is the code in the method .
At the first step of execution underlined above , the work item id is appearing blank .
I think that the value is not passed to the container , but i am not sure og how to pass data to this conatiner

Issue in WAD Dropdown box functionality. Help req.

Hello,
Issue in WAD and Bex.
I have two dropdown boxes in the web templates, for ex cost center and controlling area.
DDBox1: Controlling Area.
DDBox2: Cost center.
Step1: I am selecting Controlling area 4002
Step2: I am selecting cost center 691
Step3: Now I want to change the cost center to 4001.
When I change the cost center to 4001 in Dropdown box1
the filter(Selected value 691) set in the Dropdown 2(for cost center) is not removed or reset,
so that it shows no applicable data found even though there is data for the controlling Area 4001(DDBox2)
Some one please guide me to solve this
Thanks in advance!
Kind regards
RaM

Hello,
Some one please help me on this topic.
If any further informations required i can give .
Thanks
RaM

Urgent Help Req.: Exception=ORABPEL-11162 Error while reading native data

Hi All,
I am getting below error: Exception=ORABPEL-11162
Error while reading native data.
[Line=6, Col=7|http://forums.oracle.com/forums/] Not enough data available in the input, when trying to read data of length "22" for "element with name PurOrderNum" from the specified position, using "style" as "fixedLength" and "length" as "22".
Ensure that there is enough data from the specified position in the input.
Let me also give you the brief scenario of what I am trying to achieve.
INTERFACE FUNCTIONING:_
I have an interface which reads the records in a file in a chunk through ChunkRead adapter and and after one successful reading if chunk it calls the DB adapter to insert the records in the table.
Now these records are committed and next chunk is read and the process goes on till all the records are read.
After this the API is called which does the processing of these records.
Inserting records in the DB is a XA transaction which means if anything goes wrong while inserting the data, the records which are added earlier are rolled back.
ISSUE:_
Now the issue comes when I do the negative testing. Since my file is based on fixed length schema., I change the length of last record from 15 to 13. (say total are 10 records)
Now what happens is when chunkread tries to read the record of 15 length it gets only 13 characters and hence ignores the records.
But the chunkread reads all other 9 records correctly and sends this to DB adapter which now inserts them correctly in the DB.
But being a global transaction I want that if any record is missing from DB in comparison to those in file then whole transaction should roll back.
So I am unable to make this whole process as global transaction. This is because the ChunkRead adapter inspite of detecting the error doesn’t throw it back.
Moreover if this problem occurs in say next chunk then also I am unable to find out how to rollback the whole transaction. Because the first chunk was correct.
So basically two concerns are there:+
How to detect that chunkread adapter has missed one record?+
Secondly, If it’s detected then how should I rollback the transaction that caused earlier records to enter into database?+
Please let me know if anyone has faced this issue earlyer and how it got resolved. Any pointers regarding this would be of great help.
Also attached is the chunkread log for reference.
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.466-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: FileRejector::rejectTextualMessage errList=[oracle.tip.pc.services.translation.xlators.nxsd.ErrorList@a5213b]</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.466-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: FileRejector::rejectTextualMessage badCount=[1]</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.467-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: Rejecting message fileName=/rh01/s01/n01/Distributions/B2B/Gentran/In/855/Test.txt, startLine=4, startColumn=1, endLine=-1, endCol=-1, Exception=ORABPEL-11162
Error while reading native data.
[Line=6, Col=7] Not enough data available in the input, when trying to read data of length "22" for "element with name PurOrderNum" from the specified position, using "style" as "fixedLength" and "length" as "22".
Ensure that there is enough data from the specified position in the input.
}</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
PFB the version details :
SOA suite version : 10.1.3.3.1 and JDEV : 10.1.3.3
Edited by: SOA Team on Oct 6, 2008 10:48 PM

Just a thought, you could set the terminator for the last field as {eol} instead of length, this means that it should read the last field regardless of the length.
Depending on the logic of Db adapter the error could be traped due to incorrect length.
If the file starts each row with a constant(s), e.g. 01 then you can terminate the previous line on that, this is the better option but relys on the file format.
The other option is a little thing call compensation, ouch. Basically this allows you to back out commited rows but you have to provide all the logic, it is generally something people avoid because of the complexity.
cheers
James

Help req in Seeburger SFTP adapter

Hi All,
            I have a scenario where i need to send a file to SFTP server. I used Seeburger SFTP adapter to connect to SFTP.
          This is a pass through interface and i havent used any party at the confiuration( normal configuration without party)
             In SFTP channel @ modules i configured it as:
localejbs/Seeburger/solution/<solutionName>            Local Enterprise Bean                solutionid
localejbs/ModuleProcessorExitBean                            Local Enterprise Bean               exit
Module Key                                    Parameter Name                                   Parameter Value
exit                                                 JNDIName                                    deployedAdapters/SeeXISFTP/shareable/SeeXISFTP
When i test the scenario i facing the following error in the receiver communication channel( SFTp Adapter) @ RWB
Delivering the message to the application using connection SFTP_http://seeburger.com/xi failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of ModuleProcessorExitB ean..
Can someone please help how to resolve this problem.
Thanks,
Siva

Hi,
can you share how you solved this issue? i am having the same issue with the sftp and receiving the same error.
Thanks in advance.

DEV 6.0 team : Help req while running forms on the WEB

I am using Windows NT 4.0 with Service pack 3 running Oracle8
8.0.5 with Apps Server 4.0.7 and Dev6.0. I have been able to run
Forms on the web and with Jinitiator and with out Jinitiator but
there are a few problems
1 ) The Tigger " When Mouse Click" does not fires on the web for
a display item.
2) when i set the CLASSPATH=E:\orant\forms60\java for forms the
tree in OAS 4.0.7 stops showing and if i remove it from there
then i am not able to run the forms for web through the forms
designer
3) the performnce is very slow how to improve the performance on
Web with jinitiator.
an early response would be appreciated
null

mobeen (guest) wrote:
: I am using Windows NT 4.0 with Service pack 3 running Oracle8
: 8.0.5 with Apps Server 4.0.7 and Dev6.0. I have been able to
run
: Forms on the web and with Jinitiator and with out Jinitiator
but
: there are a few problems
: 1 ) The Tigger " When Mouse Click" does not fires on the web
for
: a display item.
: 2) when i set the CLASSPATH=E:\orant\forms60\java for forms
the
: tree in OAS 4.0.7 stops showing and if i remove it from there
: then i am not able to run the forms for web through the forms
: designer
: 3) the performnce is very slow how to improve the performance
on
: Web with jinitiator.
: an early response would be appreciated
I can only speculate on some of your issues, but maybe they
might give you some insight on possible alternatives.
Mouse-Click on Display Item
The display item does not, by definition allow modification.
Have you tried changing the item to text and then disabling the
INSERT and UPDATE properties to NO? I have tried using display
items in the past, resulting in a grayed-out box on the web. To
get around this, I made the above changes and created a mouse
trigger to jump to another field when someone tried to mouse-
click on it.
Changing CLASSPATH on OAS 4.0.7
I had the same results. The OAS installation sets the CLASSPATH
to what it needs and changing it has the results you describe.
I am curious, however, are you able to view the form from the
Developer Forms Designer using the other CLASSPATH. I have not
been able to use this feature at all. I read somewhere that
this functionality is not available in the beta version. I
would appreciate any information that you can share.
Jinitiator Performance
Assuming that you have already tried cache settings and short of
the users having faster machines with more memory, faster web
access, etc. I don't think there is much we can do but wait for
Oracle and Sun to make enhancements.
I have had some success with using IE 5.0 (beta) directly
without the Jinitiator. My web applications load and run a
whole lot faster using the same configuration that you describe.
It might be worth another look!
Hope this helps.
Michael Shannon
[email protected]
null

Help Req: Refreshing Screen

Hi Folks,
Could anyone from amongst you let me know if we can refresh contents of screen after a stipulated time. e.g. after every 5 minutes i need to refresh a screen.
Please let me know if it is possible and if so could you also send me some demo code so that i can understand what is done in order to achieve it.
Regards,
Im

Hi,
Check this link:
http://www.sap-img.com/fu014.htm
This ABAP program will automatically update a report every 30 seconds while it is on the screen
at the same time keeping the GUI screen buttons active.
Reward if it helps.
Thanks,
Swati

[HELP REQ] [DEPLOYMENT ERROR]Silverlight Sharepoint 2010 Webpart Applicaiton [ERROR WHEN I DEPLOY] [HELP REQ]

**This solution contains no resources scoped for a web application and cannot be deployed to a particular web application.**
That is the error I get when I try to deploy the site I get this error. I have tried adding a element file but I am not too sure if I have done it correct. Either way no matter what and how I try to add this to my server when I do the following
commands it returns me this error.
Commands
Add the feature:
Add-SPSolution c:\sp2010\srg.wsp
Install:
**Install-spsolution -identity srg.wsp -webapplication http://my.kpl.gov <http://my.kpl.gov/> -gacdeployment** -THIS IS THE COMMANDS THAT CREATES THE ERROR-

Hi PsychoticcWMU,
Thank you for supporting MSDN forum.
I would like to move this question to a more approximate forum for a better support.
Thanks for your understanding.
--James
<THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
Thanks
MSDN Community Support
Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

MM help REQ??

Hi
I need to change the O/P format for the TCode-ME56,SAP standard O/P is of 3-liner,I need to change it to 1-line.I had never done anything like this,I need some help?
Plz if any one has idea to change the O/P using badi/exits plz tell me,even I had not workwed any time with badi/exits.so i need some help?
I had found thet,all the write staments/internal table dec. all are done in enhanceemnts inn this tcode,so its quite diff gfor me to understand frm where to start..plz help me in this regard.
regds.

Hi Vipin,
Check table EBAN for purchase requistion. in this table, if EBAKZ field is set to X. It's means the purchase requistion is closed against purchase order.
Besides, ask your functional guy which fields are require for that report.
Hope it will solve your problem.
Regards
Krishnendu

MM stock vaule help req?

Similar Messages

Maybe you are looking for